summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-03-26ARM: OMAP: clocks: Delay clk inits atleast until slab is initializedRajendra Nayak
clk inits on OMAP happen quite early, even before slab is available. The dependency comes from the fact that the timer init code starts to use clocks and hwmod and we need clocks to be initialized by then. There are various problems doing clk inits this early, one is, not being able to do dynamic clk registrations and hence the dependency on clk-private.h. The other is, inability to debug early kernel crashes without enabling DEBUG_LL and earlyprintk. Doing early clk init also exposed another instance of a kernel panic due to a BUG() when CONFIG_DEBUG_SLAB is enabled. [ 0.000000] Kernel BUG at c01174f8 [verbose debug info unavailable] [ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-12179-g72d48f9 #6) [ 0.000000] PC is at __kmalloc+0x1d4/0x248 [ 0.000000] LR is at __clk_init+0x2e0/0x364 [ 0.000000] pc : [<c01174f8>] lr : [<c0441f54>] psr: 600001d3 [ 0.000000] sp : c076ff28 ip : c065cefc fp : c0441f54 [ 0.000000] r10: 0000001c r9 : 000080d0 r8 : c076ffd4 [ 0.000000] r7 : c074b578 r6 : c0794d88 r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : c07cac70 r1 : 000080d0 r0 : 0000001c [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7d Table: 8000404a DAC: 00000017 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc076e240) [ 0.000000] Stack: (0xc076ff28 to 0xc0770000) [ 0.000000] ff20: 22222222 c0794ec8 c06546e8 00000000 00000040 c0794d88 [ 0.000000] ff40: c074b578 c076ffd4 c07951c8 c076e000 00000000 c0441f54 c074b578 c076ffd4 [ 0.000000] ff60: c0793828 00000040 c0794d88 c074b578 c076ffd4 c0776900 c076e000 c07272ac [ 0.000000] ff80: 2f800000 c074c968 c07f93d0 c0719780 c076ffa0 c076ff98 00000000 00000000 [ 0.000000] ffa0: 00000000 00000000 00000000 00000001 c074cd6c c077b1ec 8000406a c0715724 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c074c968 10c53c7d c0776974 [ 0.000000] ffe0: c074cd6c c077b1ec 8000406a 411fc092 00000000 80008074 00000000 00000000 [ 0.000000] [<c01174f8>] (__kmalloc+0x1d4/0x248) from [<c0441f54>] (__clk_init+0x2e0/0x364) [ 0.000000] [<c0441f54>] (__clk_init+0x2e0/0x364) from [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) [ 0.000000] [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) from [<c0719780>] (setup_arch+0x15c/0x284) [ 0.000000] [<c0719780>] (setup_arch+0x15c/0x284) from [<c0715724>] (start_kernel+0x7c/0x334) [ 0.000000] [<c0715724>] (start_kernel+0x7c/0x334) from [<80008074>] (0x80008074) [ 0.000000] Code: e5883004 e1a00006 e28dd00c e8bd8ff0 (e7f001f2) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! It was a know issue, that slab allocations would fail when common clock core tries to cache parent pointers for mux clocks on OMAP, and hence a patch 'clk: Allow late cache allocation for clk->parents, commit 7975059d' was added to work this problem around. A BUG() within kmalloc() with CONFIG_DEBUG_SLAB enabled was completely overlooked causing this regression. More details on the issue reported can be found here, http://www.mail-archive.com/linux-omap@vger.kernel.org/msg85932.html With all these issues around clk inits happening way too early, it makes sense to at least move them to a point where dynamic memory allocations are possible. So move them to a point just before the timer code starts using clocks and hwmod. This should at least pave way for clk inits on OMAP moving to dynamic clock registrations instead of using the static macros defined in clk-private.h. The issue with kernel panic while CONFIG_DEBUG_SLAB is enabled was reported by Piotr Haber and Tony Lindgren and this patch fixes the reported issue as well. Reported-by: Piotr Haber <phaber@broadcom.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org # v3.8 Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "stable fodder; assorted deadlock fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vt: synchronize_rcu() under spinlock is not nice... Nest rename_lock inside vfsmount_lock Don't bother with redoing rw_verify_area() from default_file_splice_from()
2013-03-26vt: synchronize_rcu() under spinlock is not nice...Al Viro
vcs_poll_data_free() calls unregister_vt_notifier(), which calls atomic_notifier_chain_unregister(), which calls synchronize_rcu(). Do it *after* we'd dropped ->f_lock. Cc: stable@vger.kernel.org (all kernels since 2.6.37) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-26PCI: Add PCI ROM helper for platform-provided ROM imagesMatthew Garrett
