summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-05-24mmc: card: Fix use of uninitialized data in mmc_blk_issue_rw_rq.Chris Ball
mmc_blk_issue_rw_rq did not zero out mmc_command on stack. Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: core: Fix use of uninitialized data in mmc_send_if_cond.Chris Ball
mmc_send_if_cond did not zero out mmc_command on stack. Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: core: Fix use of uninitialized data in mmc_cmd_app.Andrei Warkentin
mmc_cmd_app did not zero out mmc_command on stack. Reported-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: quirks: Fix erase/trim for certain SanDisk cards.Andrei Warkentin
CMD38 argument is passed through EXT_CSD[113]. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhci: work around broken dma boundary behaviorMikko Vinni
Some SD host controllers (noticed on an integrated JMicron SD reader on an HP Pavilion dv5-1250eo laptop) don't update the dma address register before signaling a dma interrupt due to a dma boundary. Update the register manually to the next boundary (by default 512KiB), at which the transfer stopped. As long as each transfer is at most 512KiB in size (guaranteed by a BUG_ON in sdhci_prepare_data()) and the boundary is kept at the default value, this fix is needed at most once per transfer. Smaller boundaries are taken care of by counting the transferred bytes. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=28462 Signed-off-by: Mikko Vinni <mmvinni@yahoo.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: quirks: Support for block quirks.Andrei Warkentin
Block quirks implemented using core/quirks.c support. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: MMC boot partitions support.Andrei Warkentin
Allows device MMC boot partitions to be accessed. MMC partitions are treated effectively as separate block devices on the same MMC card. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: card: block.c cleanup for host claim/release.Andrei Warkentin
Move host claim/release into mmc_blk_issue_rq. (This is helpful so that selecting partition only has to happen in one place for these commands.) Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: core: Allow setting CMD timeout for CMD6 (SWITCH).Andrei Warkentin
CMD6 is an R1B-type command, where DAT is used as busy. Depending on register written using CMD6, timeout value can be different as per spec. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhci: R1B command handling + MMC_CAP_ERASE.Andrei Warkentin
ERASE command needs R1B response, so fix R1B-type command handling for SDHCI controller. For non-DAT commands using a busy response, the cmd->cmd_timeout_ms (in ms) field is used for timeout calculations. Based on patch by Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: core: Rename erase_timeout to cmd_timeout_ms.Andrei Warkentin
Renames erase_timeout to cmd_timeout_ms inside struct mmc_command. First step to making host honor timeouts for non-data-transfer commands. Cleans up erase timeout code. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: quirks: fix truncation warningsRandy Dunlap
Fix data truncation warnings: .manfid is not unsigned long: drivers/mmc/core/quirks.c:36: warning: large integer implicitly truncated to unsigned type drivers/mmc/core/quirks.c:40: warning: large integer implicitly truncated to unsigned type drivers/mmc/core/quirks.c:43: warning: large integer implicitly truncated to unsigned type drivers/mmc/core/quirks.c:46: warning: large integer implicitly truncated to unsigned type Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: quirks: Extends card quirks with MMC/SD quirks matching the CID.Andrei Warkentin
The current mechanism is SDIO-only. This allows us to create function-specific quirks, without creating messy Kconfig dependencies, or polluting core/ with function-specific code. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: core: fix memory leak in mmc_add_hostWolfram Sang
led_trigger_register_simple() allocates memory which must not be leaked in the error-path of mmc_add_host. Move it past the only error-check in the function. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhci-pci: Fix checkpatch.pl errorsAmeya Palande
This patch fixes 21 errors and 6 warnings reported by checkpatch.pl. Signed-off-by: Ameya Palande <2ameya@gmail.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: quirks: wl1271 is MMC_QUIRK_DISABLE_CDOhad Ben-Cohen
