summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2008-04-30char: fix sparse shadowed variable warnings in esp.cHarvey Harrison
flags only use was in spin_lock_irqsave/spin_lock_irgrestore pairs, no need to redeclare for each one. drivers/char/esp.c:1599:17: warning: symbol 'flags' shadows an earlier one drivers/char/esp.c:1517:16: originally declared here drivers/char/esp.c:1615:17: warning: symbol 'flags' shadows an earlier one drivers/char/esp.c:1517:16: originally declared here drivers/char/esp.c:1631:17: warning: symbol 'flags' shadows an earlier one drivers/char/esp.c:1517:16: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, add firmware loading fixJiri Slaby
Be more verbose on fw load fail as noted by Oyvind. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, update creditsJiri Slaby
- update version - update maintainers - copyright the stuff Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, notify about board readinessJiri Slaby
Drop a message to dmesg about card being ready. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, introduce MOXA_IS_320 macroJiri Slaby
It allows to simplify the code, especially MoxaPortSetBaud. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, remove useless tty functionsJiri Slaby
- moxa_flush_chars -- no code; ldics handle this well - moxa_put_char -- only wrapper to moxa_write (same code), tty does this the same way if tty->driver->put_char is NULL Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, little cleanupJiri Slaby
Cleanup of - whitespace - macros - useless casts - return (sth); -> return sth; - types - superfluous parenthesis and braces - init tmp directly in moxa_get_serial_info - commented defunct code - commented prototypes - MOXA/moxa printk case Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, rework open/closeJiri Slaby
- add locking to open/close/hangup and ioctl (tiocm) - add pci hot-un-plug support (hangup on board remove, wait for openers) - cleanup block_till_ready - move close code common to close/hangup into separate function to be able to call it from open when hangup occurs while block_till_ready - let ldisc flush on tty layer, it will do it after we return Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, serialise timerJiri Slaby
- del timer after we are sure it won't be fired again - make timer scheduling atomic - don't reschedule timer when all cards have gone Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, cleanup rx/txJiri Slaby
- cleanup types - use tty_prepare_flip_string and io memcpys Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, merge 2 poll functionsJiri Slaby
- merge 2 timers into one -- one can handle the emptywait as good as the other - merge 2 separated poll functions into one, this allows handle the actions directly and simplifies the code Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, ioctl cleanupJiri Slaby
- allow stats only for sys_admin - move TCSBRK* processing to .break_ctl tty op - let TIOCGSOFTCAR and TIOCSSOFTCAR be processed by ldisc - remove MOXA_GET_MAJOR, MOXA_GET_CUMAJOR - fix jiffies subtraction by time_after - move moxa ioctl numbers into the header; still not exported to userspace, needs _IOC and 32/64 compat cleanup anyways Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, timer cleanupJiri Slaby
- schedule timer even after some card is installed, not after insmod - cleanup timer functions Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, centralize board readinessJiri Slaby
The only relevant sign of port being ready is its board->ready since now. Remove all other flags for this purpose which are set almost on the same place. Move ports inside the board to be sure that nobody will grab reference to the port without being sure that it exists. [jirislaby@gmail.com: fix unused var warning] Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, remove unused port entriesJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, remove port->portJiri Slaby
We don't need to hold a reference to port index. In most cases we need port structure anyway and index is available in port->tty->index. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, merge c2xx and c320 firmware loadingJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, add firmware loadingJiri Slaby
Substitute ioctl load firmware interface by kernel firmware api. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, fix TIOC(G/S)SOFTCAR paramJiri Slaby
according to ioctl_list, both have int * as a param, not ulong *. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, pci io space fixupJiri Slaby
- request region before remapping pci io space - use ioremap, iounmap istead of iomap interface, because we use readX/writeX for accessing this space because of isa support Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, cleanup module-param passed isa initJiri Slaby
Make the code more readable, remap the base address directly. Describe module parameters. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, remove static isa supportJiri Slaby
Static ISA field is empty and probably will never be filled in, remove it. The driver still supports ISA cards passed through module parameter. This actually fixes one bug inside the initialization of module-param passed cards initialization. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30SGI Altix mmtimer: allow larger number of timers per nodeDimitri Sivanich
The purpose of this patch to the SGI Altix specific mmtimer (posix timer) driver is to allow a virtually infinite number of timers to be set per node. Timers will now be kept on a sorted per-node list and a single node-based hardware comparator is used to trigger the next timer. [akpm@linux-foundation.org: mark things static] [akpm@linux-foundation.org: fix warning] Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30tty: drop the BKL for driver/ldisc ioctl methodsAlan Cox
Now we have pushed the lock down we can stop wrapping the call with a lock in the tty layer. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30tty_ioctl: soft carrier handlingAlan Cox
First cut at moving the soft carrier handling knowledge entirely into the core code. One or two drivers still needed to snoop these functions to track CLOCAL internally. Instead make TIOCSSOFTCAR generate the same driver calls as other termios ioctls changing the clocal flag. This allows us to remove any driver knowledge and special casing. Also while we are at it we can fix the error handling. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30tty_ioctl: locking for tty_wait_until_sentAlan Cox
