| Age | Commit message (Collapse) | Author |
|---|
|
ARCH_USES_NUMA_PROT_NONE was defined for architectures that implemented
_PAGE_NUMA using _PROT_NONE. This saved using an additional PTE bit and
relied on the fact that PROT_NONE vmas were skipped by the NUMA hinting
fault scanner. This was found to be conceptually confusing with a lot of
implicit assumptions and it was asked that an alternative be found.
Commit c46a7c81 "x86: define _PAGE_NUMA by reusing software bits on the
PMD and PTE levels" redefined _PAGE_NUMA on x86 to be one of the swap PTE
bits and shrunk the maximum possible swap size but it did not go far
enough. There are no architectures that reuse _PROT_NONE as _PROT_NUMA
but the relics still exist.
This patch removes ARCH_USES_NUMA_PROT_NONE and removes some unnecessary
duplication in powerpc vs the generic implementation by defining the types
the core NUMA helpers expected to exist from x86 with their ppc64
equivalent. This necessitated that a PTE bit mask be created that
identified the bits that distinguish present from NUMA pte entries but it
is expected this will only differ between arches based on _PAGE_PROTNONE.
The naming for the generic helpers was taken from x86 originally but ppc64
has types that are equivalent for the purposes of the helper so they are
mapped instead of duplicating code.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently memory-hotplug has two limits:
1. If the memory block is in ZONE_NORMAL, you can change it to
ZONE_MOVABLE, but this memory block must be adjacent to ZONE_MOVABLE.
2. If the memory block is in ZONE_MOVABLE, you can change it to
ZONE_NORMAL, but this memory block must be adjacent to ZONE_NORMAL.
With this patch, we can easy to know a memory block can be onlined to
which zone, and don't need to know the above two limits.
Updated the related Documentation.
[akpm@linux-foundation.org: use conventional comment layout]
[akpm@linux-foundation.org: fix build with CONFIG_MEMORY_HOTREMOVE=n]
[akpm@linux-foundation.org: remove unused local zone_prev]
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: vishnu.ps <vishnu.ps@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Because of chicken and egg problem, initialization of SLAB is really
complicated. We need to allocate cpu cache through SLAB to make the
kmem_cache work, but before initialization of kmem_cache, allocation
through SLAB is impossible.
On the other hand, SLUB does initialization in a more simple way. It uses
percpu allocator to allocate cpu cache so there is no chicken and egg
problem.
So, this patch try to use percpu allocator in SLAB. This simplifies the
initialization step in SLAB so that we could maintain SLAB code more
easily.
In my testing there is no performance difference.
This implementation relies on percpu allocator. Because percpu allocator
uses vmalloc address space, vmalloc address space could be exhausted by
this change on many cpu system with *32 bit* kernel. This implementation
can cover 1024 cpus in worst case by following calculation.
Worst: 1024 cpus * 4 bytes for pointer * 300 kmem_caches *
120 objects per cpu_cache = 140 MB
Normal: 1024 cpus * 4 bytes for pointer * 150 kmem_caches(slab merge) *
80 objects per cpu_cache = 46 MB
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Slab merge is good feature to reduce fragmentation. If new creating slab
have similar size and property with exsitent slab, this feature reuse it
rather than creating new one. As a result, objects are packed into fewer
slabs so that fragmentation is reduced.
Below is result of my testing.
* After boot, sleep 20; cat /proc/meminfo | grep Slab
<Before>
Slab: 25136 kB
<After>
Slab: 24364 kB
We can save 3% memory used by slab.
For supporting this feature in SLAB, we need to implement SLAB specific
kmem_cache_flag() and __kmem_cache_alias(), because SLUB implements some
SLUB specific processing related to debug flag and object size change on
these functions.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Slab merge is good feature to reduce fragmentation. Now, it is only
applied to SLUB, but, it would be good to apply it to SLAB. This patch is
preparation step to apply slab merge to SLAB by commonizing slab merge
logic.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix a bug (discovered with kmemcheck) in for_each_kmem_cache_node(). The
for loop reads the array "node" before verifying that the index is within
the range. This results in kmemcheck warning.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
of task_struct allocations")
After discussions with Tejun, we don't want to spread the use of
cpu_to_mem() (and thus knowledge of allocators/NUMA topology details) into
callers, but would rather ensure the callees correctly handle memoryless
nodes. With the previous patches ("topology: add support for
node_to_mem_node() to determine the fallback node" and "slub: fallback to
node_to_mem_node() node if allocating on memoryless node") adding and
using node_to_mem_node(), we can safely undo part of the change to the
kthread logic from 81c98869faa5.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Han Pingtian <hanpt@linux.vnet.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Anton Blanchard <anton@samba.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Update the SLUB code to search for partial slabs on the nearest node with
memory in the presence of memoryless nodes. Additionally, do not consider
it to be an ALLOC_NODE_MISMATCH (and deactivate the slab) when a
memoryless-node specified allocation goes off-node.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Han Pingtian <hanpt@linux.vnet.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Anton Blanchard <anton@samba.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Anton noticed (http://www.spinics.net/lists/linux-mm/msg67489.html) that
on ppc LPARs with memoryless nodes, a large amount of memory was consumed
by slabs and was marked unreclaimable. He tracked it down to slab
deactivations in the SLUB core when we allocate remotely, leading to poor
efficiency always when memoryless nodes are present.