The wl12xx device supports disconnecting the pull-up resistor on CD/DAT[3] (pin 1) of the card. Tell SDIO core to disconnect that resistor during card init, since we don't need it at that point (and anyway all hosts shall provide pull-up resistors on all data lines DAT[3:0] as described in section 6 of the SD physical specification). As a result, this may save some power, but it's also generally healthy since it prevents both ends from pulling up that pin, which results in undesirable asymmetric physical bus. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: add MMC_QUIRK_DISABLE_CDOhad Ben-Cohen
006ebd5d introduced sdio_disable_cd(), which disconnects the pull-up resistor on CD/DAT[3] (pin 1) of the card. Make it possible to start using sdio_disable_cd() by introducing MMC_QUIRK_DISABLE_CD. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: quirks: wl1271 is MMC_QUIRK_NONSTD_FUNC_IFOhad Ben-Cohen
Tell SDIO core to ignore the standard SDIO function interface codes indicated by the wl1271. This is required because the wl1271 erroneously indicates its first function as a standard Bluetooth SDIO interface, and that drives btsdio mad. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: add MMC_QUIRK_NONSTD_FUNC_IFOhad Ben-Cohen
Introduce MMC_QUIRK_NONSTD_FUNC_IF to ignore the "SDIO Standard Function interface code" as indicated by the card's FBR, and instead treat all functions as non-standard interfaces. This is required to prevent standard drivers from facing errors when trying to communicate with SDIO cards that erroneously indicate standard function interface codes. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: do not switch to 1-bit mode if not requiredOhad Ben-Cohen
6b5eda36 followed SDIO spec part E1 section 8, which states that in case SDIO interrupts are being used to wake up a suspended host, then it is required to switch to 1-bit mode before stopping the clock. Before switching to 1-bit mode (or back to 4-bit mode on resume), make sure that SDIO interrupts are really being used to wake the host. This is helpful for devices which have an external irq line (e.g. wl1271), and do not use SDIO interrupts to wake up the host. In this case, switching to 1-bit mode (and back to 4-bit mode on resume) is not necessary. Reported-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: mmc_card_keep_power cleanupsOhad Ben-Cohen
mmc_card_is_powered_resumed is a mouthful; instead, simply use mmc_card_keep_power, which also better explains the purpose of the macro. Employ mmc_card_keep_power() where possible. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: Reliable write support.Andrei Warkentin
Allows reliable writes to be used for MMC writes. Reliable writes are used to service write REQ_FUA/REQ_META requests. Handles both the legacy and the enhanced reliable write support in MMC cards. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhci: change CONFIG of MMC_SDHCI_TEGRA from 'tristate' to 'bool'Shawn Guo
This config option is used to decide whether tegra sdhci support should be build into the sdhci-platform module. So setting it 'm' is nonsense, since we can't build part of an module as a module. The effect for 'm' will probably be the same as for 'n'. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: tegra: add pm_flagsVenkat Rao
Enable fast bcm4329 WIFI suspend/resume on Tegra2 board. This patch allows the mach-tegra support to tell the tegra MMC host controller to NOT turn off power for the MMC controller the WIFI part lives behind. Thus bcm4329 firmware doesn't need to be reloaded. Signed-off-by: Venkat Rao <vrao@broadcom.com> Tested-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Olof Johansson <olof@lixom.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: remove redundant irq disablingJohn Ogness
There is no need to disable irq's when using the sg_copy_*_buffer() functions because those functions do that already. There are also no races for the mm_queue struct here that would require the irq's to be disabled before calling sg_copy_*_buffer(). Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: Ensure linux starts in eMMC user partitionPhilip Rakity
uBoot sometimes leaves eMMC pointing to the private boot partition. Ensure we always start looking at the user partition. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Bruce Clemens <bpclemens@marvell.com> Signed-off-by: Mark F. Brown <markb@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-16Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Take lock around probes for drm_fb_helper_hotplug_event drm/i915: Revert i915.semaphore=1 default from 47ae63e0 vga_switcheroo: don't toggle-switch devices drm/radeon/kms: add some evergreen/ni safe regs drm/radeon/kms: fix extended lvds info parsing drm/radeon/kms: fix tiling reg on fusion
