summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-02-25libceph: eliminate sparse warningsAlex Elder
Eliminate most of the problems in the libceph code that cause sparse to issue warnings. - Convert functions that are never referenced externally to have static scope. - Pass NULL rather than 0 for a pointer argument in one spot in ceph_monc_delete_snapid() This partially resolves: http://tracker.ceph.com/issues/4184 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-25ceph: eliminate sparse warnings in fs codeAlex Elder
Fix the causes for sparse warnings reported in the ceph file system code. Here there are only two (and they're sort of silly but they're easy to fix). This partially resolves: http://tracker.ceph.com/issues/4184 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-25rbd: eliminate sparse warningsAlex Elder
Fengguang Wu reminded me that there were outstanding sparse reports in the ceph and rbd code. This patch fixes these problems in rbd that lead to those reports: - Convert functions that are never referenced externally to have static scope. - Add a lockdep annotation to rbd_request_fn(), because it releases a lock before acquiring it again. This partially resolves: http://tracker.ceph.com/issues/4184 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-25libceph: define connection flag helpersAlex Elder
Define and use functions that encapsulate operations performed on a connection's flags. This resolves: http://tracker.ceph.com/issues/4234 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-25rbd: normalize dout() callsAlex Elder
Add dout() calls to facilitate tracing of image and object requests. Change a few existing calls so they use __func__ rather than the hard-coded function name. Have calls always add ":" after the name of the function, and prefix pointer values with a consistent tag indicating what it represents. (Note that there remain some older dout() calls that are left untouched by this patch.) Issue a warning if rbd_osd_write_callback() ever gets a short write. This resolves: http://tracker.ceph.com/issues/4235 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-25rbd: barriers are hardAlex Elder
Let's go shopping! I'm afraid this may not have gotten it right: 07741308 rbd: add barriers near done flag operations The smp_wmb() should have been done *before* setting the done flag, to ensure all other data was valid before marking the object request done. Switch to use atomic_inc_return() here to set the done flag, which allows us to verify we don't mark something done more than once. Doing this also implies general barriers before and after the call. And although a read memory barrier might have been sufficient before reading the done flag, convert this to a full memory barrier just to put this issue to bed. This resolves: http://tracker.ceph.com/issues/4238 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-25rbd: ignore zero-length requestsAlex Elder
The old request code simply ignored zero-length requests. We should still operate that same way to avoid any changes in behavior. We can implement handling for special zero-length requests separately (see http://tracker.ceph.com/issues/4236). Add some assertions based on this new constraint. This resolves: http://tracker.ceph.com/issues/4237 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-25Merge branch 'kbuild/rc-fixes' into kbuild/kconfigMichal Marek
There is one kconfig fix in the rc-fixes branch that I forgot to submit for 3.8, so let's add it to the kconfig branch for 3.9-rc1.
