summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-10-04ARM: S5P6440: Add LCD-LTE480 and enable Framebuffer supportAjay Kumar
This patch: -- Adds platform device support for LCD-LTE480. -- Adds platform data for FB with win_mode and default_bpp. -- Enables FB device support and platform-lcd support. -- Adds SPCON settings for LCD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5P64X0: Add GPIO setup for LCDAjay Kumar
This patch adds GPIO lines settings(HSYNC, VSYNC, VCLK and VD) for LCD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5P64X0: Set s3c_device_fb nameAjay Kumar
Set s3c_device_fb name as "s5p64x0-fb" for S5P6440 and S5P6450. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5P64X0: Add register base and IRQ for FramebufferAjay Kumar
This patch adds: -- Framebuffer related register mappings and bit fields. -- IRQ number being used. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add TVOUT support for SMDKV310Hatim Ali
Add support for TVOUT on SMDKV310 board. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ASoC: Flush Samsung DMA on freeMark Brown
Ever since it was written the Samsung DMA driver has had a TODO in the hw_free() function wondering if we need to flush the DMA buffers. Up until now the answer has been no but with the recent improvements Boojin has done to the DMA infrastructure for the Samsung port the answer has changed to yes for at least S3C6410 systems. If we don't then when we next prepare() the channel the API will get confused trying to run callbacks on the transfers hanging around from the previous time the stream was open and oops. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Support suspend/resume for EXYNOS4212Jongpill Lee
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add PMU register definition for EXYNOS4212Jongpill Lee
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Modify PMU register setting functionJongpill Lee
This patch modifies PMU register setting function to support the other EXYNOS4 SoCs. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5PV210: Add support for M-5MOLS image sensor on UNIVERSAL_C210Sylwester Nawrocki
Add voltage regulator definitions for M-5MOLS camera, platform data definition for the sensor and MIPI-CSI receiver drivers. Add CAM power domain dependencies for FIMC and CSIS devices. Define required I2C0 bus timings. Setup camera port A GPIO. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5PV210: Add support for NOON010PC30 sensor on GONI boardSylwester Nawrocki
Add platform data for CIF camera sensor and FIMC platform data entries for it. Add platform device for s5p-fimc media device driver and the camera port A I/O pins initialization. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5PV210: enable TV support on GONI boardTomasz Stanislawski
This patch adds platform devices and regulators for TV devices on Samsung Goni board. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: enable TV support on Universal_C210 boardTomasz Stanislawski
This patch adds platform devices and regulators for TV devices on Samsung Universal C210 board. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5P: add support for tv deviceTomasz Stanislawski
This patch adds all the resources for TV drivers and devices for Samsung Exynos4 and S5PV210 platforms. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [m.szyprowski: squashed Exynos4 and S5PV210 patches and rewrote commit message] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: SAMSUNG: add i2c hdmiphy controller definitionsTomasz Stanislawski
This patch adds hdmiphy dedicated i2c controller definitions. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [m.szyprowski: renamed to i2c-hdmiphy and squashed Exynos4 and S5PV210 patches] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04Merge branch 'next/topic-gpio-samsung' into next-samsung-develKukjin Kim
2011-10-04Merge branch 'next/topic-dma-samsung' into next-samsung-develKukjin Kim
2011-10-04Merge branch 'next/topic-exynos4-devel' into next-samsung-develKukjin Kim
2011-10-04Merge branch 'next/topic-s3c64xx-devel' into next-samsung-develKukjin Kim
2011-10-04gpio/samsung: correct pin configuration for S5PC100/S5PC110/EXYNOS4Marek Szyprowski
Commit 1b39d5f2cc introduced new common gpio driver for all Samsung GPIO SoCs. The new driver use wrong configuration setup for all gpio pins on S5PC100 and S5PV210 SoCs and external interrupt lines on Exynos4 SoCs. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04gpio/samsung: fix GPIO interrupt registration for EXYNOS4 SoCsMarek Szyprowski
