summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-02-15sfc: Add TX queues for high-priority trafficBen Hutchings
Implement the ndo_setup_tc() operation with 2 traffic classes. Current Solarstorm controllers do not implement TX queue priority, but they do allow queues to be 'paced' with an enforced delay between packets. Paced and unpaced queues are scheduled in round-robin within two separate hardware bins (paced queues with a large delay may be placed into a third bin temporarily, but we won't use that). If there are queues in both bins, the TX scheduler will alternate between them. If we make high-priority queues unpaced and best-effort queues paced, and high-priority queues are mostly empty, a single high-priority queue can then instantly take 50% of the packet rate regardless of how many of the best-effort queues have descriptors outstanding. We do not actually want an enforced delay between packets on best- effort queues, so we set the pace value to a reserved value that actually results in a delay of 0. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-15sfc: Distinguish queue lookup from test for queue existenceBen Hutchings
efx_channel_get_{rx,tx}_queue() currently return NULL if the channel isn't used for traffic in that direction. In most cases this is a bug, but some callers rely on it as an existence test. Add existence test functions efx_channel_has_{rx_queue,tx_queues}() and use them as appropriate. Change efx_channel_get_{rx,tx}_queue() to assert that the requested queue exists. Remove now-redundant initialisation from efx_set_channels(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-15sfc: Move TX queue core queue mapping into tx.cBen Hutchings
efx_hard_start_xmit() needs to implement a mapping which is the inverse of tx_queue::core_txq. Move the initialisation of tx_queue::core_txq next to efx_hard_start_xmit() to make the connection more obvious. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-15net: Adjust TX queue kobjects if number of queues changes during unregisterBen Hutchings
If the root qdisc for a net device is mqprio, and the driver's ndo_setup_tc() operation dynamically adds and remvoes TX queues, netif_set_real_num_tx_queues() will be called during device unregistration to remove the extra TX queues when the qdisc is destroyed. Currently this causes the corresponding kobjects to be leaked, and the device's reference count never drops to 0. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-14sch_mqprio: Always set num_tc to 0 in mqprio_destroy()Ben Hutchings
All the cleanup code in mqprio_destroy() is currently conditional on priv->qdiscs being non-null, but that condition should only apply to the per-queue qdisc cleanup. We should always set the number of traffic classes back to 0 here. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e1000e/netdev.c
2011-02-08pch_can: fix module reload issue with MSITomoya
Currently, in case reload pch_can, pch_can not to be able to catch interrupt. The cause is bus-master is not set in pch_can. Thus, add enabling bus-master processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08pch_can: fix rmmod issueTomoya
Currently, when rmmod pch_can, kernel failure occurs. The cause is pci_iounmap executed before pch_can_reset. Thus pci_iounmap moves after pch_can_reset. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08pch_can: fix 800k comms issueTomoya
Currently, 800k comms fails since prop_seg set zero. (EG20T PCH CAN register of prop_seg must be set more than 1) To prevent prop_seg set to zero, change tseg2_min 1 to 2. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08net: Kill NETEVENT_PMTU_UPDATE.David S. Miller
Nobody actually does anything in response to the event, so just kill it off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08net: Remove bogus barrier() in dst_allfrag().David S. Miller
I simply missed this one when modifying the other dst metric interfaces earlier. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08net: Fix lockdep regression caused by initializing netdev queues too early.David S. Miller
In commit aa9421041128abb4d269ee1dc502ff65fb3b7d69 ("net: init ingress queue") we moved the allocation and lock initialization of the queues into alloc_netdev_mq() since register_netdevice() is way too late. The problem is that dev->type is not setup until the setup() callback is invoked by alloc_netdev_mq(), and the dev->type is what determines the lockdep class to use for the locks in the queues. Fix this by doing the queue allocation after the setup() callback runs. This is safe because the setup() callback is not allowed to make any state changes that need to be undone on error (memory allocations, etc.). It may, however, make state changes that are undone by free_netdev() (such as netif_napi_add(), which is done by the ipoib driver's setup routine). The previous code also leaked a reference to the &init_net namespace object on RX/TX queue allocation failures. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08net/caif: Fix dangling list pointer in freed object on error.David S. Miller
rtnl_link_ops->setup(), and the "setup" callback passed to alloc_netdev*(), cannot make state changes which need to be undone on failure. There is no cleanup mechanism available at this point. So we have to add the caif private instance to the global list once we are sure that register_netdev() has succedded in ->newlink(). Otherwise, if register_netdev() fails, the caller will invoke free_netdev() and we will have a reference to freed up memory on the chnl_net_list. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08ipsec: allow to align IPv4 AH on 32 bitsNicolas Dichtel