After much discussion, Joonsoo provided a few patches that help
significantly. They don't resolve the problem altogether:
- memory hotplug still needs testing, that is when a memoryless node
becomes memory-ful, we want to dtrt
- there are other reasons for going off-node than memoryless nodes,
e.g., fully exhausted local nodes
Neither case is resolved with this series, but I don't think that should
block their acceptance, as they can be explored/resolved with follow-on
patches.
The series consists of:
[1/3] topology: add support for node_to_mem_node() to determine the
fallback node
[2/3] slub: fallback to node_to_mem_node() node if allocating on
memoryless node
- Joonsoo's patches to cache the nearest node with memory for each
NUMA node
[3/3] Partial revert of 81c98869faa5 (""kthread: ensure locality of
task_struct allocations")
- At Tejun's request, keep the knowledge of memoryless node fallback
to the allocator core.
This patch (of 3):
We need to determine the fallback node in slub allocator if the allocation
target node is memoryless node. Without it, the SLUB wrongly select the
node which has no memory and can't use a partial slab, because of node
mismatch. Introduced function, node_to_mem_node(X), will return a node Y
with memory that has the nearest distance. If X is memoryless node, it
will return nearest distance node, but, if X is normal node, it will
return itself.
We will use this function in following patch to determine the fallback
node.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Han Pingtian <hanpt@linux.vnet.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Anton Blanchard <anton@samba.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Tracing of mergeable slabs as well as uses of failslab are confusing since
the objects of multiple slab caches will be affected. Moreover this
creates a situation where a mergeable slab will become unmergeable.
If tracing or failslab testing is desired then it may be best to switch
merging off for starters.
Signed-off-by: Christoph Lameter <cl@linux.com>
Tested-by: WANG Chao <chaowang@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
cache_free_alien() is rarely used function when node mismatch. But, it is
defined with inline attribute so it is inlined to __cache_free() which is
core free function of slab allocator. It uselessly makes
kmem_cache_free()/kfree() functions large. What we really need to inline
is just checking node match so this patch factor out other parts of
cache_free_alien() to reduce code size of kmem_cache_free()/ kfree().
<Before>
nm -S mm/slab.o | grep -e "T kfree" -e "T kmem_cache_free"
00000000000011e0 0000000000000228 T kfree
0000000000000670 0000000000000216 T kmem_cache_free
<After>
nm -S mm/slab.o | grep -e "T kfree" -e "T kmem_cache_free"
0000000000001110 00000000000001b5 T kfree
0000000000000750 0000000000000181 T kmem_cache_free
You can see slightly reduced size of text: 0x228->0x1b5, 0x216->0x181.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Our intention of __ac_put_obj() is that it doesn't affect anything if
sk_memalloc_socks() is disabled. But, because __ac_put_obj() is too
small, compiler inline it to ac_put_obj() and affect code size of free
path. This patch add noinline keyword for __ac_put_obj() not to distrupt
normal free path at all.