Commit 1b39d5f2cc introduced new common gpio driver for all Samsung GPIO SoCs. The new driver doesn't correctly register GPIO interrupts on Samsung Exynos4 SoCs. This is caused by a typo in define name. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04gpio/samsung: fix broken configuration for EXYNOS4 GPIO banksMarek Szyprowski
Commit 1b39d5f2cc introduced new common gpio driver for all Samsung GPIO SoCs. The new driver doesn't work correctly on Samsung Exynos4 SoC. It fails to set configuration for all but external interrupt pins. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Enable MFC on Samsung SMDKV310Sachin Kamat
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Update config file of NURI to enable RTCChanwoo Choi
This patch update config file of NURI board to enable RTC Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: enable frame buffer on Nuri boardMarek Szyprowski
This patch adds platform definitions to enable s3c-fb driver. Framebuffer window with 1280x800x16bpp mode has been defined. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: enable frame buffer on Universal C210 boardMarek Szyprowski
This patch adds platform definitions to enable s3c-fb driver. Framebuffer window with 480x800x16bpp mode has been defined. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add HPD and PD support for HDMI on ORIGENSachin Kamat
This patch adds hot plug detection(HPD) and power domain(PD) support for HDMI on ORIGEN board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add machine support for 7" LCD on ORIGENTushar Behera
ORIGEN board is fitted with 7" LCD panel HV070WSA. The pixel resolution of the LCD panel is 1024x600. Also power domain device for LCD0 is registered. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Configure MAX8997 PMIC for ORIGENInderpal Singh
Configure MAX8997 PMIC and provide platform specific data for ORIGEN board. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add HDMI support for ORIGENSachin Kamat
This patch adds HDMI (TVout) support for ORIGEN board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add keypad support for ORIGENSachin Kamat
This patch adds keypad support for ORIGEN board as GPIO keys. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add support for secondary MMC port on ORIGENTushar Behera
Secondary MMC port on ORIGEN is connected to sdhci instance 0. Support for secondary MMC port is extended by registering sdhci instance 0. Since sdhci instance 2 can contain a bootable media, sdhci instance 0 is registered after instance 2. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [kgene.kim@samsung.com: Added comments in registering sdhci] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Fix sdhci card detection for ORIGENTushar Behera
Fix incorrect value of cd_type field in platform data for sdhci device. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add PWM backlight support on ORIGENGiridhar Maruthy
This patch adds support for LCD backlight using PWM timer on ORIGEN board. Signed-off-by: Giridhar Maruthy <giridhar.maruthy@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add FIMC device on ORIGEN boardSachin Kamat
This patch adds definitions to enable support for s5p-fimc driver on ORIGEN board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> [kgene.kim@samsung.com: re-ordering changes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add USB EHCI device to ORIGEN boardSachin Kamat
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> [kgene.kim@samsung.com: re-ordering changes in Kconfig] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03Merge branch 'next-samsung-board-v3.1' into next/topic-exynos4-devel-origenKukjin Kim
2011-09-27Linux 3.1-rc8v3.1-rc8Linus Torvalds
2011-09-27Merge branch 'for-linus' of git://github.com/tiwai/soundLinus Torvalds
* 'for-linus' of git://github.com/tiwai/sound: ASoC: ssm2602: Re-enable oscillator after suspend ALSA: usb-audio: Check for possible chip NULL pointer before clearing probing flag ALSA: hda/realtek - Don't detect LO jack when identical with HP ALSA: hda/realtek - Avoid bogus HP-pin assignment ALSA: HDA: No power nids on 92HD93 ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is active
2011-09-27Merge branch 'pm-fixes' of git://github.com/rjwysocki/linux-pmLinus Torvalds
* 'pm-fixes' of git://github.com/rjwysocki/linux-pm: PM / Clocks: Do not acquire a mutex under a spinlock
2011-09-27Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-09-27vfs: remove LOOKUP_NO_AUTOMOUNT flagLinus Torvalds
