summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-12-24Input: adxl34x - make platform_data include self containedWolfram Sang
Since it suggests to use defines from input.h (ABS_X, ...), also include the file to make them available. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-24Input: adxl34x - don't set THRESH_TAP twiceWolfram Sang
The datasheet doesn't say anything about writing twice, so this was probably overlooked. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-24Input: adxl34x - consistently use read/write encapsulationWolfram Sang
Don't open code the AC_READ and AC_WRITE macros. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-24Input: wm831x-on - convert to devm_input_allocate_device()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-24Input: wm831x-ts - convert to devm_input_allocate_device()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-16Input: stmpe-ts - report BTN_TOUCH eventVipul Kumar Samar
stmpe touchscreen supports BTN_TOUCH event but doesn't report it. Add BTN_TOUCH reporting capability to the stmpe touchscreen driver. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-16Input: walkera0701 - fix crash on startupPeter Popovec
The driver's timer must be set up before enabling IRQ handler, otherwise bad things may happen. Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Popovec <popovec@fei.tuke.sk> CC: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-03Input: gpio_keys_polled - switch to using gpio_request_one()Dmitry Torokhov
This saves us a few lines of code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-03Input: gpio_keys - switch to using gpio_request_one()Dmitry Torokhov
This saves us a few lines of code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: gpio-keys-polled - honor 'autorepeat' setting in platform dataAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418-keypad - switch to using managed resourcesDmitry Torokhov
Let's switch to using devm_*() interfaces to manage our resources, thus will simplify error unwinding a bit. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - increase severity of failures in probe()Dmitry Torokhov
Failures to build a keymap, request an IRQ, or register input device are fatal for the driver, therefore the messages should have "error" severity instead of "debug". Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - move device ID tables closer to where they are usedDmitry Torokhov
This matches structure of most other input drivers. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - use dev_get_platdata() to retrieve platform dataDmitry Torokhov
We need to use proper accessor functions instead of directly poking into various structures. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - use a temporary variable for parent deviceDmitry Torokhov
Use a temporary variable for our parent device (coming from I2C client structure); we'll be also using it during conversion to managed resources. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - add support for shared interruptAlban Bedel
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - add support for device tree bindingsAlban Bedel
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driverAlexander Shiyan
The kernel does not contain the symbol SA1100_BITSY so the driver is never compiled and can be removed safely. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: bu21013_ts - add support for Device Tree bootingLee Jones
Now we can register the BU21013_ts touch screen when booting with Device Tree enabled. Here we parse all the necessary components previously expected to be passed from platform data. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: bu21013_ts - move GPIO init and exit functions into the driverLee Jones
These GPIO init and exit functions have no place in platform data, they should be part of the driver instead, Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: bu21013_ts - request regulator that actually existsLee Jones
Currently the BU21013 Touch Screen driver requests a regulator by the name of 'V-TOUCH', which doesn't exist anywhere in the kernel. The correct name, as referenced in platform regulator code is 'avdd'. Here, when we request a regulator, we use the correct name instead. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27ARM: ux500: Strip out duplicate touch screen platform informationLee Jones
We're currently carrying two 'struct bu21013_platform_device's which are identical for no apparent reason. Here we remove the extra burden and apply the same information to the two different instances of the bu21012_tp driver registration. [Dmitry Torokhov: picked it up to (hopefully) reduce merge conflict with bu21013_ts update that follows.] Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: gpio_keys - disable hardware on suspendJonas Aaberg
Disable hardware if active when suspending if the hw can not wake the system from suspend. [Dmitry Torokhov: use input_dev->users instead of a separate flag] Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: gpio_keys - report initial state when opening the deviceDmitry Torokhov
Instead of reporting the initial stage when the device is registered we should do it when the device is opened (so there are users). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: samsung-keypad - switch to using managed resourcesSachin Kamat
devm_* functions are device managed and make error handling and code simpler. While at it also fix error exit paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: spear-keyboard - add clk_{un}prepare() supportVipul Kumar Samar
clk_{un}prepare is mandatory for platforms using common clock framework. Because for SPEAr we don't do anything in clk_{un}prepare() calls, just call them once in probe/remove. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-25Input: imx_keypad - only set enabled columns to open-drainAndreas Pretzsch
In imx_keypad_inhibit(), all 8 columns were set to open-drain, in contrast to the rest of the driver, where only the enabled columns are modified/used. Contrary to the normal expectation, this also affects column I/Os not even mapped via IOMUX to the KPP hardware module but used as a GPIO. Therefore only init enabled columns to open-drain and leave all others with their default reset value of 0, i.e. totem-pole. Signed-off-by: Andreas Pretzsch <apr@cn-eng.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-25Input: HIL - do not call tasklet_disable right before tasklet_killXiaotian Feng
We do not need to call tasklet_disable() before calling tasklet_kill() if taskelt does not reschedult itself. Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: twl4030-pwrbutton - switch to using TWL_MODULE_PM_MASTER definePeter Ujfalusi
To facilitate upcoming cleanup in twl stack switch from using TWL4030_MODULE_PM_MASTER define to usingTWL_MODULE_PM_MASTER. There are no functional changes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: stmpe-keypad - add support for Device Tree bindingsDmitry Torokhov
This patch allows the STMPE driver to be successfully probed and initialised when Device Tree support is enabled. Besides the usual platform data changes, we also separate the process of filling in the 'in use' pin bitmap, as we have to extract the information from Device Tree in the DT boot case. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitconstBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinitconst is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitdataBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: serio - remove CONFIG_HOTPLUG ifdefsBill Pemberton
Remove conditional code based on CONFIG_HOTPLUG being false. It's always on now in preparation of it going away as an option. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Merge branch 'for-linus' into nextDmitry Torokhov
Bring in changes to ads7846 to avoid mereg conflicts.
