summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-10-29Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-29net: Fix 'Re: PACKET_TX_RING: packet size is too long'Gabor Gombas
Currently PACKET_TX_RING forces certain amount of every frame to remain unused. This probably originates from an early version of the PACKET_TX_RING patch that in fact used the extra space when the (since removed) CONFIG_PACKET_MMAP_ZERO_COPY option was enabled. The current code does not make any use of this extra space. This patch removes the extra space reservation and lets userspace make use of the full frame size. Signed-off-by: Gabor Gombas <gombasg@sztaki.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29net,socket: introduce DECLARE_SOCKADDR helper to catch overflow at build timeCyrill Gorcunov
proto_ops->getname implies copying protocol specific data into storage unit (particulary to __kernel_sockaddr_storage). So when we implement new protocol support we should keep such a detail in mind (which is easy to forget about). Lets introduce DECLARE_SOCKADDR helper which check if storage unit is not overfowed at build time. Eventually inet_getname is switched to use DECLARE_SOCKADDR (to show example of usage). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-10-29net: Introduce dev_get_by_index_rcu()Eric Dumazet
Some workloads hit dev_base_lock rwlock pretty hard. We can use RCU lookups to avoid touching this rwlock. netdevices are already freed after a RCU grace period, so this patch adds no penalty at device dismantle time. dev_ifname() converted to dev_get_by_index_rcu() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29atm: Cleanup redundant tests on unsignedroel kluin
The variables are unsigned so the `< 0' test always fails, the other part of the test catches wrapped values. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29net: Cleanup redundant tests on unsignedroel kluin
optlen is unsigned so the `< 0' test is never true. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29net: Cleanup redundant tests on unsignedroel kluin
If there is data, the unsigned skb->len is greater than 0. rt.sigdigits is unsigned as well, so the test `>= 0' is always true, the other part of the test catches wrapped values. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29gigaset: convert strcmp chain to table lookupTilman Schmidt
Replace the sequence of strcmp calls for interpreting ZSAU parameter strings by a table of known strings and lookup loop to improve readability. Impact: readability improvement, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29gigaset: checkpatch cleanup of ev-layer.cTilman Schmidt
On more step towards the holy grail of checkpatch.pl silence. Impact: cosmetic Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29bas_gigaset: checkpatch cleanupTilman Schmidt
On the quest for the holy grail of checkpatch.pl silence. Impact: cosmetic Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ser_gigaset: checkpatch cleanupTilman Schmidt
Duly uglified as demanded by checkpatch.pl. Impact: cosmetic Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29gigaset: checkpatch cleanupTilman Schmidt
Dum sanctis checkpatch.pl'ae legibus obsequimur. Impact: cosmetic Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29usb_gigaset: code cleanupTilman Schmidt
Reorganize the code of the Gigaset M10x driver to make it more readable, less redundant, better aligned to the style of other parts of the driver, and cause fewer checkpatch.pl complaints. Impact: code reorganization, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29gigaset: fix bad assumptions about CAPI skbuffsTilman Schmidt
The CAPI interface incorrectly assumed that CAPI messages would always start at the beginning of the data buffer: fix by treating DATA_B3 messages as the link layer header to their payload data. This fix changes the way acknowledgement information is propagated through the hardware specific modules and thereby impacts the ISDN4Linux variant of the driver, too. Also some assumptions about methods not being called from interrupt context turned out to be unwarranted; fix by using dev_kfree_skb_any() wherever non-interrupt context isn't guaranteed. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29gigaset: fix format string typo in CAPI dial commandTilman Schmidt
A missing dot lead to garbage characters being included in the dial command generated from a CAPI CONNECT_REQ message, which interestingly enough worked anyway, illustrating the resilience of the device. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29gigaset: CAPI module readability improvementsTilman Schmidt
Replace the "ignoring Additional Info" warning message by better readable ones citing the specific subparameters being ignored. Make parts of the code more readable by using a local cmsg pointer variable. Impact: readability improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Allow disabling of DSACK TCP option per routeGilad Ben-Yossef
Add and use no DSCAK bit in the features field. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: Ori Finkelman <ori@comsleep.com> Sigend-off-by: Yony Amit <yony@comsleep.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Allow to turn off TCP window scale opt per routeGilad Ben-Yossef
