summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-02-02imx: define per SOC ..._PHYS_OFFSET and use these in favour of PHYS_OFFSETUwe Kleine-König
This is a further step in allowing to build a kernel image for more than one imx SOC. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-02imx2x: convert serial.c to use soc-prefixed constantsUwe Kleine-König
This makes the file compilable for a kernel that supports both imx21 and imx27. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-02mxc91231: redefine MXC91231_IO_ADDRESS using IMX_IO_ADDRESSUwe Kleine-König
This simplifies the macro and makes is similar to the other ..._IO_ADDRESS macros defined for imx SOCs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-02mxc91231: use MXC91231_IO_ADDRESS instead of MXC91231_AIPS1_IO_ADDRESSUwe Kleine-König
Apart from MXC91231_IO_ADDRESS itself this was the only usage of MXC91231_AIPS1_IO_ADDRESS. Now MXC91231_IO_ADDRESS can be recoded with IMX_IO_ADDRESS and all helper macros can go away. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Daniel Schaeffer <daniel.schaeffer@timesys.com> Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com> Cc: Ivo Clarysse <ivo.clarysse@gmail.com>
2010-02-02imx: WARN in clk_disable if the clock isn't enabledUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk>
2010-01-30mx25: deprecate UART1_BASE_ADDR and UART2_BASE_ADDRUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-01-30mx1: prefix SOC specific defines with MX1_ and deprecate old namesUwe Kleine-König
The old names are defined only if the cpp symbol IMX_NEEDS_DEPRECATED_SYMBOLS exists, which is defined (for now) for all files below arch/arm/mach-mx1. This was done earlier for mx2 and mx3, too. USBD_INT0 is for now defined unconditionally to prevent breaking drivers/usb/gadget/imx_udc. While at it use IMX_IO_ADDRESS to define MX1_IO_ADDRESS which adds a cast to the IO_ADDRESS macro fixing many warnings like arch/arm/mach-mx1/generic.c:51: warning: passing argument 1 of 'mxc_init_irq' makes pointer from integer without a cast . Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-01-29mx25pdk: platform code for the DryIce RTC moduleBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-29mx25: add support for the DryIce rtcBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-29Merge branch 'mxc-rc' into mxc-masterSascha Hauer
2010-01-29mx35: add a missing comma in a pad definitionUwe Kleine-König
Reported-by: Tim Sander <tstone@vlsi.informatik.tu-darmstadt.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26ARM: IMX31: configure pins iomux for SDHC setup on litekit board.Vladimir Zapolskiy
This patch adds SDHC support, and corrects current pins setup. Added irq handling on card removal. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx2/mx3: debug-macro.S needs deprecated symbolsUwe Kleine-König
This fixes: arch/arm/kernel/debug.S:147: Error: constant expression expected -- `ldrne r3,=(((UART1_BASE_ADDR)-AIPI_BASE_ADDR)+AIPI_BASE_ADDR_VIRT)' arch/arm/kernel/debug.S:163: Error: constant expression expected -- `ldrne r3,=(((UART1_BASE_ADDR)-AIPI_BASE_ADDR)+AIPI_BASE_ADDR_VIRT)' when compiling for mx2 with CONFIG_DEBUG_LL=y. A similar error exists on mx3 and is fixed by this commit, too. These were introduced by aae7019382896cf1075a93acc564e42601bc44a2. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx25: make the FEC AHB clk secondary of the IPGBaruch Siach
This makes the FEC clock configuration consistent with the UART one. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx25: fix time accountingBaruch Siach
The gpt_clk rate function doesn't consider the PER divider. This causes a significant drift in time accounting. Fix this by introducing the correct rate calculation function. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx25: properly initialize clocksBaruch Siach
This patch disables all unnecessary clock in mx25_clocks_init() to make a clean start, the same as is being done for the rest of the i.MX chips. This patch was tested on i.MX25 PDK. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx25: remove unused mx25_clocks_init() argumentBaruch Siach
The fref is needless on mx25 since the reference clock is fixed at 24MHz. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26i.MX25: implement secondary clocks for uarts and fecSascha Hauer
For uarts and fec need two clocks, implement it using the secondary clock field in struct clk. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26i.MX25: Allow secondary clocks in DEFINE_CLOCKSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-21ARM: MX3: Fixed typo in declared enum type name.Vladimir Zapolskiy
To distinguish between mx31lite and mx31lilly boards better to use different enum types. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-14mx25pdk: add NAND device supportBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-14mx25: add NAND supportBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-14mtd: mxc_nand: add MX25 to KconfigBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-14Merge branch 'imx' of git://git.pengutronix.de/git/ukl/linux-2.6 into mxc-masterSascha Hauer
2010-01-12MXC: Add AUDMUXv2 register decode to debugfsMark Brown
Since AUDMUX configuration appears to be one of the common stumbling blocks for people setting up i.MX audio try to provide some diagnostic information describing the current setup to assisist people in working out what's going on. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-08imx: define functions to configure chip selects in the WEIMUwe Kleine-König
This has the addional effect that the macros CSCR_U, CSCR_L and CSCR_A are not used anymore in mach-pcm038.c and mach-qong.c. These still use the deprecated IO_ADDRESS macro and shouldn't be used in new code. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08imx: properly protect mach/mx{1,[25][157x]}.h from multiple inclusionUwe Kleine-König
