summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-07-25wireless: reg: restore previous behaviour of chan->max_power calculationsStanislaw Gruszka
commit eccc068e8e84c8fe997115629925e0422a98e4de Author: Hong Wu <Hong.Wu@dspg.com> Date: Wed Jan 11 20:33:39 2012 +0200 wireless: Save original maximum regulatory transmission power for the calucation of the local maximum transmit pow changed the way we calculate chan->max_power as min(chan->max_power, chan->max_reg_power). That broke rt2x00 (and perhaps some other drivers) that do not set chan->max_power. It is not so easy to fix this problem correctly in rt2x00. According to commit eccc068e8 changelog, change claim only to save maximum regulatory power - changing setting of chan->max_power was side effect. This patch restore previous calculations of chan->max_power and do not touch chan->max_reg_power. Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-24mac80211: fix scan_sdata assignmentJohannes Berg
We need to use RCU to assign scan_sdata. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12NFC: NCI module license 'unspecified' taints kernelDave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-12NFC: Set target nfcid1 for all HCI reader A targetsEric Lapuyade
Without the discovered target nfcid1 and its length set properly, type 2 tags detection fails with the pn544 as it checks for them from pn544_hci_complete_target_discovered(). Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Reported-by: Mathias Jeppsson <mathias.jeppsson@sonymobile.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-12mwifiex: correction in mcs index checkAmitkumar Karwar
mwifiex driver supports 2x2 chips as well. Hence valid mcs values are 0 to 15. The check for mcs index is corrected in this patch. For example: if 40MHz is enabled and mcs index is 11, "iw link" command would show "tx bitrate: 108.0 MBit/s" without this patch. Now it shows "tx bitrate: 108.0 MBit/s MCS 11 40Mhz" with the patch. Cc: "3.2.y, 3.3.y, 3.4.y" <stable@vger.kernel.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11mwl8k: fix possible race condition in info->control.sta useThomas Huehn
info->control.sta may only be dereferenced during the drv_tx call otherwise could lead to use-after-free bugs Reported-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11mac80211: Fix the Problem of Unreachable Mesh STA from DSChun-Yeow Yeoh
This patch fixes the problem of unreachable mesh STA from Distribution System (DS) due to the introduction of previous patch solving the mesh STA joining from one MBSS to another MBSS. Reported-by: Georgiewskiy Yuriy <bottleman@icf.org.ru> Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-10mac80211: fix read outside array boundsChristian Lamparter
ieee802_1d_to_ac is defined as a const int[8], but the tid parameter has a range from 0 to 15. Cc: stable@vger.kernel.org Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-10NFC: Fix order of arguments to list_add_tail() when queueing HCP framesMathias Jeppsson
The HCP message should be added to transmit queue, not the other way around. Signed-off-by: Mathias Jeppsson <mathias.jeppsson@sonymobile.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-10NFC: Fix empty HCI message list checkMathias Jeppsson
list_first_entry() will never return NULL. Instead use list_for_each_entry_safe() to iterate through the list. Signed-off-by: Mathias Jeppsson <mathias.jeppsson@sonymobile.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09iwlegacy: don't mess up the SCD when removing a keyEmmanuel Grumbach
When we remove a key, we put a key index which was supposed to tell the fw that we are actually removing the key. But instead the fw took that index as a valid index and messed up the SRAM of the device. This memory corruption on the device mangled the data of the SCD. The impact on the user is that SCD queue 2 got stuck after having removed keys. Reported-by: Paul Bolle <pebolle@tiscali.nl> Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09iwlegacy: always monitor for stuck queuesStanislaw Gruszka