2011-05-16drm: Take lock around probes for drm_fb_helper_hotplug_eventChris Wilson
We need to hold the dev->mode_config.mutex whilst detecting the output status. But we also need to drop it for the call into drm_fb_helper_single_fb_probe(), which indirectly acquires the lock when attaching the fbcon. Failure to do so exposes a race with normal output probing. Detected by adding some warnings that the mutex is held to the backend detect routines: [ 17.772456] WARNING: at drivers/gpu/drm/i915/intel_crt.c:471 intel_crt_detect+0x3e/0x373 [i915]() [ 17.772458] Hardware name: Latitude E6400 [ 17.772460] Modules linked in: .... [ 17.772582] Pid: 11, comm: kworker/0:1 Tainted: G W 2.6.38.4-custom.2 #8 [ 17.772584] Call Trace: [ 17.772591] [<ffffffff81046af5>] ? warn_slowpath_common+0x78/0x8c [ 17.772603] [<ffffffffa03f3e5c>] ? intel_crt_detect+0x3e/0x373 [i915] [ 17.772612] [<ffffffffa0355d49>] ? drm_helper_probe_single_connector_modes+0xbf/0x2af [drm_kms_helper] [ 17.772619] [<ffffffffa03534d5>] ? drm_fb_helper_probe_connector_modes+0x39/0x4d [drm_kms_helper] [ 17.772625] [<ffffffffa0354760>] ? drm_fb_helper_hotplug_event+0xa5/0xc3 [drm_kms_helper] [ 17.772633] [<ffffffffa035577f>] ? output_poll_execute+0x146/0x17c [drm_kms_helper] [ 17.772638] [<ffffffff81193c01>] ? cfq_init_queue+0x247/0x345 [ 17.772644] [<ffffffffa0355639>] ? output_poll_execute+0x0/0x17c [drm_kms_helper] [ 17.772648] [<ffffffff8105b540>] ? process_one_work+0x193/0x28e [ 17.772652] [<ffffffff8105c6bc>] ? worker_thread+0xef/0x172 [ 17.772655] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772658] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772663] [<ffffffff8105f767>] ? kthread+0x7a/0x82 [ 17.772668] [<ffffffff8100a724>] ? kernel_thread_helper+0x4/0x10 [ 17.772671] [<ffffffff8105f6ed>] ? kthread+0x0/0x82 [ 17.772674] [<ffffffff8100a720>] ? kernel_thread_helper+0x0/0x10 Reported-by: Frederik Himpe <fhimpe@telenet.be> References: https://bugs.freedesktop.org/show_bug.cgi?id=36394 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-16drm/i915: Revert i915.semaphore=1 default from 47ae63e0Andy Lutomirski
My Q67 / i7-2600 box has rev09 Sandy Bridge graphics. It hangs instantly when GNOME loads and it hangs so hard the reset button doesn't work. Setting i915.semaphore=0 fixes it. Semaphores were disabled in a1656b9090f7008d2941c314f5a64724bea2ae37 in 2.6.38 and were re-enabled by commit 47ae63e0c2e5fdb582d471dc906eb29be94c732f Merge: c59a333 467cffb Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Mar 7 12:32:44 2011 +0000 Merge branch 'drm-intel-fixes' into drm-intel-next Apply the trivial conflicting regression fixes, but keep GPU semaphores enabled. Conflicts: drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/i915_gem_execbuffer.c (It's worth noting that the offending change is i915_drv.c, which is not a conflict.) Signed-off-by: Andy Lutomirski <luto@mit.edu> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-16vga_switcheroo: don't toggle-switch devicesFlorian Mickler
If the requested device is already active, ignore the request. This restores the original behaviour of the interface. The change was probably an unintended side effect of commit 66b37c6777c4 vga_switcheroo: split switching into two stages which did not take into account to duplicate the !active check in the split-off stage2. Fix this by factoring that check out of stage1 into the debugfs_write routine. References: https://bugzilla.kernel.org/show_bug.cgi?id=34252 Reported-by: Igor Murzov <e-mail@date.by> Tested-by: Igor Murzov <e-mail@date.by> Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix FS_IOC_SETFLAGS ioctl Btrfs: fix FS_IOC_GETFLAGS ioctl fs: remove FS_COW_FL Btrfs: fix easily get into ENOSPC in mixed case Prevent oopsing in posix_acl_valid()
2011-05-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: fix split bio handling rbd: fix leak of ops struct
2011-05-14Btrfs: fix FS_IOC_SETFLAGS ioctlLi Zefan
Steps to reproduce the bug: - Call FS_IOC_SETLFAGS ioctl with flags=FS_COMPR_FL - Call FS_IOC_SETFLAGS ioctl with flags=0 - Call FS_IOC_GETFLAGS ioctl, and you'll see FS_COMPR_FL is still set! Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-14Btrfs: fix FS_IOC_GETFLAGS ioctlLi Zefan
As we've added per file compression/cow support. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-14fs: remove FS_COW_FLLi Zefan
FS_COW_FL and FS_NOCOW_FL were newly introduced to control per file COW in btrfs, but FS_NOCOW_FL is sufficient. The fact is we don't have corresponding BTRFS_INODE_COW flag. COW is default, and FS_NOCOW_FL can be used to switch off COW for a single file. If we mount btrfs with nodatacow, a newly created file will be set with the FS_NOCOW_FL flag. So to turn on COW for it, we can just clear the FS_NOCOW_FL flag. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-14Btrfs: fix easily get into ENOSPC in mixed caseliubo
