| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball:
"MMC highlights for 3.12:
Core:
- Support Allocation Units 8MB-64MB in SD3.0, previous max was 4MB.
- The slot-gpio helper can now handle GPIO debouncing card-detect.
- Read supported voltages from DT "voltage-ranges" property.
Drivers:
- dw_mmc: Add support for ARC architecture, and support exynos5420.
- mmc_spi: Support CD/RO GPIOs.
- sh_mobile_sdhi: Add compatibility for more Renesas SoCs.
- sh_mmcif: Add DT support for DMA channels"
* tag 'mmc-updates-for-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (50 commits)
Revert "mmc: tmio-mmc: Remove .set_pwr() callback from platform data"
mmc: dw_mmc: Add support for ARC
mmc: sdhci-s3c: initialize host->quirks2 for using quirks2
mmc: sdhci-s3c: fix the wrong register value, when clock is disabled
mmc: esdhc: add support to get voltage from device-tree
mmc: sdhci: get voltage from sdhc host
mmc: core: parse voltage from device-tree
mmc: omap_hsmmc: use the generic config for omap2plus devices
mmc: omap_hsmmc: clear status flags before starting a new command
mmc: dw_mmc: exynos: Add a new compatible string for exynos5420
mmc: sh_mmcif: revision-specific CLK_CTRL2 handling
mmc: sh_mmcif: revision-specific Command Completion Signal handling
mmc: sh_mmcif: add support for Device Tree DMA bindings
mmc: sh_mmcif: move header include from header into .c
mmc: SDHI: add DT compatibility strings for further SoCs
mmc: dw_mmc-pci: enable bus-mastering mode
mmc: dw_mmc-pci: get resources from a proper BAR
mmc: tmio-mmc: Remove .set_pwr() callback from platform data
mmc: tmio-mmc: Remove .get_cd() callback from platform data
mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device-mapper updates from Mike Snitzer:
"Add the ability to collect I/O statistics on user-defined regions of a
device-mapper device. This dm-stats code required the reintroduction
of a div64_u64_rem() helper, but as a separate method that doesn't
slow down div64_u64() -- especially on 32-bit systems.
Allow the error target to replace request-based DM devices (e.g.
multipath) in addition to bio-based DM devices.
Various other small code fixes and improvements to thin-provisioning,
DM cache and the DM ioctl interface"
* tag 'dm-3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm stripe: silence a couple sparse warnings
dm: add statistics support
dm thin: always return -ENOSPC if no_free_space is set
dm ioctl: cleanup error handling in table_load
dm ioctl: increase granularity of type_lock when loading table
dm ioctl: prevent rename to empty name or uuid
dm thin: set pool read-only if breaking_sharing fails block allocation
dm thin: prefix pool error messages with pool device name
dm: allow error target to replace bio-based and request-based targets
math64: New separate div64_u64_rem helper
dm space map: optimise sm_ll_dec and sm_ll_inc
dm btree: prefetch child nodes when walking tree for a dm_btree_del
dm btree: use pop_frame in dm_btree_del to cleanup code
dm cache: eliminate holes in cache structure
dm cache: fix stacking of geometry limits
dm thin: fix stacking of geometry limits
dm thin: add data block size limits to Documentation
dm cache: add data block size limits to code and Documentation
dm cache: document metadata device is exclussive to a cache
dm: stop using WQ_NON_REENTRANT
|
|
Pull md update from Neil Brown:
"Headline item is multithreading for RAID5 so that more IO/sec can be
supported on fast (SSD) devices. Also TILE-Gx SIMD suppor for RAID6
calculations and an assortment of bug fixes"
* tag 'md/3.12' of git://neil.brown.name/md:
raid5: only wakeup necessary threads
md/raid5: flush out all pending requests before proceeding with reshape.
md/raid5: use seqcount to protect access to shape in make_request.
raid5: sysfs entry to control worker thread number
raid5: offload stripe handle to workqueue
raid5: fix stripe release order
raid5: make release_stripe lockless
md: avoid deadlock when dirty buffers during md_stop.
md: Don't test all of mddev->flags at once.
md: Fix apparent cut-and-paste error in super_90_validate
raid6/test: replace echo -e with printf
RAID: add tilegx SIMD implementation of raid6
md: fix safe_mode buglet.
md: don't call md_allow_write in get_bitmap_file.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile 3 (of many) from Al Viro:
"Waiman's conversion of d_path() and bits related to it,
kern_path_mountpoint(), several cleanups and fixes (exportfs
one is -stable fodder, IMO).
There definitely will be more... ;-/"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
split read_seqretry_or_unlock(), convert d_walk() to resulting primitives
dcache: Translating dentry into pathname without taking rename_lock
autofs4 - fix device ioctl mount lookup
introduce kern_path_mountpoint()
rename user_path_umountat() to user_path_mountpoint_at()
take unlazy_walk() into umount_lookup_last()
Kill indirect include of file.h from eventfd.h, use fdget() in cgroup.c
prune_super(): sb->s_op is never NULL
exportfs: don't assume that ->iterate() won't feed us too long entries
afs: get rid of redundant ->d_name.len checks
|
|
When I moved the RCU walk termination into unlazy_walk(), I didn't copy
quite all of it: for the successful RCU termination we properly add the
necessary reference counts to our temporary copy of the root path, but
for the failure case we need to make sure that any temporary root path
information is cleared out (since it does _not_ have the proper
reference counts from the RCU lookup).
We could clean up this mess by just always dropping the temporary root
information, but Al points out that that would mean that a single lookup
through symlinks could see multiple different root entries if it races
with another thread doing chroot. Not that I think we should really
care (we had that before too, back before we had a copy of the root path
in the nameidata).