<Before>
nm -S slab-orig.o |
grep -e "t cache_alloc_refill" -e "T kfree" -e "T kmem_cache_free"
0000000000001e80 00000000000002f5 t cache_alloc_refill
0000000000001230 0000000000000258 T kfree
0000000000000690 000000000000024c T kmem_cache_free
<After>
nm -S slab-patched.o |
grep -e "t cache_alloc_refill" -e "T kfree" -e "T kmem_cache_free"
0000000000001e00 00000000000002e5 t cache_alloc_refill
00000000000011e0 0000000000000228 T kfree
0000000000000670 0000000000000216 T kmem_cache_free
cache_alloc_refill: 0x2f5->0x2e5
kfree: 0x256->0x228
kmem_cache_free: 0x24c->0x216
code size of each function is reduced slightly.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now, due to likely keyword, compiled code of cache_flusharray() is on
unlikely.text section. Although it is uncommon case compared to free to
cpu cache case, it is common case than free_block(). But, free_block() is
on normal text section. This patch fix this odd situation to remove
likely keyword.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now, we track caller if tracing or slab debugging is enabled. If they are
disabled, we could save one argument passing overhead by calling
__kmalloc(_node)(). But, I think that it would be marginal. Furthermore,
default slab allocator, SLUB, doesn't use this technique so I think that
it's okay to change this situation.
After this change, we can turn on/off CONFIG_DEBUG_SLAB without full
kernel build and remove some complicated '#if' defintion. It looks more
benefitial to me.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We don't need to keep kmem_cache definition in include/linux/slab.h if we
don't need to inline kmem_cache_size(). According to my code inspection,
this function is only called at lc_create() in lib/lru_cache.c which may
be called at initialization phase of something, so we don't need to inline
it. Therfore, move it to slab_common.c and move kmem_cache definition to
internal header.
After this change, we can change kmem_cache definition easily without full
kernel build. For instance, we can turn on/off CONFIG_SLUB_STATS without
full kernel build.
[akpm@linux-foundation.org: export kmem_cache_size() to modules]
[rdunlap@infradead.org: add header files to fix kmemcheck.c build errors]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
False positive:
mm/slab_common.c: In function 'kmem_cache_create':
mm/slab_common.c:204: warning: 's' may be used uninitialized in this function
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On some ARCHs modules range is eauql to vmalloc range. E.g on i686
"#define MODULES_VADDR VMALLOC_START"
"#define MODULES_END VMALLOC_END"
This will cause 2 duplicate program segments in /proc/kcore, and no flag
to indicate they are different. This is confusing. And usually people
who need check the elf header or read the content of kcore will check
memory ranges. Two program segments which are the same are unnecessary.
So check if the modules range is equal to vmalloc range. If so, just skip
adding the modules range.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
- Rename vm_is_stack() to task_of_stack() and change it to return
"struct task_struct *" rather than the global (and thus wrong in
general) pid_t.
- Add the new pid_of_stack() helper which calls task_of_stack() and
uses the right namespace to report the correct pid_t.
Unfortunately we need to define this helper twice, in task_mmu.c
and in task_nommu.c. perhaps it makes sense to add fs/proc/util.c
and move at least pid_of_stack/task_of_stack there to avoid the
code duplication.
- Change show_map_vma() and show_numa_map() to use the new helper.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
m_start() can use get_proc_task() instead, and "struct inode *"
provides more potentially useful info, see the next changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I do not know if CONFIG_PREEMPT/SMP is possible without CONFIG_MMU
but the usage of task->mm in m_stop(). The task can exit/exec before
we take mmap_sem, in this case m_stop() can hit NULL or unlock the
wrong rw_semaphore.
Also, this code uses priv->task != NULL to decide whether we need
up_read/mmput. This is correct, but we will probably kill priv->task.
Change m_start/m_stop to rely on IS_ERR_OR_NULL() like task_mmu.c does.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Copy-and-paste the changes from "fs/proc/task_mmu.c: shift mm_access()
from m_start() to proc_maps_open()" into task_nommu.c.
Change maps_open() to initialize priv->mm using proc_mem_open(), m_start()
can rely on atomic_inc_not_zero(mm_users) like task_mmu.c does.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Cleanup and preparation. maps_open() can use __seq_open_private()
like proc_maps_open() does.
[akpm@linux-foundation.org: deuglify]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change the main loop in m_start() to update m->version. Mostly for
consistency, but this can help to avoid the same loop if the very
1st ->show() fails due to seq_overflow().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add the "last_addr" optimization back. Like before, every ->show()
method checks !seq_overflow() and sets m->version = vma->vm_start.
However, it also checks that m_next_vma(vma) != NULL, otherwise it
sets m->version = -1 for the lockless "EOF" fast-path in m_start().
m_start() can simply do find_vma() + m_next_vma() if last_addr is
not zero, the code looks clear and simple and this case is clearly
separated from "scan vmas" path.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Extract the tail_vma/vm_next calculation from m_next() into the new
trivial helper, m_next_vma().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that m->version is gone we can cleanup m_start(). In particular,
- Remove the "unsigned long" typecast, m->index can't be negative
or exceed ->map_count. But lets use "unsigned int pos" to make
it clear that "pos < map_count" is safe.
