summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-03-22[media] em28xx: tuner setup is broken after algo_data changeHans Verkuil
Commit aab3125c43d8fecc7134e5f1e729fabf4dd196da broke em28xx. I traced this eventually to the change in what algo_data points to. This pointer is also passed to em28xx_tuner_callback() through several hidden tuner layers (yuck!) and that callback was not updated. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] em28xx: Only change I2C bus inside em28xx-i2cMauro Carvalho Chehab
There's currently a bug on em28xx-i2c that makes it write the wrong values to register 06, that controlls the I2C bus speed and bus. Fix it to change only the I2C bus flag. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] m5602_ov7660: return error at ov7660_init()Mauro Carvalho Chehab
It used to be a code that returns arror at ov7660_init. However, this was removed by changeset c84e412f: @@ -231,33 +116,40 @@ int ov7660_init(struct sd *sd) if (dump_sensor) ov7660_dump_registers(sd); - err = ov7660_set_gain(&sd->gspca_dev, sensor_settings[GAIN_IDX]); - if (err < 0) - return err; + return 0; +} - err = ov7660_set_auto_white_balance(&sd->gspca_dev, - sensor_settings[AUTO_WHITE_BALANCE_IDX]); - if (err < 0) - return err; As complained by gcc: drivers/media/usb/gspca/m5602/m5602_ov7660.c: In function 'ov7660_init': drivers/media/usb/gspca/m5602/m5602_ov7660.c:99:9: warning: variable 'err' set but not used [-Wunused-but-set-variable] It should be noticed that the original error code was crappy, as it wasn't returning any error if sensor init fails. Fix it by returning an error if the sensor can't be initialized. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] siano: remove the ir protocol fieldMauro Carvalho Chehab
This field is unused. Remove it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] drxk: fix CNR calculusMauro Carvalho Chehab
Changeset 8f3741e accidentally broke the CNR estimation. It should be calculated as "a + b - c". However, previously, the subtraction by c only occurred if SNR would be positive, due to a bad binding to DVBv3 API. This also fixes the following warning: drivers/media/dvb-frontends/drxk_hard.c:2556:6: warning: variable 'c' set but not used [-Wunused-but-set-variable] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] siano: use do_div() for 64-bits divisionMauro Carvalho Chehab
As reported by Frank Schäfer <fschaefer.oss@googlemail.com>: ERROR: "__divdi3" [drivers/media/common/siano/smsdvb.ko] undefined! Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com> Tested-by: Gianluca Gennari <gennarone@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] MAINTAINERS: add drivers/media/tuners/it913x*Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: style changes for remote controller pollingAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: check I/O errors on IR pollingAntti Palosaari
Use more careful error checks. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: implement i/o optimized reg table writerAntti Palosaari
Use register address auto increment to reduce I/O when large register / values tables are written. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: sleep on attach()Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: move code from it913x to af9033Antti Palosaari
That register is property of demodulator so move it correct place. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] it913x: remove unused af9033 demod tuner config initsAntti Palosaari
Those are demodulator init tables according to used tuner tuner config. af9033 demod driver does those inits currently and due to that these duplicate inits could be removed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: add IT9135 tuner config "62" init tableAntti Palosaari
Dumped out from the Windows driver version 12.07.06.1 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: add IT9135 tuner config "61" init tableAntti Palosaari
Dumped out from the Windows driver version 12.07.06.1 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: add IT9135 tuner config "60" init tableAntti Palosaari
Dumped out from the Windows driver version 12.07.06.1 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: add IT9135 tuner config "52" init tableAntti Palosaari
Dumped out from the Windows driver version 12.07.06.1 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: add IT9135 tuner config "51" init tableAntti Palosaari
Dumped out from the Windows driver version 12.07.06.1 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: add IT9135 tuner config "38" init tableAntti Palosaari
Dumped out from the Windows driver version 12.07.06.1 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: change dual mode boolean to bit fieldAntti Palosaari
For some reason there seems to be value 0x03 in eeprom for dual mode (and 0x00 for single mode). Boolean is not always 1 bit wide - it could be 8 bit wide too. Storing number 0x03 to boolean causes driver to thing there is 4 tuners in some cases :o Add also some comments regarding to eeprom. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: enable remote controller for IT9135 tooAntti Palosaari
There is no difference towards AF9035 remote controller, so enable it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: set demod TS mode config in read_config()Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: use already detected eeprom base addrAntti Palosaari
