summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-01-25percpu: align percpu readmostly subsection to cachelineTejun Heo
Currently percpu readmostly subsection may share cachelines with other percpu subsections which may result in unnecessary cacheline bounce and performance degradation. This patch adds @cacheline parameter to PERCPU() and PERCPU_VADDR() linker macros, makes each arch linker scripts specify its cacheline size and use it to align percpu subsections. This is based on Shaohua's x86 only patch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Shaohua Li <shaohua.li@intel.com>
2011-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: Make CIFS mount work in a container. CIFS: Remove pointless variable assignment in cifs_dfs_do_automount()
2011-01-25Merge branch 'for-38-rc3' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds
* 'for-38-rc3' of git://codeaurora.org/quic/kernel/davidb/linux-msm: drivers: mmc: msm: remove clock disable in probe mmc: msm: fix dma usage not to use internal APIs
2011-01-25Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add new radeon_info ioctl query for clock crystal freq drm/i915: Prevent uninitialised reads during error state capture drm/i915: Use consistent mappings for OpRegion between ACPI and i915 drm/i915: Handle the no-interrupts case for UMS by polling drm/i915: Disable high-precision vblank timestamping for UMS drm/i915: Increase the amount of defense before computing vblank timestamps drm/i915,agp/intel: Do not clear stolen entries drm/radeon/kms: simplify atom adjust pll setup drm/radeon/kms: match r6xx/r7xx/evergreen asic_reset with previous asics drm/radeon/kms: make the mac rv630 quirk generic drm/radeon/kms: fix a spelling error in an error message drm/radeon/kms: Initialize pageflip spinlocks. drm/i915: Recognise non-VGA display devices drm/i915: Fix use of invalid array size for ring->sync_seqno drm/i915/ringbuffer: Fix use of stale HEAD position whilst polling for space drm/i915: Don't kick-off hangcheck after a DRI interrupt drm/i915: Add dependency on CONFIG_TMPFS drm/i915: Initialise ring vfuncs for old DRI paths drm/i915: make the blitter report buffer modifications to the FBC unit drm/i915: set more FBC chicken bits
2011-01-25Merge branch 'drm-intel-fixes-2' of ↵Dave Airlie
ssh://master.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes * 'drm-intel-fixes-2' of ssh://master.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: (30 commits) drm/i915: Prevent uninitialised reads during error state capture drm/i915: Use consistent mappings for OpRegion between ACPI and i915 drm/i915: Handle the no-interrupts case for UMS by polling drm/i915: Disable high-precision vblank timestamping for UMS drm/i915: Increase the amount of defense before computing vblank timestamps drm/i915,agp/intel: Do not clear stolen entries Remove MAYBE_BUILD_BUG_ON BUILD_BUG_ON: make it handle more cases module: fix missing semicolons in MODULE macro usage param: add null statement to compiled-in module params module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n module: show version information for built-in modules in sysfs selinux: return -ENOMEM when memory allocation fails tpm: fix panic caused by "tpm: Autodetect itpm devices" TPM: Long default timeout fix trusted keys: Fix a memory leak in trusted_update(). keys: add trusted and encrypted maintainers encrypted-keys: rename encrypted_defined files to encrypted trusted-keys: rename trusted_defined files to trusted drm/i915: Recognise non-VGA display devices ...
