summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-03-30V4L/DVB (11270): meye: Remove buffer type checks from XXX_fmt_vid_cap, XXXbufTrent Piepho
The ->vidioc_(s|g|try|enum)_fmt_vid_cap() methods are only called on VIDEO_CAPTURE buffers. Thus, there is no need to check or set the buffer's 'type' field since it must already be set to VIDEO_CAPTURE. The v4l2-ioctl core only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(q|dq|query)bufs() and vidioc_reqbufs(). Since this driver only defines ->vidioc_try_fmt_vid_cap() the checks can be removed from vidioc_reqbufs(), vidioc_querybuf(), vidioc_qbuf(), and vidioc_dqbuf(). Also, the buffer index is unsigned so it's not necessary to check if it is less than zero. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11269): cx88-blackbird: Stop setting buffer type in XXX_fmt_vid_capTrent Piepho
The ->vidioc_(s|g|try|enum)_fmt_vid_cap() methods are only called on VIDEO_CAPTURE buffers. Thus, there is no need to check or set the 'type' field since it must already be set to VIDEO_CAPTURE. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11268): cx23885-417: Don't need to zero ioctl parameter fieldsTrent Piepho
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is supposed to fill in for read-only ioctls. For read/write ioctls, all the fields which aren't supplied from userspace will be zeroed out. Zeroing code is removed from enum_input, g_tuner, g_frequency, querycap, enum_fmt_vid_cap, g_fmt_vid_cap, and try_fmt_vid_cap. The ->vidioc_(s|g|try|enum)_fmt_vid_cap() methods are only called on VIDEO_CAPTURE buffers. Thus, there is no need to check or set the buffer's 'type' field since it must already be set to VIDEO_CAPTURE. There also appeared to be a copy and paste error in vidioc_try_fmt_vid_cap() that would set f->fmt.pix.sizeimage to zero. Note that the s_fmt_vid_cap method doesn't appear to actually do anything. Whatever parameters were requested are just silently ignored. Was this intentional? Who knows, as the commit log entry for the driver just says, "Add generic cx23417 hardware encoder support." There are no docs. A comment like "this driver totally ignores the v4l2 spec w.r.t. VIDIOC_S_FMT because ..." would have gone a long way. Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11267): cafe_ccic: Remove buffer type check from XXXbufTrent Piepho
The v4l2-ioctl core only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(q|dq|query)bufs() and vidioc_reqbufs(). This driver only defines ->vidioc_try_fmt_vid_cap() so only VIDEO_CAPTURE buffers are allowed to be used with cafe_vidioc_reqbufs(), cafe_vidioc_querybuf(), cafe_vidioc_qbuf(), and cafe_vidioc_dqbuf(). The ->vidioc_(s|g|try|enum)_fmt_vid_cap() methods are only called on VIDEO_CAPTURE buffers. Thus, there is no need to check or set the buffer's 'type' field since it must already be set to VIDEO_CAPTURE. So the check in cafe_vidioc_enum_fmt_vid_cap() can be removed. The 'index' field of v4l2_buffer is unsigned so the checks for it being less than zero can be removed too. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11266): vino: Remove code for things already done by video_ioctl2Trent Piepho
The v4l2-ioctl core only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used in vidioc_(g|s)_parm, vidioc_(q|dq|query)buf, and vidioc_reqbufs. Remove buffer type checking from vino_g_parm(), vino_s_parm(), vino_reqbufs(), vino_querybuf(), vino_qbuf(), and vino_dqbuf(). This reduced the indent level of the code so a few lines can be wrapped better. Also fixed the C++ type comments. The v4l2-ioctl core also provides structs that have been pre-zeroed for all fields that driver is supposed to fill in, so remove zeroing code from vino_enum_fmt_vid_cap(). Also, the format index is unsigned so it's not necessary to check if it's less than zero. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11265): stkwebcam: Remove buffer type check from g_parm and ↵Trent Piepho
q/dq/reqbufs The v4l2-ioctl core only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(q|dq|query)bufs(), vidioc_reqbufs() and now vidioc_(s|g)_parm. This driver only defines ->vidioc_try_fmt_vid_cap() so only VIDEO_CAPTURE buffers are allowed to be used with vidioc_g_parm(), vidioc_qbuf(), vidioc_dqbuf(), and vidioc_reqbufs(). Cc: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11264): omap24xxcam: Remove buffer type check from vidioc_s/g_parmTrent Piepho
The v4l2-ioctl core now only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used in vidioc_(g|s)_parm. This driver only defines ->vidioc_try_fmt_vid_cap() so only VIDEO_CAPTURE buffers are allowed to be used with vidioc_s_parm() and vidioc_g_parm(). Cc: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11263): gspca: Stop setting buffer type, and avoid memset in querycapTrent Piepho
The v4l2-ioctl core checks the buffer type now by only allowing buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined. This driver only defines ->vidioc_try_fmt_vid_cap() so only VIDEO_CAPTURE buffers are allowed to be used with vidioc_g_parm. Also, ->vidioc_enum_fmt_vid_cap() is only called for VIDEO_CAPTURE buffers. There is no need to set the buffer type since it must already be the correct value. The struct which ->vidioc_querycap() is supposed to fill in is already zeroed so it's not necessary to call memset on it. Cc: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11262): bttv: Remove buffer type check from vidioc_g_parmTrent Piepho