When a btrfs disk is created by mixed data & metadata option, it will have no pure data or pure metadata space info. In btrfs's for-linus branch, commit 78b1ea13838039cd88afdd62519b40b344d6c920 (Btrfs: fix OOPS of empty filesystem after balance) initializes space infos at the very beginning. The problem is this initialization does not take the mixed case into account, which will cause btrfs will easily get into ENOSPC in mixed case. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-14Prevent oopsing in posix_acl_valid()Daniel J Blueman
If posix_acl_from_xattr() returns an error code, a negative address is dereferenced causing an oops; fix by checking for error code first. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-14Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: fix oops when LPM is used with PMP
2011-05-14tmpfs: fix race between swapoff and writepageHugh Dickins
Shame on me! Commit b1dea800ac39 "tmpfs: fix race between umount and writepage" fixed the advertized race, but introduced another: as even its comment makes clear, we cannot safely rely on a peek at list_empty() while holding no lock - until info->swapped is set, shmem_unuse_inode() may delete any formerly-swapped inode from the shmem_swaplist, which in this case would leave a swap area impossible to swapoff. Although I don't relish taking the mutex every time, I don't care much for the alternatives either; and at least the peek at list_empty() in shmem_evict_inode() (a hotter path since most inodes would never have been swapped) remains safe, because we already truncated the whole file. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-14libata: fix oops when LPM is used with PMPTejun Heo
ae01b2493c (libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65) added ATA_FLAG_NO_DIPM and made ata_eh_set_lpm() check the flag. However, @ap is NULL if @link points to a PMP link and thus the unconditional @ap->flags dereference leads to the following oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 ... Pid: 295, comm: scsi_eh_4 Tainted: P 2.6.38.5-core2 #1 System76, Inc. Serval Professional/Serval Professional RIP: 0010:[<ffffffff813f98e1>] [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 RSP: 0018:ffff880132defbf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880132f40000 RCX: 0000000000000000 RDX: ffff88013377c000 RSI: ffff880132f40000 RDI: 0000000000000000 RBP: ffff880132defce0 R08: ffff88013377dc58 R09: ffff880132defd98 R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000 R13: 0000000000000000 R14: ffff88013377c000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8800bf700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000001a03000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process scsi_eh_4 (pid: 295, threadinfo ffff880132dee000, task ffff880133b416c0) Stack: 0000000000000000 ffff880132defcc0 0000000000000000 ffff880132f42738 ffffffff813ee8f0 ffffffff813eefe0 ffff880132defd98 ffff88013377f190 ffffffffa00b3e30 ffffffff813ef030 0000000032defc60 ffff880100000000 Call Trace: [<ffffffff81400867>] sata_pmp_error_handler+0x607/0xc30 [<ffffffffa00b273f>] ahci_error_handler+0x1f/0x70 [libahci] [<ffffffff813faade>] ata_scsi_error+0x5be/0x900 [<ffffffff813cf724>] scsi_error_handler+0x124/0x650 [<ffffffff810834b6>] kthread+0x96/0xa0 [<ffffffff8100cd64>] kernel_thread_helper+0x4/0x10 Code: 8b 95 70 ff ff ff b8 00 00 00 00 48 3b 9a 10 2e 00 00 48 0f 44 c2 48 89 85 70 ff ff ff 48 8b 8d 70 ff ff ff f6 83 69 02 00 00 01 <48> 8b 41 18 0f 85 48 01 00 00 48 85 c9 74 12 48 8b 51 08 48 83 RIP [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 RSP <ffff880132defbf0> CR2: 0000000000000018 Fix it by testing @link->ap->flags instead. stable: ATA_FLAG_NO_DIPM was added during 2.6.39 cycle but was backported to 2.6.37 and 38. This is a fix for that and thus also applicable to 2.6.37 and 38. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: "Nathan A. Mourey II" <nmoureyii@ne.rr.com> LKML-Reference: <1304555277.2059.2.camel@localhost.localdomain> Cc: Connor H <cmdkhh@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-05-14Merge branch 'fbmem'Linus Torvalds
* fbmem: Further fbcon sanity checking fbmem: fix remove_conflicting_framebuffers races
2011-05-14Revert "libata: ahci_start_engine compliant to AHCI spec"Tejun Heo