It turns out that some UEFI systems provide apparently an apparently valid PCI ROM BAR that turns out to contain garbage, so the attempt in 547b52463 to prefer the ROM from the BAR actually breaks a different set of machines. As Linus pointed out, the graphics drivers are probably in the best position to make this judgement, so this basically reverts 547b52463 and f9a37be0f and adds a new helper function. Followup patches will add support to nouveau and radeon for probing this ROM source if they can't find a ROM from some other source. [bhelgaas: added reporter and bugzilla pointers, s/f4eb5ff05/547b52463] Reference: https://bugzilla.redhat.com/show_bug.cgi?id=927451 Reference: http://lkml.kernel.org/r/kg69ef$vdb$1@ger.gmane.org Reported-by: Mantas Mikulėnas <grawity@gmail.com> Reported-by: Chris Murphy <bugzilla@colorremedies.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-03-27PCI / ACPI: hold acpi_scan_lock during root bus hotplugYinghai Lu
During merging the PCI tree with the PM/ACPI tree, Linus noticed that we don't use the same lock using patten about ACPI PCI root as acpiphp. Here apply the same locking patten, and we need to execute acpi_bus_hot_remove_device() via acpi_os_hotplug_execute() as it also holds acpi_scan_lock. [rjw: Changelog] Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> No-objection-from: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-27ACPI / APEI: fix error status check condition for CPERChen Gong
In Table 18-289, ACPI5.0 SPEC, the error data length in CPER Generic Error Data Entry can be 0, which means this generic error data entry can have only one header. So fix the check conditon for it. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Reviewed-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-27ACPI / PM: fix suspend and resume on Sony Vaio VGN-FW21MFabio Valentini
Add Sony Vaio VGN-FW21M to the device blacklist in drivers/acpi/sleep.c. Fixes suspend/resume on this device (device no longer reboots instead of resuming). References: https://bugzilla.kernel.org/show_bug.cgi?id=55001 Signed-off-by: Fabio Valentini <fafatheone@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-26Nest rename_lock inside vfsmount_lockAl Viro
... lest we get livelocks between path_is_under() and d_path() and friends. The thing is, wrt fairness lglocks are more similar to rwsems than to rwlocks; it is possible to have thread B spin on attempt to take lock shared while thread A is already holding it shared, if B is on lower-numbered CPU than A and there's a thread C spinning on attempt to take the same lock exclusive. As the result, we need consistent ordering between vfsmount_lock (lglock) and rename_lock (seq_lock), even though everything that takes both is going to take vfsmount_lock only shared. Spotted-by: Brad Spengler <spender@grsecurity.net> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-26drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2)Adam Jackson
commit f40ebd6bcbbd0d30591f42dc16be52b5086a366b Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Date: Tue Mar 5 14:24:48 2013 +0100 drm/i915: Turn off hsync and vsync on ADPA when disabling crt properly disabled the hsync/vsync logic at disable time, but neglected to re-enable them at enable time. v2: In the enable hook, restore the connector's expected DPMS level instead of forcing ON. Do this by stashing a back pointer to the connector in the crt (suggested by danvet) since otherwise it's awkward to look up. Signed-off-by: Adam Jackson <ajax@redhat.com> Cc: stable@vger.kernel.org [danvet: Added more verbose commit citation and cc: stable tag. Also, make it compile. Then self-lart and try to assign the right pointer.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Always increment IPV4 ID field in encapsulated GSO packets, even when DF is set. Regression fix from Pravin B Shelar. 2) Fix per-net subsystem initialization in netfilter conntrack, otherwise we may access dynamically allocated memory before it is actually allocated. From Gao Feng. 3) Fix DMA buffer lengths in iwl3945 driver, from Stanislaw Gruszka. 4) Fix race between submission of sync vs async commands in mwifiex driver, from Amitkumar Karwar. 