summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-10-12Bluetooth: clean up rfcomm codeAndrei Emeltchenko
Remove dead code and unused rfcomm thread events Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Update conf_state before send config_req outHaijun Liu
Update conf_state with L2CAP_CONF_REQ_SENT before send config_req out in l2cap_config_req(). Signed-off-by: Haijun Liu <haijun.liu@atheros.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Use the proper error value from bt_skb_send_alloc()Gustavo F. Padovan
&err points to the proper error set by bt_skb_send_alloc() when it fails. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: make batostr() print in the right orderGustavo F. Padovan
The Bluetooth core uses the the BD_ADDR in the opposite order from the human readable order. So we are changing batostr() to print in the correct order and then removing some baswap(), as they are not needed anymore. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: remove unused variable from cmtpGustavo F. Padovan
A value was attributed to 'src', but no one was using. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: check for l2cap header in start fragmentAndrei Emeltchenko
BLUETOOTH SPECIFICATION Version 4.0 [Vol 3] page 36 mentioned "Note: Start Fragments always begin with the Basic L2CAP header of a PDU." Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: check L2CAP length in first ACL fragmentAndrei Emeltchenko
Current Bluetooth code assembles fragments of big L2CAP packets in l2cap_recv_acldata and then checks allowed L2CAP size in assemled L2CAP packet (pi->imtu < skb->len). The patch moves allowed L2CAP size check to the early stage when we receive the first fragment of L2CAP packet. We do not need to reserve and keep L2CAP fragments for bad packets. Updated version after comments from Mat Martineau <mathewm@codeaurora.org> and Gustavo Padovan <padovan@profusion.mobi>. Trace below is received when using stress tools sending big fragmented L2CAP packets. ... [ 1712.798492] swapper: page allocation failure. order:4, mode:0x4020 [ 1712.804809] [<c0031870>] (unwind_backtrace+0x0/0xdc) from [<c00a1f70>] (__alloc_pages_nodemask+0x4) [ 1712.814666] [<c00a1f70>] (__alloc_pages_nodemask+0x47c/0x4d4) from [<c00a1fd8>] (__get_free_pages+) [ 1712.824645] [<c00a1fd8>] (__get_free_pages+0x10/0x3c) from [<c026eb5c>] (__alloc_skb+0x4c/0xfc) [ 1712.833465] [<c026eb5c>] (__alloc_skb+0x4c/0xfc) from [<bf28c738>] (l2cap_recv_acldata+0xf0/0x1f8 ) [ 1712.843322] [<bf28c738>] (l2cap_recv_acldata+0xf0/0x1f8 [l2cap]) from [<bf0094ac>] (hci_rx_task+0x) ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Add support Bluetooth controller of MacbookPro 7,1Nobuhiro Iwamatsu
Bluetooth controller of MacbookPro 7,1 does not work. Because Device Class of these controllers was set 255 (Vendor Sepecific Class). T: Bus=04 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=8213 Rev=01.86 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller S: SerialNumber=5C5948C81B99 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Add support Bluetooth controller of MacbookPro 6,2Nobuhiro Iwamatsu
Bluetooth controller of MacbookPro 6,2 does not work. Because Device Class of these controllers was set 255 (Vendor Sepecific Class). T: Bus=01 Lev=03 Prnt=03 Port=02 Cnt=03 Dev#= 8 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=8218 Rev=00.22 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Don't clear the blacklist when closing the HCI deviceJohan Hedberg
Clearing the blacklist in hci_dev_do_close() would mean that user space needs to do extra work to re-block devices after a DEVDOWN-DEVUP cycle. This patch removes the clearing of the blacklist in this case and thereby saves user space from the extra work. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Acked-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: remove extra newline from debug outputAndrei Emeltchenko
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Use a stream-oriented recvmsg with SOCK_STREAM L2CAP sockets.Mat Martineau
L2CAP ERTM sockets can be opened with the SOCK_STREAM socket type, which is a mandatory request for ERTM mode. However, these sockets still have SOCK_SEQPACKET read semantics when bt_sock_recvmsg() is used to pull data from the receive queue. If the application is only reading part of a frame, then the unread portion of the frame is discarded. If the application requests more bytes than are in the current frame, only the current frame's data is returned. This patch utilizes common code derived from RFCOMM's recvmsg() function to make L2CAP SOCK_STREAM reads behave like RFCOMM reads (and other SOCK_STREAM sockets in general). The application may read one byte at a time from the input stream and not lose any data, and may also read across L2CAP frame boundaries. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Use common SOCK_STREAM receive code in RFCOMMMat Martineau