2012-11-22Input: stmpe-ts - add DT support for stmpe touchscreenVipul Kumar Samar
This patch allows the STMPE Touchscreen driver to be successfully probed and initialised when Device Tree support is enabled. Bindings are mentioned in Documentation too. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21Input: wacom - add support for a new MT device (0x4001)Ping Cheng
It supports 10 fingers. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21Input: wacom - simplify type check for newer V5 devicesPing Cheng
The updated type enum enables this implementation. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21ARM - OMAP: ads7846: fix pendown debounce settingIgor Grinberg
Commit 97ee9f01 (ARM: OMAP: fix the ads7846 init code) have enabled the pendown GPIO debounce time setting by the below sequence: gpio_request_one() gpio_set_debounce() gpio_free() It also revealed a bug in the OMAP GPIO handling code which prevented the GPIO debounce clock to be disabled and CORE transition to low power states. Commit c9c55d9 (gpio/omap: fix off-mode bug: clear debounce settings on free/reset) fixes the OMAP GPIO handling code by making sure that the GPIO debounce clock gets disabled if no GPIO is requested from current bank. While fixing the OMAP GPIO handling code (in the right way), the above commit makes the gpio_request->set_debounce->free sequence invalid as after freeing the GPIO, the debounce settings are lost. Fix the debounce settings by moving the debounce initialization to the actual GPIO requesting code - the ads7846 driver. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21Input: ads7846 - enable pendown GPIO debounce time settingIgor Grinberg
Some platforms need the pendown GPIO debounce time setting programmed. Since the pendown GPIO is handled by the driver, the debounce time should also be handled along with the pendown GPIO request. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21OMAP: nokia770: remove custom implementation of ads7846_get_pendown_stateDmitry Torokhov
The default implementation matches exactly our custom one so we can switch to using the default one. As a bonus the driver will take care of setting GPIO line for us. Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-20Input: matrix-keypad - add device tree supportAnilKumar Ch
Also the driver was modifued to take advantage of recent improvements in matrix_keypad_build_keymap() implementation, which automatically allocates memory for keymap. The driver was tested on AM335x EVM. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-18Input: mousedev - move /dev/input/mice to the correct minorDmitry Torokhov
When doing conversion to dynamic input numbers I inadvertently moved /dev/input/mice from c,13,63 to c,13,31. We need to fix this so that setups with statically populated /dev continue working. Tested-by: Krzysztof Mazur <krzysiek@podlesie.net> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-14Input: marix-keymap - automatically allocate memory for keymapDmitry Torokhov
In device tree enabled setups requiring preallocated memory for storing keymap is quite often awkward, so let's provide an option of allocating it directly in matrix_keypad_build_keymap(). Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10Input: add Retu power button driver.Aaro Koskinen
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10Input: HIL - remove one gotoRolf Eike Beer
This goto is only used to skip the next instruction, which can easily be done without a goto. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10Input: document new members of struct input_devHenrik Rydberg
Fixes kernel-doc warnings for the members added in 3.7-rc1. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10Input: MT - document new 'flags' argument of input_mt_init_slots()Henrik Rydberg
Fixes new kernel-doc warning in input-mt.c: Warning(drivers/input/input-mt.c:38): No description found for parameter 'flags' Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 21:43:20 +0000