summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-10-19ARM: imx: add lost 3rd imx-i2c device for mx35Marc Kleine-Budde
During the reorganisation of the imx-i2c devices (in 64de5ec168d9743903e6ec482c3e9f37af49f9c1) the 3rd imx-i2c device for the mx35 got lost. This patch adds the missing device. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-19ARM: imx: Add iram allocator functionsDinh Nguyen
Add IRAM(Internal RAM) allocation functions using GENERIC_ALLOCATOR. The allocation size is 4KB multiples to guarantee alignment. The idea for these functions is for i.MX platforms to use them to dynamically allocate IRAM usage. Applies on 2.6.36-rc7 Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Reviewed-by: Amit Kucheria <amit.kucheria@canonical.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11mx51: efikamx: add otg supportAmit Kucheria
Ethernet hangs off OTG Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11mx51: add support for genesi efikamx nettopAmit Kucheria
Get serial port working for now Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11spi/imx: Support different fifo sizesDavid Jander
The i.MX51 ECSPI has a fifo size of 64 entries instead of 8 entries as found on the other cspi bus devices. Cc: Jason Wang <jason77.wang@gmail.com> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: iomux-mx51: Add AUD5 pinmux definitionsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11mx25/clocks: match esdhc-clocks to platform deviceWolfram Sang
So the correct clock will be taken for each of the two independent controllers. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11mxc/gpio: make _set_value work with values != 0/1Peter Korsgaard
Documentation/gpio.txt specifies that the value argument to gpio_set_value() should be handled as a boolean (E.G. != 0 is high), so use the same logic as in _set_direction(). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11MX35: Fix bogus L2 cache settingsJuergen Beisert
i.MX35 CPUs marked with "MCIMX357CJQ5C M99V CTHA0943B" are coming with bogus L2 cache settings. If these settings are kept unmodified prior enabling the L2 cache the CPU runs amok immediately when its enabled. This fix should not hurt already working CPUs, as they are using the written register value already. Its currently unknown if its possible to detect the production lot from the software to fix only affected CPUs. While at it, make sure that mxc_init_l2x0 is only executed on i.MX31/35 Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: mx3/cpuimx35: mark otg_pdata and usbh1_pdata as maybe unusedUwe Kleine-König
This fixes arch/arm/mach-mx3/mach-cpuimx35.c:143: warning: 'otg_pdata' defined but not used arch/arm/mach-mx3/mach-cpuimx35.c:148: warning: 'usbh1_pdata' defined but not used when USB_ULPI is not selected. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: imx: dynamically register fec devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: imx: fix/define clocks and create devices for imx dmaUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: mx35: Add mx35_revision function to query the silicon revisionEric Bénard
Based on work done earlier by Sascha Hauer Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Eric Bénard <eric@eukrea.com> [ukl: actually squash the two approaches together] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: mx3: use MX3x_ prefixed version of CHIP_REV_xSascha Hauer
Also, remove the deprecated symbols from arch/arm/mach-mx3/cpu.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11eukrea_mbimxsd for cpuimx25: add CAN & SDCard supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11i.mx25: add esdhc supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11eukrea_mbimxsd for cpuimx35: add CAN & SDCard supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11arm: pcm043: add esdhc-device to boardconfigWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11arm: imx35: add esdhc-device to MX35-platformWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11arm: imx: add generic esdhc deviceWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-04mach-cpuimx35: remove unecessary tsc2007 functions + style cleanupEric Bénard
- remove functions which are no more necessary for tsc2007 - indent platform_data for better readability Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx/pca100: only specify i2c device type onceUwe Kleine-König
The first argument to I2C_BOARD_INFO is used to assign .type, so it should not be specified a second time. For the rtc-pcf8563/pcf8563 entry gcc preferred pcf8563, so did I. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx/pcm970: make platform_data staticUwe Kleine-König
This fixes the following sparse warning: arch/arm/mach-imx/pcm970-baseboard.c:224:13: warning: symbol 'pcm970_baseboard_init' was not declared. Should it be static? Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: make all pin lists const and signed, move to .init where possibleUwe Kleine-König
Making the lists signed fixes sparse warnings like: arch/arm/mach-imx/mach-mx27_3ds.c:94:31: warning: incorrect type in argument 1 (different signedness) arch/arm/mach-imx/mach-mx27_3ds.c:94:31: expected int const *pin_list arch/arm/mach-imx/mach-mx27_3ds.c:94:31: got unsigned int static [toplevel] *<noident> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx/pcm038: make regulator platform data staticUwe Kleine-König
This fixes the following sparse warning: arch/arm/mach-imx/pcm970-baseboard.c:203:30: warning: symbol 'pcm970_sja1000_platform_data' was not declared. Should it be static? Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx/clock-imx27: Pass NULL as function callback, not 0Uwe Kleine-König