To reduce code duplication, have rfcomm_sock_recvmsg() call bt_sock_stream_recvmsg(). The common bt_sock_stream_recvmsg() code is nearly identical, with the RFCOMM-specific functionality for deferred setup and connection unthrottling left in rfcomm_sock_recvmsg(). Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Add common code for stream-oriented recvmsg()Mat Martineau
This commit adds a bt_sock_stream_recvmsg() function for use by any Bluetooth code that uses SOCK_STREAM sockets. This code is copied from rfcomm_sock_recvmsg() with minimal modifications to remove RFCOMM-specific functionality and improve readability. L2CAP (with the SOCK_STREAM socket type) and RFCOMM have common needs when it comes to reading data. Proper stream read semantics require that applications can read from a stream one byte at a time and not lose any data. The RFCOMM code already operated on and pulled data from the underlying L2CAP socket, so very few changes were required to make the code more generic for use with non-RFCOMM data over L2CAP. Applications that need more awareness of L2CAP frame boundaries are still free to use SOCK_SEQPACKET sockets, and may verify that they connection did not fall back to basic mode by calling getsockopt(). Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Validate PSM values in calls to connect() and bind()Mat Martineau
Valid L2CAP PSMs are odd numbers, and the least significant bit of the most significant byte must be 0. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Fix RFCOMM RPN negotiationYuri Kululin
According to the ETSI 3GPP TS 07.10 the default bit rate value for RFCOMM is 9600 bit/s. Return this bit rate in case of RPN request and accept other sane bit rates proposed by the sender in RPM command. Signed-off-by: Yuri Kululin <ext-yuri.kululin@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Support SDIO devices that are AMP controllersDavid Vrabel
Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: HCI devices are either BR/EDR or AMP radiosDavid Vrabel
HCI transport drivers may not know what type of radio an AMP device has so only say whether they're BR/EDR or AMP devices. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12net: percpu net_device refcountEric Dumazet
We tried very hard to remove all possible dev_hold()/dev_put() pairs in network stack, using RCU conversions. There is still an unavoidable device refcount change for every dst we create/destroy, and this can slow down some workloads (routers or some app servers, mmap af_packet) We can switch to a percpu refcount implementation, now dynamic per_cpu infrastructure is mature. On a 64 cpus machine, this consumes 256 bytes per device. On x86, dev_hold(dev) code : before lock incl 0x280(%ebx) after: movl 0x260(%ebx),%eax incl fs:(%eax) Stress bench : (Sending 160.000.000 UDP frames, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_TRIE) Before: real 1m1.662s user 0m14.373s sys 12m55.960s After: real 0m51.179s user 0m15.329s sys 10m15.942s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-12bnx2x: Fixing a typo: added a missing RSS enablementDmitry Kravkov
Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-12Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/net-next-2.6David S. Miller
2010-10-12dccp: cosmetics - warning formatGerrit Renker
This omits the redundant "DCCP:" in warning messages, since DCCP_WARN() already echoes the function name, avoiding messages like kernel: [10988.766503] dccp_close: DCCP: ABORT -- 209 bytes unread Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-10-12dccp: schedule an Ack when receiving timestampsGerrit Renker
This schedules an Ack when receiving a timestamp, exploiting the existing inet_csk_schedule_ack() function, saving one case in the `dccp_ack_pending()' function. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-10-12dccp: generalise data-loss conditionIvo Calado
This patch generalises the task of determining data loss from RFC 4340, 7.7.1. Let S_A, S_B be sequence numbers such that S_B is "after" S_A, and let N_B be the NDP count of packet S_B. Then, using modulo-2^48 arithmetic, D = S_B - S_A - 1 is an upper bound of the number of lost data packets, D - N_B is an approximation of the number of lost data packets (there are cases where this is not exact). The patch implements this as dccp_loss_count(S_A, S_B, N_B) := max(S_B - S_A - 1 - N_B, 0) Signed-off-by: Ivo Calado <ivocalado@embedded.ufcg.edu.br> Signed-off-by: Erivaldo Xavier <desadoc@gmail.com> Signed-off-by: Leandro Sales <leandroal@gmail.com> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-10-12dccp: remove unused argument in CCID tx functionGerrit Renker