eeprom memory mapped base address is detected at the very first. Use it everywhere. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: select firmware loader according to firmwareAntti Palosaari
AF9035 and IT9135 supports two different firmware format. Select correct loader according to first byte of firmware file. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] it913x: remove demod init reg tablesAntti Palosaari
These are demod inits and are already done by af9033 demod driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: add IT9135 demod reg init tablesAntti Palosaari
Dumped out from Windows driver version 12.07.06.1, 07/06/2012. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] it913x: use dev_foo() loggingAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] it913x: include tuner IDs from af9033.hAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] it913x: remove unused variablesAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] it913x: get rid of it913x config structAntti Palosaari
We don't need it. Tuner ID and device address are enough. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] it913x: tuner power up routinesAntti Palosaari
Copy forgotten power up registers from it913x-fe driver. Remove two demod registers as those are already written by af9033 driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] it913x: rename functions and variablesAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] it913x: merge it913x_fe_suspend() to it913x_fe_sleep()Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] it913x: merge it913x_fe_start() to it913x_init_tuner()Antti Palosaari
Merge those functions to one and disable sleep. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: IT9135 dual tuner related changesAntti Palosaari
Now it supports IT9135 based dual tuner devices. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: IT9135 v2 supported related changesAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: basic support for IT9135 v2 chipsAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: merge af9035 and it9135 eeprom read routinesAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: USB1.1 support (== PID filters)Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: constify clock tablesAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: [0ccd:0099] TerraTec Cinergy T Stick Dual RC (rev. 2)Antti Palosaari
That same USB ID is used both AF9015 and AF9035 driver. iManufacturer is only thing we can select correct driver without a I/O. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9015: reject device TerraTec Cinergy T Stick Dual RC (rev. 2)Antti Palosaari
That same USB ID is used both AF9015 and AF9035 driver. iManufacturer is only thing we can select correct driver without a I/O. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: fix af9033 demod sampling frequencyAntti Palosaari
ADC needs to be also multiplied to 2 as it9135. Fixes bug I introduced few commits ago. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: add auto configuration heuristic for it9135Antti Palosaari
Detect automatically multiple chip versions and select configuration according to that. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9035: add support for 1st gen it9135Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] af9033: support for it913x tunersAntti Palosaari
Add support for tuners integrated to the IT9135 and IT9137. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] ITE IT913X silicon tuner driverAntti Palosaari
It is tuner driver for tuner integrated to the ITE IT9135 and IT9137 chips. I split it out from the current it913x-fe driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] media/rc/imon.c: avoid flooding syslog with "unknown keypress" when ↵Kevin Baradon
keypad is pressed My 15c2:0036 device floods syslog when a keypad key is pressed: Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fef2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 This patch removes those messages from imon, following suggestion from Mauro. Unknown keys shall be correctly handled by rc/input layer. Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] media/rc/imon.c: make send_packet() delay larger for 15c2:0036Kevin Baradon
Some imon devices (like 15c2:0036) need a higher delay between send_packet calls. Default value is still 5ms to avoid regressions on already working hardware. Also use interruptible wait to avoid load average going too high (and let caller handle signals). Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] Corrected Oops on omap_vout when no manager is connectedFederico Fuga
If no manager is connected to the vout device, the omapvid_init() function fails. No error condition is checked, and the device is started. Later on, when irq is serviced, a NULL pointer dereference occurs. Also, the isr routine must be registered only if no error occurs, otherwise the isr triggers without the proper setup, and the kernel oops again. To prevent this, the error condition is checked, and the streamon function exits with error. Also the isr registration call is moved after the setup procedure is completed. Reviewed-by: Prabhakar Lad <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-23 00:39:14 +0000