The Linux IPv4 AH stack aligns the AH header on a 64 bit boundary (like in IPv6). This is not RFC compliant (see RFC4302, Section 3.3.3.2.1), it should be aligned on 32 bits. For most of the authentication algorithms, the ICV size is 96 bits. The AH header alignment on 32 or 64 bits gives the same results. However for SHA-256-128 for instance, the wrong 64 bit alignment results in adding useless padding in IPv4 AH, which is forbidden by the RFC. To avoid breaking backward compatibility, we use a new flag (XFRM_STATE_ALIGN4) do change original behavior. Initial patch from Dang Hongwu <hongwu.dang@6wind.com> and Christophe Gouault <christophe.gouault@6wind.com>. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08USB CDC NCM errata updates for cdc_ncm host driverAlexey Orishko
Specification links: - CDC NCM errata link: http://www.usb.org/developers/devclass_docs/NCM10_012011.zip - CDC and WMC errata link: http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip Changes: - driver updated to match cdc.h header with errata changes - added support for USB_CDC_SET_NTB_INPUT_SIZE control request with 8 byte length - fixes to comply with specification: send only control requests supported by device, set number of datagrams for IN direction, connection speed structure update, etc. - packet loss fixed for tx direction; misleading flag renamed. - adjusted hard_mtu value. Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08CDC NCM errata updates for cdc.hAlexey Orishko
Changes are based on the following documents: - CDC NCM errata: http://www.usb.org/developers/devclass_docs/NCM10_012011.zip - CDC and WMC errata link: http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-02-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6
2011-02-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-08ixgbe: update version stringDon Skidmore
This will synchronize the version string with that of the latest source forge driver which shares its functionality. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: cleanup variable initializationDon Skidmore
The ixgbe_fcoe_ddp_get function wasn't initializing one of its variables and this was producing compiler warnings. This patch cleans that up. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: limit VF access to network trafficAlexander Duyck
This change fixes VM pool allocation issues based on MAC address filtering, as well as limits the scope of VF access to promiscuous mode. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: fix for 82599 erratum on Header SplittingDon Skidmore
We have found a hardware erratum on 82599 hardware that can lead to unpredictable behavior when Header Splitting mode is enabled. So we are no longer enabling this feature on affected hardware. Please see the 82599 Specification Update for more information. CC: stable@kernel.org Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: fix variable set but not used warnings by gcc 4.6Emil Tantilov
Caught with gcc 4.6 -Wunused-but-set-variable Remove unused napi_vectors variable. Fix the use of reset_bit in ixgbe_reset_hw_X540() Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08e1000: add support for Marvell Alaska M88E1118R PHYFlorian Fainelli
This patch adds support for Marvell Alask M88E188R PHY chips. Support for other M88* PHYs is already there, so there is nothing more to add than its PHY id. CC: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08e1000e: tx_timeout should not increment for non-hang eventsJesse Brandeburg
Currently the driver increments the tx_timeout counter (an error counter) when simply resetting the part with outstanding transmit work pending. This is an unnecessary count of an error, when all we should be doing is just resetting the part and discarding the transmits. With this change the only increment of tx_timeout is when the stack calls the watchdog reset function due to a true Tx timeout. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-07Merge branch 'batman-adv/merge' of git://git.open-mesh.org/ecsv/linux-mergeDavid S. Miller
2011-02-08batman-adv: Linearize fragment packets before mergeSven Eckelmann
We access the data inside the skbs of two fragments directly using memmove during the merge. The data of the skb could span over multiple skb pages. An direct access without knowledge about the pages would lead to an invalid memory access. Signed-off-by: Sven Eckelmann <sven@narfation.org> [lindner_marek@yahoo.de: Move return from function to the end] Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-02-07x25: possible skb leak on bad facilitiesandrew hendry
Originally x25_parse_facilities returned -1 for an error 0 meaning 0 length facilities >0 the length of the facilities parsed. 5ef41308f94dc ("x25: Prevent crashing when parsing bad X.25 facilities") introduced more error checking in x25_parse_facilities however used 0 to indicate bad parsing a6331d6f9a429 ("memory corruption in X.25 facilities parsing") followed this further for DTE facilities, again using 0 for bad parsing. The meaning of 0 got confused in the callers. If the facilities are messed up we can't determine where the data starts. So patch makes all parsing errors return -1 and ensures callers close and don't use the skb further. Reported-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07mac80211: remove unneeded checkDan Carpenter
"ap" is the address of sdata->u.ap so it can never be NULL here. Also we dereferenced it on the previous line. I removed the check. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07ath9k: Update comments for not parsing DTIM periodMohammed Shafi Shajakhan
