summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-09-04Merge tag 'mac80211-next-for-john-2014-08-29' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "Not that much content this time. Some RCU cleanups, crypto performance improvements, and various patches all over, rather than listing them one might as well look into the git log instead." Signed-off-by: John W. Linville <linville@tuxdriver.com> Conflicts: drivers/net/wireless/ath/wil6210/wmi.c
2014-08-29net: rfkill: gpio: Add more Broadcom bluetooth ACPI IDsMika Westerberg
This adds one more ACPI ID of a Broadcom bluetooth chip. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-29mac80211: fix chantype recalc warningMichal Kazior
When a device driver is unloaded local->interfaces list is cleared. If there was more than 1 interface running and connected (bound to a chanctx) then chantype recalc was called and it ended up with compat being NULL causing a call trace warning. Warn if compat becomes NULL as a result of incompatible bss_conf.chandef of interfaces bound to a given channel context only. The call trace looked like this: WARNING: CPU: 2 PID: 2594 at /devel/src/linux/net/mac80211/chan.c:557 ieee80211_recalc_chanctx_chantype+0x2cd/0x2e0() Modules linked in: ath10k_pci(-) ath10k_core ath CPU: 2 PID: 2594 Comm: rmmod Tainted: G W 3.16.0-rc1+ #150 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000009 ffff88001ea279c0 ffffffff818dfa93 0000000000000000 ffff88001ea279f8 ffffffff810514a8 ffff88001ce09cd0 ffff88001e03cc58 0000000000000000 ffff88001ce08840 ffff88001ce09cd0 ffff88001ea27a08 Call Trace: [<ffffffff818dfa93>] dump_stack+0x4d/0x66 [<ffffffff810514a8>] warn_slowpath_common+0x78/0xa0 [<ffffffff81051585>] warn_slowpath_null+0x15/0x20 [<ffffffff818a407d>] ieee80211_recalc_chanctx_chantype+0x2cd/0x2e0 [<ffffffff818a3dda>] ? ieee80211_recalc_chanctx_chantype+0x2a/0x2e0 [<ffffffff818a4919>] ieee80211_assign_vif_chanctx+0x1a9/0x770 [<ffffffff818a6220>] __ieee80211_vif_release_channel+0x70/0x130 [<ffffffff818a6dd3>] ieee80211_vif_release_channel+0x43/0xb0 [<ffffffff81885f4e>] ieee80211_stop_ap+0x21e/0x5a0 [<ffffffff8184b9b5>] __cfg80211_stop_ap+0x85/0x520 [<ffffffff8181c188>] __cfg80211_leave+0x68/0x120 [<ffffffff8181c268>] cfg80211_leave+0x28/0x40 [<ffffffff8181c5f3>] cfg80211_netdev_notifier_call+0x373/0x6b0 [<ffffffff8107f965>] notifier_call_chain+0x55/0x110 [<ffffffff8107fa41>] raw_notifier_call_chain+0x11/0x20 [<ffffffff816a8dc0>] call_netdevice_notifiers_info+0x30/0x60 [<ffffffff816a8eb9>] __dev_close_many+0x59/0xf0 [<ffffffff816a9021>] dev_close_many+0x81/0x120 [<ffffffff816aa1c5>] rollback_registered_many+0x115/0x2a0 [<ffffffff816aa3a6>] unregister_netdevice_many+0x16/0xa0 [<ffffffff8187d841>] ieee80211_remove_interfaces+0x121/0x1b0 [<ffffffff8185e0e6>] ieee80211_unregister_hw+0x56/0x110 [<ffffffffa0011ac4>] ath10k_mac_unregister+0x14/0x60 [ath10k_core] [<ffffffffa0014fe7>] ath10k_core_unregister+0x27/0x40 [ath10k_core] [<ffffffffa003b1f4>] ath10k_pci_remove+0x44/0xa0 [ath10k_pci] [<ffffffff81373138>] pci_device_remove+0x28/0x60 [<ffffffff814cb534>] __device_release_driver+0x64/0xd0 [<ffffffff814cbcc8>] driver_detach+0xb8/0xc0 [<ffffffff814cb23a>] bus_remove_driver+0x4a/0xb0 [<ffffffff814cc697>] driver_unregister+0x27/0x50 Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-28carl9170: tx: Replace rcu_assign_pointer() with RCU_INIT_POINTER()Andreea-Cristina Bernat
According to RCU_INIT_POINTER()'s block comment 3.a, it can be used if "3. The referenced data structure has already been exposed to readers either at compile time or via rcu_assign_pointer() -and- a. You have not made -any- reader-visible changes to this structure since then". This case fulfills the conditions above because between the rcu_dereference() call (cvif = rcu_dereference(ar->beacon_iter);) and the rcu_assign_pointer() call there is no update of the "cvif" variable. Therefore, this patch makes the replacement. The following Coccinelle semantic patch was used: @@ identifier v; @@ v = rcu_dereference(...); ... when != rcu_dereference(...); when != v = ...; when != (<+...v...+>)++; when != \(memcpy\|memset\)(...); ( - rcu_assign_pointer + RCU_INIT_POINTER (..., v); | if(...) { ... when != v = ...; - rcu_assign_pointer + RCU_INIT_POINTER (..., v); ... when any } ) Because there are cases where between a “rcu_dereference()” call and a “rcu_assign_pointer()” call might be updates of the value that interests us, the Coccinelle semantic patch ignores them and replaces with "RCU_INIT_POINTER()" only when the update is not happening. Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix channel context timerSujith Manoharan
