summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-01-07ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT ↵Gregory CLEMENT
enable This patch fixes a bug for Aurora L2 cache controller when the write-through mode is enable. For the clean operation even if we don't have to flush the lines we still need to invalidate them. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-07Revert "drm/i915: no lvds quirk for Zotac ZDBOX SD ID12/ID13"Daniel Vetter
This reverts commit 9756fe38d10b2bf90c81dc4d2f17d5632e135364. The bogus lvds output is actually a lvds->hdmi bridge, which we don't really support. But unconditionally disabling it breaks some existing setups. Reported-by: John Tapsell <johnflux@gmail.com> References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/17237 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-07drm/i915; Only increment the user-pin-count after successfully pinning the boChris Wilson
As along the error path we do not correct the user pin-count for the failure, we may end up with userspace believing that it has a pinned object at offset 0 (when interrupted by a signal for example). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-07ALSA: au88x0: fix incorrect left shiftNickolai Zeldovich
vortex_wt_setdsout performs bit-negation on the bit position (wt&0x1f) rather than on the resulting bitmask. This code is never actually invoked (vortex_wt_setdsout is always called with en=1), so this does not currently cause any problem, and this patch is simply cleanup. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-07m68k: fix conditional use of init_pointer_tableGreg Ungerer
Compiling 3.8-rc1 fails for some m68k targets (the non-mmu ones) with: CC arch/m68k/mm/init.o arch/m68k/mm/init.c: In function ‘mem_init’: arch/m68k/mm/init.c:191:2: error: implicit declaration of function ‘init_pointer_table’ arch/m68k/mm/init.c:191:36: error: ‘kernel_pg_dir’ undeclared (first use in this function) arch/m68k/mm/init.c:191:36: note: each undeclared identifier is reported only once for each function it appears in arch/m68k/mm/init.c:192:18: error: ‘PTRS_PER_PGD’ undeclared (first use in this function) arch/m68k/mm/init.c:194:4: error: implicit declaration of function ‘__pgd_page’ arch/m68k/mm/init.c:198:6: error: ‘zero_pgtable’ undeclared (first use in this function) make[2]: *** [arch/m68k/mm/init.o] Error 1 make[1]: *** [arch/m68k/mm] Error 2 make[1]: Leaving directory `/home/gerg/new-wave.git/linux-3.x' make: *** [linux] Error 1 Change the conditions that define init_pointer_table so that it matches what actually uses it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-01-06ipv4: fix NULL checking in devinet_ioctl()Xi Wang
The NULL pointer check `!ifa' should come before its first use. [ Bug origin : commit fd23c3b31107e2fc483301ee923d8a1db14e53f4 (ipv4: Add hash table of interface addresses) in linux-2.6.39 ] Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-07drm/exynos: move finish page flip to a common placeRahul Sharma
This patch implements the exynos_drm_crtc_finish_pageflip in exynos_drm_crtc.c. This avoids the duplication of same code in mixer, fimd and vidi. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Stephane Marchesin <marcheu@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-06tcp: fix MSG_SENDPAGE_NOTLAST logicEric Dumazet
commit 35f9c09fe9c72e (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag : MSG_SENDPAGE_NOTLAST meant to be set on all frags but the last one for a splice() call. The condition used to set the flag in pipe_to_sendpage() relied on splice() user passing the exact number of bytes present in the pipe, or a smaller one. But some programs pass an arbitrary high value, and the test fails. The effect of this bug is a lack of tcp_push() at the end of a splice(pipe -> socket) call, and possibly very slow or erratic TCP sessions. We should both test sd->total_len and fact that another fragment is in the pipe (pipe->nrbufs > 1) Many thanks to Willy for providing very clear bug report, bisection and test programs. Reported-by: Willy Tarreau <w@1wt.eu> Bisected-by: Willy Tarreau <w@1wt.eu> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-07drm/exynos: fimd: modify condition in fimd resumePrathyush K
If fimd is runtime suspended (by DPMS OFF), fimd_suspend does not call fimd_activate(false) and just returns. Similarily the check in fimd_resume should not resume if previously runtime_suspended. Instead the existing check does the opposite. So if fimd was not runtime suspended, suspend will turn off fimd but resume will not turn it on. This patch fixes this issue by reversing the condition. Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-06ext4: remove duplicate call to ext4_bread() in ext4_init_new_dir()Guo Chao
This fixes a buffer cache leak when creating a directory, introduced in commit a774f9c20. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Tao Ma <boyu.mt@taobao.com>
2013-01-06ext4: release buffer in failed path in dx_probe()Guo Chao
If checksum fails, we should also release the buffer read from previous iteration. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>- Cc: stable@vger.kernel.org -- fs/ext4/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
2013-01-06ext4: fix configuration dependencies for ext4 ACLs and security labelsValerie Aurora
Commit "ext4: Remove CONFIG_EXT4_FS_XATTR" removed the configuration dependencies for ext4 xattrs from the ext4 ACLs and security labels configuration options, but did not replace them with a dependency on ext4 itself. Add back the dependency on ext4 so the options only show up if ext4 is enabled. Signed-off-by: Valerie Aurora <val@vaaconsulting.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Tao Ma <boyu.mt@taobao.com>
2013-01-07m68knommu: add KMAP definitions for non-MMU definitionsGreg Ungerer
To be consistent with the set of MMU definitions we should define KMAP_START and KMAP_END. Future common m68k code will use their values. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-01-07Merge branch 'for-Linus' of ↵James Morris
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus Pulled from Mimi's tree.
