summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-11-18ceph: fix readdir EOVERFLOW on 32-bit archsSage Weil
One of the readdir filldir_t callers was passing the raw ceph 64-bit ino instead of the hashed 32-bit one, producing an EOVERFLOW in the filler callback. Fix this by calling the ceph_vino_to_ino() helper to do the conversion. Reported-by: Jan Smets <jan.smets@alcatel-lucent.com> Tested-by: Jan Smets <jan.smets@alcatel-lucent.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-11ceph: fix frag offset for non-leftmost fragsSage Weil
We start at offset 2 for the leftmost frag, and 0 for subsequent frags. When we reach the end (rightmost), we go back to 2. This fixes readdir on fragmented (large) directories. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-11ceph: fix dangling pointerSage Weil
Clear fi->last_name when it's freed. The only caller is rewinddir() (or equivalent lseek). Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-09ceph: explicitly specify page alignment in network messagesSage Weil
The alignment used for reading data into or out of pages used to be taken from the data_off field in the message header. This only worked as long as the page alignment matched the object offset, breaking direct io to non-page aligned offsets. Instead, explicitly specify the page alignment next to the page vector in the ceph_msg struct, and use that instead of the message header (which probably shouldn't be trusted). The alloc_msg callback is responsible for filling in this field properly when it sets up the page vector. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-09ceph: make page alignment explicit in osd interfaceSage Weil
We used to infer alignment of IOs within a page based on the file offset, which assumed they matched. This broke with direct IO that was not aligned to pages (e.g., 512-byte aligned IO). We were also trusting the alignment specified in the OSD reply, which could have been adjusted by the server. Explicitly specify the page alignment when setting up OSD IO requests. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-09ceph: fix comment, remove extraneous argsSage Weil
The offset/length arguments aren't used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08ceph: fix update of ctime from MDSSage Weil
The client can have a newer ctime than the MDS due to AUTH_EXCL and XATTR_EXCL caps as well; update the check in ceph_fill_file_time appropriately. This fixes cases where ctime/mtime goes backward under the right sequence of local updates (e.g. chmod) and mds replies (e.g. subsequent stat that goes to the MDS). Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08ceph: fix version check on racing inode updatesSage Weil
We may get updates on the same inode from multiple MDSs; generally we only pay attention if the update is newer than what we already have. The exception is when an MDS sense unstable information, in which case we always update. The old > check got this wrong when our version was odd (e.g. 3) and the reply version was even (e.g. 2): the older stale (v2) info would be applied. Fixed and clarified the comment. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08ceph: fix uid/gid on resent mds requestsSage Weil
MDS requests can be rebuilt and resent in non-process context, but were filling in uid/gid from current_fsuid/gid. Put that information in the request struct on request setup. This fixes incorrect (and root) uid/gid getting set for requests that are forwarded between MDSs, usually due to metadata migrations. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08ceph: fix rdcache_gen usage and invalidateSage Weil
We used to use rdcache_gen to indicate whether we "might" have cached pages. Now we just look at the mapping to determine that. However, some old behavior remains from that transition. First, rdcache_gen == 0 no longer means we have no pages. That can happen at any time (presumably when we carry FILE_CACHE). We should not reset it to zero, and we should not check that it is zero. That means that the only purpose for rdcache_revoking is to resolve races between new issues of FILE_CACHE and an async invalidate. If they are equal, we should invalidate. On success, we decrement rdcache_revoking, so that it is no longer equal to rdcache_gen. Similarly, if we success in doing a sync invalidate, set revoking = gen - 1. (This is a small optimization to avoid doing unnecessary invalidate work and does not affect correctness.) Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-07ceph: re-request max_size if cap auth changesSage Weil
If the auth cap migrates to another MDS, clear requested_max_size so that we resend any pending max_size increase requests. This fixes potential hangs on writes that extend a file and race with an cap migration between MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-07ceph: only let auth caps update max_sizeSage Weil
Only the auth MDS has a meaningful max_size value for us, so only update it in fill_inode if we're being issued an auth cap. Otherwise, a random stat result from a non-auth MDS can clobber a meaningful max_size, get the client<->mds cap state out of sync, and make writes hang. Specifically, even if the client re-requests a larger max_size (which it will), the MDS won't respond because as far as it knows we already have a sufficiently large value. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-07ceph: fix open for write on clustered mdsSage Weil
Normally when we open a file we already have a cap, and simply update the wanted set. However, if we open a file for write, but don't have an auth cap, that doesn't work; we need to open a new cap with the auth MDS. Only reuse existing caps if we are opening for read or the existing cap is auth. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-07ceph: fix bad pointer dereference in ceph_fill_traceSage Weil
We dereference *in a few lines down, but only set it on rename. It is apparently pretty rare for this to trigger, but I have been hitting it with a clustered MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-01ceph: fix small seq message skippingSage Weil