Add and use no window scale bit in the features field. Note that this is not the same as setting a window scale of 0 as would happen with window limit on route. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: Ori Finkelman <ori@comsleep.com> Sigend-off-by: Yony Amit <yony@comsleep.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Allow disabling TCP timestamp options per routeGilad Ben-Yossef
Implement querying and acting upon the no timestamp bit in the feature field. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: Ori Finkelman <ori@comsleep.com> Sigend-off-by: Yony Amit <yony@comsleep.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Add the no SACK route option featureGilad Ben-Yossef
Implement querying and acting upon the no sack bit in the features field. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: Ori Finkelman <ori@comsleep.com> Sigend-off-by: Yony Amit <yony@comsleep.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Add dst_feature to query route entry featuresGilad Ben-Yossef
Adding an accessor to existing dst_entry feautres field and refactor the only supported feature (allfrag) to use it. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: Ori Finkelman <ori@comsleep.com> Sigend-off-by: Yony Amit <yony@comsleep.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Allow tcp_parse_options to consult dst entryGilad Ben-Yossef
We need tcp_parse_options to be aware of dst_entry to take into account per dst_entry TCP options settings Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: Ori Finkelman <ori@comsleep.com> Sigend-off-by: Yony Amit <yony@comsleep.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Only parse time stamp TCP option in time wait sockGilad Ben-Yossef
Since we only use tcp_parse_options here to check for the exietence of TCP timestamp option in the header, it is better to call with the "established" flag on. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: Ori Finkelman <ori@comsleep.com> Signed-off-by: Yony Amit <yony@comsleep.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29netdev: usb: dm9601.c can drive a device not supported yet, add support for itJanusz Krzysztofik
I found that the current version of drivers/net/usb/dm9601.c can be used to successfully drive a low-power, low-cost network adapter with USB ID 0a46:9000, based on a DM9000E chipset. As no device with this ID is yet present in the kernel, I have created a patch that adds support for the device to the dm9601 driver. Created and tested against linux-2.6.32-rc5. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29qlge: Fix firmware mailbox command timeout.Ron Mercer
The mailbox command process would only process a maximum of 5 unrelated firmware events while waiting for it's command completion status. It should process an unlimited number of events while waiting for a maximum of 5 seconds. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29qlge: Fix EEH handling.Ron Mercer
Clean up driver resources without touch the hardware. Add pci save/restore state. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ip6mr: Optimize multiple unregistrationEric Dumazet
Speedup module unloading by factorizing synchronize_rcu() calls Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ipv6 sit: Optimize multiple unregistrationEric Dumazet
Speedup module unloading by factorizing synchronize_rcu() calls Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ipmr: Optimize multiple unregistrationEric Dumazet
Speedup module unloading by factorizing synchronize_rcu() calls Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ip6tnl: Optimize multiple unregistrationEric Dumazet
Speedup module unloading by factorizing synchronize_rcu() calls Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29bridge: Optimize multiple unregistrationEric Dumazet
Speedup module unloading by factorizing synchronize_rcu() calls Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29be2net: Add the new PCI IDs to PCI_DEVICE_TABLE.Ajit Khaparde
This patch adds the PCI IDs for the next generation chip to the PCI_DEVICE_ID table. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29AF_RAW: Augment raw_send_hdrinc to expand skb to fit iphdr->ihl (v2)Neil Horman
Augment raw_send_hdrinc to correct for incorrect ip header length values A series of oopses was reported to me recently. Apparently when using AF_RAW sockets to send data to peers that were reachable via ipsec encapsulation, people could panic or BUG halt their systems. I've tracked the problem down to user space sending an invalid ip header over an AF_RAW socket with IP_HDRINCL set to 1. Basically what happens is that userspace sends down an ip frame that includes only the header (no data), but sets the ip header ihl value to a large number, one that is larger than the total amount of data passed to the sendmsg call. In raw_send_hdrincl, we allocate an skb based on the size of the data in the msghdr that was passed in, but assume the data is all valid. Later during ipsec encapsulation, xfrm4_tranport_output moves the entire frame back in the skbuff to provide headroom for the ipsec headers. During this operation, the skb->transport_header is repointed to a spot computed by skb->network_header + the ip header length (ihl). Since so little data was passed in relative to the value of ihl provided by the raw socket, we point transport header to an unknown location, resulting in various crashes. This fix for this is pretty straightforward, simply validate the value of of iph->ihl when sending over a raw socket. If (iph->ihl*4U) > user data buffer size, drop the frame and return -EINVAL. I just confirmed this fixes the reported crashes. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-10-29e1000e: flow control doesn't re-enableBruce Allan
