summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-10-09omapdss: HDMI: create a Wrapper libraryArchit Taneja
HDMI wrapper is a block common to DSS in OMAP4, OMAP5 and DRA7x. Move the existing functions from ti_hdmi_4xxx_ip.c to a separate file. These funcs are called directly from the hdmi driver rather than hdmi_ip_ops funtion pointer calls. Add new wrapper funcs which can be used by other hdmi libraries like core, pll and phy. Move some of the enums, structs and funcs related to the wrapper from ti_hdmi_4xxx_ip.h to ti_hdmi.h. These will be shared amongst the omap4/5 hdmi platform drivers and other libraries. The old hdmi_wp_init() is removed since it didn't do anything. Timing parameters like interlace, hsync_level and vsync_level weren't copied correctly before. Those are copied correctly now. The DT/hwmod information for hdmi doesn't split the address space according to the required sub blocks. Keep the address offset and size information in the driver for now. This will be removed when the driver gets the information correctly from DT/hwmod. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09simplefb: print some info about the registered fbTom Gundersen
This is similar to the output printed by efifb. Signed-off-by: Tom Gundersen <teg@jklm.no> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09video: wmt_ge_rops: Fix a trivial typoSachin Kamat
Add a missing closing brace for email address. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Alexey Charkov <alchark@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09video: wmt_ge_rops: Remove redundant of_match_ptrSachin Kamat
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Alexey Charkov <alchark@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09video: wm8505fb: Remove redundant of_match_ptrSachin Kamat
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Ed Spiridonov <edo.rus@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09video: ssd1307fb: Remove redundant of_match_ptrSachin Kamat
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09video: amba-clcd: Remove unnecessary amba_set_drvdata()Michal Simek
Driver core clears the driver data to NULL after device_release or on probe failure, so just remove it from here. Driver core change: "device-core: Ensure drvdata = NULL when no driver is bound" (sha1: 0998d0631001288a5974afc0b2a5f568bcdecb4d) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09fbdev: sh_mobile_hdmi: Use devm_kzalloc()Sangjung Woo
Use devm_kzalloc() instead of kzalloc() in order to be free automatically. This makes cleanup paths more simple. Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / au1100fb: Use module_platform_driver() to simplify codeHanjun Guo
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / au1200fb: Use module_platform_driver() to simplify codeHanjun Guo
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / bf54x-lq043fb: Use module_platform_driver() to simplify codeHanjun Guo
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / broadsheetfb: Use module_platform_driver() to simplify codeHanjun Guo
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / cobalt_lcdfb: Use module_platform_driver() to simplify codeHanjun Guo
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / da8xx-fb: Use module_platform_driver() to simplify codeHanjun Guo
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / jz4740_fb: Use module_platform_driver() to simplify codeHanjun Guo
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / metronomefb: Use module_platform_driver() to simplify codeHanjun Guo
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / bfin-t350mcqb-fb: Use module_platform_driver() to simplify codeHanjun Guo
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / hecubafb: Use module_platform_driver() to simplify codeHanjun Guo
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete dumping of core registersRicardo Neri
Add missing register entries when dumping the core. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete register definitions for coreRicardo Neri
Add missing register definitions; mainly for colorspace conversion, video timing and interrupt handling. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Rename the HDMI_CORE_CTRL1 registerRicardo Neri
Rename the register to be aligned with the HDMI_CORE_SYS naming convention. Also, update the naming of the #defines used for its fields. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete dumping of DPLL registersRicardo Neri
Add the spread spectrum clock configuration registers to the DPLL dump. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete register definitions for DPLLRicardo Neri
Add missing register definitions for spread spectrum clocking. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete dumping of wrapper registersRicardo Neri
Add missing registers when dumping the HDMI wrapper. Also, order the dump by offset to improve readability. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete register definitions for wrapperRicardo Neri
Add definitions for missing registers in the HDMI wrapper. Also, order the registers by offset to improve readability. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27video: atmel_lcdfb: add device tree suportJean-Christophe PLAGNIOL-VILLARD
get display timings from device tree Use videomode helpers to get display timings and configurations from device tree Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27video: atmel_lcdfb: pass the pdata as paramsJean-Christophe PLAGNIOL-VILLARD
so we can use have list gpio as example (probe via DT) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27video: atmel_lcdfb: introduce atmel_lcdfb_power_controlJean-Christophe PLAGNIOL-VILLARD
to simplify the check on the presence of the callback Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27video: atmel_lcdfb: fix platform data structJean-Christophe PLAGNIOL-VILLARD
Today we mix pdata and drivers data in the struct atmel_lcdfb_info Fix it and introduce a new struct atmel_lcdfb_pdata for platform data only Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: xilinxfb: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: tcx: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: sunxvr1000: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: platinumfb: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: p9100: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: ffb: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: cg6: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: cg3: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: cg14: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: bw2: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: amifb: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: mb862xx: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: leo: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: grvga: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: atmel_lcdfb: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: jz4740-fb: Use clk_prepare_enable/clk_disable_unprepareLars-Peter Clausen
In preparation to switching the jz4740 clk driver to the common clk framework update the clk enable/disable calls to clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: jz4740-fb: Fix LCD_CMD bit definitionsLars-Peter Clausen
Fix the bit offsets for the LCD_CMD definitions. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26framebuffer: arkfb: Fix framebugger typoJoe Perches
s/framebugger/framebuffer/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: riva: Remove incorrect checksSachin Kamat
'xoffset' and 'yoffset' are unsigned and hence cannot be less than 0. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: aty: Remove incorrect checksSachin Kamat
'xoffset' and 'yoffset' are unsigned and hence cannot be less than 0. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: cirrusfb: Remove incorrect checksSachin Kamat
'xoffset' and 'yoffset' are unsigned and hence cannot be less than 0. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-19 17:27:21 +0000