Al says he has a cunning plan. In the meantime, this is the minimal fix
for the problem, even if it's not all that pretty.
Reported-by: Mace Moneta <moneta.mace@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine
Pull dmaengine update from Dan Williams:
"Collection of random updates to the core and some end-driver fixups
for ioatdma and mv_xor:
- NUMA aware channel allocation
- Cleanup dmatest debugfs interface
- ioat: make raid-support Atom only
- mv_xor: big endian
Aside from the top three commits these have all had some soak time in
-next. The top commit fixes a recent build breakage.
It has been a long while since my last pull request, hopefully it does
not show. Thanks to Vinod for keeping an eye on drivers/dma/ this
past year"
* tag 'dmaengine-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
dmaengine: dma_sync_wait and dma_find_channel undefined
MAINTAINERS: update email for Dan Williams
dma: mv_xor: Fix incorrect error path
ioatdma: silence GCC warnings
dmaengine: make dma_channel_rebalance() NUMA aware
dmaengine: make dma_submit_error() return an error code
ioatdma: disable RAID on non-Atom platforms and reenable unaligned copies
mv_xor: support big endian systems using descriptor swap feature
mv_xor: use {readl, writel}_relaxed instead of __raw_{readl, writel}
dmatest: print message on debug level in case of no error
dmatest: remove IS_ERR_OR_NULL checks of debugfs calls
dmatest: make module parameters writable
|
|
dma_sync_wait and dma_find_channel are declared regardless of whether
CONFIG_DMA_ENGINE is enabled, but calling the function without
CONFIG_DMA_ENGINE enabled results "undefined reference" errors.
To get around this, declare dma_sync_wait and dma_find_channel as inline
functions if CONFIG_DMA_ENGINE is undefined.
Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late changes from Kevin Hilman:
"These are changes that arrived a little late before the merge window,
or had dependencies on previous branches.
Highlights:
- ux500: misc. cleanup, fixup I2C devices
- exynos: DT updates for RTC; PM updates
- at91: DT updates for NAND; new platforms added to generic defconfig
- sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks
- highbank: LPAE fixes, select necessary ARM errata
- omap: PM fixes and improvements; OMAP5 mailbox support
- omap: basic support for new DRA7xx SoCs"
* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
ARM: dts: vexpress: Add CCI node to TC2 device-tree
ARM: EXYNOS: Skip C1 cpuidle state for exynos5440
ARM: EXYNOS: always enable PM domains support for EXYNOS4X12
ARM: highbank: clean-up some unused includes
ARM: sun7i: Enable the A20 clocks in the DTSI
ARM: sun6i: Enable clock support in the DTSI
ARM: sun5i: dt: Use the A10s gates in the DTSI
ARM: at91: at91_dt_defconfig: enable rm9200 support
ARM: dts: add ADC device tree node for exynos5420/5250
ARM: dts: Add RTC DT node to Exynos5420 SoC
ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC
ARM: dts: Fix the RTC DT node name for Exynos5250
irqchip: mmp: avoid to include irqs head file
ARM: mmp: avoid to include head file in mach-mmp
irqchip: mmp: support irqchip
irqchip: move mmp irq driver
ARM: OMAP: AM33xx: clock: Add RNG clock data
ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX
ARM: OMAP4: clock: Lock PLLs in the right sequence
ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman:
"Lots of cleanup and refactoring and some SMP additions for Renesas
platforms. Due to some inter-dependencies with other arm-soc
branches, this Renesas stuff was separated out for sending after the
other branches were merged.
Highlights:
- remove unused board support and cleanup of unused headers
- refactoring of init and device registration
- simplify IRQ initialization"
* tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs
ARM: shmobile: Introduce per-CPU SMP boot / sleep code
ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779
ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0
ARM: shmobile: Add shared SCU CPU Hotplug code
ARM: shmobile: Use shared SCU SMP boot code on emev2
ARM: shmobile: Use shared SCU SMP boot code on r8a7779
ARM: shmobile: Use shared SCU SMP boot code on sh73a0
ARM: shmobile: Introduce shared SCU SMP boot code
ARM: shmobile: sh73a0: Remove global GPIO_NR definition
ARM: shmobile: kzm9d: remove nfsroot settings from bootargs
ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs
ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup
ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup
ARM: shmobile: bockw: add missing __initdata
ARM: shmobile: r8a7790: add missing __initdata
ARM: shmobile: r8a7779: add missing __initdata
ARM: shmobile: Remove unused shmobile_init_time()
ARM: shmobile: Use clocksource_of_init() on r8a7790
ARM: shmobile: Use default ->init_time() on KZM9G DT ref
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver update from Kevin Hilman:
"This contains the ARM SoC related driver updates for v3.12. The only
thing this cycle are core PM updates and CPUidle support for ARM's TC2
big.LITTLE development platform"
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver
ARM: vexpress: tc2: disable GIC CPU IF in tc2_pm_suspend
drivers: irq-chip: irq-gic: introduce gic_cpu_if_down()
|
|
Pull clock framework changes from Michael Turquette:
"The common clk framework changes for 3.12 are dominated by clock
driver patches, both new drivers and fixes to existing. A high
percentage of these are for Samsung platforms like Exynos. Core
framework fixes and some new features like automagical clock
re-parenting round out the patches"
* tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linux: (102 commits)
clk: only call get_parent if there is one
clk: samsung: exynos5250: Simplify registration of PLL rate tables
clk: samsung: exynos4: Register PLL rate tables for Exynos4x12
clk: samsung: exynos4: Register PLL rate tables for Exynos4210
clk: samsung: exynos4: Reorder registration of mout_vpllsrc
clk: samsung: pll: Add support for rate configuration of PLL46xx
clk: samsung: pll: Use new registration method for PLL46xx
clk: samsung: pll: Add support for rate configuration of PLL45xx
clk: samsung: pll: Use new registration method for PLL45xx
clk: samsung: exynos4: Rename exynos4_plls to exynos4x12_plls
clk: samsung: exynos4: Remove checks for DT node
clk: samsung: exynos4: Remove unused static clkdev aliases
clk: samsung: Modify _get_rate() helper to use __clk_lookup()
clk: samsung: exynos4: Use separate aliases for cpufreq related clocks
clocksource: samsung_pwm_timer: Get clock from device tree
ARM: dts: exynos4: Specify PWM clocks in PWM node
pwm: samsung: Update DT bindings documentation to cover clocks
clk: Move symbol export to proper location
clk: fix new_parent dereference before null check
clk: wm831x: Initialise wm831x pointer on init
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Not much changes for the 3.12 merge window. The major tracing changes
are still in flux, and will have to wait for 3.13.