2013-02-25usbnet: smsc95xx: rename FEATURE_AUTOSUSPENDMing Lei
The name of FEATURE_AUTOSUSPEND is very misleading and the actual meaning is remote wakeup, but a device incapable of remote wakeup still can support USB autosuspend under some situations, so rename it to avoid misunderstanding. Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25usbnet: smsc95xx: fix broken runtime suspendMing Lei
Commit b2d4b150(smsc95xx: enable dynamic autosuspend) implements autosuspend, but breaks current runtime suspend, such as: when the interface becomes down, the usb device can't be put into runtime suspend any more. This patch fixes the broken runtime suspend. Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25usbnet: smsc95xx: fix suspend failureMing Lei
The three below functions: smsc95xx_enter_suspend0() smsc95xx_enter_suspend1() smsc95xx_enter_suspend2() return > 0 in case of success, so they will cause smsc95xx_suspend() to return > 0 and cause suspend failure. The bug is introduced in commit 3b9f7d(smsc95xx: fix error handling in suspend failure case). Cc: <stable@vger.kernel.org> [3.8] Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25bgmac: fix indexing of 2nd level loopsRafał Miłecki
We were using the same variable for iterating two nested loops. Reported-by: Tijs Van Buggenhout <tvb@able.be> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25b43: Fix lockdep splat on module unloadLarry Finger
On unload, b43 produces a lockdep warning that can be summarized in the following way: ====================================================== [ INFO: possible circular locking dependency detected ] 3.8.0-wl+ #117 Not tainted ------------------------------------------------------- modprobe/5557 is trying to acquire lock: ((&wl->firmware_load)){+.+.+.}, at: [<ffffffff81062160>] flush_work+0x0/0x2a0 but task is already holding lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff813bd7d2>] rtnl_lock+0x12/0x20 which lock already depends on the new lock. [ INFO: possible circular locking dependency detected ] ====================================================== The full output is available at http://lkml.indiana.edu/hypermail/linux/kernel/1302.3/00060.html. To summarize, commit 6b6fa58 added a 'cancel_work_sync(&wl->firmware_load)' call in the wrong place. The fix is to move the cancel_work_sync() call to b43_bcma_remove() and b43_ssb_remove(). Thanks to Johannes Berg and Michael Buesch for help in diagnosing the log output. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [V3.5+] Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25Revert "ip_gre: propogate target device GSO capability to the tunnel device"Pravin B Shelar
This reverts commit eb6b9a8cad65e820b145547844b108117cece3a0. Above commit limits GSO capability of gre device to just TSO, but software GRE-GSO is capable of handling all GSO capabilities. This patch also fixes following panic which reverted commit introduced:- BUG: unable to handle kernel NULL pointer dereference at 00000000000000a2 IP: [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre] PGD 42bc19067 PUD 42bca9067 PMD 0 Oops: 0000 [#1] SMP Pid: 2636, comm: ip Tainted: GF 3.8.0+ #83 Dell Inc. PowerEdge R620/0KCKR5 RIP: 0010:[<ffffffffa0680fd1>] [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre] RSP: 0018:ffff88042bfcb708 EFLAGS: 00010246 RAX: 00000000000005b6 RBX: ffff88042d2fa000 RCX: 0000000000000044 RDX: 0000000000000018 RSI: 0000000000000078 RDI: 0000000000000060 RBP: ffff88042bfcb748 R08: 0000000000000018 R09: 000000000000000c R10: 0000000000000020 R11: 000000000101010a R12: ffff88042d2fa800 R13: 0000000000000000 R14: ffff88042d2fa800 R15: ffff88042cd7f650 FS: 00007fa784f55700(0000) GS:ffff88043fd20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a2 CR3: 000000042d8b9000 CR4: 00000000000407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ip (pid: 2636, threadinfo ffff88042bfca000, task ffff88042d142a80) Stack: 0000000100000000 002f000000000000 0a01010100000000 000000000b010101 ffff88042d2fa800 ffff88042d2fa000 ffff88042bfcb858 ffff88042f418c00 ffff88042bfcb798 ffffffffa068199a ffff88042bfcb798 ffff88042d2fa830 Call Trace: [<ffffffffa068199a>] ipgre_newlink+0xca/0x160 [ip_gre] [<ffffffff8143b692>] rtnl_newlink+0x532/0x5f0 [<ffffffff8143b2fc>] ? rtnl_newlink+0x19c/0x5f0 [<ffffffff81438978>] rtnetlink_rcv_msg+0x2c8/0x340 [<ffffffff814386b0>] ? rtnetlink_rcv+0x40/0x40 [<ffffffff814560f9>] netlink_rcv_skb+0xa9/0xd0 [<ffffffff81438695>] rtnetlink_rcv+0x25/0x40 [<ffffffff81455ddc>] netlink_unicast+0x1ac/0x230 [<ffffffff81456a45>] netlink_sendmsg+0x265/0x380 [<ffffffff814138c0>] sock_sendmsg+0xb0/0xe0 [<ffffffff8141141e>] ? move_addr_to_kernel+0x4e/0x90 [<ffffffff81420445>] ? verify_iovec+0x85/0xf0 [<ffffffff81414ffd>] __sys_sendmsg+0x3fd/0x420 [<ffffffff8114b701>] ? handle_mm_fault+0x251/0x3b0 [<ffffffff8114f39f>] ? vma_link+0xcf/0xe0 [<ffffffff81415239>] sys_sendmsg+0x49/0x90 [<ffffffff814ffd19>] system_call_fastpath+0x16/0x1b CC: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25IP_GRE: Fix GRE_CSUM case.Pravin B Shelar
commit "ip_gre: allow CSUM capable devices to handle packets" aa0e51cdda005cd37e2, broke GRE_CSUM case. GRE_CSUM needs checksum computed for inner packet. Therefore csum-calculation can not be offloaded if tunnel device requires GRE_CSUM. Following patch fixes it by computing inner packet checksum for GRE_CSUM type, for all other type of GRE devices csum is offloaded. CC: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25VXLAN: Use tunnel_ip_select_ident() for tunnel IP-Identification.Pravin B Shelar
tunnel_ip_select_ident() is more efficient when generating ip-header id given inner packet is of ipv4 type. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25IP_GRE: Fix IP-Identification.Pravin B Shelar
GRE-GSO generates ip fragments with id 0,2,3,4... for every GSO packet, which is not correct. Following patch fixes it by setting ip-header id unique id of fragments are allowed. As Eric Dumazet suggested it is optimized by using inner ip-header whenever inner packet is ipv4. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25Merge branch 'wireless'David S. Miller
John W. Linville says: ==================== This is a batch of fixes intended for the 3.9 stream... Avinash Patil gives us a mwifiex fix to prevent a system freeze when that driver is unloaded. Daniel Drake brings a patch to avoid dropping the carrier flag across a suspend. This prevents improper packet drops. Wei Yongjun delivers a brcmfmac for a lock leak on an error path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-25ACPI: Overriding ACPI tables via initrd only works with an initrd and on X86Thomas Renninger
Reflect this dependency in Kconfig, to prevent build failures. Shorten the config description as suggested by Borislav Petkov. Finding a suitable memory area to store the modified table(s) has been taken over from arch/x86/kernel/setup.c and makes use of max_low_pfn_mapped: memblock_find_in_range(0, max_low_pfn_mapped,...) This one is X86 specific. It may not be hard to extend this functionality for other ACPI aware architectures if there is need for. For now make this feature only available for X86 to avoid build failures on IA64, compare with: https://bugzilla.kernel.org/show_bug.cgi?id=54091 Signed-off-by: Thomas Renninger <trenn@suse.de> Link: http://lkml.kernel.org/r/1361538742-67599-3-git-send-email-trenn@suse.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-25IB/mlx4: Advertise MW supportShani Michaeli
Indicate memory windows support through device capabilities, kernel verb entries and the relevant uverbs command mask entries. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Support memory window bindingShani Michaeli
* Implement memory windows binding in mlx4_ib_post_send. * Implement mlx4_ib_bind_mw by deferring to mlx4_ib_post_send. * Rename MLX4_WQE_FMR_PERM_* flags to MLX4_WQE_FMR_AND_BIND_PERM_*, indicating that they are used both for fast registration work requests, and for memory window bind work requests. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25mlx4: Implement memory windows allocation and deallocationShani Michaeli
Implement MW allocation and deallocation in mlx4_core and mlx4_ib. Pass down the enable bind flag when registering memory regions. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25mlx4_core: Enable memory windows in {INIT, QUERY}_HCAShani Michaeli
Add memory windows-related code to INIT_HCA and QUERY_HCA. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25mlx4_core: Disable memory windows for virtual functionsShani Michaeli