2013-01-06ARM: 7614/1: mm: fix wrong branch from Cortex-A9 to PJ4bHaojian Zhuang
If CONFIG_ARCH_MULTIPLATFORM & CONFIG_ARCH_MVEBU are both enabled, __v7_pj4b_setup is added between __v7_ca9mp_setup and __v7_setup. But there's no jump instruction added. If the chip is Cortex A5/A9, it goes through __v7_pj4b_setup also. It results in system hang. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-06ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORMFabio Estevam
Since commit 62e4d357a (ARM: 7609/1: disable errata work-arounds which access secure registers) ARM_ERRATA_743622/751472 depends on !ARCH_MULTIPLATFORM. Since imx has been converted to multiplatform, the following warning happens: $ make imx_v6_v7_defconfig warning: (SOC_IMX6Q && ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_751472 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) warning: (SOC_IMX6Q && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_743622 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) warning: (SOC_IMX6Q && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_743622 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) warning: (SOC_IMX6Q && ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_751472 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) Recommended approach is to remove ARM_ERRATA_743622/751472 from being selected by SOC_IMX6Q and apply such workarounds into the bootloader. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-06dma: mv_xor: fix error handling for clocksThomas Petazzoni
When a channel fails to initialize, we release all ressources, including clocks. However, a XOR unit is not necessarily associated to a clock (some variants of Marvell SoCs have a clock for XOR units, some don't), so we shouldn't unconditionally be releasing the clock. Instead, just like we do in the mv_xor_remove() function, we should check if one clock was found before releasing it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06dma: mv_xor: fix error handling of mv_xor_channel_add()Thomas Petazzoni
When mv_xor_channel_add() fails for one XOR channel, we jump to the err_channel_add label to clean up all previous channels that had been initialized correctly. Unfortunately, while handling this error condition, we were disposing the IRQ mapping before calling mv_xor_channel_remove() (which does the free_irq()), which is incorrect. Instead, do things properly in the reverse order of the initialization: first remove the XOR channel (so that free_irq() is done), and then dispose the IRQ mapping. This avoids ugly warnings when for some reason one of the XOR channel fails to initialize. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Add missing ; for cpu node.Andrew Lunn
The Armada XP MV78230 DT include file is missing a ; at the end of the cpu node. Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Armada XP MV78230 has only three Ethernet interfacesThomas Petazzoni
We originally thought that the MV78230 variant of the Armada XP had four Ethernet interfaces, like the other variants MV78260 and MV78460. In fact, this is not true, and the MV78230 has only three Ethernet interfaces. So, the definitions of the Ethernet interfaces is now done as follows: * armada-370-xp.dtsi: definitions of the first two interfaces, that are common to Armada 370 and Armada XP * armada-xp.dtsi: definition of the third interface, common to all Armada XP variants. * armada-xp-mv78260.dtsi and armada-xp-mv78460.dtsi: definition of the fourth interface. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Armada XP MV78230 has two cores, not oneThomas Petazzoni
Contrary to our understanding at the time armada-xp-mv78230.dtsi was written, the MV78230 variant of the Armada XP SoC has two cores and not one. This patch updates the .dtsi file to take into account this reality. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06clk: mvebu: Remove inappropriate __init taggingJoshua Coombs
If the Orion WDT driver is built as a module, an opps occurs during clk lookup when calling mvebu_clk_gating_get_src(). Remove the inappropriate __init tag so the function is available for modules after kernel init. Signed-off-by: Joshua Coombs <josh.coombs@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Use fixed-regulator instead of board gpio callAndrew Lunn