2011-01-25drm/radeon/kms: add new radeon_info ioctl query for clock crystal freqAlex Deucher
Needed for timer queries in the 3D driver. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2011-01-25fix a shutdown regression in intel_idleShaohua Li
Fix a shutdown regression caused by 2a2d31c8dc6f ("intel_idle: open broadcast clock event"). The clockevent framework can automatically shutdown broadcast timers for hotremove CPUs. And we get a shutdown regression when we shutdown broadcast timer for hot remove CPU, so just delete some code. Also fix some section mismatch. Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-25Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: DMA: clear interrupt status correctly OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration arm: omap3: cm-t3517: minor comment fix arm: omap3: cm-t3517: rtc fix omap1: Fix sched_clock implementation when both MPU timer and 32K timer are used omap1: Fix booting for 15xx and 730 with omap1_defconfig omap1: Fix sched_clock for the MPU timer OMAP: PRCM: remove duplicated headers OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4 OMAP: counter_32k: init clocksource as part of machine timer init
2011-01-25Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix time function double declaration with glibc perf tools: Fix build by checking if extra warnings are supported perf tools: Fix build when using gcc 3.4.6 perf tools: Add missing header, fixes build perf tools: Fix 64 bit integer format strings perf test: Fix build on older glibcs perf: perf_event_exit_task_context: s/rcu_dereference/rcu_dereference_raw/ perf test: Use cpu_map->[cpu] when setting affinity perf symbols: Fix annotation of thumb code perf: Annotate cpuctx->ctx.mutex to avoid a lockdep splat powerpc, perf: Fix frequency calculation for overflowing counters (FSL version) perf: Fix perf_event_init_task()/perf_event_free_task() interaction perf: Fix find_get_context() vs perf_event_exit_task() race
2011-01-25Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: Remove Kconfig symbol for UIE emulation RTC: Properly handle rtc_read_alarm error propagation and fix bug RTC: Propagate error handling via rtc_timer_enqueue properly acpi_pm: Clear pmtmr_ioport if acpi_pm initialization fails rtc: Cleanup removed UIE emulation declaration hrtimers: Notify hrtimer users of switches to NOHZ mode
2011-01-25Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix poor interactivity on UP systems due to group scheduler nice tune bug
2011-01-25Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix jump label with RO/NX module protection crash x86, hotplug: Fix powersavings with offlined cores on AMD x86, mcheck, therm_throt.c: Export symbol platform_thermal_notify to allow coretemp to handler intr x86: Use asm-generic/cacheflush.h x86: Update CPU cache attributes table descriptors
2011-01-24drm/i915: Prevent uninitialised reads during error state captureChris Wilson
error_bo and pinned_bo could be used uninitialised if there were no active buffers. Caught by kmemcheck. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24drm/i915: Use consistent mappings for OpRegion between ACPI and i915Michael Karcher
The opregion is a shared memory region between ACPI and the graphics driver. As the ACPI mapping has been changed to cachable in commit 6d5bbf00d251cc73223a71422d69e069dc2e0b8d, mapping the intel opregion non-cachable now fails. As no bus-master hardware is involved in the opregion, cachable map should do no harm. Tested on a Fujitsu Lifebook P8010. Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> [ickle: convert to acpi_os_ioremap for consistency] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24Merge remote branch 'linus/master' into drm-intel-fixesChris Wilson
Merge with Linus to resolve conflicting fixes for the reusing the stale HEAD value during intel_ring_wait(). Conflicts: drivers/gpu/drm/i915/intel_ringbuffer.c
2011-01-24drm/i915: Handle the no-interrupts case for UMS by pollingChris Wilson
If the driver calls into the kernel to wait for a breadcrumb to pass, but hasn't enabled interrupts, fallback to polling the breadcrumb value. Reported-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24drm/i915: Disable high-precision vblank timestamping for UMSChris Wilson
We only have sufficient information for accurate (sub-frame) timestamping when the modesetting is under our control. Reported-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24drm/i915: Increase the amount of defense before computing vblank timestampsChris Wilson
Reported-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24drm/i915,agp/intel: Do not clear stolen entriesChris Wilson
We can only utilize the stolen portion of the GTT if we are in sole charge of the hardware. This is only true if using GEM and KMS, otherwise VESA continues to access stolen memory. Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24sched: Fix poor interactivity on UP systems due to group scheduler nice tune bugYong Zhang