5) Add missing cancel of command timer in mwifiex driver, from Bing Zhao. 6) Missing SKB free in rtlwifi USB driver, from Jussi Kivilinna. 7) Thermal layer tries to use a genetlink multicast string that is longer than the 16 character limit. Fix it and add a BUG check to prevent this kind of thing from happening in the future. From Masatake YAMATO. 8) Fix many bugs in the handling of the teardown of L2TP connections, UDP encapsulation instances, and sockets. From Tom Parkin. 9) Missing socket release in IRDA, from Kees Cook. 10) Fix fec driver modular build, from Fabio Estevam. 11) Erroneous use of kfree() instead of free_netdev() in lantiq_etop, from Wei Yongjun. 12) Fix bugs in handling of queue numbers and steering rules in mlx4 driver, from Moshe Lazer, Hadar Hen Zion, and Or Gerlitz. 13) Some FOO_DIAG_MAX constants were defined off by one, fix from Andrey Vagin. 14) TCP segmentation deferral is unintentionally done too strongly, breaking ACK clocking. Fix from Eric Dumazet. 15) net_enable_timestamp() can legitimately be invoked from software interrupts, and in a way that is safe, so remove the WARN_ON(). Also from Eric Dumazet. 16) Fix use after free in VLANs, from Cong Wang. 17) Fix TCP slow start retransmit storms after SACK reneging, from Yuchung Cheng. 18) Unix socket release should mark a socket dead before NULL'ing out sock->sk, otherwise we can race. Fix from Paul Moore. 19) IPV6 addrconf code can try to free static memory, from Hong Zhiguo. 20) Fix register mis-programming, NULL pointer derefs, and wrong PHC clock frequency in IGB driver. From Lior LevyAlex Williamson, Jiri Benc, and Jeff Kirsher. 21) skb->ip_summed logic in pch_gbe driver is reversed, breaking packet forwarding. Fix from Veaceslav Falico. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) ipv4: Fix ip-header identification for gso packets. bonding: remove already created master sysfs link on failure af_unix: dont send SCM_CREDENTIAL when dest socket is NULL pch_gbe: fix ip_summed checksum reporting on rx igb: fix PHC stopping on max freq igb: make sensor info static igb: SR-IOV init reordering igb: Fix null pointer dereference igb: fix i350 anti spoofing config ixgbevf: don't release the soft entries ipv6: fix bad free of addrconf_init_net unix: fix a race condition in unix_release() tcp: undo spurious timeout after SACK reneging bnx2x: fix assignment of signed expression to unsigned variable bridge: fix crash when set mac address of br interface 8021q: fix a potential use-after-free net: remove a WARN_ON() in net_enable_timestamp() tcp: preserve ACK clocking in TSO net: fix *_DIAG_MAX constants net/mlx4_core: Disallow releasing VF QPs which have steering rules ...
2013-03-26Merge tag 'nfs-for-3.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Fix an NFSv4 idmapper regression - Fix an Oops in the pNFS blocks client - Fix up various issues with pNFS layoutcommit - Ensure correct read ordering of variables in rpc_wake_up_task_queue_locked * tag 'nfs-for-3.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked NFSv4.1: Add a helper pnfs_commit_and_return_layout NFSv4.1: Always clear the NFS_INO_LAYOUTCOMMIT in layoutreturn NFSv4.1: Fix a race in pNFS layoutcommit pnfs-block: removing DM device maybe cause oops when call dev_remove NFSv4: Fix the string length returned by the idmapper
2013-03-26Merge tag 'for-usb-linus-2013-03-26' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus Misc xHCI fixes for 3.9 Hi Greg, Here's a couple of fixes for the xHCI driver. Three patches are nothing major: build warning fix, macro field width fix, and removing some unnecessary log spam. The only interesting thing here is Tianyu's two patches to fix the USB port connection type discovery, for the USB port power off mechanism. This adds new USB host API, but as discussed, it's necessary to avoid powering off the wrong USB port. It's not marked for backport to stable kernels, since the sysfs mechanism to manually power off a port didn't go in until 3.9. I've smoke tested these, including system suspend, USB device suspend, and rocking out in my cube with a pair of USB headphones. They look fine to me. Hibernate is currently broken on my system, due to some nouveau MMIO read faults. I'll report that separately. Sarah Sharp
2013-03-26rsxx: remove unused variablePhilip J Kelleher
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-03-26rsxx: enable error return of rsxx_eeh_save_issued_dmas()Philip J Kelleher