This removes the argument `more' from ccid_hc_tx_packet_sent, since it was nowhere used in the entire code. (Btw, this argument was not even used in the original KAME code where the function initially came from; compare the variable moreToSend in the freebsd61-dccp-kame-28.08.2006.patch kept by Emmanuel Lochin.) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-10-12dccp: merge now-reduced connect_init() functionGerrit Renker
After moving the assignment of GAR/ISS from dccp_connect_init() to dccp_transmit_skb(), the former function becomes very small, so that a merger with dccp_connect() suggests itself. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-10-12dccp: fix the adjustments to AWL and SWLGerrit Renker
This fixes a problem and a potential loophole with regard to seqno/ackno validity: currently the initial adjustments to AWL/SWL are only performed once at the begin of the connection, during the handshake. Since the Sequence Window feature is always greater than Wmin=32 (7.5.2), it is however necessary to perform these adjustments at least for the first W/W' (variables as per 7.5.1) packets in the lifetime of a connection. This requirement is complicated by the fact that W/W' can change at any time during the lifetime of a connection. Therefore it is better to perform that safety check each time SWL/AWL are updated, as implemented by the patch. A second problem solved by this patch is that the remote/local Sequence Window feature values (which set the bounds for AWL/SWL/SWH) are undefined until the feature negotiation has completed. During the initial handshake we have more stringent sequence number protection; the changes added by this patch effect that {A,S}W{L,H} are within the correct bounds at the instant that feature negotiation completes (since the SeqWin feature activation handlers call dccp_update_gsr/gss()). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-10-11bnx2: Enable AER on PCIE devices onlyMichael Chan
To prevent unnecessary error message. pci_save_state() is also moved to the end of ->probe() so that all PCI config, including AER state, will be saved. Update version to 2.0.18. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11bnx2: Update firmware to 6.0.x.Michael Chan
- Improved flow control and simplified interface - Use hardware RSS indirection table instead of the slower firmware- based table - Lower latency interrupt on 5709 Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11neigh: reorder struct neighbour fieldsEric Dumazet
Le mardi 12 octobre 2010 à 00:02 +0200, Eric Dumazet a écrit : > Here is the followup patch. > > Thanks ! > Oops, this was an old version, the up2date ones also took care of "used" field. I guess its time for a sleep, sorry again. [PATCH net-next V2] neigh: reorder struct neighbour fields (refcnt) and (ha_lock, ha, used, dev, output, ops, primary_key) should be placed on a separate cache lines. refcnt can be often written, while other fields are mostly read. This gave me good result on stress test : before: real 0m45.570s user 0m15.525s sys 9m56.669s After: real 0m41.841s user 0m15.261s sys 8m45.949s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11net dst: use a percpu_counter to track entriesEric Dumazet
struct dst_ops tracks number of allocated dst in an atomic_t field, subject to high cache line contention in stress workload. Switch to a percpu_counter, to reduce number of time we need to dirty a central location. Place it on a separate cache line to avoid dirtying read only fields. Stress test : (Sending 160.000.000 UDP frames, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_TRIE, SLUB/NUMA) Before: real 0m51.179s user 0m15.329s sys 10m15.942s After: real 0m45.570s user 0m15.525s sys 9m56.669s With a small reordering of struct neighbour fields, subject of a following patch, (to separate refcnt from other read mostly fields) real 0m41.841s user 0m15.261s sys 8m45.949s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11neigh: Protect neigh->ha[] with a seqlockEric Dumazet
Add a seqlock in struct neighbour to protect neigh->ha[], and avoid dirtying neighbour in stress situation (many different flows / dsts) Dirtying takes place because of read_lock(&n->lock) and n->used writes. Switching to a seqlock, and writing n->used only on jiffies changes permits less dirtying. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/core/ethtool.c
2010-10-11net: clear heap allocations for privileged ethtool actionsKees Cook
Several other ethtool functions leave heap uncleared (potentially) by drivers. Some interfaces appear safe (eeprom, etc), in that the sizes are well controlled. In some situations (e.g. unchecked error conditions), the heap will remain unchanged in areas before copying back to userspace. Note that these are less of an issue since these all require CAP_NET_ADMIN. Cc: stable@kernel.org Signed-off-by: Kees Cook <kees.cook@canonical.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11NET: pch, fix use after freeJiri Slaby