When changing flow control (pause) parameters, the flow control thresholds (i.e. when to send XON/XOFF frames) may not be setup correctly on parts with copper media. Call the existing e1000_set_fc_watermarks() function to set these thresholds. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29vlan: Add support to netdev_ops.ndo_fcoe_get_wwn for VLAN deviceYi Zou
Implements the netdev_ops.ndo_fcoe_get_wwn for VLAN device. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ixgbe: Add support for netdev_ops.ndo_fcoe_get_wwn to 82599Yi Zou
Implements the netdev_ops.ndo_fcoe_get_wwn in 82599 if it finds valid prefix for the World Wide Node Name (WWNN) or World Wide Port Name (WWPN), as well as valid SAN MAC address. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29net: Add ndo_fcoe_get_wwn to net_device_opsYi Zou
Add ndo_fcoe_get_wwn so Fiber Channel over Ethernet (FCoE) can make use of the provided World Wide Port Name (WWPN) and World Wide Node Name (WWNN) from the underlying network interface driver. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ixgbe: Add support for 82599 alternative WWNN/WWPN prefixYi Zou
The 82599 EEPROM supports alternative prefix for World Wide Node Name (WWNN) and World Wide Port Name (WWPN). The prefixes can be used together with the SAN MAC address to form the WWNN and WWPN, which can be used by upper layer drivers such as Fiber Channel over Ethernet (FCoE). Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28vmxnet3: remove duplicate #includeShreyas Bhatewara
Remove duplicate headerfile includes from vmxnet3_int.h Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28bonding: fix a race condition in calls to slave MII ioctlsJiri Bohac
In mii monitor mode, bond_check_dev_link() calls the the ioctl handler of slave devices. It stores the ndo_do_ioctl function pointer to a static (!) ioctl variable and later uses it to call the handler with the IOCTL macro. If another thread executes bond_check_dev_link() at the same time (even with a different bond, which none of the locks prevent), a race condition occurs. If the two racing slaves have different drivers, this may result in one driver's ioctl handler being called with a pointer to a net_device controlled with a different driver, resulting in unpredictable breakage. Unless I am overlooking something, the "static" must be a copy'n'paste error (?). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28be2net: Changes to update ethtool get_settings function to return ↵Sarveshwar Bandi
appropriate values. Update ethtool get_settings function to: - get current link speed settings from controller - get port transceiver type from controller - fill appropriate values for supported, phy_address Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28e100: Fix to allow systems with FW based cards to resume from STDDavid Graham
Devices with loadable firmware must have their firmware reloaded after the system resumes from sleep, but the request_firmare() API is not available at this point in the resume flow because tasks are not yet running, and the system will hang if it is called. Work around this issue by only calling request_firmware() for a device's first firmware load, and cache a copy of the pointer to the firmware blob for that device, so that we may reload firmware images even during resume. Signed-off-by: David Graham <david.graham@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: update version to 4.0.65Dhananjay Phadke
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: module firmware hintsDhananjay Phadke
Add MODULE_FIRMWARE hints for various firmware file types, required by different chip revisions. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: update module infoDhananjay Phadke
Update module info with QLogic signature. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: add PCI IDs for new chipDhananjay Phadke
Add PCI vendor and device IDs for QLE8240 and QLE8242 CNA devices. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: refactor indirect register accessDhananjay Phadke
Refactor code to calculate and set indirect access window for control registers in 2MB address space (NX3031 or newer). Use void __iomem * data type for absolute pci addresses. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: support for new firmware file formatAmit Kumar Salecha
Add support for extracting firmware from a unified file format which embeds firmware images for all chip revisions. Fallback to orginal file formats if new image is not found. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>