This is iwlegacy version of: commit 342bbf3fee2fa9a18147e74b2e3c4229a4564912 Author: Johannes Berg <johannes.berg@intel.com> Date: Sun Mar 4 08:50:46 2012 -0800 iwlwifi: always monitor for stuck queues If we only monitor while associated, the following can happen: - we're associated, and the queue stuck check runs, setting the queue "touch" time to X - we disassociate, stopping the monitoring, which leaves the time set to X - almost 2s later, we associate, and enqueue a frame - before the frame is transmitted, we monitor for stuck queues, and find the time set to X, although it is now later than X + 2000ms, so we decide that the queue is stuck and erroneously restart the device Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09rt2x00usb: fix indexes ordering on RX queue kickStanislaw Gruszka
On rt2x00_dmastart() we increase index specified by Q_INDEX and on rt2x00_dmadone() we increase index specified by Q_INDEX_DONE. So entries between Q_INDEX_DONE and Q_INDEX are those we currently process in the hardware. Entries between Q_INDEX and Q_INDEX_DONE are those we can submit to the hardware. According to that fix rt2x00usb_kick_queue(), as we need to submit RX entries that are not processed by the hardware. It worked before only for empty queue, otherwise was broken. Note that for TX queues indexes ordering are ok. We need to kick entries that have filled skb, but was not submitted to the hardware, i.e. started from Q_INDEX_DONE and have ENTRY_DATA_PENDING bit set. From practical standpoint this fixes RX queue stall, usually reproducible in AP mode, like for example reported here: https://bugzilla.redhat.com/show_bug.cgi?id=828824 Reported-and-tested-by: Franco Miceli <fmiceli@plan.ceibal.edu.uy> Reported-and-tested-by: Tom Horsley <horsley1953@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09mwifiex: fix Coverity SCAN CID 709078: Resource leak (RESOURCE_LEAK)Bing Zhao
> *. CID 709078: Resource leak (RESOURCE_LEAK) > - drivers/net/wireless/mwifiex/cfg80211.c, line: 935 > Assigning: "bss_cfg" = storage returned from "kzalloc(132UL, 208U)" > - but was not free > drivers/net/wireless/mwifiex/cfg80211.c:935 Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09mac80211: destroy assoc_data correctly if assoc failsEliad Peller
If association failed due to internal error (e.g. no supported rates IE), we call ieee80211_destroy_assoc_data() with assoc=true, while we actually reject the association. This results in the BSSID not being zeroed out. After passing assoc=false, we no longer have to call sta_info_destroy_addr() explicitly. While on it, move the "associated" message after the assoc_success check. Cc: stable@vger.kernel.org [3.4+] Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09NFC: Prevent NULL deref when getting socket nameSasha Levin
llcp_sock_getname can be called without a device attached to the nfc_llcp_sock. This would lead to the following BUG: [ 362.341807] BUG: unable to handle kernel NULL pointer dereference at (null) [ 362.341815] IP: [<ffffffff836258e5>] llcp_sock_getname+0x75/0xc0 [ 362.341818] PGD 31b35067 PUD 30631067 PMD 0 [ 362.341821] Oops: 0000 [#627] PREEMPT SMP DEBUG_PAGEALLOC [ 362.341826] CPU 3 [ 362.341827] Pid: 7816, comm: trinity-child55 Tainted: G D W 3.5.0-rc4-next-20120628-sasha-00005-g9f23eb7 #479 [ 362.341831] RIP: 0010:[<ffffffff836258e5>] [<ffffffff836258e5>] llcp_sock_getname+0x75/0xc0 [ 362.341832] RSP: 0018:ffff8800304fde88 EFLAGS: 00010286 [ 362.341834] RAX: 0000000000000000 RBX: ffff880033cb8000 RCX: 0000000000000001 [ 362.341835] RDX: ffff8800304fdec4 RSI: ffff8800304fdec8 RDI: ffff8800304fdeda [ 362.341836] RBP: ffff8800304fdea8 R08: 7ebcebcb772b7ffb R09: 5fbfcb9c35bdfd53 [ 362.341838] R10: 4220020c54326244 R11: 0000000000000246 R12: ffff8800304fdec8 [ 362.341839] R13: ffff8800304fdec4 R14: ffff8800304fdec8 R15: 0000000000000044 [ 362.341841] FS: 00007effa376e700(0000) GS:ffff880035a00000(0000) knlGS:0000000000000000 [ 362.341843] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 362.341844] CR2: 0000000000000000 CR3: 0000000030438000 CR4: 00000000000406e0 [ 362.341851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 362.341856] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 362.341858] Process trinity-child55 (pid: 7816, threadinfo