Commit d8d595df introduced a bug where we did not check for a NULL return from kmalloc(). Make rsxx_eeh_save_issued_dmas() return an error for that case, and make the callers handle that. Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-03-26hrtimer: Don't reinitialize a cpu_base lock on CPU_UPMichael Bohan
The current code makes the assumption that a cpu_base lock won't be held if the CPU corresponding to that cpu_base is offline, which isn't always true. If a hrtimer is not queued, then it will not be migrated by migrate_hrtimers() when a CPU is offlined. Therefore, the hrtimer's cpu_base may still point to a CPU which has subsequently gone offline if the timer wasn't enqueued at the time the CPU went down. Normally this wouldn't be a problem, but a cpu_base's lock is blindly reinitialized each time a CPU is brought up. If a CPU is brought online during the period that another thread is performing a hrtimer operation on a stale hrtimer, then the lock will be reinitialized under its feet, and a SPIN_BUG() like the following will be observed: <0>[ 28.082085] BUG: spinlock already unlocked on CPU#0, swapper/0/0 <0>[ 28.087078] lock: 0xc4780b40, value 0x0 .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 <4>[ 42.451150] [<c0014398>] (unwind_backtrace+0x0/0x120) from [<c0269220>] (do_raw_spin_unlock+0x44/0xdc) <4>[ 42.460430] [<c0269220>] (do_raw_spin_unlock+0x44/0xdc) from [<c071b5bc>] (_raw_spin_unlock+0x8/0x30) <4>[ 42.469632] [<c071b5bc>] (_raw_spin_unlock+0x8/0x30) from [<c00a9ce0>] (__hrtimer_start_range_ns+0x1e4/0x4f8) <4>[ 42.479521] [<c00a9ce0>] (__hrtimer_start_range_ns+0x1e4/0x4f8) from [<c00aa014>] (hrtimer_start+0x20/0x28) <4>[ 42.489247] [<c00aa014>] (hrtimer_start+0x20/0x28) from [<c00e6190>] (rcu_idle_enter_common+0x1ac/0x320) <4>[ 42.498709] [<c00e6190>] (rcu_idle_enter_common+0x1ac/0x320) from [<c00e6440>] (rcu_idle_enter+0xa0/0xb8) <4>[ 42.508259] [<c00e6440>] (rcu_idle_enter+0xa0/0xb8) from [<c000f268>] (cpu_idle+0x24/0xf0) <4>[ 42.516503] [<c000f268>] (cpu_idle+0x24/0xf0) from [<c06ed3c0>] (rest_init+0x88/0xa0) <4>[ 42.524319] [<c06ed3c0>] (rest_init+0x88/0xa0) from [<c0c00978>] (start_kernel+0x3d0/0x434) As an example, this particular crash occurred when hrtimer_start() was executed on CPU #0. The code locked the hrtimer's current cpu_base corresponding to CPU #1. CPU #0 then tried to switch the hrtimer's cpu_base to an optimal CPU which was online. In this case, it selected the cpu_base corresponding to CPU #3. Before it could proceed, CPU #1 came online and reinitialized the spinlock corresponding to its cpu_base. Thus now CPU #0 held a lock which was reinitialized. When CPU #0 finally ended up unlocking the old cpu_base corresponding to CPU #1 so that it could switch to CPU #3, we hit this SPIN_BUG() above while in switch_hrtimer_base(). CPU #0 CPU #1 ---- ---- ... <offline> hrtimer_start() lock_hrtimer_base(base #1) ... init_hrtimers_cpu() switch_hrtimer_base() ... ... raw_spin_lock_init(&cpu_base->lock) raw_spin_unlock(&cpu_base->lock) ... <spin_bug> Solve this by statically initializing the lock. Signed-off-by: Michael Bohan <mbohan@codeaurora.org> Link: http://lkml.kernel.org/r/1363745965-23475-1-git-send-email-mbohan@codeaurora.org Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-03-26nfsd4: reject "negative" acl lengthsJ. Bruce Fields
Since we only enforce an upper bound, not a lower bound, a "negative" length can get through here. The symptom seen was a warning when we attempt to a kmalloc with an excessive size. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Cc: stable@kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-26yama: Better permission check for ptracemeEric W. Biederman
Change the permission check for yama_ptrace_ptracee to the standard ptrace permission check, testing if the traceer has CAP_SYS_PTRACE in the tracees user namespace. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-26irqchip: gic: fix irq_trigger returnAbhijeet Dharmapurikar
The genirq layer expects a 0 in case that the retrigger function is not able to resend the irq in hardware, but the code is returning -ENXIO. Fix it. [ tglx: Reworked comment and changelog ] Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1363734349-32635-1-git-send-email-sboyd@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-03-26ipv4: Fix ip-header identification for gso packets.Pravin B Shelar
