summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-07-05decnet: Use neighbours privately in dn_route struct.David S. Miller
This allows an easy conversion away from dst_get_neighbour*(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05neigh: Convert over to dst_neigh_lookup_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05br_netfilter: Convert to dst_neigh_lookup_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05cxgb4i: Convert over to dst_neigh_lookup().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05cxgbi: Convert over to dst_neigh_lookup().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05qeth: Convert over to dst_neigh_lookup_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05ipoib: Convert over to dev_lookup_neigh_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05sch_teql: Convert over to dev_neigh_lookup_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05net: Add optional SKB arg to dst_ops->neigh_lookup().David S. Miller
Causes the handler to use the daddr in the ipv4/ipv6 header when the route gateway is unspecified (local subnet). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05net: Do delayed neigh confirmation.David S. Miller
When a dst_confirm() happens, mark the confirmation as pending in the dst. Then on the next packet out, when we have the neigh in-hand, do the update. This removes the dependency in dst_confirm() of dst's having an attached neigh. While we're here, remove the explicit 'dst' NULL check, all except 2 or 3 call sites ensure it's not NULL. So just fix those cases up. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05sunrpc: Don't do a dst_confirm() on an input routes.David S. Miller
xs_udp_data_ready() is operating on received packets, and tries to do a dst_confirm() on the dst attached to the SKB. This isn't right, dst confirmation is for output routes, not input rights. It's for resetting the timers on the nexthop neighbour entry for the route, indicating that we've got good evidence that we've successfully reached it. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05ipv4: Don't report neigh uptodate state in rtcache procfs.David S. Miller
Soon routes will not have a cached neigh attached, nor will we be able to necessarily go directly to a neigh from an arbitrary route. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05ipv4: Make neigh lookups directly in output packet path.David S. Miller
Do not use the dst cached neigh, we'll be getting rid of that. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04ipv4: Fix crashes in ip_options_compile().David S. Miller
The spec_dst uses should be guarded by skb_rtable() being non-NULL not just the SKB being non-null. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-01Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Included changes: - The last batch of patches aimed to clean the batman-adv namespace - a couple of style fixes - a fix for the ethtool support - a fix to prevent sending unicast packets with an uninitialised header field Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-01batman-adv: Don't leak information through uninitialized packet fieldsSven Eckelmann
The reserved fields in batman-adv packets are not set to a constant value. The content of these memory regions is leaked unintentionally to the network. This regression was introduced in 3b27ffb00fbe9d9189715ea13ce8712e2f0cb0c5 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-01batman-adv: fix counter summary lengthMarek Lindner
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-01batman-adv: Fix alignment after opened parenthesesSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-01batman-adv: Remove space before semicolonSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-01batman-adv: Remove bat_ prefix from bat_{debugfs, sysfs}.{c, h}Sven Eckelmann
The "bat_" prefix in the source files implementing the batman-adv sysfs and debugfs interface doesn't have a special meaning and are only used by these files and files that implement the actual B.A.T.M.A.N. path finding algorithm. The prefix is better suited to mark files that are used to implement the main part of the path finding. All other files should not use it and therefore gets renamed. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Transform BATADV_LOG_BUFF(idx) into functionSven Eckelmann
The linux Documentation/CodingStyle says that: * Chapter 12: "inline functions are preferable to macros resembling functions" * Chapter 12.2: Depending on local variables with a magic name is bad * Chapter 12.3: Macros with arguments used as l-value are bad Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix types structs with batadv_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix packet structs with batadv_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix local sysfs struct with batadv_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix hash struct and typedef with batadv_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix local debugfs structs with batadv_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix main enum with BATADV_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix packet enum with BATADV_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix types enum with BATADV_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix hard-interface enum with BATADV_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix gateway enum with BATADV_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01phy: add the EEE support and the way to access to the MMD registers.Giuseppe CAVALLARO
This patch adds the support for the Energy-Efficient Ethernet (EEE) to the Physical Abstraction Layer. To support the EEE we have to access to the MMD registers 3.20 and 7.60/61. So two new functions have been added to read/write the MMD registers (clause 45). An Ethernet driver (I tested the stmmac) can invoke the phy_init_eee to properly check if the EEE is supported by the PHYs and it can also set the clock stop enable bit in the 3.0 register. The phy_get_eee_err can be used for reporting the number of time where the PHY failed to complete its normal wake sequence. In the end, this patch also adds the EEE ethtool support implementing: o phy_ethtool_set_eee o phy_ethtool_get_eee v1: initial patch v2: fixed some errors especially on naming convention v3: renamed again the mmd read/write functions thank to Ben's feedback v4: moved file to phy.c and added the ethtool support. v5: fixed phy_adv_to_eee, phy_eee_to_supported, phy_eee_to_adv return values according to ethtool API (thanks to Ben's feedback). Renamed some macros to avoid too long names. v6: fixed kernel-doc comments to be properly parsed. Fixed the phy_init_eee function: we need to check which link mode was autonegotiated and then the corresponding bits in 7.60 and 7.61 registers. v7: reviewed the way to get the negotiated settings. v8: fixed a problem in the phy_init_eee return value erroneously added when included the phy_read_status call. v9: do not remove the MDIO_AN_EEE_ADV_100TX and MDIO_AN_EEE_ADV_1000T and fixed the eee_{cap,lp,adv} declaration as "int" instead of u16. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-01stmmac: add the Energy Efficient Ethernet supportGiuseppe CAVALLARO