ffff8800304fc000, task ffff880031270000) [ 362.341858] Stack: [ 362.341862] ffff8800304fdea8 ffff880035156780 0000000000000000 0000000000001000 [ 362.341865] ffff8800304fdf78 ffffffff83183b40 00000000304fdec8 0000006000000000 [ 362.341868] ffff8800304f0027 ffffffff83729649 ffff8800304fdee8 ffff8800304fdf48 [ 362.341869] Call Trace: [ 362.341874] [<ffffffff83183b40>] sys_getpeername+0xa0/0x110 [ 362.341877] [<ffffffff83729649>] ? _raw_spin_unlock_irq+0x59/0x80 [ 362.341882] [<ffffffff810f342b>] ? do_setitimer+0x23b/0x290 [ 362.341886] [<ffffffff81985ede>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 362.341889] [<ffffffff8372a539>] system_call_fastpath+0x16/0x1b [ 362.341921] Code: 84 00 00 00 00 00 b8 b3 ff ff ff 48 85 db 74 54 66 41 c7 04 24 27 00 49 8d 7c 24 12 41 c7 45 00 60 00 00 00 48 8b 83 28 05 00 00 <8b> 00 41 89 44 24 04 0f b6 83 41 05 00 00 41 88 44 24 10 0f b6 [ 362.341924] RIP [<ffffffff836258e5>] llcp_sock_getname+0x75/0xc0 [ 362.341925] RSP <ffff8800304fde88> [ 362.341926] CR2: 0000000000000000 [ 362.341928] ---[ end trace 6d450e935ee18bf3 ]--- Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09mac80211: correct size the argument to kzalloc in minstrel_htThomas Huehn
msp has type struct minstrel_ht_sta_priv not struct minstrel_ht_sta. (This incorporates the fixup originally posted as "mac80211: fix kzalloc memory corruption introduced in minstrel_ht". -- JWL) Reported-by: Fengguang Wu <wfg@linux.intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27mwifiex: fix memory leak associated with IE manamgementAvinash Patil
Free ap_custom_ie before return from function. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27ath9k: fix panic caused by returning a descriptor we have queued for reuseTom Hughes
Commit 3a2923e83c introduced a bug when a corrupt descriptor is encountered - although the following descriptor is discarded and returned to the queue for reuse the associated frame is also returned for processing. This leads to a panic: BUG: unable to handle kernel NULL pointer dereference at 000000000000003a IP: [<ffffffffa02599a5>] ath_rx_tasklet+0x165/0x1b00 [ath9k] Call Trace: <IRQ> [<ffffffff812d7fa0>] ? map_single+0x60/0x60 [<ffffffffa028f044>] ? ath9k_ioread32+0x34/0x90 [ath9k] [<ffffffffa0292eec>] athk9k_tasklet+0xdc/0x160 [ath9k] [<ffffffff8105e133>] tasklet_action+0x63/0xd0 [<ffffffff8105dbc0>] __do_softirq+0xc0/0x1e0 [<ffffffff8101a873>] ? native_sched_clock+0x13/0x80 [<ffffffff815f9d5c>] call_softirq+0x1c/0x30 [<ffffffff810151f5>] do_softirq+0x75/0xb0 [<ffffffff8105df95>] irq_exit+0xb5/0xc0 [<ffffffff815fa5b3>] do_IRQ+0x63/0xe0 [<ffffffff815f0cea>] common_interrupt+0x6a/0x6a <EOI> [<ffffffff8131840a>] ? intel_idle+0xea/0x150 [<ffffffff813183eb>] ? intel_idle+0xcb/0x150 [<ffffffff814a1db9>] cpuidle_enter+0x19/0x20 [<ffffffff814a23d9>] cpuidle_idle_call+0xa9/0x240 [<ffffffff8101c4bf>] cpu_idle+0xaf/0x120 [<ffffffff815cda8e>] rest_init+0x72/0x74 [<ffffffff81cf4c1a>] start_kernel+0x3b7/0x3c4 [<ffffffff81cf4662>] ? repair_env_string+0x5e/0x5e [<ffffffff81cf4346>] x86_64_start_reservations+0x131/0x135 [<ffffffff81cf444a>] x86_64_start_kernel+0x100/0x10f Making sure bf is cleared to NULL in this case restores the old behaviour. Signed-off-by: Tom Hughes <tom@compton.nu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27mac80211: correct behaviour on unrecognised action framesJohannes Berg
When receiving an "individually addressed" action frame, the receiver is required to return it to the sender. mac80211 gets this wrong as it also returns group addressed (mcast) frames to the sender. Fix this and update the reference to the new 802.11 standards version since things were shuffled around significantly. Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27ath9k: enable serialize_regmode for non-PCIE AR9287Panayiotis Karabassis
https://bugzilla.kernel.org/show_bug.cgi?id=42903 Based on the work of <fynivx@gmail.com> Signed-off-by: Panayiotis Karabassis <panayk@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27rtlwifi: rtl8192cu: New USB IDsLarry Finger