The changes for 3.12 are mostly clean ups and minor fixes.
H Peter Anvin added a check to x86_32 static function tracing that
helps a small segment of the kernel community.
Oleg Nesterov had a few changes from 3.11, but were mostly clean ups
and not worth pushing in the -rc time frame.
Li Zefan had small clean up with annotating a raw_init with __init.
I fixed a slight race in updating function callbacks, but the race is
so small and the bug that happens when it occurs is so minor it's not
even worth pushing to stable.
The only real enhancement is from Alexander Z Lam that made the
tracing_cpumask work for trace buffer instances, instead of them all
sharing a global cpumask"
* tag 'trace-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/rcu: Do not trace debug_lockdep_rcu_enabled()
x86-32, ftrace: Fix static ftrace when early microcode is enabled
ftrace: Fix a slight race in modifying what function callback gets traced
tracing: Make tracing_cpumask available for all instances
tracing: Kill the !CONFIG_MODULES code in trace_events.c
tracing: Don't pass file_operations array to event_create_dir()
tracing: Kill trace_create_file_ops() and friends
tracing/syscalls: Annotate raw_init function with __init
|
|
In __clk_init(), after a clock is mostly initialized, a scan is done
of the orphan clocks to see if the clock being registered is the
parent of any of them.
This code assumes that any clock that provides a get_parent method
actually has at least one parent, and that's not a valid assumption.
As a result, an orphan clock with no parent can return *something*
as the parent index, and that value is blindly used to dereference
the orphan's parent_names[] array (which will be ZERO_SIZE_PTR or
NULL).
Fix this by ensuring get_parent is only called for orphans with at
least one parent.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
|
|
Separate "check if we need to retry" from "unlock if we are done and
had seq_writelock"; that allows to use these guys in d_walk(), where
we need to recheck every time we ascend back to parent, but do *not*
want to unlock until the very end. Lift rcu_read_lock/rcu_read_unlock
out into callers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull xfs updates from Ben Myers:
"For 3.12-rc1 there are a number of bugfixes in addition to work to
ease usage of shared code between libxfs and the kernel, the rest of
the work to enable project and group quotas to be used simultaneously,
performance optimisations in the log and the CIL, directory entry file
type support, fixes for log space reservations, some spelling/grammar
cleanups, and the addition of user namespace support.
- introduce readahead to log recovery
- add directory entry file type support
- fix a number of spelling errors in comments
- introduce new Q_XGETQSTATV quotactl for project quotas
- add USER_NS support
- log space reservation rework
- CIL optimisations
- kernel/userspace libxfs rework"
* tag 'xfs-for-linus-v3.12-rc1' of git://oss.sgi.com/xfs/xfs: (112 commits)
xfs: XFS_MOUNT_QUOTA_ALL needed by userspace
xfs: dtype changed xfs_dir2_sfe_put_ino to xfs_dir3_sfe_put_ino
Fix wrong flag ASSERT in xfs_attr_shortform_getvalue
xfs: finish removing IOP_* macros.
xfs: inode log reservations are too small
xfs: check correct status variable for xfs_inobt_get_rec() call
xfs: inode buffers may not be valid during recovery readahead
xfs: check LSN ordering for v5 superblocks during recovery
xfs: btree block LSN escaping to disk uninitialised
XFS: Assertion failed: first <= last && last < BBTOB(bp->b_length), file: fs/xfs/xfs_trans_buf.c, line: 568
xfs: fix bad dquot buffer size in log recovery readahead
xfs: don't account buffer cancellation during log recovery readahead
xfs: check for underflow in xfs_iformat_fork()
xfs: xfs_dir3_sfe_put_ino can be static
xfs: introduce object readahead to log recovery
xfs: Simplify xfs_ail_min() with list_first_entry_or_null()
xfs: Register hotcpu notifier after initialization
xfs: add xfs sb v4 support for dirent filetype field
xfs: Add write support for dirent filetype field
xfs: Add read-only support for dirent filetype field
...
|
|
Not using the return value can in the generic case be racy, so it's
in general good practice to check the return value instead.