If the client gets out of sync with the server message sequence number, we normally skip low seq messages (ones we already received). The skip code was also incrementing the expected seq, such that all subsequent messages also appeared old and got skipped, and an eventual timeout on the osd connection. This resulted in some lagging requests and console messages like [233480.882885] ceph: skipping osd22 10.138.138.13:6804 seq 2016, expected 2017 [233480.882919] ceph: skipping osd22 10.138.138.13:6804 seq 2017, expected 2018 [233480.882963] ceph: skipping osd22 10.138.138.13:6804 seq 2018, expected 2019 [233480.883488] ceph: skipping osd22 10.138.138.13:6804 seq 2019, expected 2020 [233485.219558] ceph: skipping osd22 10.138.138.13:6804 seq 2020, expected 2021 [233485.906595] ceph: skipping osd22 10.138.138.13:6804 seq 2021, expected 2022 [233490.379536] ceph: skipping osd22 10.138.138.13:6804 seq 2022, expected 2023 [233495.523260] ceph: skipping osd22 10.138.138.13:6804 seq 2023, expected 2024 [233495.923194] ceph: skipping osd22 10.138.138.13:6804 seq 2024, expected 2025 [233500.534614] ceph: tid 6023602 timed out on osd22, will reset osd Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-27Revert "ceph: update issue_seq on cap grant"Sage Weil
This reverts commit d91f2438d881514e4a923fd786dbd94b764a9440. The intent of issue_seq is to distinguish between mds->client messages that (re)create the cap and those that do not, which means we should _only_ be updating that value in the create paths. By updating it in handle_cap_grant, we reset it to zero, which then breaks release. The larger question is what workload/problem made me think it should be updated here... Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: do not carry i_lock for readdir from dcacheSage Weil
We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20fs/ceph/xattr.c: Use kmemdupJulia Lawall
Convert a sequence of kmalloc and memcpy to use kmemdup. The semantic patch that performs this transformation is: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,flag,len; expression arg,e1,e2; statement S; @@ a = - \(kmalloc\|kzalloc\)(len,flag) + kmemdup(arg,len,flag) <... when != a if (a == NULL || ...) S ...> - memcpy(a,arg,len+1); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20rbd: passing wrong variable to bvec_kunmap_irq()Dan Carpenter
We should be passing "buf" here insead of "bv". This is tricky because it's not the same as kmap() and kunmap(). GCC does warn about it if you compile on i386 with CONFIG_HIGHMEM. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20rbd: null vs ERR_PTRDan Carpenter
ceph_alloc_page_vector() returns ERR_PTR(-ENOMEM) on errors. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: fix num_pages_free accounting in pagelistSage Weil
Decrement the free page counter when removing a page from the free_list. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: add CEPH_MDS_OP_SETDIRLAYOUT and associated ioctl.Greg Farnum
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: don't crash when passed bad mount optionsYehuda Sadeh
This only happened when parse_extra_token was not passed to ceph_parse_option() (hence, only happened in rbd). Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20ceph: fix debugfs warningsRandy Dunlap
Include "super.h" outside of CONFIG_DEBUG_FS to eliminate a compiler warning: fs/ceph/debugfs.c:266: warning: 'struct ceph_fs_client' declared inside parameter list fs/ceph/debugfs.c:266: warning: its scope is only this definition or declaration, which is probably not what you want fs/ceph/debugfs.c:271: warning: 'struct ceph_fs_client' declared inside parameter list Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20block: rbd: removing unnecessary testYehuda Sadeh
rbd_get_segment() can't return a negative value, we don't need to check the return output. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20block: rbd: fixed may leaksVasiliy Kulikov
rbd_client_create() doesn't free rbdc, this leads to many leaks. seg_len in rbd_do_op() is unsigned, so (seg_len < 0) makes no sense. Also if fixed check fails then seg_name is leaked. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20ceph: switch from BKL to lock_flocks()Sage Weil
Switch from using the BKL explicitly to the new lock_flocks() interface. Eventually this will turn into a spinlock. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: preallocate flock state without locks heldGreg Farnum
When the lock_kernel() turns into lock_flocks() and a spinlock, we won't be able to do allocations with the lock held. Preallocate space without the lock, and retry if the lock state changes out from underneath us. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: add pagelist_reserve, pagelist_truncate, pagelist_set_cursorGreg Farnum
These facilitate preallocation of pages so that we can encode into the pagelist in an atomic context. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: use mapping->nrpages to determine if mapping is emptySage Weil
This is simpler and faster. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: only invalidate on check_caps if we actually have pagesSage Weil
The i_rdcache_gen value only implies we MAY have cached pages; actually check the mapping to see if it's worth bothering with an invalidate. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: do not hide .snap in root directorySage Weil
Snaps in the root directory are now supported by the MDS, and harmless on older versions. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20rbd: introduce rados block device (rbd), based on libcephYehuda Sadeh
The rados block device (rbd), based on osdblk, creates a block device that is backed by objects stored in the Ceph distributed object storage cluster. Each device consists of a single metadata object and data striped over many data objects. The rbd driver supports read-only snapshots. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: factor out libceph from Ceph file systemYehuda Sadeh