With the change to a DT based pinctrl/gpio driver, using gpio API calls in board-*.c files no longer works, a dereferenced NULL pointer exception occurs instead. By converting the GPIO code into a fixed-regulator which gets probed later once pinctrl/gpio is available, we avoid the exception. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mplch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Fix missing sdio clockAndrew Lunn
We moved to declaring clk gates in DT. However, device which do not yet have a DT binding need to have a clkdev alias. This was missing for SDIO. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mplch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providersNobuhiro Iwamatsu
Clock Management of kirkwood has moved to DT clock providers. However, TWSI1 has not yet been done. This switches TWSI1 of 88f6282 to DT clock providers. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06Power: gpio-poweroff: Fix documentation and gpio_is_validAndrew Lunn
Improve the documentation to clarify level vs edge triggered power off. Improve the comments for level vs edge triggered power off. Make use of gpio_is_valid(). Reported-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Fix missing clk for USB device.Andrew Lunn
Without the clock being held by a driver, it gets turned off at a bad time causing the SoC to lockup. This is often during reboot. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driverGregory CLEMENT
The UART controller used in the Armada 370 and Armada XP SoCs is the Synopsys DesignWare 8250 (aka Synopsys DesignWare ABP UART). The improper use of the ns16550 can lead to a kernel oops during boot if a character is sent to the UART before the initialization of the driver. The DW APB has an extra interrupt that gets raised when writing to the LCR when busy. This explains why we need to use dw-apb-uart driver to handle this. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ioat: Fix DMA memory sync direction correct flagShuah Khan
ioat does DMA memory sync with DMA_TO_DEVICE direction on a buffer allocated for DMA_FROM_DEVICE dma, resulting in the following warning from dma debug. Fixed the dma_sync_single_for_device() call to use the correct direction. [ 226.288947] WARNING: at lib/dma-debug.c:990 check_sync+0x132/0x550() [ 226.288948] Hardware name: ProLiant DL380p Gen8 [ 226.288951] ioatdma 0000:00:04.0: DMA-API: device driver syncs DMA memory with different direction [device address=0x00000000ffff7000] [size=4096 bytes] [mapped with DMA_FROM_DEVICE] [synced with DMA_TO_DEVICE] [ 226.288953] Modules linked in: iTCO_wdt(+) sb_edac(+) ioatdma(+) microcode serio_raw pcspkr edac_core hpwdt(+) iTCO_vendor_support hpilo(+) dca acpi_power_meter ata_generic pata_acpi sd_mod crc_t10dif ata_piix libata hpsa tg3 netxen_nic(+) sunrpc dm_mirror dm_region_hash dm_log dm_mod [ 226.288967] Pid: 1055, comm: work_for_cpu Tainted: G W 3.3.0-0.20.el7.x86_64 #1 [ 226.288968] Call Trace: [ 226.288974] [<ffffffff810644cf>] warn_slowpath_common+0x7f/0xc0 [ 226.288977] [<ffffffff810645c6>] warn_slowpath_fmt+0x46/0x50 [ 226.288980] [<ffffffff81345502>] check_sync+0x132/0x550 [ 226.288983] [<ffffffff81345c9f>] debug_dma_sync_single_for_device+0x3f/0x50 [ 226.288988] [<ffffffff81661002>] ? wait_for_common+0x72/0x180 [ 226.288995] [<ffffffffa019590f>] ioat_xor_val_self_test+0x3e5/0x832 [ioatdma] [ 226.288999] [<ffffffff811a5739>] ? kfree+0x259/0x270 [ 226.289004] [<ffffffffa0195d77>] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289008] [<ffffffffa01952c3>] ioat_probe+0x2f8/0x348 [ioatdma] [ 226.289011] [<ffffffffa0195f51>] ioat3_dma_probe+0x1d5/0x2aa [ioatdma] [ 226.289016] [<ffffffffa0194d12>] ioat_pci_probe+0x139/0x17c [ioatdma] [ 226.289020] [<ffffffff81354b8c>] local_pci_probe+0x5c/0xd0 [ 226.289023] [<ffffffff81083e50>] ? destroy_work_on_stack+0x20/0x20 [ 226.289025] [<ffffffff81083e68>] do_work_for_cpu+0x18/0x30 [ 226.289029] [<ffffffff8108d997>] kthread+0xb7/0xc0 [ 226.289033] [<ffffffff8166cef4>] kernel_thread_helper+0x4/0x10 [ 226.289036] [<ffffffff81662d20>] ? _raw_spin_unlock_irq+0x30/0x50 [ 226.289038] [<ffffffff81663234>] ? retint_restore_args+0x13/0x13 [ 226.289041] [<ffffffff8108d8e0>] ? kthread_worker_fn+0x1a0/0x1a0 [ 226.289044] [<ffffffff8166cef0>] ? gs_change+0x13/0x13 [ 226.289045] ---[ end trace e1618afc7a606089 ]--- [ 226.289047] Mapped at: [ 226.289048] [<ffffffff81345307>] debug_dma_map_page+0x87/0x150 [ 226.289050] [<ffffffffa019653c>] dma_map_page.constprop.18+0x70/0xb34 [ioatdma] [ 226.289054] [<ffffffffa0195702>] ioat_xor_val_self_test+0x1d8/0x832 [ioatdma] [ 226.289058] [<ffffffffa0195d77>] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289061] [<ffffffffa01952c3>] ioat_probe+0x2f8/0x348 [ioatdma] Signed-off-by: Shuah Khan <shuah.khan@hp.com> CC: <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-06[media] omap3isp: Don't include <plat/cpu.h>Laurent Pinchart