This also resolved the warning caused on ARM and other architectures:
fs/direct-io.c: In function 'sb_init_dio_done_wq':
fs/direct-io.c:557:2: warning: value computed is not used [-Wunused-value]
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: H Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When running the AIM7's short workload, Linus' lockref patch eliminated
most of the spinlock contention. However, there were still some left:
8.46% reaim [kernel.kallsyms] [k] _raw_spin_lock
|--42.21%-- d_path
| proc_pid_readlink
| SyS_readlinkat
| SyS_readlink
| system_call
| __GI___readlink
|
|--40.97%-- sys_getcwd
| system_call
| __getcwd
The big one here is the rename_lock (seqlock) contention in d_path()
and the getcwd system call. This patch will eliminate the need to take
the rename_lock while translating dentries into the full pathnames.
The need to take the rename_lock is to make sure that no rename
operation can be ongoing while the translation is in progress. However,
only one thread can take the rename_lock thus blocking all the other
threads that need it even though the translation process won't make
any change to the dentries.
This patch will replace the writer's write_seqlock/write_sequnlock
sequence of the rename_lock of the callers of the prepend_path() and
__dentry_path() functions with the reader's read_seqbegin/read_seqretry
sequence within these 2 functions. As a result, the code will have to
retry if one or more rename operations had been performed. In addition,
RCU read lock will be taken during the translation process to make sure
that no dentries will go away. To prevent live-lock from happening,
the code will switch back to take the rename_lock if read_seqretry()
fails for three times.
To further reduce spinlock contention, this patch does not take the
dentry's d_lock when copying the filename from the dentries. Instead,
it treats the name pointer and length as unreliable and just copy
the string byte-by-byte over until it hits a null byte or the end of
string as specified by the length. This should avoid stepping into
invalid memory address. The error cases are left to be handled by
the sequence number check.
The following code re-factoring are also made:
1. Move prepend('/') into prepend_name() to remove one conditional
check.
2. Move the global root check in prepend_path() back to the top of
the while loop.
With this patch, the _raw_spin_lock will now account for only 1.2%
of the total CPU cycles for the short workload. This patch also has
the effect of reducing the effect of running perf on its profile
since the perf command itself can be a heavy user of the d_path()
function depending on the complexity of the workload.
When taking the perf profile of the high-systime workload, the amount
of spinlock contention contributed by running perf without this patch
was about 16%. With this patch, the spinlock contention caused by
the running of perf will go away and we will have a more accurate
perf profile.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull mtd updates from David Woodhouse:
- factor out common code from MTD tests
- nand-gpio cleanup and portability to non-ARM
- m25p80 support for 4-byte addressing chips, other new chips
- pxa3xx cleanup and support for new platforms
- remove obsolete alauda, octagon-5066 drivers
- erase/write support for bcm47xxsflash
- improve detection of ECC requirements for NAND, controller setup
- NFC acceleration support for atmel-nand, read/write via SRAM
- etc
* tag 'for-linus-20130909' of git://git.infradead.org/linux-mtd: (184 commits)
mtd: chips: Add support for PMC SPI Flash chips in m25p80.c
mtd: ofpart: use for_each_child_of_node() macro
mtd: mtdswap: replace strict_strtoul() with kstrtoul()
mtd cs553x_nand: use kzalloc() instead of memset
mtd: atmel_nand: fix error return code in atmel_nand_probe()
mtd: bcm47xxsflash: writing support
mtd: bcm47xxsflash: implement erasing support
mtd: bcm47xxsflash: convert to module_platform_driver instead of init/exit
mtd: bcm47xxsflash: convert kzalloc to avoid invalid access
mtd: remove alauda driver
mtd: nand: mxc_nand: mark 'const' properly
mtd: maps: cfi_flagadm: add missing __iomem annotation
mtd: spear_smi: add missing __iomem annotation
mtd: r852: Staticize local symbols
mtd: nandsim: Staticize local symbols
mtd: impa7: add missing __iomem annotation
mtd: sm_ftl: Staticize local symbols
mtd: m25p80: add support for mr25h10
mtd: m25p80: make CONFIG_M25PXX_USE_FAST_READ safe to enable
mtd: m25p80: Pass flags through CAT25_INFO macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Stefan Richter:
- Fix a regression since 3.2 inclusive: The subsystem workqueue
deadlocked between transaction completion handling and bus reset
handling if the worker pool could not be increased in time.
- janitorial updates
* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: Fix deadlock at bus reset
firewire: ohci: Change module_pci_driver to module_init/module_exit
firewire: ohci: beautify some macro definitions
firewire: ohci: change confusing name of a struct member
firewire: core: typecast from gfp_t to bool more safely
firewire: WQ_NON_REENTRANT is meaningless and going away
|
|
Returned to intel.com
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jon Mason <jon.mason@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull DMA mapping update from Marek Szyprowski:
"This contains an addition of Device Tree support for reserved memory
regions (Contiguous Memory Allocator is one of the drivers for it) and
changes required by the KVM extensions for PowerPC architectue"
* 'for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: init: add support for reserved memory defined by device tree
drivers: of: add initialization code for dma reserved memory
drivers: of: add function to scan fdt nodes given by path
drivers: dma-contiguous: clean source code and prepare for device tree
|
|
Return directly if memory allocation fails. There is no need
of dma_free_coherent().
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio update from Rusty Russell:
"More console fixes; these are the theoretical ones which didn't get
CC:stable. But for that reason, I did a merge with master partway
through to avoid an unnecessary conflict.
Also: a fun lguest bug turns out if you don't clear the TF flag when
trapping Bad Things happen to the guest kernel as the stack
overflows..."
* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio_pci: pm: Use CONFIG_PM_SLEEP instead of CONFIG_PM
lguest: fix GPF in guest when using gdb.
lguest: fix guest kernel stack overflow when TF bit set.
lguest: fix BUG_ON() in invalid guest page table.
virtio: console: prevent use-after-free of port name in port unplug
virtio: console: cleanup an error message
virtio: console: fix locking around send_sigio_to_port()
virtio: console: add locking in port unplug path
virtio: console: add locks around buffer removal in port unplug path
tools/lguest: offer VIRTIO_F_ANY_LAYOUT for net device.
virtio tools: add .gitignore
lguest: Point to the right directory for the lguest launcher
|
|
Pull VFIO update from Alex Williamson:
"VFIO updates include safer default file flags for VFIO device fds, an
external user interface exported to allow other modules to hold
references to VFIO groups, a fix to test for extended config space on
PCIe and PCI-x, and new hot reset interfaces for PCI devices which
allows the user to do PCI bus/slot resets when all of the devices
affected by the reset are owned by the user.
For this last feature, the PCI bus reset interface, I depend on
changes already merged from Bjorn's PCI pull request. I therefore
merged my tree up to commit cb3e433, which I think was the correct
action, but as Stephen Rothwell noted, I failed to provide a commit
message indicating why the merge was required. Sorry for that.
Thanks, Alex"
* tag 'vfio-v3.12-rc0' of git://github.com/awilliam/linux-vfio:
vfio: fix documentation
vfio-pci: PCI hot reset interface
vfio-pci: Test for extended config space
vfio-pci: Use fdget() rather than eventfd_fget()
vfio: Add O_CLOEXEC flag to vfio device fd
vfio: use get_unused_fd_flags(0) instead of get_unused_fd()
vfio: add external user support
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- Fix NFSv4 recovery so that it doesn't recover lost locks in cases
such as lease loss due to a network partition, where doing so may
result in data corruption. Add a kernel parameter to control
choice of legacy behaviour or not.
- Performance improvements when 2 processes are writing to the same
file.
- Flush data to disk when an RPCSEC_GSS session timeout is imminent.
- Implement NFSv4.1 SP4_MACH_CRED state protection to prevent other
NFS clients from being able to manipulate our lease and file
locking state.
- Allow sharing of RPCSEC_GSS caches between different rpc clients.
- Fix the broken NFSv4 security auto-negotiation between client and
server.
- Fix rmdir() to wait for outstanding sillyrename unlinks to complete
- Add a tracepoint framework for debugging NFSv4 state recovery
issues.
- Add tracing to the generic NFS layer.
- Add tracing for the SUNRPC socket connection state.
- Clean up the rpc_pipefs mount/umount event management.
- Merge more patches from Chuck in preparation for NFSv4 migration
support"
* tag 'nfs-for-3.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (107 commits)
NFSv4: use mach cred for SECINFO_NO_NAME w/ integrity
NFS: nfs_compare_super shouldn't check the auth flavour unless 'sec=' was set
NFSv4: Allow security autonegotiation for submounts
NFSv4: Disallow security negotiation for lookups when 'sec=' is specified
NFSv4: Fix security auto-negotiation
NFS: Clean up nfs_parse_security_flavors()
NFS: Clean up the auth flavour array mess
NFSv4.1 Use MDS auth flavor for data server connection
NFS: Don't check lock owner compatability unless file is locked (part 2)
NFS: Don't check lock owner compatibility in writes unless file is locked
nfs4: Map NFS4ERR_WRONG_CRED to EPERM
nfs4.1: Add SP4_MACH_CRED write and commit support
nfs4.1: Add SP4_MACH_CRED stateid support
nfs4.1: Add SP4_MACH_CRED secinfo support
nfs4.1: Add SP4_MACH_CRED cleanup support
nfs4.1: Add state protection handler
nfs4.1: Minimal SP4_MACH_CRED implementation
SUNRPC: Replace pointer values with task->tk_pid and rpc_clnt->cl_clid
SUNRPC: Add an identifier for struct rpc_clnt
SUNRPC: Ensure rpc_task->tk_pid is available for tracepoints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse bugfixes from Miklos Szeredi:
"Just a bunch of bugfixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: use list_for_each_entry() for list traversing
fuse: readdir: check for slash in names
fuse: hotfix truncate_pagecache() issue
fuse: invalidate inode attributes on xattr modification
fuse: postpone end_page_writeback() in fuse_writepage_locked()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull GFS2 updates from Steven Whitehouse:
"This is possibly the smallest ever set of GFS2 patches for a merge
window. Also, most of them are bug fixes this time.
Two of my three patches (moving gfs2_sync_meta and merging the two
writepage implementations) are clean ups with the third (taking the
glock ref in examine_bucket) being a fix for a difficult to hit race
condition.
The removal of an unused memory barrier is a clean up from Bob
Peterson, and the "spectator" relates to a rarely used mount option.
Ben Marzinski's patch fixes a corner case where the incorrect inode
flags were being set, resulting in incorrect behaviour on fsync"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: dirty inode correctly in gfs2_write_end
GFS2: Don't flag consistency error if first mounter is a spectator
GFS2: Remove unnecessary memory barrier
GFS2: Merge ordered and writeback writepage
GFS2: Take glock reference in examine_bucket()
GFS2: Move gfs2_sync_meta to lops.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull ceph updates from Sage Weil:
"This includes both the first pile of Ceph patches (which I sent to
torvalds@vger, sigh) and a few new patches that add support for
fscache for Ceph. That includes a few fscache core fixes that David
Howells asked go through the Ceph tree. (Thanks go to Milosz Tanski
for putting this feature together)
This first batch of patches (included here) had (has) several
important RBD bug fixes, hole punch support, several different
cleanups in the page cache interactions, improvements in the truncate
code (new truncate mutex to avoid shenanigans with i_mutex), and a
series of fixes in the synchronous striping read/write code.