This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph-rbd: osdc support for osd call and rollback operationsYehuda Sadeh
This will be used for rbd snapshots administration. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20ceph: messenger and osdc changes for rbdYehuda Sadeh
Allow the messenger to send/receive data in a bio. This is added so that we wouldn't need to copy the data into pages or some other buffer when doing IO for an rbd block device. We can now have trailing variable sized data for osd ops. Also osd ops encoding is more modular. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: refactor osdc requests creation functionsYehuda Sadeh
The osd requests creation are being decoupled from the vino parameter, allowing clients using the osd to use other arbitrary object names that are not necessarily vino based. Also, calc_raw_layout now takes a snap id. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20ceph: lookup pool in osdmap by nameYehuda Sadeh
Implement a pool lookup by name. This will be used by rbd. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-14Linux 2.6.36-rc8v2.6.36-rc8Linus Torvalds
2010-10-14Un-inline the core-dump helper functionsLinus Torvalds
Tony Luck reports that the addition of the access_ok() check in commit 0eead9ab41da ("Don't dump task struct in a.out core-dumps") broke the ia64 compile due to missing the necessary header file includes. Rather than add yet another include (<asm/unistd.h>) to make everything happy, just uninline the silly core dump helper functions and move the bodies to fs/exec.c where they make a lot more sense. dump_seek() in particular was too big to be an inline function anyway, and none of them are in any way performance-critical. And we really don't need to mess up our include file headers more than they already are. Reported-and-tested-by: Tony Luck <tony.luck@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ehea: Fix a checksum issue on the receive path net: allow FEC driver to use fixed PHY support tg3: restore rx_dropped accounting b44: fix carrier detection on bind net: clear heap allocations for privileged ethtool actions NET: wimax, fix use after free ATM: iphase, remove sleep-inside-atomic ATM: mpc, fix use after free ATM: solos-pci, remove use after free net/fec: carrier off initially to avoid root mount failure r8169: use device model DMA API r8169: allocate with GFP_KERNEL flag when able to sleep
2010-10-14Don't dump task struct in a.out core-dumpsLinus Torvalds
akiphie points out that a.out core-dumps have that odd task struct dumping that was never used and was never really a good idea (it goes back into the mists of history, probably the original core-dumping code). Just remove it. Also do the access_ok() check on dump_write(). It probably doesn't matter (since normal filesystems all seem to do it anyway), but he points out that it's normally done by the VFS layer, so ... [ I suspect that we should possibly do "vfs_write()" instead of calling ->write directly. That also does the whole fsnotify and write statistics thing, which may or may not be a good idea. ] And just to be anal, do this all for the x86-64 32-bit a.out emulation code too, even though it's not enabled (and won't currently even compile) Reported-by: akiphie <akiphie@lavabit.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-13Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: ioat2: fix performance regression
2010-10-13Merge branch 'for-2.6.36' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux: nfsd: fix BUG at fs/nfsd/nfsfh.h:199 on unlink
2010-10-13Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ring-buffer: Fix typo of time extends per page perf, MIPS: Support cross compiling of tools/perf for MIPS perf: Fix incorrect copy_from_user() usage
2010-10-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: relax ioremap prohibition (309caa9) for -final and -stable ARM: 6440/1: ep93xx: DMA: fix channel_disable cpuimx27: fix i2c bus selection cpuimx27: fix compile when ULPI is selected ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9 ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processors ARM: fix section mismatch warnings in Versatile Express ARM: 6412/1: kprobes-decode: add support for MOVW instruction ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to data corruption
2010-10-13Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: iommu-load cam register before flushing the entry
2010-10-13Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: Silent spurious error message drm/radeon/kms: fix bad cast/shift in evergreen.c drm/radeon/kms: make TV/DFP table info less verbose drm/radeon/kms: leave certain CP int bits enabled drm/radeon/kms: avoid corner case issue with unmappable vram V2
2010-10-13Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, numa: For each node, register the memory blocks actually used x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order x86, mce, therm_throt.c: Fix missing curly braces in error handling logic
2010-10-13ioat2: fix performance regressionDan Williams
Commit 0793448 "DMAENGINE: generic channel status v2" changed the interface for how dma channel progress is retrieved. It inadvertently exported an internal helper function ioat_tx_status() instead of ioat_dma_tx_status(). The latter polls the hardware to get the latest completion state, while the helper just evaluates the current state without touching hardware. The effect is that we end up waiting for completion timeouts or descriptor allocation errors before the completion state is updated. iperf (before fix): [SUM] 0.0-41.3 sec 364 MBytes 73.9 Mbits/sec iperf (after fix): [SUM] 0.0- 4.5 sec 499 MBytes 940 Mbits/sec This is a regression starting with 2.6.35. Cc: <stable@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Reported-by: Richard Scobie <richard@sauce.co.nz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-02 06:08:26 +0000