That flag no longer makes sense, since we don't look up automount points as eagerly any more. Additionally, it turns out that the NO_AUTOMOUNT handling was buggy to begin with: it would avoid automounting even for cases where we really *needed* to do the automount handling, and could return ENOENT for autofs entries that hadn't been instantiated yet. With our new non-eager automount semantics, one discussion has been about adding a AT_AUTOMOUNT flag to vfs_fstatat (and thus the newfstatat() and fstatat64() system calls), but it's probably not worth it: you can always force at least directory automounting by simply adding the final '/' to the filename, which works for *all* of the stat family system calls, old and new. So AT_NO_AUTOMOUNT (and thus LOOKUP_NO_AUTOMOUNT) really were just a result of our bad default behavior. Acked-by: Ian Kent <raven@themaw.net> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-27ASoC: ssm2602: Re-enable oscillator after suspendLars-Peter Clausen
Currently the the internal oscillator is powered down when entering BIAS_OFF state, but not re-enabled when going back to BIAS_STANDBY. As a result the CODEC will stop working after suspend if the internal oscillator is used to generate the sysclock signal. This patch fixes it by clearing the appropriate bit in the power down register when the CODEC is re-enabled. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-26VFS: Fix the remaining automounter semantics regressionsTrond Myklebust
The concensus seems to be that system calls such as stat() etc should not trigger an automount. Neither should the l* versions. This patch therefore adds a LOOKUP_AUTOMOUNT flag to tag those lookups that _should_ trigger an automount on the last path element. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> [ Edited to leave out the cases that are already covered by LOOKUP_OPEN, LOOKUP_DIRECTORY and LOOKUP_CREATE - all of which also fundamentally force automounting for their own reasons - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-26vfs pathname lookup: Add LOOKUP_AUTOMOUNT flagLinus Torvalds
Since we've now turned around and made LOOKUP_FOLLOW *not* force an automount, we want to add the ability to force an automount event on lookup even if we don't happen to have one of the other flags that force it implicitly (LOOKUP_OPEN, LOOKUP_DIRECTORY, LOOKUP_PARENT..) Most cases will never want to use this, since you'd normally want to delay automounting as long as possible, which usually implies LOOKUP_OPEN (when we open a file or directory, we really cannot avoid the automount any more). But Trond argued sufficiently forcefully that at a minimum bind mounting a file and quotactl will want to force the automount lookup. Some other cases (like nfs_follow_remote_path()) could use it too, although LOOKUP_DIRECTORY would work there as well. This commit just adds the flag and logic, no users yet, though. It also doesn't actually touch the LOOKUP_NO_AUTOMOUNT flag that is related, and was made irrelevant by the same change that made us not follow on LOOKUP_FOLLOW. Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Ian Kent <raven@themaw.net> Cc: Jeff Layton <jlayton@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg KH <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-26Merge branch 'samsung-fixes-3' of git://github.com/kgene/linux-samsungLinus Torvalds
* 'samsung-fixes-3' of git://github.com/kgene/linux-samsung: ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver ARM: S5P: fix incorrect loop iterator usage on gpio-interrupt ARM: S3C2443: Fix bit-reset in setrate of clk_armdiv
2011-09-27ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driverSylwester Nawrocki
The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-27ARM: S5PV210: Rename sclk_cam clocks for FIMC media driverSylwester Nawrocki
The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-26Merge branch 'hwmon-for-linus' of git://github.com/groeck/linuxLinus Torvalds
* 'hwmon-for-linus' of git://github.com/groeck/linux: hwmon: (coretemp) remove struct platform_data * parameter from create_core_data() hwmon: (coretemp) constify static data hwmon: (coretemp) don't use kernel assigned CPU number as platform device ID hwmon: (ds620) Fix handling of negative temperatures hwmon: (w83791d) rename prototype parameter from 'register' to 'reg' hwmon: (coretemp) Don't use threshold registers for tempX_max hwmon: (coretemp) Let the user force TjMax hwmon: (coretemp) Drop duplicate function get_pkg_tjmax
2011-09-26Merge branch 'kvm-updates/3.1' of git://github.com/avikivity/kvmLinus Torvalds
* 'kvm-updates/3.1' of git://github.com/avikivity/kvm: KVM: x86 emulator: fix Src2CL decode KVM: MMU: fix incorrect return of spte