summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-07-25drm/nouveau/gr: disable fifo access and idle before suspend ctx unloadBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-07-25drm/nouveau: pass flag to engine fini() method on suspendBen Skeggs
It may not be necessary to fail in certain cases (such as failing to idle) on module unload, whereas on suspend it's important to ensure a consistent state can be restored on resume. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-07-25drm/nouveau: replace nv04_graph_fifo_access() use with direct reg bashingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-07-25drm/nv40/gr: rewrite/split context takedown functionsBen Skeggs
It's completely pointless to save the PGRAPH context when destroying a channel, so don't bother. This commit should also fix kernel.org bug 39422, where the DRM channel state was incorrectly being saved because we left PGRAPH FIFO access enabled while running the ctxprog. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-07-25drm/nouveau: detect disabled device in irq handler and return IRQ_NONEBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-07-25drm/nouveau: ignore connector type when deciding digital/analog on DVI-IBen Skeggs
If the connector table is lying, which it often does on the boards of a particular manufacturer, we may end up doing the wrong thing. Listen to the encoder table instead, it's more reliable. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-07-25drm/nouveau: Add a quirk for Gigabyte NX86TEmil Velikov
The connector table lies, the card has DVI-I not HDMI Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=35675 v2: Mention the bugreport Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-07-25drm/nouveau: do not leak in nv20_graph_createJesper Juhl
If we return due to an unknown chipset in drivers/gpu/drm/nouveau/nv20_graph.c:nv20_graph_create() we'll leak the memory allocated to 'pgraph'. This patch should fix the leak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-07-25drm/nv50/dp: fix hack to work for macbooks booted via EFIBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-27drm/nouveau: error paths leak in nvc0_graph_construct_context()Dan Carpenter
Two of these error paths returned without freeing "ctx". Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-27drm/nouveau: Calculate reserved VRAM for PRAMIN value before use.Younes Manton
'drm/nouveau: rework vram init/fini ordering a little' changed the order of instmem.init() and nouveau_mem_vram_init() which resulted in using ramin_rsvd_vram before it was calculated and failing to init any accel on pre-NV50 cards. Since it's only used on <NV50 just calculate it where it's needed and leave it as default 0 for NV50. Signed-off-by: Younes Manton <younes.m@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-27drm/nouveau: fix nouveau_vma object leakMarcin Slusarz
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-27drm/nouveau: fix nouveau_mem object leakMarcin Slusarz
It's a regression from "drm/nouveau: create temp vmas for both src and dst of bo moves". Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-27drm/nouveau: fix fetching vbios from above 4GiB vram addressesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: fix off-by-oneBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau/temp: Add default calibration values for nv67Emil Velikov
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau/temp: Fix signed/unsigned int logicEmil Velikov
Many (all?) of the coefficients related to calculating the correct temperature are signed integers This patch correcly parses and stores those values It also ensures that the default offset is 0 (previously 1) Affected cards - the original nv50 and the nv40 family Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nvc0: push prunk140 irq messages to debug loglevelBen Skeggs
We know they happen, we don't know why. They're annoying, so hide them from users for the moment. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: un-blacklist nvce accelBen Skeggs
Reported working on IRC. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: fix null pointer deref on pre-nv50 chipsetsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: rework vram init/fini ordering a littleBen Skeggs
Commit "drm/nouveau: add some debug output if nouveau_mm busy at destroy time" revealed an issue where vram mm takedown would actually fail due to there still being nodes present, causing nouveau to leak a small amount of memory on module unload. This splits TTM/nouveau_mm a bit more cleanly and ensures nouveau_mm fini isn't done until all gpuobjs are also destroyed. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: shut lockdep up if last vm ref needs to destroy pgdBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: fix display takedown order to match reverse init orderBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nvc0: enable per-client address spacesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: add some debug output if nouveau_mm busy at destroy timeBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nv50: enable use of per-client gpu address spaceBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: remove implicit mapping of every bo into chan_vmBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: remove 'chan' argument from nouveau_bo_newBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: fixup gem_info ioctl to return client-specific bo virtualBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nvc0: explicitly map PDISP semaphore buffer into each channel's vmBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nv50-nvc0: lookup pushbuf virtual address on dma_pushBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nv84-nvc0: explicitly map semaphore buffer into channel vmBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nv50-nvc0: explicitly map pushbuf bo into channel vmBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nv50-nvc0: explicitly map notifier bo into channel vmBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nv50-nvc0: explicitly map fbcon fb into channel vmBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: initial changes to support multiple VMAs per buffer objectBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nv50-nvc0: completely disable relocsBen Skeggs
GPU virtual addresses are constant now so this should never be getting hit anyway and userspace shouldn't break from them being ignored. This is being done in preference to teaching the code how to deal with BOs that exist at different virtual addresses within separate VMs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: convert bo.mem.start usage to bo.offsetBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: convert some bo.offset use to vma.offsetBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: create temp vmas for both src and dst of bo movesBen Skeggs
Greatly simplifies a number of things, particularly once per-client GPU address spaces are involved. May add this back later once I know what things'll look like. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: store bo's page size in nouveau_boBen Skeggs
Was previously assuming a page size of 4KiB unless a VMA was present to override it. Eventually, a buffer won't necessarily have a VMA at all at some stages of its life, so we need to store this info elsewhere. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: skip move_notify() if bo does not have a vma attachedBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: will need to specify channel for vm-ful gpuobj allocationsBen Skeggs
Abuses existing gpuobj_new() chan argument for this, which in turn forces all NVOBJ_FLAG_VM allocations to be done from the global heap, not suballocated from the channel's private heap. Not a problem though in practise. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: initialise any vm for a channel before pushbuf/ntfyBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: modify gpuobj/ntfy takedown orderingBen Skeggs
gpuobj really needs splitting into channel/gpuobj code instead... Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau/gem: implement stub hooks for GEM object open/closeBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nouveau: remove 'chan' argument from nouveau_gem_newBen Skeggs
Userspace hasn't passed us a channel_hint for a long long time now, and there isn't actually a need to do so anymore anyway. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nv50-nvc0/chan: inherit vm from fpriv, rather than chan_vm directlyBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nv50-nvc0/vm: take client reference on shared channel vmBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23drm/nv50-nvc0/vm: don't touch chan_vmBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 15:37:46 +0000