summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-02-16CAPI: Drop remaining NULL checks on tty->driver_dataJan Kiszka
tty_struct's driver_data cannot be NULL, no need to test for it. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Use tty_port to keep track of capiminor's ttyJan Kiszka
Use the reference management features of tty_port to look up and drop again the tty_struct associated with a capiminor. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Establish install/cleanup handlers for capiminor TTYsJan Kiszka
Properly associate/disassociate a capiminor object with its TTY via the install/cleanup handlers instead of trying to guess first open and last close. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Use kref on capiminorJan Kiszka
Install a reference counter for capiminor objects. Acquire it when obtaining a capiminor from the array during capinc_tty_open, drop it when closing the tty again. Another reference is held for the hook-up with capincci. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Use dynamic major for NCCI TTYs by defaultJan Kiszka
No need to allocate a fixed major for this TTY, both capifs and udev make this transparent to the user. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Dynamically register minor devicesJan Kiszka
Register capiminors dynamically with the TTY core so that udev can make them show up as the NCCIs appear or disappear. This removes the need to check if the capiminor requested in capinc_tty_open actually exists. And this completely obsoletes capifs which will be scheduled for removal in a later patch. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Clean up capinc_tty_init/exitJan Kiszka
Return proper error code if tty_register_driver fails. In contrast, tty_unregister_driver cannot practically fail, so drop that error handling. Finally, mark capinc_tty_init/exit with __init/__exit. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Switch capiminor list to arrayJan Kiszka
Using a plain array of pointers simplifies the management of capiminors. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Switch NCCI list to standard doubly linked listJan Kiszka
Replace open-coded NCCI list management with standard mechanisms. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Fix racy capi_readJan Kiszka
capi_read still used interruptible_sleep_on, risking to miss a wakeup this way. Convert it to wait_event_interruptible. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Use non-atomic allocation during NCCI setupJan Kiszka
Both capincci_alloc and capiminor_alloc run in non-atomic context, update their memory allocations accordingly. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rework locking of capidev membersJan Kiszka
Rename 'ncci_list_mtx' to 'lock', expressing that it now protects a larger set of capidev members: the NCCI list, ap.applid (ie. the registration of the application), and modifications of userflags. We do not need to protect each and every check for ap.applid because, once an application is registered, it will stay for the whole lifetime of the device. Also, there is no need to apply the capidev mutex during release (if there could be concurrent users, we would crash them anyway by freeing the device at the end of capi_release). Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Clean up capi_open/releaseJan Kiszka
Fold capidev_alloc and capidev_free into capi_open and capi_release - there are no other users. Someone pushed a lock_kernel into capi_open. Drop it, we don't need it. Also remove the useless test from open that checks for private_data == NULL. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Convert capidev_list_lock into a mutexJan Kiszka
No need for anything "harder" here (specifically no need for irqsave...). Also, make the list removal the first operation of capidev_free to avoid dumping half-released devices via /proc. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Reduce #ifdef mess around CONFIG_ISDN_CAPI_MIDDLEWAREJan Kiszka
Make the code a bit more readable be providing stub functions for the !CONFIG_ISDN_CAPI_MIDDLEWARE case. Though a few lines are moved around, this comes with no functional changes. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rework application lockingJan Kiszka
Drop the application rw-lock in favour of RCU. This synchronizes capi20_release against capi_ctr_handle_message which may dereference an application from (soft-)IRQ context. Any other access to the application list is now protected by the capi_controller_lock as well. This also allows to safely inspect applications for /proc dumping by holding capi_controller_lock. At this chance, drop some useless release_in_progress checks where we obtained the application pointer from the list (which becomes NULL on release_in_progress). Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rework locking of controller data structuresJan Kiszka
This patch applies the mutex so far only protecting the controller list to (almost) all accesses of controller data structures. It also reworks waiting on state changes in old_capi_manufacturer so that it no longer poll and holds a module reference to the controller owner while waiting (the latter was partly done already). Modification and checking of the blocked state remains racy by design, the caller is responsible for dealing with this. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rework controller state notifierJan Kiszka
Another step towards proper locking: Rework the callback provided to capidrv for controller state changes. This is so far attached to an application, which would require us to hold the corresponding lock across notification calls. But there is no direct relation between a controller up/down event and an application, so let's decouple them and provide a notifier call chain for those events instead. This notifier chain is first of all used internally. Here we request the highest priority to unsure that housekeeping work is done before any other notifications. The chain is exported via [un]register_capictr_notifier to our only user, capidrv, to replace the racy and unfixable capi20_set_callback. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Rework capi_ctr_ready/downJan Kiszka
This step prepares the application of proper controller locking: Push all state changing work into the notify handler that are called by capi_ctr_ready and capi_ctr_down, switch detach_capi_ctr to issue a synchronous ctr_down. Also ensure that we do not go through any action if the state did not change. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Convert capi drivers rwlock into mutexJan Kiszka
Turn the lock protecting registered capi drivers into a mutex and apply it consistently. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Call a controller 'controller', not 'card'Jan Kiszka
At least for our internal use, fix the misnomers that refer to a CAPI controller as 'card'. No functional changes. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Reduce chattiness during module loading/removalJan Kiszka
The CVS revisions dumped by all CAPI modules are meaningless today. And that some CAPI module is loaded or removed does not necessarily deserve a message. Just keep the message of the central module, capi.ko, drop the rest. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Pin capifs instead of mounting itJan Kiszka