- Remove the unnecessary "vma != NULL" check in the main loop. It
can't be NULL unless we have a vm bug.
- This also means that "pos < map_count" case can simply return the
valid vma and avoid "goto" and subsequent checks.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
m_start() carefully documents, checks, and sets "m->version = -1" if
we are going to return NULL. The only problem is that we will be never
called again if m_start() returns NULL, so this is simply pointless
and misleading.
Otoh, ->show() methods m->version = 0 if vma == tail_vma and this is
just wrong, we want -1 in this case. And in fact we also want -1 if
->vm_next == NULL and ->tail_vma == NULL.
And it is not used consistently, the "scan vmas" loop in m_start()
should update last_addr too.
Finally, imo the whole "last_addr" logic in m_start() looks horrible.
find_vma(last_addr) is called unconditionally even if we are not going
to use the result. But the main problem is that this code participates
in tail_vma-or-NULL mess, and this looks simply unfixable.
Remove this optimization. We will add it back after some cleanups.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
1. There is no reason to reset ->tail_vma in m_start(), if we return
IS_ERR_OR_NULL() it won't be used.
2. m_start() also clears priv->task to ensure that m_stop() won't use
the stale pointer if we fail before get_task_struct(). But this is
ugly and confusing, move this initialization in m_stop().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
1. Kill the first "vma != NULL" check. Firstly this is not possible,
m_next() won't be called if ->start() or the previous ->next()
returns NULL.
And if it was possible the 2nd "vma != tail_vma" check is buggy,
we should not wrongly return ->tail_vma.
2. Make this function readable. The logic is very simple, we should
return check "vma != tail" once and return "vm_next || tail_vma".
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
m_start() drops ->mmap_sem and does mmput() if it retuns vsyscall
vma. This is because in this case m_stop()->vma_stop() obviously
can't use gate_vma->vm_mm.
Now that we have proc_maps_private->mm we can simplify this logic:
- Change m_start() to return with ->mmap_sem held unless it returns
IS_ERR_OR_NULL().
- Change vma_stop() to use priv->mm and avoid the ugly vma checks,
this makes "vm_area_struct *vma" unnecessary.
- This also allows m_start() to use vm_stop().
- Cleanup m_next() to follow the new locking rule.
Note: m_stop() looks very ugly, and this temporary uglifies it
even more. Fixed by the next change.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A simple test-case from Kirill Shutemov
cat /proc/self/maps >/dev/null
chmod +x /proc/self/net/packet
exec /proc/self/net/packet
makes lockdep unhappy, cat/exec take seq_file->lock + cred_guard_mutex in
the opposite order.
It's a false positive and probably we should not allow "chmod +x" on proc
files. Still I think that we should avoid mm_access() and cred_guard_mutex
in sys_read() paths, security checking should happen at open time. Besides,
this doesn't even look right if the task changes its ->mm between m_stop()
and m_start().
Add the new "mm_struct *mm" member into struct proc_maps_private and change
proc_maps_open() to initialize it using proc_mem_open(). Change m_start() to
use priv->mm if atomic_inc_not_zero(mm_users) succeeds or return NULL (eof)
otherwise.
The only complication is that proc_maps_open() users should additionally do
mmdrop() in fop->release(), add the new proc_map_release() helper for that.
Note: this is the user-visible change, if the task execs after open("maps")
the new ->mm won't be visible via this file. I hope this is fine, and this
matches /proc/pid/mem bahaviour.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Extract the mm_access() code from __mem_open() into the new helper,
proc_mem_open(), the next patch will add another caller.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
do_maps_open() and numa_maps_open() are overcomplicated, they could use
__seq_open_private(). Plus they do the same, just sizeof(*priv)
Change them to use a new simple helper, proc_maps_open(ops, psize). This
simplifies the code and allows us to do the next changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
get_gate_vma(priv->task->mm) looks ugly and wrong, task->mm can be NULL or
it can changed by exec right after mm_access().
And in theory this race is not harmless, the task can exec and then later
exit and free the new mm_struct. In this case get_task_mm(oldmm) can't
help, get_gate_vma(task->mm) can read the freed/unmapped memory.