The latest Realtek driver for the RTL8188CU and RTL8192CU chips adds three new USB IDs. Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-26Merge branch 'for-wireless' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-3.0
2012-06-26NFC: Return from rawsock_release when sk is NULLEric Dumazet
Sasha Levin reported following panic : [ 2136.383310] BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0 [ 2136.384022] IP: [<ffffffff8114e400>] __lock_acquire+0xc0/0x4b0 [ 2136.384022] PGD 131c4067 PUD 11c0c067 PMD 0 [ 2136.388106] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 2136.388106] CPU 1 [ 2136.388106] Pid: 24855, comm: trinity-child1 Tainted: G W 3.5.0-rc2-sasha-00015-g7b268f7 #374 [ 2136.388106] RIP: 0010:[<ffffffff8114e400>] [<ffffffff8114e400>] __lock_acquire+0xc0/0x4b0 [ 2136.388106] RSP: 0018:ffff8800130b3ca8 EFLAGS: 00010046 [ 2136.388106] RAX: 0000000000000086 RBX: ffff88001186b000 RCX: 0000000000000000 [ 2136.388106] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 2136.388106] RBP: ffff8800130b3d08 R08: 0000000000000001 R09: 0000000000000000 [ 2136.388106] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000002 [ 2136.388106] R13: 00000000000003b0 R14: 0000000000000000 R15: 0000000000000000 [ 2136.388106] FS: 00007fa5b1bd4700(0000) GS:ffff88001b800000(0000) knlGS:0000000000000000 [ 2136.388106] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2136.388106] CR2: 00000000000003b0 CR3: 0000000011d1f000 CR4: 00000000000406e0 [ 2136.388106] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2136.388106] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 2136.388106] Process trinity-child1 (pid: 24855, threadinfo ffff8800130b2000, task ffff88001186b000) [ 2136.388106] Stack: [ 2136.388106] ffff8800130b3cd8 ffffffff81121785 ffffffff81236774 000080d000000001 [ 2136.388106] ffff88001b9d6c00 00000000001d6c00 ffffffff130b3d08 ffff88001186b000 [ 2136.388106] 0000000000000000 0000000000000002 0000000000000000 0000000000000000 [ 2136.388106] Call Trace: [ 2136.388106] [<ffffffff81121785>] ? sched_clock_local+0x25/0x90 [ 2136.388106] [<ffffffff81236774>] ? get_empty_filp+0x74/0x220 [ 2136.388106] [<ffffffff8114e97a>] lock_acquire+0x18a/0x1e0 [ 2136.388106] [<ffffffff836b37df>] ? rawsock_release+0x4f/0xa0 [ 2136.388106] [<ffffffff837c0ef0>] _raw_write_lock_bh+0x40/0x80 [ 2136.388106] [<ffffffff836b37df>] ? rawsock_release+0x4f/0xa0 [ 2136.388106] [<ffffffff836b37df>] rawsock_release+0x4f/0xa0 [ 2136.388106] [<ffffffff8321cfe8>] sock_release+0x18/0x70 [ 2136.388106] [<ffffffff8321d069>] sock_close+0x29/0x30 [ 2136.388106] [<ffffffff81236bca>] __fput+0x11a/0x2c0 [ 2136.388106] [<ffffffff81236d85>] fput+0x15/0x20 [ 2136.388106] [<ffffffff8321de34>] sys_accept4+0x1b4/0x200 [ 2136.388106] [<ffffffff837c165c>] ? _raw_spin_unlock_irq+0x4c/0x80 [ 2136.388106] [<ffffffff837c1669>] ? _raw_spin_unlock_irq+0x59/0x80 [ 2136.388106] [<ffffffff837c2565>] ? sysret_check+0x22/0x5d [ 2136.388106] [<ffffffff8321de8b>] sys_accept+0xb/0x10 [ 2136.388106] [<ffffffff837c2539>] system_call_fastpath+0x16/0x1b [ 2136.388106] Code: ec 04 00 0f 85 ea 03 00 00 be d5 0b 00 00 48 c7 c7 8a c1 40 84 e8 b1 a5 f8 ff 31 c0 e9 d4 03 00 00 66 2e 0f 1f 84 00 00 00 00 00 <49> 81 7d 00 60 73 5e 85 b8 01 00 00 00 44 0f 44 e0 83 fe 01 77 [ 2136.388106] RIP [<ffffffff8114e400>] __lock_acquire+0xc0/0x4b0 [ 2136.388106] RSP <ffff8800130b3ca8> [ 2136.388106] CR2: 00000000000003b0 [ 2136.388106] ---[ end trace 6d450e935ee18982 ]--- [ 2136.388106] Kernel panic - not syncing: Fatal exception in interrupt rawsock_release() should test if sock->sk is NULL before calling sock_orphan()/sock_put() Reported-by: Sasha Levin <levinsasha928@gmail.com> Tested-by: Sasha Levin <levinsasha928@gmail.com> Cc: stable@kernel.org Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-25iwlwifi: fix activating inactive stationsJohannes Berg
When authentication/association timed out, the driver would complain bitterly, printing the message ACTIVATE a non DRIVER active station id ... addr ... The cause turns out to be that when the AP station is added but we don't associate, the IWL_STA_UCODE_INPROGRESS is set but never cleared. This then causes iwl_restore_stations() to attempt to resend it because it uses the flag internally and uploads even if it didn't set it itself. To fix this issue and not upload the station again when it has already been removed by mac80211, clear the flag after adding it in case we add it only for association. Cc: stable@vger.kernel.org Reviewed-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-25wlcore: drop INET dependencyRandy Dunlap