Michael Witten and Christian Kujau reported that the autogroup scheduling feature hurts interactivity on their UP systems. It turns out that this is an older bug in the group scheduling code, and the wider appeal provided by the autogroup feature exposed it more prominently. When on UP with FAIR_GROUP_SCHED enabled, tune shares only affect tg->shares, but is not reflected in tg->se->load. The reason is that update_cfs_shares() does nothing on UP. So introduce update_cfs_shares() for UP && FAIR_GROUP_SCHED. This issue was found when enable autogroup scheduling was enabled, but it is an older bug that also exists on cgroup.cpu on UP. Reported-and-Tested-by: Michael Witten <mfwitten@gmail.com> Reported-and-Tested-by: Christian Kujau <christian@nerdbynature.de> Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Acked-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20110124073352.GA24186@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-24Merge branch 'BUG_ON' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * 'BUG_ON' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: Remove MAYBE_BUILD_BUG_ON BUILD_BUG_ON: make it handle more cases
2011-01-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: fix missing semicolons in MODULE macro usage param: add null statement to compiled-in module params module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n module: show version information for built-in modules in sysfs
2011-01-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: selinux: return -ENOMEM when memory allocation fails tpm: fix panic caused by "tpm: Autodetect itpm devices" TPM: Long default timeout fix trusted keys: Fix a memory leak in trusted_update(). keys: add trusted and encrypted maintainers encrypted-keys: rename encrypted_defined files to encrypted trusted-keys: rename trusted_defined files to trusted
2011-01-24Make CIFS mount work in a container.Rob Landley
Teach cifs about network namespaces, so mounting uses adresses/routing visible from the container rather than from init context. A container is a chroot on steroids that changes more than just the root filesystem the new processes see. One thing containers can isolate is "network namespaces", meaning each container can have its own set of ethernet interfaces, each with its own own IP address and routing to the outside world. And if you open a socket in _userspace_ from processes within such a container, this works fine. But sockets opened from within the kernel still use a single global networking context in a lot of places, meaning the new socket's address and routing are correct for PID 1 on the host, but are _not_ what userspace processes in the container get to use. So when you mount a network filesystem from within in a container, the mount code in the CIFS driver uses the host's networking context and not the container's networking context, so it gets the wrong address, uses the wrong routing, and may even try to go out an interface that the container can't even access... Bad stuff. This patch copies the mount process's network context into the CIFS structure that stores the rest of the server information for that mount point, and changes the socket open code to use the saved network context instead of the global network context. I.E. "when you attempt to use these addresses, do so relative to THIS set of network interfaces and routing rules, not the old global context from back before we supported containers". The big long HOWTO sets up a test environment on the assumption you've never used ocntainers before. It basically says: 1) configure and build a new kernel that has container support 2) build a new root filesystem that includes the userspace container control package (LXC) 3) package/run them under KVM (so you don't have to mess up your host system in order to play with containers). 4) set up some containers under the KVM system 5) set up contradictory routing in the KVM system and the container so that the host and the container see different things for the same address 6) try to mount a CIFS share from both contexts so you can both force it to work and force it to fail. For a long drawn out test reproduction sequence, see: http://landley.livejournal.com/47024.html http://landley.livejournal.com/47205.html http://landley.livejournal.com/47476.html Signed-off-by: Rob Landley <rlandley@parallels.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-24Remove MAYBE_BUILD_BUG_ONRusty Russell
Now BUILD_BUG_ON() can handle optimizable constants, we don't need MAYBE_BUILD_BUG_ON any more. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-24BUILD_BUG_ON: make it handle more casesRusty Russell