Do not enable memory windows allocation for virtual functions. In addition, add a few safety checks, such as: * Verifying the PD of a new MPT matches the VF. * Making sure binding memory window isn't enabled for FMRs, and that new memory windows are not FMR themselves. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IPoIB: Free ipoib neigh on path record failure so path rec queries are retriedRoland Dreier
If IPoIB fails to look up a path record (eg if it tries during an SM failover when one SM is dead but the new one hasn't taken over yet), the driver ends up with a neighbour structure but no address handle (AH). There's no mechanism to recover from this: any further packets sent to this destination will be silently dumped in ipoib_start_xmit(). Fix this by freeing the neighbour structures when a path rec query fails, so that the next packet queued to be sent will trigger a new path record query. Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Fail I/O requests if the transport is offlineBart Van Assche
If an SRP target is no longer reachable and srp_reset_host() fails to reconnect then ib_srp will invoke scsi_remove_host(). That function will invoke __scsi_remove_device() for each LUN. And that last function will change the device state from SDEV_TRANSPORT_OFFLINE into SDEV_CANCEL. Certain user space software, e.g. older versions of multipathd, continue queueing I/O to SCSI devices that are in the SDEV_CANCEL state. If these I/O requests are submitted as SG_IO that means that the REQ_PREEMPT flag will be set and hence that these requests will be passed to srp_queuecommand(). These requests will time out. If new requests are queued fast enough from user space these active requests will prevent __scsi_remove_device() to finish. Avoid this by failing I/O requests in the SDEV_CANCEL state if the transport is offline. Introduce a new variable to keep track of the transport state instead of failing requests if (!target->connected || target->qp_in_error), so that the SCSI error handler has a chance to retry commands after a transport layer failure occurred. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Avoid endless SCSI error handling loopBart Van Assche
If a SCSI command times out it is passed to the SCSI error handler. The SCSI error handler will try to abort the commands that timed out. If aborting fails, a device reset will be attempted. If the device reset also fails a host reset will be attempted. If the host reset also fails the whole procedure will be repeated. srp_abort() and srp_reset_device() fail for a QP in the error state. srp_reset_host() fails after host removal has started. Hence if the SCSI error handler gets invoked after host removal has started and with the QP in the error state an endless loop will be triggered. Modify the SCSI error handling functions in ib_srp as follows: - Abort SCSI commands properly even if the QP is in the error state. - Make srp_reset_host() reset SCSI requests even after host removal has already started or if reconnecting fails. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dave@thedillows.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Avoid sending a task management function needlesslyBart Van Assche
Do not send a task management function if sending will fail anyway because either there is no RDMA/RC connection or the QP is in the error state. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dave@thedillows.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Track connection state properlyBart Van Assche
Remove an assignment that incorrectly overwrites the connection state update by srp_connect_target(). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dave@thedillows.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Remove redundant NULL check before kfreeSyam Sidhardhan
kfree on NULL pointer is a no-op. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Fix compiler warning about uninitialized 'vlan' variablePaul Bolle