Mainline build reports: warning: (WL12XX) selects WLCORE which has unmet direct dependencies (NETDEVICES && WLAN && WL_TI && GENERIC_HARDIRQS && MAC80211 && INET) The INET dependency was added in commit 3c6af5b54fe74b6e56efadc22927e4055d00e9fc: wl1271_main.c:(.text+0x271052): undefined reference to `unregister_inetaddr_ notifier' wl1271_main.c:(.text+0x2714d7): undefined reference to `register_inetaddr_no tifier' Driver is doing some filtering based on IP addresses... but this driver no longer has that code and it builds fine even when CONFIG_INET is not enabled, so drop that dependency and eliminate the kconfig warning message. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Luciano Coelho <luciano.coelho@nokia.com> Cc: John W. Linville <linville@tuxdriver.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-25ath9k: fix dynamic WEP related regressionFelix Fietkau
commit 7a532fe7131216a02c81a6c1b1f8632da1195a58 ath9k_hw: fix interpretation of the rx KeyMiss flag This commit used the rx key miss indication to detect packets that were passed from the hardware without being decrypted, however it seems that this bit is not only undefined in the static WEP case, but also for dynamically allocated WEP keys. This caused a regression when using WEP-LEAP. This patch fixes the regression by keeping track of which key indexes refer to CCMP keys and only using the key miss indication for those. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-25NFC: Prevent multiple buffer overflows in NCIDan Rosenberg
Fix multiple remotely-exploitable stack-based buffer overflows due to the NCI code pulling length fields directly from incoming frames and copying too much data into statically-sized arrays. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Cc: stable@kernel.org Cc: security@kernel.org Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-22mwifiex: improve error path handling in usb.cAmitkumar Karwar
skb allocated during initialisation is reused for receiving commands/events by USB interface. We miss to reset skb->data in failure cases. This patch takes care of it. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-22mwifiex: fix bugs in event handling codeAmitkumar Karwar
This patch ensures uniformity in event skb sent by interface code (USB/PCIe/SDIO) which automatically fixes following bugs. 1) For USB interface, same buffer is reused for receiving cmd and events from firmware. While handling events, we perform skb_pull(skb, 4) to remove event header. Corresponding skb_push() call is missing while submitting the buffer. 2) For PCIe interface, event skb is passed with event header. Recently added uAP events EVENT_UAP_STA_ASSOC, EVENT_UAP_STA_DEAUTH will not work for PCIe, as they assume event skb points to event body. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-22mwifiex: fix WPS eapol handshake failureStone Piao
After association, STA will go through eapol handshake with WPS enabled AP. It's observed that WPS handshake fails with some 11n AP. The reason for the failure is that the eapol packet is sent via 11n frame aggregation. The eapol packet should be sent directly without 11n aggregation. This patch fixes the problem by adding WPS session control while dequeuing Tx packets for transmission. Cc: "3.4.y" <stable@vger.kernel.org> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-22mwifiex: fix 11n rx packet drop issueStone Piao
Currently we check the sequence number of last packet received against start_win. If a sequence hole is detected, start_win is updated to next sequence number. Since the rx sequence number is initialized to 0, a corner case exists when BA setup happens immediately after association. As 0 is a valid sequence number, start_win gets increased to 1 incorrectly. This causes the first packet with sequence number 0 being dropped. Initialize rx sequence number as 0xffff and skip adjusting start_win if the sequence number remains 0xffff. The sequence number will be updated once the first packet is received. Cc: "3.0.y, 3.1.y, 3.2.y, 3.3.y, 3.4.y" <stable@vger.kernel.org> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2012-06-21mac80211: clear ifmgd->bssid only after building DELBAEliad Peller