Add few comments for not parsing DTIM period from mac80211 Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07mac80211: Update comments on radiotap MCS indexMohammed Shafi Shajakhan
mac80211 now supports passing MCS index to radiotap, so update the comments regarding this Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07mac80211: as a 4-addr station, do not receive packets for other stationsFelix Fietkau
Since 4-addr frames completely override the source address which will make it into the converted 802.3 frames, receiving frames for other 4-addr stations will confuse the bridging code. To be able to handle traffic for all connected devices, the bridge code will automatically turn on promiscuous mode, which triggers this problem. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Steve Brown <sbrown@cortland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07mac80211: Make some mlme timers module paramaters.Ben Greear
This allows users to tune the connection-loss algorithms to be more or less lenient. In particular, larger null-func retries helps when using lots of virtual stations on a loaded network. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07ath5k: Fix fast channel switchingNick Kossifidis
Fast channel change fixes: a) Always set OFDM timings b) Don't re-activate PHY c) Enable only NF calibration, not AGC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07mac80211: fix the skb cloned check in the tx pathFelix Fietkau
Using skb_header_cloned to check if it's safe to write to the skb is not enough - mac80211 also touches the tailroom of the skb. Initially this check was only used to increase a counter, however this commit changed the code to also skip skb data reallocation if no extra head/tailroom was needed: commit 4cd06a344db752f513437138953af191cbe9a691 mac80211: skip unnecessary pskb_expand_head calls It added a regression at least with iwl3945, which is fixed by this patch. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07iwlagn: Re-enable RF_KILL interrupt when downDon Fry
With commit 554d1d027b19265c4aa3f718b3126d2b86e09a08 only one RF_KILL interrupt will be seen by the driver when the interface is down. Re-enable the interrupt when it occurs to see all transitions. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07ssb-pcmcia: Fix parsing of invariants tuplesMichael Büsch
This fixes parsing of the device invariants (MAC address) for PCMCIA SSB devices. ssb_pcmcia_do_get_invariants expects an iv pointer as data argument. Tested-by: dylan cristiani <d.cristiani@idem-tech.it> Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07enic: Update MAINTAINERSVasanthy Kolluri
Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Clean up: Remove support for an older version of hardwareVasanthy Kolluri
Remove support for an older version (A1) of hardware Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Bug Fix: Reorder firmware devcmds - CMD_INIT and CMD_IG_VLAN_REWRITE_MODEVasanthy Kolluri
Firmware requires CMD_IG_VLAN_REWRITE_MODE be issued before a CMD_INIT. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Bug Fix: Fix return values of enic_add/del_station_addr routinesVasanthy Kolluri
Fix enic_add/del_station_addr routines to return appropriate error code when an invalid address is added or deleted. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Clean up: Organize devcmd wrapper routinesVasanthy Kolluri
Organize the wrapper routines for firmware devcmds into a separate file. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Decouple mac address registration and deregistration from port profile ↵Roopa Prabhu
set operation This patch removes VM mac address registration and deregistration code during port profile set operation. We can delay mac address registration until enic_open. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06bnx2x: Proper netdev->ndo_set_rx_mode() implementation.Vladislav Zolotarov
Completed the bnx2x_set_rx_mode() to a proper netdev->ndo_set_rx_mode implementation: - Added a missing configuration of a unicast MAC addresses list. - Changed bp->dma_lock from being a mutex to a spinlock as long as it's taken under netdev->addr_list_lock now. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06bnx2x: Duplication in promisc modeVladislav Zolotarov
Prevent packets duplication for frames targeting FCoE L2 ring: packets were arriving to stack from both L2 RSS and from FCoE L2 in a promiscuous mode. Configure FCoE L2 ring to DROP_ALL rx mode, when interface is configured to PROMISC, and to accept only unicast frames, when interface is configured to ALL_MULTI. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06bnx2x: MTU for FCoE L2 ringVladislav Zolotarov
Always configure an FCoE L2 ring with a mini-jumbo MTU size (2500). To do that we had to move the rx_buf_size parameter from per function level to a per ring level. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06iwlwifi: fix compiling error with different configurationWey-Yi Guy
When .config has different configuration, it might fail to compile iwlwifi. fix it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-06iwlwifi: remove unnecessary lockingJohannes Berg
This code, and the places that set the variable is_internal_short_scan and the vif pointers are all protected by the mutex, there's no point in locking the spinlock here as well (any more). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-05tcp: Add reference to initial CWND ietf draft.David S. Miller
Suggested by Alexander Zimmermann Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-13 20:27:19 +0000