On top of that is a random collection of small fixes all across the
tree (error code checks and error path cleanup, obsolete wq flags,
etc)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (43 commits)
ceph: use d_invalidate() to invalidate aliases
ceph: remove ceph_lookup_inode()
ceph: trivial buildbot warnings fix
ceph: Do not do invalidate if the filesystem is mounted nofsc
ceph: page still marked private_2
ceph: ceph_readpage_to_fscache didn't check if marked
ceph: clean PgPrivate2 on returning from readpages
ceph: use fscache as a local presisent cache
fscache: Netfs function for cleanup post readpages
FS-Cache: Fix heading in documentation
CacheFiles: Implement interface to check cache consistency
FS-Cache: Add interface to check consistency of a cached object
rbd: fix null dereference in dout
rbd: fix buffer size for writes to images with snapshots
libceph: use pg_num_mask instead of pgp_num_mask for pg.seed calc
rbd: fix I/O error propagation for reads
ceph: use vfs __set_page_dirty_nobuffers interface instead of doing it inside filesystem
ceph: allow sync_read/write return partial successed size of read/write.
ceph: fix bugs about handling short-read for sync read mode.
ceph: remove useless variable revoked_rdcache
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull metag architecture changes from James Hogan:
- Device tree updates for TZ1090 GPIO drivers merged via GPIO tree.
- Add driver for ImgTec PDC irqchip as found in TZ1090 SoC.
- Add linux-metag mailing list to MAINTAINERS file.
* tag 'metag-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
irq-imgpdc: add ImgTec PDC irqchip driver
MAINTAINERS: add linux-metag mailing list
metag: tz1090: instantiate gpio-tz1090-pdc
metag: tz1090: select and instantiate gpio-tz1090
metag: tz1090: select and instantiate irq-imgpdc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC changes from Vineet Gupta:
- ARC MM changes:
- preparation for MMUv4 (accomodate new PTE bits, new cmds)
- Rework the ASID allocation algorithm to remove asid-mm reverse map
- Boilerplate code consolidation in Exception Handlers
- Disable FRAME_POINTER for ARC
- Unaligned Access Emulation for Big-Endian from Noam
- Bunch of fixes (udelay, missing accessors) from Mischa
* tag 'arc-v3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: fix new Section mismatches in build (post __cpuinit cleanup)
Kconfig.debug: Add FRAME_POINTER anti-dependency for ARC
ARC: Fix __udelay calculation
ARC: remove console_verbose() from setup_arch()
ARC: Add read*_relaxed to asm/io.h
ARC: Handle un-aligned user space access in BE.
ARC: [ASID] Track ASID allocation cycles/generations
ARC: [ASID] activate_mm() == switch_mm()
ARC: [ASID] get_new_mmu_context() to conditionally allocate new ASID
ARC: [ASID] Refactor the TLB paranoid debug code
ARC: [ASID] Remove legacy/unused debug code
ARC: No need to flush the TLB in early boot
ARC: MMUv4 preps/3 - Abstract out TLB Insert/Delete
ARC: MMUv4 preps/2 - Reshuffle PTE bits
ARC: MMUv4 preps/1 - Fold PTE K/U access flags
ARC: Code cosmetics (Nothing semantical)
ARC: Entry Handler tweaks: Optimize away redundant IRQ_DISABLE_SAVE
ARC: Exception Handlers Code consolidation
ARC: Add some .gitignore entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fixes from Greg Ungerer:
"Just a small collection of cleanups and fixes this time, no big
changes. The most interresting are to make the m68k and m68knommu
consistently use CONFIG_IOMAP, clean out some unused board config
options and flush the cache on signal stack creation"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: remove 16 unused boards in Kconfig.machine
m68k: define 'VM_DATA_DEFAULT_FLAGS' no matter whether has 'NOMMU' or not
m68knommu: user generic iomap to support ioread*/iowrite*
m68k/coldfire: flush cache when creating the signal stack frame
m68knommu: Mark functions only called from setup_arch() __init
|
|
Pull UML updates from Richard Weinberger:
"This pile contains mostly fixes and improvements for issues identified
by Richard W M Jones while adding UML as backend to libguestfs"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Add irq chip um/mask handlers
um: prctl: Do not include linux/ptrace.h
um: Run UML in it's own session.
um: Cleanup SIGTERM handling
um: ubd: Introduce submit_request()
um: ubd: Add REQ_FLUSH suppport
um: Implement probe_kernel_read()
um: hostfs: Fix writeback
|
|
When reconnecting to automounts at startup an autofs ioctl is used
to find the device and inode of existing mounts so they can be used
to open a file descriptor of possibly covered mounts.
At this time the the caller might not yet "own" the mount so it can
trigger calling ->d_automount(). This causes automount to hang when
trying to reconnect to direct or offset mount types.
Consequently kern_path() can't be used but kern_path_mountpoint() can be.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This is the fix that the last two commits indirectly led up to - making
sure that we don't call dput() in a bad context on the dentries we've
looked up in RCU mode after the sequence count validation fails.
This basically expands d_rcu_to_refcount() into the callers, and then
fixes the callers to delay the dput() in the failure case until _after_
we've dropped all locks and are no longer in an RCU-locked region.
The case of 'complete_walk()' was trivial, since its failure case did
the unlock_rcu_walk() directly after the call to d_rcu_to_refcount(),
and as such that is just a pure expansion of the function with a trivial
movement of the resulting dput() to after 'unlock_rcu_walk()'.