This patch adds the Energy Efficient Ethernet support to the stmmac. Please see the driver's documentation for further details about this support in the driver. Thanks also goes to Rayagond Kokatanur for his first implementation. Note: to clearly manage and expose the lpi interrupt status and eee ethtool stats I've had to do some modifications to the driver's design and I found really useful to move other parts of the code (e.g. mmc irq stat) in the main directly. So this means that some core has been reworked to introduce the EEE. v1: initial patch v2: fixed some sparse issues (typos) v3: erroneously sent the v2 renamed as v3 v4: o Fixed the return value of the stmmac_eee_init as suggested by D.Miller o Totally reviewed the ethtool support for EEE o Added a new internal parameter to tune the SW timer for TX LPI. v5: do not change any eee setting in case of the stmmac_ethtool_op_set_eee fails (it has to return -EOPNOTSUPP in that case). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-01stmmac: update the driver Documentation and add EEEGiuseppe CAVALLARO
This patch updates the stmmac's documentation adding some missing files in the section used to describe the internal driver's structure. Also the patch adds a new section to describe the EEE support. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-01stmmac: do not use strict_strtoul but kstrtointGiuseppe CAVALLARO
This patch replaces the obsolete strict_strtoul with kstrtoint. v2: also removed casting on kstrtoul. v3: use kstrtoint instead of kstrtoul due to all vars are integer. thanks to E. Dumazet. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-30ipv4: Clarify in docs that accept_local requires rp_filter.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-30netfilter: use kfree_skb() not kfree()Dan Carpenter
This was should be a kfree_skb() here to free the sk_buff pointer. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-30dummy: use IFF_LIVE_ADDR_CHANGE priv_flagJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-30team: use IFF_LIVE_ADDR_CHANGE priv_flagJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-30virtio_net: use IFF_LIVE_ADDR_CHANGE priv_flagJiri Pirko
Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-30net: introduce new priv_flag indicating iface capable of change mac when runningJiri Pirko
Introduce IFF_LIVE_ADDR_CHANGE priv_flag and use it to disable netif_running() check in eth_mac_addr() Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29netlink: add nlk->netlink_bind hook for module auto-loadingPablo Neira Ayuso
This patch adds a hook in the binding path of netlink. This is used by ctnetlink to allow module autoloading for the case in which one user executes: conntrack -E So far, this resulted in nfnetlink loaded, but not nf_conntrack_netlink. I have received in the past many complains on this behaviour. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29netlink: add netlink_kernel_cfg parameter to netlink_kernel_createPablo Neira Ayuso
This patch adds the following structure: struct netlink_kernel_cfg { unsigned int groups; void (*input)(struct sk_buff *skb); struct mutex *cb_mutex; }; That can be passed to netlink_kernel_create to set optional configurations for netlink kernel sockets. I've populated this structure by looking for NULL and zero parameters at the existing code. The remaining parameters that always need to be set are still left in the original interface. That includes optional parameters for the netlink socket creation. This allows easy extensibility of this interface in the future. This patch also adapts all callers to use this new interface. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John Linville says: ==================== Here is another batch of updates intended for 3.6. This includes a number of pulls, including ones from the mac80211, iwlwifi, ath6kl, and wl12xx trees. I also pulled from the wireless tree to avoid potential build conflicts. There are a number of other patches applied directly, including a number for the Broadcom drivers and the mwifiex driver. The updates cover the usual variety of new hardware support and feature enhancements. It's all good work, but there aren't any big headliners. This does resolve a net-next/wireless-next merge conflict reported by Stephen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29cnic: Fix mmap regression.Michael Chan
commit 1f85d58cdf15354a7120fc9ccc9bb9c45b53af88 cnic: Remove uio mem[0]. introduced a regression as older versions of userspace app still rely on this mmap. Restore the mmap functionality and get the base address from pci_resource_start() as the nedev->base_addr has been deprecated for PCI devices. Update version to 2.5.12. Signed-off-by: Michael Chan <mchan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
2012-06-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-06-29ipv4: Elide fib_validate_source() completely when possible.David S. Miller
If rpfilter is off (or the SKB has an IPSEC path) and there are not tclassid users, we don't have to do anything at all when fib_validate_source() is invoked besides setting the itag to zero. We monitor tclassid uses with a counter (modified only under RTNL and marked __read_mostly) and we protect the fib_validate_source() real work with a test against this counter and whether rpfilter is to be done. Having a way to know whether we need no tclassid processing or not also opens the door for future optimized rpfilter algorithms that do not perform full FIB lookups. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29net: l2tp_eth: provide tx_dropped counterEric Dumazet
Change l2tp_xmit_skb() to return NET_XMIT_DROP in case skb is dropped. Use kfree_skb() instead dev_kfree_skb() for drop_monitor pleasure. Support tx_dropped counter for l2tp_eth Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29netxen_nic: restrict force firmware dump when dump is disabled.Manish chopra
o Set the ethtool_dump flag (=ETH_FW_DUMP_DISABLE) when dump is disabled. o update driver version to 4.0.80 Signed-off-by: Manish chopra <manish.chopra@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>