I think that priv->task should simply die and hold_task_mempolicy() logic
can be simplified. tail_vma logic asks for cleanups too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For now, soft lockup detector warns once for each case of process
softlockup. But the thread 'watchdog/n' may not always get the cpu at the
time slot between the task switch of two processes hogging that cpu to
reset soft_watchdog_warn.
An example would be two processes hogging the cpu. Process A causes the
softlockup warning and is killed manually by a user. Process B
immediately becomes the new process hogging the cpu preventing the
softlockup code from resetting the soft_watchdog_warn variable.
This case is a false negative of "warn only once for a process", as there
may be a different process that is going to hog the cpu. Resolve this by
saving/checking the task pointer of the hogging process and use that to
reset soft_watchdog_warn too.
[dzickus@redhat.com: update comment]
Signed-off-by: chai wen <chaiw.fnst@cn.fujitsu.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For commit ocfs2 journal, ocfs2 journal thread will acquire the mutex
osb->journal->j_trans_barrier and wake up jbd2 commit thread, then it
will wait until jbd2 commit thread done. In order journal mode, jbd2
needs flushing dirty data pages first, and this needs get page lock.
So osb->journal->j_trans_barrier should be got before page lock.
But ocfs2_write_zero_page() and ocfs2_write_begin_inline() obey this
locking order, and this will cause deadlock and hung the whole cluster.
One deadlock catched is the following:
PID: 13449 TASK: ffff8802e2f08180 CPU: 31 COMMAND: "oracle"
#0 [ffff8802ee3f79b0] __schedule at ffffffff8150a524
#1 [ffff8802ee3f7a58] schedule at ffffffff8150acbf
#2 [ffff8802ee3f7a68] rwsem_down_failed_common at ffffffff8150cb85
#3 [ffff8802ee3f7ad8] rwsem_down_read_failed at ffffffff8150cc55
#4 [ffff8802ee3f7ae8] call_rwsem_down_read_failed at ffffffff812617a4
#5 [ffff8802ee3f7b50] ocfs2_start_trans at ffffffffa0498919 [ocfs2]
#6 [ffff8802ee3f7ba0] ocfs2_zero_start_ordered_transaction at ffffffffa048b2b8 [ocfs2]
#7 [ffff8802ee3f7bf0] ocfs2_write_zero_page at ffffffffa048e9bd [ocfs2]
#8 [ffff8802ee3f7c80] ocfs2_zero_extend_range at ffffffffa048ec83 [ocfs2]
#9 [ffff8802ee3f7ce0] ocfs2_zero_extend at ffffffffa048edfd [ocfs2]
#10 [ffff8802ee3f7d50] ocfs2_extend_file at ffffffffa049079e [ocfs2]
#11 [ffff8802ee3f7da0] ocfs2_setattr at ffffffffa04910ed [ocfs2]
#12 [ffff8802ee3f7e70] notify_change at ffffffff81187d29
#13 [ffff8802ee3f7ee0] do_truncate at ffffffff8116bbc1
#14 [ffff8802ee3f7f50] sys_ftruncate at ffffffff8116bcbd
#15 [ffff8802ee3f7f80] system_call_fastpath at ffffffff81515142
RIP: 00007f8de750c6f7 RSP: 00007fffe786e478 RFLAGS: 00000206
RAX: 000000000000004d RBX: ffffffff81515142 RCX: 0000000000000000
RDX: 0000000000000200 RSI: 0000000000028400 RDI: 000000000000000d
RBP: 00007fffe786e040 R8: 0000000000000000 R9: 000000000000000d
R10: 0000000000000000 R11: 0000000000000206 R12: 000000000000000d
R13: 00007fffe786e710 R14: 00007f8de70f8340 R15: 0000000000028400
ORIG_RAX: 000000000000004d CS: 0033 SS: 002b
crash64> bt
PID: 7610 TASK: ffff88100fd56140 CPU: 1 COMMAND: "ocfs2cmt"
#0 [ffff88100f4d1c50] __schedule at ffffffff8150a524
#1 [ffff88100f4d1cf8] schedule at ffffffff8150acbf
#2 [ffff88100f4d1d08] jbd2_log_wait_commit at ffffffffa01274fd [jbd2]
#3 [ffff88100f4d1d98] jbd2_journal_flush at ffffffffa01280b4 [jbd2]
#4 [ffff88100f4d1dd8] ocfs2_commit_cache at ffffffffa0499b14 [ocfs2]
#5 [ffff88100f4d1e38] ocfs2_commit_thread at ffffffffa0499d38 [ocfs2]
#6 [ffff88100f4d1ee8] kthread at ffffffff81090db6
#7 [ffff88100f4d1f48] kernel_thread_helper at ffffffff81516284
crash64> bt
PID: 7609 TASK: ffff88100f2d4480 CPU: 0 COMMAND: "jbd2/dm-20-86"
#0 [ffff88100def3920] __schedule at ffffffff8150a524
#1 [ffff88100def39c8] schedule at ffffffff8150acbf
#2 [ffff88100def39d8] io_schedule at ffffffff8150ad6c
#3 [ffff88100def39f8] sleep_on_page at ffffffff8111069e
#4 [ffff88100def3a08] __wait_on_bit_lock at ffffffff8150b30a
#5 [ffff88100def3a58] __lock_page at ffffffff81110687
#6 [ffff88100def3ab8] write_cache_pages at ffffffff8111b752