This reverts commit 270dac35c26433d06a89150c51e75ca0181ca7e4. The commits causes command timeouts on AC plug/unplug. It isn't yet clear why. As the commit was for a single rather obscure controller, revert the change for now. The problem was reported and bisected by Gu Rui in bug#34692. https://bugzilla.kernel.org/show_bug.cgi?id=34692 Also, reported by Rafael and Michael in the following thread. http://thread.gmane.org/gmane.linux.kernel/1138771 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Gu Rui <chaos.proton@gmail.com> Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Michael Leun <lkml20100708@newton.leun.net> Cc: Jian Peng <jipeng2005@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-14Further fbcon sanity checkingBruno Prémont
This moves the if (num_registered_fb == FB_MAX) return -ENXIO; check _AFTER_ the call to do_remove_conflicting_framebuffers() as this would (now in a safe way) allow a native driver to replace the conflicting one even if all slots in registered_fb[] are taken. This also prevents unregistering a framebuffer that is no longer registered (vga16f will unregister at module unload time even if the frame buffer had been unregistered earlier due to being found conflicting). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-14fbmem: fix remove_conflicting_framebuffers racesLinus Torvalds
When a register_framebuffer() call results in us removing old conflicting framebuffers, the new registration_lock doesn't protect that situation. And we can't just add the same locking to the function, because these functions call each other: register_framebuffer() calls remove_conflicting_framebuffers, which in turn calls unregister_framebuffer for any conflicting entry. In order to fix it, this just creates wrapper functions around all three functions and makes the versions that actually do the work be called "do_xxx()", leaving just the wrapper that gets the lock and calls the worker function. So the rule becomes simply that "do_xxxx()" has to be called with the lock held, and now do_register_framebuffer() can just call do_remove_conflicting_framebuffers(), and that in turn can call _do_unregister_framebuffer(), and there is no deadlock, and we can hold the registration lock over the whole sequence, fixing the races. It also makes error cases simpler, and fixes one situation where we would return from unregister_framebuffer() without releasing the lock, pointed out by Bruno Prémont. Tested-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: Wire up syscalls new to 2.6.39 alpha: convert to clocksource_register_hz
2011-05-13alpha: Wire up syscalls new to 2.6.39Michael Cree
Wire up the syscalls: name_to_handle_at open_by_handle_at clock_adjtime syncfs and adjust some whitespace in the neighbourhood to align commments. Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Matt Turner <mattst88@gmail.com>
2011-05-13alpha: convert to clocksource_register_hzJohn Stultz
Converts alpha to use clocksource_register_hz. Signed-off-by: John Stultz <johnstul@us.ibm.com> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Matt Turner <mattst88@gmail.com>
2011-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bridge: fix forwarding of IPv6 bonding,llc: Fix structure sizeof incompatibility for some PDUs ipv6: restore correct ECN handling on TCP xmit ne-h8300: Fix regression caused during net_device_ops conversion hydra: Fix regression caused during net_device_ops conversion zorro8390: Fix regression caused during net_device_ops conversion sfc: Always map MCDI shared memory as uncacheable ehea: Fix memory hotplug oops libertas: fix cmdpendingq locking iwlegacy: fix IBSS mode crashes ath9k: Fix a warning due to a queued work during S3 state mac80211: don't start the dynamic ps timer if not associated
2011-05-13Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFSv4.1: Ensure that layoutget uses the correct gfp modes NFSv4.1: remove pnfs_layout_hdr from pnfs_destroy_all_layouts tmp_list NFSv41: Resend on NFS4ERR_RETRY_UNCACHED_REP
2011-05-13rbd: fix split bio handlingYehuda Sadeh
The rbd driver currently splits bios when they span an object boundary. However, the blk_end_request expects the completions to roll up the results in block device order, and the split rbd/ceph ops can complete in any order. This patch adds a struct rbd_req_coll to track completion of split requests and ensures that the results are passed back up to the block layer in order. This fixes errors where the file system gets completion of a read operation that spans an object boundary before the data has actually arrived. The bug is easily reproduced with iozone with a working set larger than available RAM. Reported-by: Fyodor Ustinov <ufm@ufm.su> Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-24 10:21:20 +0000