The plat/*.h headers are not available to drivers in multiplatform kernels. As the header isn't needed, just remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06Merge commit 'origin/master' into kvm-ppc-3.8Alexander Graf
2013-01-06KVM: PPC: Book3S HV: Fix compilation without CONFIG_PPC_POWERNVAndreas Schwab
Fixes this build breakage: arch/powerpc/kvm/book3s_hv_ras.c: In function ‘kvmppc_realmode_mc_power7’: arch/powerpc/kvm/book3s_hv_ras.c:126:23: error: ‘struct paca_struct’ has no member named ‘opal_mc_evt’ Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-06[media] s5p-mfc: Fix interrupt error handling routineKamil Debski
New context states were added but handling in s5p_mfc_handle_error for these states was not. After this patch these states are be handled correctly. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] s5p-fimc: Fix return value of __fimc_md_create_flite_source_links()Sylwester Nawrocki
Make sure 'ret' is not used uninitialized. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] m5mols: Fix typo in get_fmt callbackSylwester Nawrocki
The check of return value from __find_format() was inverted by mistake. This patch fixes regression introduced in commit 5565a2ad47 [media] m5mols: Protect driver data with a mutex Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] v4l: vb2: Set data_offset to 0 for single-plane output buffersLaurent Pinchart
Single-planar V4L2 buffers are converted to multi-planar vb2 buffers with a single plane when queued. The plane data_offset field is not available in the single-planar API and must be set to 0 for all output buffers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06Input: lm8323 - fix checking PWM interrupt statusNickolai Zeldovich
INT_PWM1 is already a bitmask, not the bit number, so shifting by INT_PWM1 is incorrect. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-05signals: set_current_blocked() can use __set_current_blocked()Oleg Nesterov
Cleanup. And I think we need more cleanups, in particular __set_current_blocked() and sigprocmask() should die. Nobody should ever block SIGKILL or SIGSTOP. - Change set_current_blocked() to use __set_current_blocked() - Change sys_sigprocmask() to use set_current_blocked(), this way it should not worry about SIGKILL/SIGSTOP. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-05signals: sys_ssetmask() uses uninitialized newmaskOleg Nesterov
Commit 77097ae503b1 ("most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set") removed the initialization of newmask by accident, causing ltp to complain like this: ssetmask01 1 TFAIL : sgetmask() failed: TEST_ERRNO=???(0): Success Restore the proper initialization. Reported-and-tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: stable@kernel.org # v3.5+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-06Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM: Move disabling/enabling runtime PM to late suspend/early resume
2013-01-06PM: Move disabling/enabling runtime PM to late suspend/early resumeRafael J. Wysocki
Currently, the PM core disables runtime PM for all devices right after executing subsystem/driver .suspend() callbacks for them and re-enables it right before executing subsystem/driver .resume() callbacks for them. This may lead to problems when there are two devices such that the .suspend() callback executed for one of them depends on runtime PM working for the other. In that case, if runtime PM has already been disabled for the second device, the first one's .suspend() won't work correctly (and analogously for resume). To make those issues go away, make the PM core disable runtime PM for devices right before executing subsystem/driver .suspend_late() callbacks for them and enable runtime PM for them right after executing subsystem/driver .resume_early() callbacks for them. This way the potential conflitcs between .suspend_late()/.resume_early() and their runtime PM counterparts are still prevented from happening, but the subtle ordering issues related to disabling/enabling runtime PM for devices during system suspend/resume are much easier to avoid. Reported-and-tested-by: Jan-Matthias Braun <jan_braun@gmx.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: 3.4+ <stable@vger.kernel.org>