BUILD_BUG_ON used to use the optimizer to do code elimination or fail at link time; it was changed to first the size of a negative array (a nicer compile time error), then (in 8c87df457cb58fe75b9b893007917cf8095660a0) to a bitfield. This forced us to change some non-constant cases to MAYBE_BUILD_BUG_ON(); as Jan points out in that commit, it didn't work as intended anyway. bitfields: needs a literal constant at parse time, and can't be put under "if (__builtin_constant_p(x))" for example. negative array: can handle anything, but if the compiler can't tell it's a constant, silently has no effect. link time: breaks link if the compiler can't determine the value, but the linker output is not usually as informative as a compiler error. If we use the negative-array-size method *and* the link time trick, we get the ability to use BUILD_BUG_ON() under __builtin_constant_p() branches, and maximal ability for the compiler to detect errors at build time. We also document it thoroughly. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Jan Beulich <JBeulich@novell.com> Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
2011-01-24module: fix missing semicolons in MODULE macro usageRusty Russell
You always needed them when you were a module, but the builtin versions of the macros used to be more lenient. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-24param: add null statement to compiled-in module paramsLinus Walleij
Add an unused struct declaration statement requiring a terminating semicolon to the compile-in case to provoke an error if __MODULE_INFO() is used without the terminating semicolon. Previously MODULE_ALIAS("foo") (no semicolon) compiled fine if MODULE was not selected. Cc: Dan Carpenter <error27@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-24module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=nRusty Russell
lib/built-in.o:(__modver+0x8): undefined reference to `__modver_version_show' lib/built-in.o:(__modver+0x2c): undefined reference to `__modver_version_show' Simplest to just not emit anything: if they've disabled SYSFS they probably want the smallest kernel possible. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-24module: show version information for built-in modules in sysfsDmitry Torokhov
Currently only drivers that are built as modules have their versions shown in /sys/module/<module_name>/version, but this information might also be useful for built-in drivers as well. This especially important for drivers that do not define any parameters - such drivers, if built-in, are completely invisible from userspace. This patch changes MODULE_VERSION() macro so that in case when we are compiling built-in module, version information is stored in a separate section. Kernel then uses this data to create 'version' sysfs attribute in the same fashion it creates attributes for module parameters. Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-24CIFS: Remove pointless variable assignment in cifs_dfs_do_automount()Jesper Juhl
In fs/cifs/cifs_dfs_ref.c::cifs_dfs_do_automount() we have this code: ... mnt = ERR_PTR(-EINVAL); if (IS_ERR(tlink)) { mnt = ERR_CAST(tlink); goto free_full_path; } ses = tlink_tcon(tlink)->ses; rc = get_dfs_path(xid, ses, full_path + 1, cifs_sb->local_nls, &num_referrals, &referrals, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); cifs_put_tlink(tlink); mnt = ERR_PTR(-ENOENT); ... The assignment of 'mnt = ERR_PTR(-EINVAL);' is completely pointless. If we take the 'if (IS_ERR(tlink))' branch we'll set 'mnt' again and we'll also do so if we do not take the branch. There is no way we'll ever use 'mnt' with the assigned 'ERR_PTR(-EINVAL)' value, so we may as well just remove the pointless assignment. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-24drm/radeon/kms: simplify atom adjust pll setupAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2011-01-24drm/radeon/kms: match r6xx/r7xx/evergreen asic_reset with previous asicsAlex Deucher
Don't reset if the engine isn't busy. This matches the behavior of previous asics. Reseting a non-hung block can lead to a hang. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=33272 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2011-01-24drm/radeon/kms: make the mac rv630 quirk genericAlex Deucher
Seems some other boards do this as well. Reported-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@gmail.com>
2011-01-24drm/radeon/kms: fix a spelling error in an error messageAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2011-01-24drm/radeon/kms: Initialize pageflip spinlocks.Michel Dänzer
I'm amazed but not really surprised this worked on x86... Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2011-01-24selinux: return -ENOMEM when memory allocation failsDavidlohr Bueso
Return -ENOMEM when memory allocation fails in cond_init_bool_indexes, correctly propagating error code to caller. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: James Morris <jmorris@namei.org>
2011-01-24tpm: fix panic caused by "tpm: Autodetect itpm devices"Olof Johansson