ieee80211_set_disassoc() clears ifmgd->bssid before building DELBA frames, resulting in frames with invalid bssid ("00:00:00:00:00:00"). Fix it by clearing ifmgd->bssid only after building all the needed frames. After this change, we no longer need to save the bssid (before clearing it), so remove the local array. Reported-by: Ido Yariv <ido@wizery.com> Cc: stable@vger.kernel.org Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20ath9k_htc: configure bssid on ASSOC/IBSS changeRajkumar Manoharan
After the change "mac80211: remove spurious BSSID change flag", BSS_CHANGED_BSSID will not be passed on association or IBSS status changes. So it could be better to program bssid on ASSOC or IBSS change notification. Not doing so, is affecting the packet transmission. Cc: stable@vger.kernel.org [3.4+] Reported-by: Michael Leun <lkml20120218@newton.leun.net> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20iwlwifi: remove log_event debugfs file debugging is disabledJohannes Berg
When debugging is disabled, the event log functions aren't functional in the way that the debugfs file expects. This leads to the debugfs access crashing. Since the event log functions aren't functional then, remove the debugfs file when CONFIG_IWLWIFI_DEBUG is not set. Cc: stable@kernel.org Reported-by: Lekensteyn <lekensteyn@gmail.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20ath9k_hw: avoid possible infinite loop in ar9003_get_pll_sqsum_dvcMohammed Shafi Shajakhan
"ath9k: Fix softlockup in AR9485" with commit id 64bc1239c790e051ff677e023435d770d2ffa174 fixed the reported issue, yet its better to avoid the possible infinite loop in ar9003_get_pll_sqsum_dvc by having a timeout as suggested by ath9k maintainers. http://www.spinics.net/lists/linux-wireless/msg92126.html. Based on my testing PLL's locking measurement is done in ~200us (2 iterations). Cc: stable@vger.kernel.org Cc: Rolf Offermanns <rolf.offermanns@gmx.net> Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20wl1251: Fix memory leaks in SPI initializationGrazvydas Ignotas
This patch fixes two memory leaks in the SPI initialization code. Patch based on old maemo patch by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20wl1251: always report beacon loss to the stackGrazvydas Ignotas
Always report beacon loss to the stack, not only when in powersave state. This is because there's possibility that the driver disables PSM before it handles old BSS_LOSE_EVENT, so beacon loss has to be reported. Patch based on old maemo patch by: Janne Ylalehto <janne.ylalehto@nokia.com> Juuso Oikarinen <juuso.oikarinen@nokia.com> Luciano Coelho <luciano.coelho@nokia.com> Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20wl1251: fix TSF calculationGrazvydas Ignotas
Cast MSB part of current TSF to u64 to prevent loss of most significant bits. MSB should also be shifted by 32. Patch based on old maemo patch by: Yuri Kululin <ext-yuri.kululin@nokia.com> Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-19Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2012-06-19mwifiex: fix wrong return values in add_virtual_intf() error casesBing Zhao
add_virtual_intf() needs to return an ERR_PTR(), instead of NULL, on errors, otherwise cfg80211 will crash. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-19airo: copying wrong data in airo_get_aplist()Dan Carpenter
"qual" used to be declared on the stack, but then in 998a5a7d6a ("airo: reduce stack memory footprint") we made it dynamically allocated. Unfortunately the memcpy() here was missed and it's still copying stack memory instead of the data that we want. In other words, "&qual" should be "qual". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-19mwifiex: fix uAP TX packet timeout issueAvinash Patil
