summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-01-09mfd: Fix stmpe section mismatchSamuel Ortiz
This fixes: WARNING: drivers/built-in.o(.text+0xf368f): Section mismatch in reference from the function stmpe_probe() to the function .devinit.text:stmpe_chip_init() The function stmpe_probe() references the function __devinit stmpe_chip_init(). Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fix stmpe build warningSamuel Ortiz
This fixes: drivers/mfd/stmpe.c:114:1: warning: data definition has no type or storage class [enabled by default] drivers/mfd/stmpe.c:114:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fix STMPE I2c build failureSamuel Ortiz
STMPE i2c is a bool and should depend on I2c=y. That fixes: drivers/built-in.o: In function `i2c_block_write': stmpe-i2c.c:(.text+0xf4553): undefined reference to +`i2c_smbus_write_i2c_block_data' drivers/built-in.o: In function `i2c_block_read': stmpe-i2c.c:(.text+0xf457f): undefined reference to +`i2c_smbus_read_i2c_block_data' drivers/built-in.o: In function `i2c_reg_write': stmpe-i2c.c:(.text+0xf45ab): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `i2c_reg_read': stmpe-i2c.c:(.text+0xf45d4): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `stmpe_init': stmpe-i2c.c:(.init.text+0xaf22): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `stmpe_exit': stmpe-i2c.c:(.exit.text+0x5e5): undefined reference to `i2c_del_driver' Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Constify aat2870-core i2c_device_id tableAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com>
2012-01-09gpio: Add support for stmpe variant 801Viresh Kumar
STMPE801 is a GPIO expander. GPIO registers for 801 are slightly different from other variants. This patch adds support for STMPE801 in stmpe gpio driver. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for stmpe variant 801Viresh Kumar
STMPE801 is a GPIO expander. Registers for 801 are much different from other variants. This patch adds support for STMPE801 in stmpe mfd driver. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for stmpe variant 610Viresh Kumar
STMPE610 is very much like STMPE811, except the number of gpio pins, which is 8 in 811 and 6 in 610. This patch adds support for variant 610. STMPE610 will share most of the code with STMPE811. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for STMPE SPI interfaceViresh Kumar
Few STMPE controller can have register interface over SPI or I2C. Current implementation only supports I2C. This patch adds support for SPI interface for accessing STMPE's address space. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Separate out STMPE controller and interface specific codeViresh Kumar
Few STMPE controller can have register interface over SPI or I2C. Current implementation only supports I2C and all code is present in a single file stmpe.c. It would be better to separate out I2C interface specific code from controller specific code. Later SPI specific code can be added in a separate file. This patch separates out I2C and controller specific code into separate files, making stmpe.c independent of I2C. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09misc: Remove max8997-muic sysfs attributesDonggeun Kim
The 'switch' sysfs attribute is used for showing and setting the switch state of the device. However, setting it from the userspace focibly is not appropriate. And showing the state can be handled from other places (e.g. external connector) in a unified manner. This patch removes the sysfs attribute. Plus, uevent messages for interrupts are also removed. The initial max8997-muic driver is merged at: git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git for-next Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Remove unused wm831x_irq_data_to_mask_reg()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09leds: Add suuport for MAX8997-LED driverDonggeun Kim
This patch enables LED controller in MAX8997 PMIC. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add platform data and devices for MAX8997 LED controlDonggeun Kim
MAX8997 device does not support LED control function of it. To enable MAX8997-LED driver, platform data and devices for LED are updated. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Make TPS65910 usable without interruptsAfzal Mohammed
TPS65910 can be used without interrupts. Hence let probe succeed in case interrupt can't be configured and let Kernel only to complain about it Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add power off functionality to TWLIgor Grinberg
TWL family of PMICs, used in master mode, have a power off functionality. The resulting power off sequence shuts down all the SoC supplies, LDOs, etc. The sequence is described in the datasheets chapter "Power-Off Sequence". Note, that board must be wired correctly for the power off to work as expected. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: twl-core: Add initial DT support for twl4030/twl6030Benoit Cousson
Add initial device-tree support for twl familly chips. The current version is missing the regulator entries due to the lack of DT regulator bindings for the moment. Only the simple sub-modules that do not depend on platform_data information can be initialized properly. Add irqdomain support. Add documentation for the Texas Instruments TWL Integrated Chip. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Balaji T K <balajitk@ti.com> Cc: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> [grant.likely@secretlab.ca: Fix IRQ_DOMAIN dependency in kconfig] Cc: Grant Likely <grant.likely@secretlab.ca>
2012-01-09mfd: Return an error on failed wm831x register writesMark Brown
Got dropped in the regmap conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert WM8400 to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Unify abx500 headers in mfd/abx500Linus Walleij
This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add missing mutex.h inclusion to WM8994 core.hMark Brown
struct wm8994 includes a mutex so we need to include mutex.h before we declare it. All current users rely on this being done implicitly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Use gpio_request_one from twl6040-coreAxel Lin
Use gpio_request_one() instead of multiple gpiolib calls. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Use gpio_request_one from omap-usb-hostAxel Lin
Use gpio_request_one() instead of multiple gpiolib calls. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Use gpio_request_one from dm355evm_mspAxel Lin
Use gpio_request_one() instead of multiple gpiolib calls. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Use gpio_request_one from aat2870-coreAxel Lin
Use gpio_request_one() instead of multiple gpiolib calls. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jin Park <jinyoungp@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert to DEFINE_PCI_DEVICE_TABLEAxel Lin
Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE tables. Cc: Andres Salomon <dilinger@queued.net> Cc: Denis Turischev <denis@compulab.co.il> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Vincent Sanders <vince@simtec.co.uk> Cc: Mocean Laboratories <info@mocean-labs.com> Cc: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add WM1811A device ID to wm8994 driverMark Brown
The WM1811A is a variant of the WM1811 with pin configuration changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add a dependency on HAVE_CLK for tc6393xbChristoph Fritz
tc6393xb calls the clk API. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Don't declare jz4740_adc_cells constAxel Lin
Remove the const keyword to fix below warning: CC drivers/mfd/jz4740-adc.o drivers/mfd/jz4740-adc.c: In function 'jz4740_adc_probe': drivers/mfd/jz4740-adc.c:290: warning: passing argument 3 of 'mfd_add_devices' discards qualifiers from pointer target type include/linux/mfd/core.h:93: note: expected 'struct mfd_cell *' but argument is of type 'const struct mfd_cell *' Also make jz4740_adc_cells static, is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Use standard device wakeup for handling max8998 wakeup deviceJonghwan Choi
Use device_init_wakeup & device_may_wakeup to init wakeup Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Constify WM8994 regulator_init_dataMark Brown
The driver has no need to modify the regulator_init_data so declare it const to allow machine code to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fix cs5535 section mismatchChristian Gmeiner
Silence following warnings: WARNING: drivers/mfd/cs5535-mfd.o(.data+0x20): Section mismatch in reference from the variable cs5535_mfd_drv to the function .devinit.text:cs5535_mfd_probe() The variable cs5535_mfd_drv references the function __devinit cs5535_mfd_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: drivers/mfd/cs5535-mfd.o(.data+0x28): Section mismatch in reference from the variable cs5535_mfd_drv to the function .devexit.text:cs5535_mfd_remove() The variable cs5535_mfd_drv references the function __devexit cs5535_mfd_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Rename the variable from *_drv to *_driver so modpost ignore the OK references to __devinit/__devexit functions. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add device tree probe support for mc13xxxShawn Guo
This adds device tree probe support for mc13xxx mfd driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09ARM: sa1100: Refactor mcp-sa11x0 to use platform resources.Jochen Friedrich
Make use of memory resources rather than hardcoded IO adresses. This is a first step towards DT support. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.Jochen Friedrich
Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fix twl4030-irq typoNeilBrown
overwriten -> overwritten Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Set twl4030-irq tertiary interrupts to be nested/threaded.NeilBrown
As tertiary interrupts are handled by handle_twl4030_sih calling handle_nested_irq, they do not need their own separate irq thread. So mark them as 'nested_thread' interrupts to avoid the extra thread creation. Tested on GTA04 Pheonux. Signed-off-by: NeilBrown <neilb@suse.de> Tested-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fixed unconditional reset of the mc13xxx ADC reading enable bitsRobin van der Gracht
When the ADC is being prepared for a single or multiple channel reading, the adc0 register is reconfigured without taking the lithium cell, charge current and battery current reading enable bits into account. Which results in clearing the bits. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09misc: Add driver support for MAX8997 MUICDonggeun Kim
The MUIC function in MAX8997 device can be used as a USB port detector and switch. This patch supports the MUIC feature of MAX8997. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add platform data for MAX8997 MUIC driverDonggeun Kim
Currently, MAX8997 device does not support MUIC function of it. To add MAX8997 MUIC driver, header file should be updated. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert WM8350 to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Store wm8350 struct in core device driver dataMark Brown
This will allow us to move to a more idiomatic MFD model as drivers will be able to get the struct by looking at their parent device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Remove redundant spi driver bus initializationLars-Peter Clausen
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_driver_register(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert MFD drivers to use module_platform_driverMark Brown
Factors out some boilerplate code for drivers doing the default thing for platform driver registration. Drivers using platform_driver_probe or an initcall other than module_init can't be converted. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add basic device tree binding for wm8994Mark Brown
Add a placeholder device tree binding for the wm8994 driver. At present the binding is essentially null as none of the platform data is supported, and at least some of that will depend on the pending regulator bindings. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert 88pm860x to use regmap apiJett.Zhou
Convert the 88pm860x normal bank register read/write to use the register map API. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fix 88pm860x test bank i2c interface bugJett.Zhou
There are two banks in 88pm8607. One is the normal bank, and the other one is the test bank, it means it have the same register address in the normal bank and test bank seperately. For test bank register, it needs a special I2C sequence to acess as below, Touching to 0xFA address Touching to 0xFB address Touching to 0xFF address Accessing bank register Touching to 0xFE address Touching to 0xFC address This sequence can't be interrupted. It means that we can't use i2c_transfef() to implement touching 0xFA address. Otherwise, other i2c operation may be inserted into 0xFA and 0xFB operation since the lock of i2c_adapter is already released. So for test bank we implemented specific i2c read/write operation; Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Disable more pulls on WM8994Mark Brown
Disable more pulls by default on WM8994 for a small current saving. Since some designs do leave SPKMODE floating provide platform data to allow that to be left enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for irq over gpio pin to stmpeViresh Kumar
On many boards, stmpe is present as an separate device (not as part of SoC). Here gpio lines are mostly used for getting interrupts. This patch adds in support to handle irq over gpio pin. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert wm8994 to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert wm831x core driver to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-10 01:28:54 +0000