ip-header id needs to be incremented even if IP_DF flag is set. This behaviour was changed in commit 490ab08127cebc25e3a26 (IP_GRE: Fix IP-Identification). Following patch fixes it so that identification is always incremented. Reported-by: Cong Wang <amwang@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26vfio-pci: Fix possible integer overflowAlex Williamson
The VFIO_DEVICE_SET_IRQS ioctl takes a start and count parameter, both of which are unsigned. We attempt to bounds check these, but fail to account for the case where start is a very large number, allowing start + count to wrap back into the valid range. Bounds check both start and start + count. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-03-26Btrfs: fix race between mmap writes and compressionChris Mason
Btrfs uses page_mkwrite to ensure stable pages during crc calculations and mmap workloads. We call clear_page_dirty_for_io before we do any crcs, and this forces any application with the file mapped to wait for the crc to finish before it is allowed to change the file. With compression on, the clear_page_dirty_for_io step is happening after we've compressed the pages. This means the applications might be changing the pages while we are compressing them, and some of those modifications might not hit the disk. This commit adds the clear_page_dirty_for_io before compression starts and makes sure to redirty the page if we have to fallback to uncompressed IO as well. Signed-off-by: Chris Mason <chris.mason@fusionio.com> Reported-by: Alexandre Oliva <oliva@gnu.org> cc: stable@vger.kernel.org
2013-03-26bonding: remove already created master sysfs link on failureVeaceslav Falico
If slave sysfs symlink failes to be created - we end up without removing the master sysfs symlink. Remove it in case of failure. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26af_unix: dont send SCM_CREDENTIAL when dest socket is NULLdingtianhong
SCM_SCREDENTIALS should apply to write() syscalls only either source or destination socket asserted SOCK_PASSCRED. The original implememtation in maybe_add_creds is wrong, and breaks several LSB testcases ( i.e. /tset/LSB.os/netowkr/recvfrom/T.recvfrom). Origionally-authored-by: Karel Srot <ksrot@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26USB: serial: fix hang when opening portMing Lei
Johan's 'fix use-after-free in TIOCMIWAIT' patchset[1] introduces one bug which can cause kernel hang when opening port. This patch initialized the 'port->delta_msr_wait' waitqueue head to fix the bug which is introduced in 3.9-rc4. [1], http://marc.info/?l=linux-usb&m=136368139627876&w=2 Cc: stable <stable@vger.kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net Jeff Kirsher says: ==================== This series contains updates to ixgbevf and igb. The ixgbevf calls to pci_disable_msix() and to free the msix_entries memory should not occur if device open fails. Instead they should be called during device driver removal to balance with the call to pci_enable_msix() and the call to allocate msix_entries memory during the device probe and driver load. The remaining 4 of 5 igb patches are simple 1-3 line patches to fix several issues such as possible null pointer dereference, PHC stopping on max frequency, make sensor info static and SR-IOV initialization reordering. The remaining igb patch to fix anti-spoofing config fixes a problem in i350 where anti spoofing configuration was written into a wrong register. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26pch_gbe: fix ip_summed checksum reporting on rxVeaceslav Falico
skb->ip_summed should be CHECKSUM_UNNECESSARY when the driver reports that checksums were correct and CHECKSUM_NONE in any other case. They're currently placed vice versa, which breaks the forwarding scenario. Fix it by placing them as described above. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26x86, io_apic: remove duplicated include from irq_remapping.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-03-26ASoC: core: Fix to check return value of snd_soc_update_bits_locked()Joonyoung Shim
It can be 0 or 1 return value of snd_soc_update_bits_locked() when it is success. So just check return value is negative. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-03-26Merge remote-tracking branch 'asoc/fix/spear' into asoc-nextMark Brown