Auto-mounting the capifs during module init prevents unloading its module. Instead, pin the filesystem as long as some NCCI node exists. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Eliminate capifs_root variableJan Kiszka
capifs_mnt->mnt_sb->s_root already contains what we need. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Sanitize capifs APIJan Kiszka
Instead of looking up the dentry of an NCCI node again in capifs_free_ncci pass the pointer via the capifs user. This patch also reduces the #ifdef mess in capi.c a bit as far as capifs was causing it. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16CAPI: Fix leaks in capifs_new_ncciJan Kiszka
When something went wrong during capifs_new_ncci, the looked up dentry was not properly released. Neither was the allocated inode. Refactor the function to avoid leaks. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16net neigh: Decouple per interface neighbour table controls from binary sysctlsEric W. Biederman
Stop computing the number of neighbour table settings we have by counting the number of binary sysctls. This behaviour was silly and meant that we could not add another neighbour table setting without also adding another binary sysctl. Don't pass the binary sysctl path for neighour table entries into neigh_sysctl_register. These parameters are no longer used and so are just dead code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16net ipv4: Decouple ipv4 interface parameters from binary sysctl numbersEric W. Biederman
Stop using the binary sysctl enumeartion in sysctl.h as an index into a per interface array. This leads to unnecessary binary sysctl number allocation, and a fragility in data structure and implementation because of unnecessary coupling. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/pcnet32.c: Checkpatch cleaningJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/pcnet32.c: Use (pr|netdev|netif)_<levels> macro helpersJoe Perches
Make the output logging messages a bit more consistent. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/tehuti.c: trivial checkpatch cleanupsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/tehuti.c: Hoist assigns out of ifsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/tehuti.c: Use (pr|netdev|netif)_<levels> macro helpersJoe Perches
Make the output logging messages a bit more consistent. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/sky2: Convert to use netif_printk macrosJoe Perches
Some unlikely(netif_msg_<foo>(sky2)) tests are also removed by this change. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16drivers/net/ixgb: Use netif_printk macrosJoe Perches
Convert private DPRINTK macro uses to netif_<level> equivalents Remove #define DPRINTK Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16sparc64: Kill bogus ip_tables.h include.David S. Miller
Fixes the following build failure: CC arch/sparc/kernel/sys_sparc32.o In file included from include/linux/netfilter_ipv4/ip_tables.h:28, from arch/sparc/kernel/sys_sparc32.c:46: include/linux/netfilter/x_tables.h:525: error: expected declaration specifiers or ‘...’ before ‘nf_hookfn’ Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16bnx2: Update firmwares and update version to 2.0.8.Michael Chan
- Increase FTQ depth to 256 to ehnabce performance. - Fix RV2P context corruption on 5709 when flow control is enabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16bnx2: Fix bug when saving statistics.Patrick Rabau
This fixes the problem of dropping the carry when adding 2 32-bit values. Switch to use array indexing for better readability. Reported by and fix provided by Patrick Rabau. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16bnx2: Allow user-specified multiple advertisement speed values.Michael Chan
Remove unnecessary code that works around older versions of ethtool that can pass down invalid advertisement speed values. This old code prevents the user from specifying multiple advertisement values. The new code uses simple masking to mask out invalid advertisment bits. Reported-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16bnx2: Adjust flow control water marks.Michael Chan
The current water marks are too high and can cause unnecessary flow control frames. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16bnx2: Need to call cnic_setup_cnic_irq_info() after MTU change.Michael Chan
New status blocks are allocated during MTU change so we need to update this information for the cnic driver. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16bnx2: Check BNX2_FLAG_USING_MSIX flag when setting up MSIX.Michael Chan
Checking the flag is more correct than checking bp->irq_nvecs. By accident it is not a problem because we always have more than 1 vectors when using MSIX mode. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16atl1c: Add support for Atheros AR8152 and AR8152Luis R. Rodriguez
AR8151 is a Gigabit Ethernet device. AR8152 devices are Fast Ethernet devices, there are two revisions, a 1.0 and a 2.0 revision. This has been tested against these devices: Driver Model-name vendor:device Type atl1c AR8131 1969:1063 Gigabit Ethernet atl1c AR8132 1969:1062 Fast Ethernet atl1c AR8151(v1.0) 1969:1073 Gigabit Ethernet atl1c AR8152(v1.1) 1969:2060 Fast Ethernet This device has no hardware available yet so it goes untested, but it should work: atl1c AR8152(v2.0) 1969:2062 Fast Ethernet Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16tunnels: fix netns vs proto registration orderingAlexey Dobriyan
Same stuff as in ip_gre patch: receive hook can be called before netns setup is done, oopsing in net_generic(). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16gre: fix netns vs proto registration orderingAlexey Dobriyan
GRE protocol receive hook can be called right after protocol addition is done. If netns stuff is not yet initialized, we're going to oops in net_generic(). This is remotely oopsable if ip_gre is compiled as module and packet comes at unfortunate moment of module loading. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-02-15ethtool: reduce stack usageEric Dumazet
dev_ethtool() is currently using 604 bytes of stack, even with gcc-4.4.2 objdump -d vmlinux | scripts/checkstack.pl ... 0xc04bbc33 dev_ethtool [vmlinux]: 604 ... Adding noinline attributes to selected functions can reduce stack usage. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15net: emaclite: adding MDIO and phy lib supportJohn Linn
These changes add MDIO and phy lib support to the driver as the IP core now supports the MDIO bus. The MDIO bus and phy are added as a child to the emaclite in the device tree as illustrated below. mdio { #address-cells = <1>; #size-cells = <0>; phy0: phy@7 { compatible = "marvell,88e1111"; reg = <7>; } ; } Signed-off-by: Sadanand Mutyala <Sadanand.Mutyala@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15X25: Dont let x25_bind use addresses containing charactersandrew hendry
Addresses should be all digits. Stops x25_bind using addresses containing characters. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15X25: Fix x25_create errors for bad protocol and ENOBUFSandrew hendry
alloc_socket failures should return -ENOBUFS a bad protocol should return -EINVAL Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-12 12:35:46 +0000