In contrast, the unlazy_walk() case was much more complicated, because
not only does convert two different dentries from RCU to be reference
counted, but it used to not call unlock_rcu_walk() at all, and instead
just returned an error and let the caller clean everything up in
"terminate_walk()".
Happily, one of the dentries in question (called "parent" inside
unlazy_walk()) is the dentry of "nd->path", which terminate_walk() wants
a refcount to anyway for the non-RCU case.
So what the new and improved unlazy_walk() does is to first turn that
dentry into a refcounted one, and once that is set up, the error cases
can continue to use the terminate_walk() helper for cleanup, but for the
non-RCU case. Which makes it possible to drop out of RCU mode if we
actually hit the sequence number failure case.
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The virtio_pci_freeze/restore are defined under CONFIG_PM but is used
by SET_SYSTEM_SLEEP_PM_OPS macro, which is defined under
CONFIG_PM_SLEEP. So if CONFIG_PM_SLEEP is not cofigured but
CONFIG_PM_RUNTIME is, the following warning message appeared:
drivers/virtio/virtio_pci.c:770:12: warning: ‘virtio_pci_freeze’ defined but not used [-Wunused-function]
static int virtio_pci_freeze(struct device *dev)
^
drivers/virtio/virtio_pci.c:790:12: warning: ‘virtio_pci_restore’ defined but not used [-Wunused-function]
static int virtio_pci_restore(struct device *dev)
^
Fix it by changing CONFIG_PM to CONFIG_PM_SLEEP.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and move the extern from linux/namei.h to fs/internal.h,
along with that of vfs_path_lookup().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and massage it a bit to reduce nesting
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This simplifies the RCU to refcounting code in particular.
I was originally intending to leave this for later, but walking through
all the dput() logic (see previous commit), I realized that the dput()
"might_sleep()" check was misleadingly weak. And I removed it as
misleading, both for performance profiling and for debugging.
However, the might_sleep() debugging case is actually true: the final
dput() can indeed sleep, if the inode of the dentry that you are
releasing ends up sleeping at iput time (see dentry_iput()). So the
problem with the might_sleep() in dput() wasn't that it wasn't true, it
was that it wasn't actually testing and triggering on the interesting
case.
In particular, just about *any* dput() can indeed sleep, if you happen
to race with another thread deleting the file in question, and you then
lose the race to the be the last dput() for that file. But because it's
a very rare race, the debugging code would never trigger it in practice.
Why is this problematic? The new d_rcu_to_refcount() (see commit
15570086b590: "vfs: reimplement d_rcu_to_refcount() using
lockref_get_or_lock()") does a dput() for the failure case, and it does
it under the RCU lock. So potentially sleeping really is a bug.
But there's no way I'm going to fix this with the previous complicated
"lockref_get_or_lock()" interface. And rather than revert to the old
and crufty nested dentry locking code (which did get this right by
delaying the reference count updates until they were verified to be
safe), let's make forward progress.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is me being a bit OCD after all the dentry optimization work this
merge window: profiles end up showing 'dput()' as a rather expensive
operation, and there were two unrelated bad reasons for that.
The first reason was reading d_lockref.count for debugging purposes,
which touches the lockref cacheline (for reads) before really need to.
More importantly, the debugging test in question is _wrong_, and has
hidden bugs. It's true that we can only sleep when the count goes down
to zero, but the test as-is hides the much more subtle bug that happens
if we race with somebody else deleting the file.
Anyway we _will_ touch that cacheline, but let's do it for a write and
in the right routine (ie in "lockref_put_or_lock()") which annotates the
costs better. So remove the misleading debug code.
The other was an unnecessary access to the cacheline that contains the
d_lru list, just to check whether we already were on the LRU list or
not. This is exactly what we have d_flags for, so that we can avoid
touching extra cache lines for the common case. So just add another bit
for "is this dentry on the LRU".
Finally, mark the tests properly likely/unlikely, so that the common
fast-paths are dense in the instruction stream.
This makes the profiles look much saner.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull NVM Express driver update from Matthew Wilcox.
* git://git.infradead.org/users/willy/linux-nvme:
NVMe: Merge issue on character device bring-up
NVMe: Handle ioremap failure
NVMe: Add pci suspend/resume driver callbacks
NVMe: Use normal shutdown
NVMe: Separate controller init from disk discovery
NVMe: Separate queue alloc/free from create/delete
NVMe: Group pci related actions in functions
NVMe: Disk stats for read/write commands only
NVMe: Bring up cdev on set feature failure
NVMe: Fix checkpatch issues
NVMe: Namespace IDs are unsigned
NVMe: Update nvme_id_power_state with latest spec
NVMe: Split header file into user-visible and kernel-visible pieces
NVMe: Call nvme_process_cq from submission path
NVMe: Remove "process_cq did something" message
NVMe: Return correct value from interrupt handler
NVMe: Disk IO statistics
NVMe: Restructure MSI / MSI-X setup
NVMe: Use kzalloc instead of kmalloc+memset
|
|
Pull NTB (non-transparent bridge) updates from Jon Mason:
"NTB driver bug fixes to address issues in NTB-RP enablement, spad,
debugfs, and USD/DSD identification.
Add a workaround on Xeon NTB devices for b2bdoorbell errata. Also,
add new NTB driver features to support 32bit x86, DMA engine support,
and NTB-RP support.