#7 [ffff88100def3be8] generic_writepages at ffffffff8111b901
#8 [ffff88100def3c48] journal_submit_data_buffers at ffffffffa0120f67 [jbd2]
#9 [ffff88100def3cf8] jbd2_journal_commit_transaction at ffffffffa0121372[jbd2]
#10 [ffff88100def3e68] kjournald2 at ffffffffa0127a86 [jbd2]
#11 [ffff88100def3ee8] kthread at ffffffff81090db6
#12 [ffff88100def3f48] kernel_thread_helper at ffffffff81516284
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Alex Chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following case may lead to o2net_wq and o2hb thread deadlock on
o2hb_callback_sem.
Currently there are 2 nodes say N1, N2 in the cluster. And N2 down, at
the same time, N3 tries to join the cluster. So N1 will handle node
down (N2) and join (N3) simultaneously.
o2hb o2net_wq
->o2hb_do_disk_heartbeat
->o2hb_check_slot
->o2hb_run_event_list
->o2hb_fire_callbacks
->down_write(&o2hb_callback_sem)
->o2net_hb_node_down_cb
->flush_workqueue(o2net_wq)
->o2net_process_message
->dlm_query_join_handler
->o2hb_check_node_heartbeating
->o2hb_fill_node_map
->down_read(&o2hb_callback_sem)
No need to take o2hb_callback_sem in dlm_query_join_handler,
o2hb_live_lock is enough to protect live node map.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: xMark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: jiangyiwen <jiangyiwen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Firing quorum before connection established can cause unexpected node to
reboot.
Assume there are 3 nodes in the cluster, Node 1, 2, 3. Node 2 and 3 have
wrong ip address of Node 1 in cluster.conf and global heartbeat is enabled
in the cluster. After the heatbeats are started on these three nodes,
Node 1 will reboot due to quorum fencing. It is similar case if Node 1's
networking is not ready when starting the global heartbeat.
The reboot is not friendly as customer is not fully ready for ocfs2 to
work. Fix it by not allowing firing quorum before the connection is
established. In this case, ocfs2 will wait until the wrong configuration
is fixed or networking is up to continue. Also update the log to guide
the user where to check when connection is not built for a long time.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reduce boilerplate code by using seq_open_private() instead of seq_open()
Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reduce boilerplate code by using seq_open_private() instead of seq_open()
Note that the code in and using sc_common_open() has been quite
extensively changed. Not least because there was a latent memory leak in
the code as was: if sc_common_open() failed, the previously allocated
buffer was not freed.
Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reduce boilerplate code by using seq_open_private() instead of seq_open()
Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the branch that free res->lockname.name because the condition
is never satisfied when jump to label error.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
dlm_lockres_put() should be called without &res->spinlock, otherwise a
deadlock case may happen.
spin_lock(&res->spinlock)
...
dlm_lockres_put
->dlm_lockres_release
->dlm_print_one_lock_resource
->spin_lock(&res->spinlock)
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In o2net_init, if malloc failed, it directly returns -ENOMEM. Then
o2quo_exit won't be called in init_o2nm.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ocfs2_inode_info->ip_clusters and ocfs2_dinode->id1.bitmap1.i_total are
defined as type u32, so the shift left operations may overflow if volume
size is large, for example, 2TB and cluster size is 1MB.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Refactoring error handling in dlm_alloc_ctxt to simplify code.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It is supposed to zero pv_minor.
Reported-by: Himangi Saraogi <himangi774@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Lennox Wu <lennox.wu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
fs/ntfs/debug.c:124: WARNING: space prohibited between function name and
open parenthesis '('
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