2013-03-26Merge remote-tracking branch 'asoc/fix/si476x' into asoc-nextMark Brown
2013-03-26Merge remote-tracking branch 'asoc/fix/sh' into asoc-nextMark Brown
2013-03-26Merge remote-tracking branch 'asoc/fix/max98090' into asoc-nextMark Brown
2013-03-26Merge remote-tracking branch 'asoc/fix/fsl' into asoc-nextMark Brown
2013-03-26Merge remote-tracking branch 'asoc/fix/dapm' into asoc-nextMark Brown
2013-03-26Merge remote-tracking branch 'asoc/fix/core' into asoc-nextMark Brown
2013-03-26Merge remote-tracking branch 'asoc/fix/adsp' into asoc-nextMark Brown
2013-03-26NFC: llcp: Keep the connected socket parent pointer aliveSamuel Ortiz
And avoid decreasing the ack log twice when dequeueing connected LLCP sockets. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-26ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_killShawn Guo
There is a sync issue with hotplug operation. It's possible that when imx_cpu_kill gets running on primary core, the imx_cpu_die execution on the core which is to be killed hasn't been finished yet. The problem will very likely be hit when running suspend without no_console_suspend setting on kernel cmdline. It uses cpu jumping argument register to sync imx_cpu_die and imx_cpu_kill. The register will be set in imx_cpu_die and imx_cpu_kill will wait for the register being cleared to actually kill the cpu. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: <stable@vger.kernel.org>
2013-03-26[media] [REGRESSION] bt8xx: Fix too large height in cropcapHans de Goede
Since commit a1fd287780c8e91fed4957b30c757b0c93021162: "[media] bttv-driver: fix two warnings" cropcap.defrect.height and cropcap.bounds.height for the PAL entry are 32 resp 30 pixels too large, if a userspace app (ie xawtv) actually tries to use the full advertised height, the resulting image is broken in ways only a screenshot can describe. The cause of this is the fix for this warning: drivers/media/pci/bt8xx/bttv-driver.c:308:3: warning: initialized field overwritten [-Woverride-init] In this chunk of the commit: @@ -301,11 +301,10 @@ const struct bttv_tvnorm bttv_tvnorms[] = { /* totalwidth */ 1135, /* sqwidth */ 944, /* vdelay */ 0x20, - /* sheight */ 576, - /* videostart0 */ 23) /* bt878 (and bt848?) can capture another line below active video. */ - .cropcap.bounds.height = (576 + 2) + 0x20 - 2, + /* sheight */ (576 + 2) + 0x20 - 2, + /* videostart0 */ 23) },{ .v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR, .name = "NTSC", Which replaces the overriding of cropcap.bounds.height initialization outside of the CROPCAP macro (which also initializes it), with passing a different sheight value to the CROPCAP macro. There are 2 problems with this warning fix: 1) The sheight value is used twice in the CROPCAP macro, and the old code only changed one resulting value. 2) The old code increased the .cropcap.bounds.height value (and did not touch the .cropcap.defrect.height value at all) by 2, where as the fixed code increases it by 32, as the fixed code passes (576 + 2) + 0x20 - 2 to the CROPCAP macro, but the + 0x20 - 2 is already done by the macro so now is done twice for .cropcap.bounds.height, and also is applied to .cropcap.defrect.height where it should not be applied at all. This patch fixes this by adding an extraheight parameter to the CROPCAP entry and using it for the PAL entry. Cc: stable@kernel.org # For Kernel 3.8 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-26pid: Handle the exit of a multi-threaded init.Eric W. Biederman
When a multi-threaded init exits and the initial thread is not the last thread to exit the initial thread hangs around as a zombie until the last thread exits. In that case zap_pid_ns_processes needs to wait until there are only 2 hashed pids in the pid namespace not one. v2. Replace thread_pid_vnr(me) == 1 with the test thread_group_leader(me) as suggested by Oleg. Cc: stable@vger.kernel.org Cc: Oleg Nesterov <oleg@redhat.com> Reported-by: Caj Larsson <caj@omnicloud.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-26igb: fix PHC stopping on max freqJiri Benc