This fixes many sparse warnings like: arch/arm/mach-imx/clock-imx27.c:597:1: warning: Using plain integer as NULL pointer Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5: clock-imx51: make *ipg clocks secondary clocks of their ↵Sascha Hauer
corresponding peripheral clocks Currently the uarts and timer only work because they are turned on by reset default. Make them secondary clocks of their corresponding peripheral clocks to make sure they are turned on when necessary. Also, register some clocks to get rid of compiler warnings Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5: dynamically register mxc-nand deviceSascha Hauer
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: reorganize nand registration to use a structUwe Kleine-König
Addiontionally make the interrupt #defines match the base address defines MX.._NFC_BASE_ADDR. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx51: Add audmux supportSascha Hauer
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx51: add imx-ssi devicesSascha Hauer
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx51: dynamically register imx-uart devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5: Add Nand clock supportSascha Hauer
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/iomux-mx51: Fix input path of some pins in gpio modeSascha Hauer
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/iomux-mx51: Add aud3 primary function definesSascha Hauer
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/iomux-mx51: Add SPI controller padsSascha Hauer
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stageJason Wang
A 2M bytes SPI NOR flash(sst25vf016b) is soldered on the mx51_3ds board. So add the corresponding device for it. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/mx51_3ds: add eCSPI2 support on the imx51_3ds boardJason Wang
Signed-off-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds boardJason Wang
On the imx51_3ds board, eCSPI2 is connected to a SPI NOR flash, now add iomux definitions for those used pins. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/clock-mx51: add spi clocksJason Wang
Signed-off-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/clock-mx51: new macro that defines a clk with all membersUwe Kleine-König
Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/clock-mx51: refactor ccgr callbacks to use common codeUwe Kleine-König
Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5: add spi_imx device registrationUwe Kleine-König
Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: use platform ids for spi_imx devicesUwe Kleine-König
The driver recently learned to handle platform ids. Make use of this new feature. The up side is that the driver needs less knowledge about the spi interfaces used on different SoCs. Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01spi/imx: add support for imx51's eCSPI and CSPIUwe Kleine-König
i.MX51 comes with two eCSPI interfaces (that are quite different from what was known before---the tried and tested Freescale way) and a CSPI interface that is identical to the devices found on i.MX25 and i.MX35. This patch is a merge of two very similar patches (by Jason Wang and Sascha Hauer resp.) plus a (now hopefully correct) reimplementation of the clock calculation. Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01spi/imx: save the spi chip select in config struct, not the gpio to useUwe Kleine-König
This prepares adding support for imx51's eCSPI. This IP has seperate control and config bits for all four supported chip selects, so the config routine needs to know which chip select is being used even if the chipselect is realized by a gpio. Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01spi/imx: get rid of more ifs depending on the used cpuUwe Kleine-König
Nearly everything that is needed is provided by the version of the SPI IP. Now the only checks left using cpu_is_... are clk divider tuning on mx21/mx27 and autodetection (which will die soon). Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01spi/imx: convert driver to use platform idsUwe Kleine-König
This has the advantage not to need to much cpu_is_... macros. Still more when imx51 support is added which has two different spi interfaces which would introduce additional checks on the device id. With this setup it's not possible for the compiler anymore to detect the unused functions, so four additional kconfig symbols are introduced to ifdef out the unneeded functions in the callback array and all these functions are marked with __maybe_unused to suppress the corresponding gcc warnings. Comparing the driver footprint with and without the patch for a mx27 kernel yields: add/remove: 2/0 grow/shrink: 2/0 up/down: 280/0 (280) function old new delta spi_imx_devtype - 192 +192 spi_imx_probe 980 1032 +52 spi_imx_devtype_data - 32 +32 spi_imx_setupxfer 276 280 +4 Later when the platform code is updated to use the platform ids, the autodetection can be removed which will make the driver a bit smaller again. (~60 Bytes in my test.) Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01spi/imx: default to m on platforms that have such devicesUwe Kleine-König
Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: fix name of macros to add imx-i2c devicesUwe Kleine-König
This is a follow up to c698715 (ARM: imx: dynamically register imx-i2c devices (imx27)) 2b92084 (ARM: imx: dynamically register imx-i2c devices (imx21)) 6348e6b (ARM: imx: dynamically register imx-i2c devices (imx1)) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-22 16:42:20 +0000