Some headers have used (now) wrong names or havn't had protection at all. This is needed before adding static inline functions to the headers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Magnus Lilja <lilja.magnus@gmail.com> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Daniel Mack <daniel@caiaq.de>
2010-01-08imx: remove unneeded include of mach/hardware.hUwe Kleine-König
This include isn't needed and hurts when defining static inline functions in mach/hardware.h (or files included by mach/hardware.h). The reason is that the consumers of mach/uncompress.h are compiled using -Dstatic= so the code for all inline function is included in e.g. arch/arm/boot/compressed/misc.o. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jörg Knobloch <knobloch@incostartec.com> Cc: Alan Carvalho de Assis <acassis@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08imx: remove mx1ads defconfigUwe Kleine-König
For some time now the defconfig for mx1ads produces a kernel for a versatile board. As CONFIG_ARCH_MX1ADS is included in the mx1 defconfig just get rid of mx1ads_defconfig. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de>
2010-01-08imx: only define deprecated symbols conditionallyUwe Kleine-König
Define deprecated symbols in an #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS ... All files that still depend on the old definitions get -DIMX_NEEDS_DEPRECATED_SYMBOLS passed to the compiler. When all remaining users are fixed this allows including the soc specific headers unconditionally. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Eric Benard <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Alan Carvalho de Assis <acassis@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com> Cc: Ilya Yanok <yanok@emcraft.com> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-08imx: mangle addresses after adding the offsetUwe Kleine-König
don't use IO_ADDRESS($base) + $offset but IO_ADDRESS($base + $offset) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Rabin Vincent <rabin@rab.in> Cc: "Agustín Ferrín Pozuelo" <gatoguan-os@yahoo.com> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Daniel Mack <daniel@caiaq.de> Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08mx3/kzm_arm11_01: define and use board specific IO_ADDRESS macroUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk>
2010-01-08imx35: define and use MX35_IO_ADDRESSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jürgen Beisert <j.beisert@pengutronix.de> Cc: Rabin Vincent <rabin@rab.in> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
2010-01-08imx25: redefine MX25_IO_ADDRESS using IMX_IO_ADDRESSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk>
2010-01-08imx31: define and use MX31_IO_ADDRESSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Daniel Mack <daniel@caiaq.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-08imx27: define and use MX27_IO_ADDRESSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rabin Vincent <rabin@rab.in> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
2010-01-08imx21: define and use MX21_IO_ADDRESSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Rabin Vincent <rabin@rab.in> Cc: Agustín Ferrín Pozuelo <gatoguan-os@yahoo.com>
2010-01-08imx: provide helper macro to define IO_ADDRESSUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08imx/mx3: rename files defining a machine to mach-$mach.cUwe Kleine-König
While at it remove some superfluous parenthesis. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Daniel Mack <daniel@caiaq.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
2010-01-05mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 moduleMark Brown
The WM8350 core won't actually use the range yet, but it will in future and the platform data to configure it is there now. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-05mx31ads: Provide a name for EXPIO interrupt chipMark Brown
This makes it a bit more obvious in genirq diagnostics that they aren't handled by the i.MX interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-05mx31ads: Allow enable/disable of switchable suppliesMark Brown
They will be automatically powered off at startup so users will need to enable them for use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-05mx31ads: Allow enable/disable of switchable suppliesMark Brown
They will be automatically powered off at startup so users will need to enable them for use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-05mx31ads: Convert 1133-EV1 to use dev_name to specify consumer devicesMark Brown
This means we don't need to go running round working out struct devices at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-05imx/mx2: rename files defining a machine to mach-$mach.cUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Eric Benard <eric@eukrea.com>
2010-01-05imx: rename Kconfig symbol for "LogicPD MX27 LITEKIT platform"Uwe Kleine-König
Not using MACH_IMX27LITE makes machine_is_imx27lite always return 0 independent of building support for this machine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Daniel Schaeffer <daniel.schaeffer@timesys.com>
2010-01-05imx: rename Kconfig symbol for "Eukrea CPUIMX27 module"Uwe Kleine-König
Not using MACH_CPUIMX27 makes machine_is_cpuimx27 always return 0 independent of building support for this machine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Eric Benard <eric@eukrea.com>
2010-01-05imx/mx1: rename files defining a machine to mach-$mach.cUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-05imx/mx1: add newline at end of MakefileUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-05imx/mx3: rename clock.c and iomux.c to {clock,iomux}-imx31.cUwe Kleine-König
These files are only used on imx31. This makes the name consistent with the imx35 files. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Daniel Mack <daniel@caiaq.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-10 04:27:28 +0000