Building qp.o triggers this gcc warning: drivers/infiniband/hw/mlx4/qp.c: In function ‘mlx4_ib_post_send’: drivers/infiniband/hw/mlx4/qp.c:1862:62: warning: ‘vlan’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/infiniband/hw/mlx4/qp.c:1752:6: note: ‘vlan’ was declared here Looking at the code it is clear 'vlan' is only set and used if 'is_eth' is non-zero. But by initializing 'vlan' to 0xffff, on gcc (Ubuntu 4.7.2-22ubuntu1) 4.7.2 on x86-64 at least, we fix the warning, and the compiler was already setting 'vlan' to 0 in the generated code, so there's no real downside. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> [ Get rid of unnecessary move of 'is_vlan' initialization. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Convert is_xxx variables in build_mlx_header() to boolRoland Dreier
Matches the way they're used, and actually lets at least x86-64 generate better code: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-38 (-38) function old new delta mlx4_ib_post_send 4416 4378 -38 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25[SCSI] ufs: Separate PCI code into glue driverVinayak Holikatti
This patch separates PCI code from ufshcd.c and makes it as a core driver module and adds a new file ufshcd-pci.c as PCI glue driver. [jejb: strip __devinit and devexit_p()] Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Tested-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-25[SCSI] ufs: Segregate PCI Specific CodeVinayak Holikatti
This patch segregates the PCI specific code in ufshcd.c to make it ready for splitting into core ufs driver and PCI glue driver. Also copyright header modification to remove extra warranty disclaim. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Tested-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-26block: fix part_pack_uuid() build errorMimi Zohar
Commit "85865c1 ima: add policy support for file system uuid" introduced a CONFIG_BLOCK dependency. This patch defines a wrapper called blk_part_pack_uuid(), which returns -EINVAL, when CONFIG_BLOCK is not defined. security/integrity/ima/ima_policy.c:538:4: error: implicit declaration of function 'part_pack_uuid' [-Werror=implicit-function-declaration] Changelog v2: - Reference commit number in patch description Changelog v1: - rename ima_part_pack_uuid() to blk_part_pack_uuid() - resolve scripts/checkpatch.pl warnings Changelog v0: - fix UUID scripts/Lindent msgs Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: David Rientjes <rientjes@google.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-02-25ARM: fix scheduling while atomic warning in alignment handling codeRussell King
Paolo Pisati reports that IPv6 triggers this warning: BUG: scheduling while atomic: swapper/0/0/0x40000100 Modules linked in: [<c001b1c4>] (unwind_backtrace+0x0/0xf0) from [<c0503c5c>] (__schedule_bug+0x48/0x5c) [<c0503c5c>] (__schedule_bug+0x48/0x5c) from [<c0508608>] (__schedule+0x700/0x740) [<c0508608>] (__schedule+0x700/0x740) from [<c007007c>] (__cond_resched+0x24/0x34) [<c007007c>] (__cond_resched+0x24/0x34) from [<c05086dc>] (_cond_resched+0x3c/0x44) [<c05086dc>] (_cond_resched+0x3c/0x44) from [<c0021f6c>] (do_alignment+0x178/0x78c) [<c0021f6c>] (do_alignment+0x178/0x78c) from [<c00083e0>] (do_DataAbort+0x34/0x98) [<c00083e0>] (do_DataAbort+0x34/0x98) from [<c0509a60>] (__dabt_svc+0x40/0x60) Exception stack(0xc0763d70 to 0xc0763db8) 3d60: e97e805e e97e806e 2c000000 11000000 3d80: ea86bb00 0000002c 00000011 e97e807e c076d2a8 e97e805e e97e806e 0000002c 3da0: 3d000000 c0763dbc c04b98fc c02a8490 00000113 ffffffff [<c0509a60>] (__dabt_svc+0x40/0x60) from [<c02a8490>] (__csum_ipv6_magic+0x8/0xc8) Fix this by using probe_kernel_address() stead of __get_user(). Cc: <stable@vger.kernel.org> Reported-by: Paolo Pisati <p.pisati@gmail.com> Tested-by: Paolo Pisati <p.pisati@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-25ARM: VFP: fix emulation of second VFP instructionRussell King
Martin Storsjö reports that the sequence: ee312ac1 vsub.f32 s4, s3, s2 ee702ac0 vsub.f32 s5, s1, s0 e59f0028 ldr r0, [pc, #40] ee111a90 vmov r1, s3 on Raspberry Pi (implementor 41 architecture 1 part 20 variant b rev 5) where s3 is a denormal and s2 is zero results in incorrect behaviour - the instruction "vsub.f32 s5, s1, s0" is not executed: VFP: bounce: trigger ee111a90 fpexc d0000780 VFP: emulate: INST=0xee312ac1 SCR=0x00000000 ... As we can see, the instruction triggering the exception is the "vmov" instruction, and we emulate the "vsub.f32 s4, s3, s2" but fail to properly take account of the FPEXC_FP2V flag in FPEXC. This is because the test for the second instruction register being valid is bogus, and will always skip emulation of the second instruction. Cc: <stable@vger.kernel.org> Reported-by: Martin Storsjö <martin@martin.st> Tested-by: Martin Storsjö <martin@martin.st> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-26ima: "remove enforce checking duplication" merge fixMimi Zohar