When running heavy traffic we stop the tx queue if the pending packet count reaches certain threshold. Later, the tx queue should be woken up as soon as the packet count falls below the threshold. Current code wakes TX queue up on STA interface only. Removing the check for STA interface will allow both STA and AP interfaces to resume transmit when tx_pending count becomes low. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-19ath5k: remove _bh from inner locksBob Copeland
spin_unlock_bh(&txq->lock) already disables softirqs so we don't want to do it here. Fixes smatch warnings: drivers/net/wireless/ath/ath5k/base.c:1048 ath5k_drain_tx_buffs() error: double lock 'bottom_half:' drivers/net/wireless/ath/ath5k/base.c:1056 ath5k_drain_tx_buffs() error: double unlock 'bottom_half:' Reported-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-19ath9k: fix invalid pointer access in the tx pathFelix Fietkau
After setup_frame_info has been called, only info->control.rates is still valid, other control fields have been overwritten by the ath_frame_info data. Move the access to info->control.vif for checking short preamble to setup_frame_info before it gets overwritten. This regression was introduced in commit d47a61aa "ath9k: Fix multi-VIF BSS handling" Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Thomas Hühn <thomas@net.t-labs.tu-berlin.de> Acked-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Cc: stable@vger.kernel.org [3.4] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-19ath9k: fix a tx rate duration calculation bugFelix Fietkau
The rate pointer variable for a rate series is used in a loop before it is initialized. This went unnoticed because it was used earlier for the RTS/CTS rate. This bug can lead to the wrong PHY type being passed to the duration calculation function. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-19Bluetooth: btmrvl: Do not send vendor events to bluetooth stackAndrei Emeltchenko
Vendor-specific events shall be processed in driver and not sent to bluetooth stack where they screw up HCI command countings. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-14Bluetooth: Fix sending HCI_Disconnect only when connectedVishal Agarwal
HCI_Disconnect should only be sent after connection is established. If connection is not yet established and HCI_Disconnect is called then disconnection complete will be received with a handle which does not exist and hence this event will be ignored. But as mgmt.c will not receive this event, its variable for pending command is not cleared.This will result in future Disconnect commands for that BD Address to be blocked with error busy. Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-13ath9k: Fix softlockup in AR9485Mohammed Shafi Shajakhan
steps to recreate: load latest ath9k driver with AR9485 stop the network-manager and wpa_supplicant bring the interface up Call Trace: [<ffffffffa0517490>] ? ath_hw_check+0xe0/0xe0 [ath9k] [<ffffffff812cd1e8>] __const_udelay+0x28/0x30 [<ffffffffa03bae7a>] ar9003_get_pll_sqsum_dvc+0x4a/0x80 [ath9k_hw] [<ffffffffa05174eb>] ath_hw_pll_work+0x5b/0xe0 [ath9k] [<ffffffff810744fe>] process_one_work+0x11e/0x470 [<ffffffff8107530f>] worker_thread+0x15f/0x360 [<ffffffff810751b0>] ? manage_workers+0x230/0x230 [<ffffffff81079af3>] kthread+0x93/0xa0 [<ffffffff815fd3a4>] kernel_thread_helper+0x4/0x10 [<ffffffff81079a60>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815fd3a0>] ? gs_change+0x13/0x13 ensure that the PLL-WAR for AR9485/AR9340 is executed only if the STA is associated (or) IBSS/AP mode had started beaconing. Ideally this WAR is needed to recover from some rare beacon stuck during stress testing. Before the STA is associated/IBSS had started beaconing, PLL4(0x1618c) always seem to have zero even though we had configured PLL3(0x16188) to query about PLL's locking status. When we keep on polling infinitely PLL4's 8th bit(ie check for PLL locking measurements is done), machine hangs due to softlockup. fixes https://bugzilla.redhat.com/show_bug.cgi?id=811142 Reported-by: Rolf Offermanns <rolf.offermanns@gmx.net> Cc: stable@vger.kernel.org [3.0+] Tested-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-04 14:20:32 +0000