commit 3f0d3d016d89a5efb8b926d4707eb21fa13f3d27 adds a check for PNP device id to the common tpm_tis_init() function, which in some cases (force=1) will be called without the device being a member of a pnp_dev. Oopsing and panics ensue. Move the test up to before the call to tpm_tis_init(), since it just modifies a global variable anyway. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-01-24TPM: Long default timeout fixRajiv Andrade
If duration variable value is 0 at this point, it's because chip->vendor.duration wasn't filled by tpm_get_timeouts() yet. This patch sets then the lowest timeout just to give enough time for tpm_get_timeouts() to further succeed. This fix avoids long boot times in case another entity attempts to send commands to the TPM when the TPM isn't accessible. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-01-24trusted keys: Fix a memory leak in trusted_update().Jesper Juhl
One failure path in security/keys/trusted.c::trusted_update() does not free 'new_p' while the others do. This patch makes sure we also free it in the remaining path (if datablob_parse() returns different from Opt_update). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: James Morris <jmorris@namei.org>
2011-01-24keys: add trusted and encrypted maintainersMimi Zohar
Add myself and David Safford as maintainers for trusted/encrypted keys. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-01-24encrypted-keys: rename encrypted_defined files to encryptedMimi Zohar
Rename encrypted_defined.c and encrypted_defined.h files to encrypted.c and encrypted.h, respectively. Based on request from David Howells. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-01-24trusted-keys: rename trusted_defined files to trustedMimi Zohar
Rename trusted_defined.c and trusted_defined.h files to trusted.c and trusted.h, respectively. Based on request from David Howells. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-01-23x86: Fix jump label with RO/NX module protection crashmatthieu castet
If we use jump table in module init, there are marked as removed in __jump_table section after init is done. But we already applied ro permissions on the module, so we can't modify a read only section (crash in remove_jump_label_module_init). Make the __jump_table section rw. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Cc: Xiaotian Feng <xtfeng@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Siarhei Liakh <sliakh.lkml@gmail.com> Cc: Xuxian Jiang <jiang@cs.ncsu.edu> Cc: James Morris <jmorris@namei.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Dave Jones <davej@redhat.com> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4D3C3F20.7030203@free.fr> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-23drm/i915: Recognise non-VGA display devicesChris Wilson
Starting with SandyBridge (though possible with earlier hacked BIOSes), the BIOS may initialise the IGFX as secondary to a discrete GPU. Prior, it would simply disable the integrated GPU. So we adjust our PCI class mask to match any DISPLAY_CLASS device. In such a configuration, the IGFX is not a primary VGA controller and so should not take part in VGA arbitration, and the error return from vga_client_register() is expected. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-23drm/i915: Fix use of invalid array size for ring->sync_seqnoChris Wilson
There are I915_NUM_RINGS-1 inter-ring synchronisation counters, but we were clearing I915_NUM_RINGS of them. Oops. Reported-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-22fs: fix new dcache.c kernel-doc warningsRandy Dunlap
Fix new fs/dcache.c kernel-doc warnings: Warning(fs/dcache.c:184): No description found for parameter 'dentry' Warning(fs/dcache.c:296): No description found for parameter 'parent' Warning(fs/dcache.c:1985): No description found for parameter 'dparent' Warning(fs/dcache.c:1985): Excess function parameter 'parent' description in 'd_validate' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-22rapidio: fix new kernel-doc warningsRandy Dunlap
Fix new rapidio kernel-doc warnings: Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev' Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev_port' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-22docbook: fix broken serial to tty/serial movementRandy Dunlap
Fix move of drivers/serial/ to drivers/tty/, where it broke one of the docbook files: docproc: drivers/serial/serial_core.c: No such file or directory Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-22perf tools: Fix time function double declaration with glibcThomas Renninger
It's enough to include the local "debug.h" file to trigger it. man time reveals this is already declared in glibc: time - get time in seconds -> rename the variable. Cc: Ingo Molnar <mingo@elte.hu> Cc: arjan@infradead.org LPU-Reference: <1295620209-13859-2-git-send-email-trenn@suse.de> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-21 00:17:38 +0000