2013-01-06Merge branch 'pm-qos'Rafael J. Wysocki
* pm-qos: PM / QoS: Rename local variable in dev_pm_qos_add_ancestor_request()
2013-01-06PM / QoS: Rename local variable in dev_pm_qos_add_ancestor_request()Rafael J. Wysocki
Local variable 'error' in dev_pm_qos_add_ancestor_request() need not contain error codes only, so rename it to 'ret'. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-05nfs: avoid dereferencing null pointer in initiate_bulk_drainingNickolai Zeldovich
Fix an inverted null pointer check in initiate_bulk_draining(). Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org [>= 3.7]
2013-01-05ARM: EXYNOS: skip the clock initialization for exynos5440Kukjin Kim
Since exynos5440 can support only common clk stuff, so this patch skips legacy exynos5 clock initialization. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-04printk: fix incorrect length from print_time() when seconds > 99999Roland Dreier
print_prefix() passes a NULL buf to print_time() to get the length of the time prefix; when printk times are enabled, the current code just returns the constant 15, which matches the format "[%5lu.%06lu] " used to print the time value. However, this is obviously incorrect when the whole seconds part of the time gets beyond 5 digits (100000 seconds is a bit more than a day of uptime). The simple fix is to use snprintf(NULL, 0, ...) to calculate the actual length of the time prefix. This could be micro-optimized but it seems better to have simpler, more readable code here. The bug leads to the syslog system call miscomputing which messages fit into the userspace buffer. If there are enough messages to fill log_buf_len and some have a timestamp >= 100000, dmesg may fail with: # dmesg klogctl: Bad address When this happens, strace shows that the failure is indeed EFAULT due to the kernel mistakenly accessing past the end of dmesg's buffer, since dmesg asks the kernel how big a buffer it needs, allocates a bit more, and then gets an error when it asks the kernel to fill it: syslog(0xa, 0, 0) = 1048576 mmap(NULL, 1052672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa4d25d2000 syslog(0x3, 0x7fa4d25d2010, 0x100008) = -1 EFAULT (Bad address) As far as I can see, the bug has been there as long as print_time(), which comes from commit 084681d14e42 ("printk: flush continuation lines immediately to console") in 3.5-rc5. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Cc: Sylvain Munaut <s.munaut@whatever-company.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-04drivers/rtc/rtc-vt8500.c: fix handling of data passed in struct rtc_timeTony Prisk
tm_mon is 0..11, whereas vt8500 expects 1..12 for the month field, causing invalid date errors for January, and causing the day field to roll over incorrectly. The century flag is only handled in vt8500_rtc_read_time, but not set in vt8500_rtc_set_time. This patch corrects the behaviour of the century flag. Signed-off-by: Edgar Toernig <froese@gmx.de> Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-04drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfieldTony Prisk
Control register bitfield for 12H/24H mode is handled incorrectly. Setting CR_24H actually enables 12H mode. This patch renames the define and changes the initialization code to correctly set 24H mode. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Cc: Edgar Toernig <froese@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-04rtc: add RTC driver for TPS6586xLaxman Dewangan
Add an RTC driver for TPS6586X chips by TI. This driver supports: - Setting and getting time and date. - Setting and reading alarm time. - Alarm and interrupt functionlity. [akpm@linux-foundation.org: remove stray semicolons] [akpm@linux-foundation.org: start epoch in 2009] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-04MAINTAINERS: fix drivers/staging/sm7xx/Cesar Eduardo Barros
This directory was moved to drivers/staging/sm7xxfb/ by commit 925aa6600cee ("staging: sm7xxfb: sm7xx becomes sm7xxfb"). Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Cc: Teddy Wang <teddy.wang@siliconmotion.com.cn> Acked-by: Javier Muñoz <jmunhoz@igalia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-18 08:44:50 +0000