Finally, a few clean-ups and update to MAINTAINERS for the NTB git
tree and wiki location"
* tag 'ntb-3.12' of git://github.com/jonmason/ntb:
ntb: clean up unnecessary MSI/MSI-X capability find
MAINTAINERS: Add Website and Git Tree for NTB
NTB: Update Version
NTB: Comment Fix
NTB: Remove unused variable
NTB: Remove References of non-B2B BWD HW
NTB: NTB-RP support
NTB: Rename Variables for NTB-RP
NTB: Use DMA Engine to Transmit and Receive
NTB: Enable 32bit Support
NTB: Update Device IDs
NTB: BWD Link Recovery
NTB: Xeon Errata Workaround
NTB: Correct debugfs to work with more than 1 NTB Device
NTB: Correct USD/DSD Identification
NTB: Correct Number of Scratch Pad Registers
NTB: Add Error Handling in ntb_device_setup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next
Pull MFD (multi-function device) updates from Samuel Ortiz:
"For the 3.12 merge window we have one new driver for the DA9063 PMIC
from Dialog Semiconductor.
Besides that driver we also have:
- Device tree support for the s2mps11 driver
- More devm_* conversion for the pm8921, max89xx, menelaus, tps65010,
wl1273 and pcf50633-adc drivers.
- A conversion to threaded IRQ and IRQ domain for the twl6030 driver.
- A fairly big update for the rtsx driver: Better power saving
support, better vendor settings handling, and a few fixes.
- Support for a couple more boards (COMe-bHL6 and COMe-cTH6) for the
Kontron driver.
- A conversion to the dev_get_platdata() API for all MFD drivers.
- A removal of non-DT (legacy) support for the twl6040 driver.
- A few fixes and additions (Mic detect level) to the wm5110 register
tables.
- Regmap support for the davinci_voicecodec driver.
- The usual bunch of minor cleanups and janitorial fixes"
* tag 'mfd-3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (81 commits)
mfd: ucb1x00-core: Rewrite ucb1x00_add_dev()
mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for event name
mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for sysfs
mfd: timberdale: Use module_pci_driver
mfd: timberdale: Remove redundant break
mfd: timberdale: Staticize local variables
mfd: ab8500-debugfs: Staticize local variables
mfd: db8500-prcmu: Staticize clk_mgt
mfd: db8500-prcmu: Use ANSI function declaration
mfd: omap-usb-host: Staticize usbhs_driver_name
mfd: 88pm805: Fix potential NULL pdata dereference
mfd: 88pm800: Fix potential NULL pdata dereference
mfd: twl6040: Use regmap for register cache
mfd: davinci_voicecodec: Provide a regmap for register I/O
mfd: davinci_voicecodec: Remove unused read and write functions
mmc: memstick: rtsx: Modify copyright comments
mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage fail
mfd: mmc: rtsx: Change default tx phase
mfd: pcf50633-adc: Use devm_*() functions
mfd: rtsx: Copyright modifications
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:
"In the kbuild misc branch, I have:
- make rpm-pkg updates, most importantly the rpm package now calls
/sbin/installkernel
- make deb-pkg: debuginfo split, correct kernel image path for
parisc, mips and powerpc and a couple more minor fixes
- New coccinelle check"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/checkkconfigsymbols.sh: replace echo -e with printf
Provide version number for Debian firmware package
coccinelle: replace 0/1 with false/true in functions returning bool
deb-pkg: add a hook argument to match debian hooks parameters
deb-pkg: fix installed image path on parisc, mips and powerpc
deb-pkg: split debug symbols in their own package
deb-pkg: use KCONFIG_CONFIG instead of .config file directly
rpm-pkg: add generation of kernel-devel
rpm-pkg: install firmware files in kernel relative directory
rpm-pkg: add %post section to create initramfs and grub hooks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild update from Michal Marek:
"Only these two commits are in the kbuild branch this time:
- Using filechk for include/config/kernel.release
- Cleanup in scripts/sortextable.c"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Do not overwrite include/config/kernel.release needlessly
scripts: remove unused function in sortextable.c
|
|
kernel/cgroup.c is the only place in the tree that relies on eventfd.h
pulling file.h; move that include there. Switch from eventfd_fget()/fput()
to fdget()/fdput(), while we are at it - eventfd_ctx_fileget() will fail
on non-eventfd descriptors just fine, no need to do that check twice...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
On some filesystems it's impossible even with fs corruption, but we'd
better not rely on that, what with memcpy() into on-stack array we
are doing there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
No dentry can get to directory modification methods without
having passed either ->lookup() or ->atomic_open(); if name is
rejected by those two (or by ->d_hash()) with an error, it won't
be seen by anything else.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The only actual current lockref user (dcache) uses zero reference counts
even for perfectly live dentries, because it's a cache: there may not be
any users, but that doesn't mean that we want to throw away the dentry.
At the same time, the dentry cache does have a notion of a truly "dead"
dentry that we must not even increment the reference count of, because
we have pruned it and it is not valid.
Currently that distinction is not visible in the lockref itself, and the
dentry cache validation uses "lockref_get_or_lock()" to either get a new
reference to a dentry that already had existing references (and thus
cannot be dead), or get the dentry lock so that we can then verify the
dentry and increment the reference count under the lock if that
verification was successful.
That's all somewhat complicated.
This adds the concept of being "dead" to the lockref itself, by simply
using a count that is negative. This allows a usage scenario where we
can increment the refcount of a dentry without having to validate it,
and pushing the special "we killed it" case into the lockref code.
The dentry code itself doesn't actually use this yet, and it's probably
too late in the merge window to do that code (the dentry_kill() code
with its "should I decrement the count" logic really is pretty complex
code), but let's introduce the concept at the lockref level now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