This function still depends on the big kernel lock in some cases. Push locking into the function ready for removal of the BKL from ioctl call paths. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30tty_io: fix remaining pid struct lockingAlan Cox
This fixes the last couple of pid struct locking failures I know about. [oleg@tv-sign.ru: clean up do_task_stat()] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Resume TTY on SUSP and fix CRNL order in N_TTY line disciplineJoe Peterson
Refine these behaviors in the N_TTY line discipline: 1) Handle the signal characters consistently when received in a stopped TTY so that SUSP (typically ctrl-Z) behaves like INTR and QUIT in resuming a stopped TTY. 2) Adjust the order in which the IGNCR/ICRNL/INLCR processing is applied to be more logical and consistent with the behavior of other Unix systems. Signed-off-by: Joe Peterson <joe@skyrush.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30redo locking of tty->pgrpAlan Cox
Historically tty->pgrp and friends were pid_t and the code "knew" they were safe. The change to pid structs opened up a few races and the removal of the BKL in places made them quite hittable. We put tty->pgrp under the ctrl_lock for the tty. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30tty: BKL pushdownAlan Cox
- Push the BKL down into the line disciplines - Switch the tty layer to unlocked_ioctl - Introduce a new ctrl_lock spin lock for the control bits - Eliminate much of the lock_kernel use in n_tty - Prepare to (but don't yet) call the drivers with the lock dropped on the paths that historically held the lock BKL now primarily protects open/close/ldisc change in the tty layer [jirislaby@gmail.com: a couple of fixes] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30serial_core: Prepare for BKL push downAlan Cox
Instead of checking for the BKL in these methods, take it ourselves. That avoids propogating it into the serial drivers and we can then fix them later on. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-3068360serial: Note that there isn't any info->mcr lockingAlan Cox
Noticed while auditing the code for the BKL elimination project Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30isdn_tty: Prepare for BKL push downAlan Cox
Three things here - Remove softcar handler - Correct termios change detection logic - Wrap break/ioctl in lock_kernel ready to drop it in the caller Signed-off-by: Alan Cox <alan@redhat.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30vt_ioctl: Prepare for BKL push downAlan Cox
This one could do with some eyeballs on it. In theory it simply wraps the ioctl handler in lock/unlock_kernel ready for the lock/unlocks to be pushed into specific switch values. To do that means changing the code to return via a common exit path not all over the place as it does now, hence the big diff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30viocons: BKL lockingAlan Cox
For some weird reason I can't ascertain (translation "I think its broken") the viocons driver calls directly into the n_tty ldisc code even if another ldisc is in use. It'll probably break if you do that but I'm just fixing the locking and adding a comment that its horked. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30synclink series: Prepare for BKL pushdownAlan Cox
As these are quite complex I've simply pushed the BKL down into the ioctl handler not tried to do anything neater. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30sx: prepare for BKL pushdownAlan Cox
Wrap the ioctl handler, and in this case the break handler also in the BKL. Remove bogus softcar handlers. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30stallion: Prepare for BKL push downAlan Cox
Remove broken softcar functions, wrap ioctl handler in BKL Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30specialix: Prepare for BKL pushdownAlan Cox
Lock the ioctl handlers and remove bogus softcar handling. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30serial167: prepare to push BKL down into driversAlan Cox
Kill the softcar handlers again, wrap the ioctl handler in the BKL Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30rocket: Prepare for BKL pushdownAlan Cox
Wrap the ioctl code in lock_kernel calls Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30riscom8: Prepare for BKL pushdownAlan Cox
Push the locking down into a couple of functions that need it and remove bogus TIOCG/SSOFTCAR handling Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30mxser: prepare for BKL pushdownAlan Cox
Push the BKL down into various internal routines in the driver ready to remove it from the break, ioctl and other call points. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30isicom: istallion prepare for lock_kernel pushdownAlan Cox
This is an ancient driver so just wrap it in lock_kernel internally and be done. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30isicom: prepare for lock_kernel push downAlan Cox
Again lock the bits we can't trivially prove are safe without the BKL and remove the broken TIOCS/GSOFTCAR handler. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30esp: lock_kernel push downAlan Cox
Push the BKL down into a few internal bits of code in this driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30epca: lock_kernel push downAlan Cox
Prepare epca for removing the lock from above. Most of epca is internally locked so we can trivially push it down to a few bits of code. Drop the TIOCG/SSOFTCAR handling as that is done *properly* with locks by the mid layer. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30cyclades: Prepare for relaxed locking in callersAlan Cox
Basically wrap it in lock_kernel where it is hard to prove the locking is ok. Signed-off-by: Alan Cox <alan@redhat.com> Cc: "John Stoffel" <john@stoffel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30amiserial: prepare for locking relaxation in callerAlan Cox
Just wrap this one in a lock_kernel. As I understand it there is no M68K SMP anyway. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30ptrace: permit ptracing of /sbin/initOleg Nesterov
Afaics, currently there are no kernel problems with ptracing init, it can't lose SIGNAL_UNKILLABLE flag and be killed/stopped by accident. The ability to strace/debug init can be very useful if you try to figure out why it does not work as expected. However, admin should know what he does, "gdb /sbin/init 1" stops init, it can't reap orphaned zombies or take care of /etc/inittab until continued. It is even possible to crash init (and thus the whole system) if you wish, ptracer has full control. See also the long discussion: http://marc.info/?t=120628018600001 Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-26 09:56:17 +0000