Commit "750943a ima: remove enforce checking duplication" combined the 'in IMA policy' and 'enforcing file integrity' checks. For the non-file, kernel module verification, a specific check for 'enforcing file integrity' was not added. This patch adds the check. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-02-25kbuild: Fix reading of .config in link-vmlinux.shMichal Marek
The shell '.' command is not required to search the current directory as a fallback and in fact newer versions of bash in sh-mode do not do this. Force reading the file from the current directory if $KCONFIG_CONFIG contains no '/'. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-02-25ARM: DMA-mapping: fix memory leak in IOMMU dma-mapping implementationMarek Szyprowski
This patch removes page_address() usage in IOMMU-aware dma-mapping implementation and replaced it with direct use of the cpu virtual address provided by the caller. page_address() returned incorrect address for pages remapped in atomic pool, what caused memory leak. Reported-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Hiroshi Doyu <hdoyu@nvidia.com>
2013-02-25ARM: dma-mapping: Add maximum alignment order for dma iommu buffersSeung-Woo Kim
Alignment order for a dma iommu buffer is set by buffer size. For large buffer, it is a waste of iommu address space. So configurable parameter to limit maximum alignment order can reduce the waste. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: dma-mapping: use himem for DMA buffers for IOMMU-mapped devicesMarek Szyprowski
IOMMU can provide access to any memory page, so there is no point in limiting the allocated pages only to lowmem, once other parts of dma-mapping subsystem correctly supports himem pages. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: dma-mapping: add support for CMA regions placed in highmem zoneMarek Szyprowski
This patch adds missing pieces to correctly support memory pages served from CMA regions placed in high memory zones. Please note that the default global CMA area is still put into lowmem and is limited by optional architecture specific DMA zone. One can however put device specific CMA regions in high memory zone to reduce lowmem usage. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com>
2013-02-25arm: dma mapping: export arm iommu functionsPrathyush K
This patch adds EXPORT_SYMBOL_GPL calls to the three arm iommu functions - arm_iommu_create_mapping, arm_iommu_free_mapping and arm_iommu_attach_device. These three functions are arm specific wrapper functions for creating/freeing/using an iommu mapping and they are called by various drivers. If any of these drivers need to be built as dynamic modules, these functions need to be exported. Changelog v2: using EXPORT_SYMBOL_GPL as suggested by Marek. Signed-off-by: Prathyush K <prathyush.k@samsung.com> [m.szyprowski: extended with recently introduced EXPORT_SYMBOL_GPL(arm_iommu_detach_device)] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: dma-mapping: Add arm_iommu_detach_device()Hiroshi Doyu
A counter part of arm_iommu_attach_device(). Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: dma-mapping: Add macro to_dma_iommu_mapping()Hiroshi Doyu
This can be built without CONFIG_ARM_DMA_USE_IOMMU. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: dma-mapping: Set arm_dma_set_mask() for iommu->set_dma_mask()Hiroshi Doyu
struct dma_map_ops iommu_ops doesn't have ->set_dma_mask, which causes crash when dma_set_mask() is called from some driver. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: iommu: Include linux/kref.h in asm/dma-iommu.hLaurent Pinchart
The dma_iommu_mapping structure defined in asm/dma-iommu.h embeds a struct kref, include the appropriate header file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25fix compat truncate/ftruncateAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 02:03:25 +0000