Stanse found that pch_gbe_xmit_frame uses skb after it is freed. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Masayuki Ohtake <masa-korg@dsn.okisemi.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11NET: wimax, fix use after freeJiri Slaby
Stanse found that i2400m_rx frees skb, but still uses skb->len even though it has skb_len defined. So use skb_len properly in the code. And also define it unsinged int rather than size_t to solve compilation warnings. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: linux-wimax@intel.com Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11ATM: iphase, remove sleep-inside-atomicJiri Slaby
Stanse found that ia_init_one locks a spinlock and inside of that it calls ia_start which calls: * request_irq * tx_init which does kmalloc(GFP_KERNEL) Both of them can thus sleep and result in a deadlock. I don't see a reason to have a per-device spinlock there which is used only there and inited right before the lock location. So remove it completely. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11ATM: mpc, fix use after freeJiri Slaby
Stanse found that mpc_push frees skb and then it dereferences it. It is a typo, new_skb should be dereferenced there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11ATM: solos-pci, remove use after freeJiri Slaby
Stanse found we do in console_show: kfree_skb(skb); return skb->len; which is not good. Fix that by remembering the len and use it in the function instead. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11neigh: speedup neigh_hh_init()Eric Dumazet
When a new dst is used to send a frame, neigh_resolve_output() tries to associate an struct hh_cache to this dst, calling neigh_hh_init() with the neigh rwlock write locked. Most of the time, hh_cache is already known and linked into neighbour, so we find it and increment its refcount. This patch changes the logic so that we call neigh_hh_init() with neighbour lock read locked only, so that fast path can be run in parallel by concurrent cpus. This brings part of the speedup we got with commit c7d4426a98a5f (introduce DST_NOCACHE flag) for non cached dsts, even for cached ones, removing one of the contention point that routers hit on multiqueue enabled machines. Further improvements would need to use a seqlock instead of an rwlock to protect neigh->ha[], to not dirty neigh too often and remove two atomic ops. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-10net/fec: carrier off initially to avoid root mount failureOskar Schirmer
with hardware slow in negotiation, the system did freeze while trying to mount root on nfs at boot time. the link state has not been initialised so network stack tried to start transmission right away. this caused instant retries, as the driver solely stated business upon link down, rendering the system unusable. notify carrier off initially to prevent transmission until phylib will report link up. Signed-off-by: Oskar Schirmer <oskar@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11irda: Fix heap memory corruption in iriap.cSamuel Ortiz
While parsing the GetValuebyClass command frame, we could potentially write passed the skb->data pointer. Cc: stable@kernel.org Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
2010-10-11irda: Fix parameter extraction stack overflowSamuel Ortiz
Cc: stable@kernel.org Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
2010-10-11irda: Test index before read in stir421x_patch_device()Roel Kluin
Test whether index exceeds fw->size before reading the element Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
2010-10-11irda: Remove BKL instances from irnetSamuel Ortiz
The code intends to lock the irnet_socket, so adding a mutex to it allows for a complet BKL removal. Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
2010-10-11irda: Remove BKL instances from af_irda.cSamuel Ortiz
Most of the times, lock_kernel() was pointless or could simply be replaced by lock_sock(). Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
2010-10-09sundance: get_stats proper lockingEric Dumazet
sundance get_stats() should not be run concurrently, add a lock to avoid potential losses. Note: Remove unused rx_lock field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09net/tg3: simplify conditionalNicolas Kaiser
Simplify: ((a && !b) || (!a && b)) => (a != b) Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09ehea: simplify conditionalNicolas Kaiser
Simplify: ((a && b) || (!a && !b)) => (a == b) Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Acked-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09net_sched: use __TCA_HTB_MAX and TCA_HTB_MAXChangli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-01 00:30:22 +0000