The v4l2-ioctl core only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(q|dq|query)bufs(), vidioc_reqbufs() and now vidioc_(s|g)_parm. The driver was only allowing VIDEO_CAPTURE buffers for g_parm, but since the driver defines ->vidioc_try_fmt_vid_overlay() and ->vidioc_try_fmt_vbi_cap() it will now allow VIDEO_OVERLAY and VBI_CAPTURE buffers as well. This should be fine as the driver only fills in the frame rate field, which is just as valid for video overlay and vbi capture as it is for video capture. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11261): saa7146: Remove buffer type check from vidioc_g_parmTrent Piepho
The v4l2-ioctl core now only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(g|s)_parm. The driver was only allowing VIDEO_CAPTURE buffers for g_parm, but since the driver defines ->vidioc_try_fmt_vid_overlay() it will now allow VIDEO_OVERLAY buffers as well. This should be fine as the fields the driver fills in, readbuffers and frame rate, aren't wrong for VIDEO_OVERLAY buffers. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11260): v4l2-ioctl: Check format for S_PARM and G_PARMTrent Piepho
Return EINVAL if VIDIOC_S/G_PARM is called for a buffer type that the driver doesn't define a ->vidioc_try_fmt_XXX() method for. Several other ioctls, like QUERYBUF, QBUF, and DQBUF, etc. do this too. It saves each driver from having to check if the buffer type is one that it supports. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11256): dabusb: fix compile warning.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11255): dst_ca: fix compile warning.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11254): cs53l32a: remove legacy support.Hans Verkuil
All drivers that use this device have been converted to v4l2_subdev, so there is no more need to support autoprobing on kernels >= 2.6.22. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11253): saa7134: fix RTD Embedded Technologies VFG7350 support.Hans Verkuil
This card has the saa6752hs on 7-bit address 0x21 instead of 0x20. Add support in the card definition struct to select which address to use and update the definitions accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11251): tuner: prevent invalid initialization of t->config in set_typeMichael Krufky
Drivers that don't set "config" directly in the set_type function will end up with an invalid configuration value. Check that the value is sane, otherwise initialize to 0. Thanks to James Edward Geiger & Steven Toth for reporting this bug. Cc: Steven Toth <stoth@linuxtv.org> Cc: James Edward Geiger <james.e.geiger@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11248): Remove debug output from stb6100_cfg.hArtem Makhutov
This patch removes the debug output from stb6100_cfg.h as it is flooding the syslog with tuning data during normal operation. Signed-off-by: Artem Makhutov <artem@makhutov.org> Acked-by: Manu Abraham <abraham.manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11247): hdpvr: empty internal device buffer after stopping streamingJanne Grunau
Makes the next capturing starting faster and more reliable. Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11246): hdpvr: convert printing macros to v4l2_* with struct ↵Janne Grunau
v4l2_device it gives us a nice and unique prefix per device Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11245): hdpvr: add struct v4l2_deviceJanne Grunau
Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11244): pluto2: silence spew of card hung up messagesAlan Cox
If the card is ejected on some systems you get a spew of messages as other shared IRQ devices interrupt between the card eject and the card IRQ disable. We don't need to spew them all out Closes #7472 Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11243): cx88: Missing failure checksAlan Cox
The ioremap one was reported in October 2007 (Bug 9146), the kmalloc one was blindingly obvious while looking at the ioremap one The bug suggests some other configuration for lots of I/O memory (32MB per device is ioremapped) but I'll leave that to the real maintainers Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11242): allow v4l2 drivers to provide a get_unmapped_area handlerDaniel Glöckner
Shared memory mappings on nommu machines require a get_unmapped_area file operation that suggests an address for the mapping. This patch adds a way for v4l2 drivers to provide this callback. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11237): media/zoran: fix printk formatRandy Dunlap
Fix printk format warning: drivers/media/video/zoran/zoran_driver.c:345: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'phys_addr_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11236): tda827x: fix locking issues with DVB-Cklaas de waal
Separate tuning table for DVB-C solves tuning problem at 388MHz TechnoTrend C-1501 DVB-C card does not lock on 388MHz. I assume that existing frequency table is valid for DVB-T. This is suggested by the name of the table: tda827xa_dvbt. Added a table for DVB-C with the name tda827xa_dvbc. Added runtime selection of the DVB-C table when the tuner is type FE_QAM. This should leave the behaviour of this driver with with DVB_T tuners unchanged. This modification is in file tda827x.c The tda827x.c gives the following warning message when debug=1: tda827x: tda827x_config not defined, cannot set LNA gain! Solved this by adding a tda827x_config struct in budget-ci.c. Signed-off-by: Klaas de Waal <klaas.de.waal@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11235): changed ioctls to unlockedStoyan Gaydarov
Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11233): mxl5005s: Switch in mxl5005s_set_params should operate on ↵Andy Walls
correct values Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11231): hdpvr: locking fixesJanne Grunau
unlock io_mutex in hdpvr_stop_streaming hdpvr_disconnect to allow the streaming worker to stop before we flush the workqueue. do not return to user space with mutex held in vidioc_encoder_cmd with an unknown encoder command. Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11230): hdpvr: return immediately from hdpvr_poll if data is availableJanne Grunau
simplifies check for available data with hdpvr_get_next_buffer Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11229): hdpvr: set usb interface dev as parent in struct video_deviceJanne Grunau
Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11228): hdpvr: use debugging macro for buffer statusJanne Grunau
Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11227): ce6230: avoid using unitialized varMauro Carvalho Chehab
drivers/media/dvb/dvb-usb/ce6230.c: In function ‘ce6230_i2c_xfer’: drivers/media/dvb/dvb-usb/ce6230.c:107: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11226): avoid warnings for request_ihex_firmware on dabusb and vicamMauro Carvalho Chehab
drivers/media/video/usbvideo/vicam.c: In function ‘vicam_open’: drivers/media/video/usbvideo/vicam.c:194: warning: ‘fw’ may be used uninitialized in this function drivers/media/video/dabusb.c: In function ‘dabusb_probe’: drivers/media/video/dabusb.c:337: warning: ‘fw’ may be used uninitialized in this function Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11225): v4lgrab: fix compilation warningsMauro Carvalho Chehab
Documentation/video4linux/v4lgrab.c: In function ‘main’: Documentation/video4linux/v4lgrab.c:193: warning: ‘src_depth’ is used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘b’ may be used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘g’ may be used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘r’ may be used uninitialized in this function Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11223): gspca - doc: Add the 15b8:6001 webcam to the Documentation.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11222): gspca - zc3xx: The webcam DLink DSB - C320 has the sensor ↵Douglas Schilling Landgraf
pas106. Reported-by: Bruna Griebeler <bruna@griebeler.com> Tested-by: Bruna Griebeler <bruna@griebeler.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11221): gspca - sonixj: Prefer sonixj instead of sn9c102 for 0471:0327.Hans de Goede
Prefer the gspca sonixj driver for the Philips SPC600NC webcam instead of the sn9c102 driver. As we've got userreports that it works with the gspca driver, whereas it fails with the sn9c102 driver, see: https://bugzilla.redhat.com/show_bug.cgi?id=477111 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11220): gspca - finepix: Use a workqueue for streaming.Jean-Francois Moine
Tested-by: Frank Zago <frank@zago.net> Acked-by: Frank Zago <frank@zago.net> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11219): gspca - sq905: Optimize the resolution setting.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11218): gspca - sq905: Update the frame pointer after adding the ↵Jean-Francois Moine
last packet. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11216): Add driver for Intel CE6230 DVB-T USB2.0Antti Palosaari
Add driver for Intel CE6230 DVB-T USB 2.0 COFDM demodulator Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11215): zl10353: add support for Intel CE6230 and Intel CE6231Antti Palosaari
Add chip IDs and configuration registers needed for Intel CE6230 and Intel CE6231. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11213): gspca - sq905c: New subdriver.Theodore Kilgore
The code in the new sq905c.c is based upon the structure of the code in gspca/sq905.c, and upon the code in libgphoto2/camlibs/digigr8, which supports the same set of cameras in stillcam mode. I am a co-author of gspca/sq905.c and I am the sole author of libgphoto2/camlibs/digigr8, which is licensed under the LGPL. I hereby give myself permission to use my own code from libgphoto2 in gspca/sq905c.c. Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11212): gspca - vc032x: Use YVYU format for sensor mi1320_soc.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11211): gspca - vc032x: Simplify the i2c write function.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11209): gspca - vc032x: New sensor mi1320_soc and webcam 15b8:6001 ↵Jean-Francois Moine
added. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11208): pvrusb2: Use v4l2_device_disconnect()Mike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11207): pvrusb2: Add composite and s-video input support for OnAir ↵Mike Isely
devices Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11206): pvrusb2: Add sub-device for demodMike Isely
Forgot to include the tda9887 component when moving to v4l2-subdev. I got fooled because its name is "tuner", the same as the tuner module. Silly me. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11205): pvrusb2: Remove ancient IVTV specific ioctl functionsMike Isely
Remove ancient IVTV_IOC_G_CODEC and IVTV_IOC_S_CODEC ioctl functions from the pvrusb2 driver. These are very very old, were non-standard, and were only present to keep MythTV happy (their implementation did nothing except to report success). That was long ago; no recent versions of MythTV should require this anymore. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 11:01:11 +0000