For 82576 MAC type, max_adj is reported as 1000000000 ppb. However, if this value is passed to igb_ptp_adjfreq_82576, incvalue overflows out of INCVALUE_82576_MASK, resulting in setting of zero TIMINCA.incvalue, stopping the PHC (instead of going at twice the nominal speed). Fix the advertised max_adj value to the largest value hardware can handle. As there is no min_adj value available (-max_adj is used instead), this will also prevent stopping the clock intentionally. It's probably not a big deal, other igb MAC types don't support stopping the clock, either. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-26igb: make sensor info staticStephen Hemminger
Trivial sparse warning. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-26igb: SR-IOV init reorderingAlex Williamson
igb is ineffective at setting a lower total VFs because: int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) { ... /* Shouldn't change if VFs already enabled */ if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE) return -EBUSY; Swap init ordering. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-26igb: Fix null pointer dereferenceAlex Williamson
The max_vfs= option has always been self limiting to the number of VFs supported by the device. fa44f2f1 added SR-IOV configuration via sysfs, but in the process broke this self correction factor. The failing path is: igb_probe igb_sw_init if (max_vfs > 7) { adapter->vfs_allocated_count = 7; ... igb_probe_vfs igb_enable_sriov(, max_vfs) if (num_vfs > 7) { err = -EPERM; ... This leaves vfs_allocated_count = 7 and vf_data = NULL, so we bomb out when igb_probe finally calls igb_reset. It seems like a really bad idea, and somewhat pointless, to set vfs_allocated_count separate from vf_data, but limiting max_vfs is enough to avoid the null pointer. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-26ARM: modules: don't export cpu_set_pte_ext when !MMUWill Deacon
cpu_set_pte_ext is only guaranteed to be defined when CONFIG_MMU, so don't export it to modules otherwise. Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-03-26ARM: mm: remove broken condition check for v4 flushingWill Deacon
There's no point having a conditional cache flush if we don't know the state of the condition beforehand. This patch makes the cacheflush in v4_flush_user_cache_range unconditional. signed-off-by: will deacon <will.deacon@arm.com>
2013-03-26ARM: mm: fix numerous hideous errors in proc-arm740.SWill Deacon
The setup code in proc-arm740.S is completely broken and, as far as I can tell, always has been. I was >this< close to ripping it out, when a 740t core-tile materialised in the office, so I've had a crack at fixing things up: - Fix the ram/flash area calculations so that we actually set the condition flags before testing them... - Fix the proc_info structure so that __cpu_io_mmu_flags are defined as 0, placing the __cpu_flush pointer at the correct offset - Re-number the registers used during __arm740_setup so that we don't clobber the machine ID et al - Advertise Thumb support via the hwcaps, since 740T is the only 740 implementation. Acked-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-03-26ARM: cache: remove ARMv3 support codeWill Deacon
This is only used by 740t, which is a v4 core and (by my reading of the datasheet for the CPU) ignores CRm for the cp15 cache flush operation, making the v4 cache implementation in cache-v4.S sufficient for this CPU. Tested with 740T core-tile on Integrator/AP baseboard. Acked-by: Hyok S. Choi <hyok.choi@samsung.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-03-26igb: fix i350 anti spoofing configLior Levy
Fix a problem in i350 where anti spoofing configuration was written into a wrong register. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-26ixgbevf: don't release the soft entriesxunleer
When the ixgbevf driver is opened the request to allocate MSIX irq vectors may fail. In that case the driver will call ixgbevf_down() which will call ixgbevf_irq_disable() to clear the HW interrupt registers and calls synchronize_irq() using the msix_entries pointer in the adapter structure. However, when the function to request the MSIX irq vectors failed it had already freed the msix_entries which causes an OOPs from using the NULL pointer in synchronize_irq(). The calls to pci_disable_msix() and to free the msix_entries memory should not occur if device open fails. Instead they should be called during device driver removal to balance with the call to pci_enable_msix() and the call to allocate msix_entries memory during the device probe and driver load. Signed-off-by: Li Xun <xunleer.li@huawei.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>