Setup the channel context correctly. Not doing this was causing beacon loss in a P2P-GO/STA concurrent setup. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add more debug statements for channel contextSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Disable fastcc for channel context modeSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28rt2x00: support Ralink 5362.Canek Peláez Valdés
Signed-off-by: Canek Peláez Valdés <canek@ciencias.unam.mx> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix channel context creationSujith Manoharan
If a new context is being added in addition to the current one, then send the ASSIGN event to abort a running scan since the addition of a context is usually followed by VIF assignment and further operations. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix interface limitsSujith Manoharan
There is no reason why managed/p2p interfaces have to be limited to one. IBSS is the only type that needs a restriction. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Print the event/state in ath_chanctx_eventSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add new chanctx eventsSujith Manoharan
This will be useful in handling addition/change of new channel contexts. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix ath_chanctx_get()Sujith Manoharan
Move it inside a CONFIG_ATH9K_CHANNEL_CONTEXT ifdef since it is not needed otherwise. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Move ath9k_beacon_add_noa to channel.cSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Remove redundant ifdefSujith Manoharan
This was introduced in an earlier patch to handle a compilation warning, but since the channel context code has been mostly isolated, this is not required now. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix channel context variables in ath_softcSujith Manoharan
chanctx_work and next_chan are required only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix 'offchannel' in ath_softcSujith Manoharan
Finally move the 'offchannel' instance in ath_softc inside a CONFIG_ATH9K_CHANNEL_CONTEXT cage. The offchannel usage in ath9k_calculate_iter_data() is closed off with an ifdef for now, since the state/opmode calculation is common for both the channel context mode and the normal mode. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix function argument typeSujith Manoharan
ath9k_vif_iter() was earlier used as an iterator routine when calling a mac80211 utility. This is no longer the case and hence we can mention the argument type explicitly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Use ath_chanctx_check_active properlySujith Manoharan
ath_chanctx_check_active() is required only when channel contexts are used. Make sure that it is not called in normal usage. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add ath9k_offchannel_initSujith Manoharan
This patch adds a routine to setup the offchannel instance in ath_softc. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add ath9k_chanctx_wake_queuesSujith Manoharan
Introduce a function that handles queues in channel context mode. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add wrappers for beacon eventsSujith Manoharan
Using these wrappers allows us to move the 'sched' variable in ath_softc inside CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix function declarationsSujith Manoharan
These routines are required only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix channel context eventsSujith Manoharan
Check if channel context usage is enabled before calling ath_chanctx_event() from various parts of the driver. Also, make sure that ath_chanctx_event() is compiled only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_switch staticSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_get_oper_chan staticSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_offchan_switch staticSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Conditionally compile more functionsSujith Manoharan
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude: ath_scan_complete() ath_roc_complete() ath_offchannel_next() ath_scan_next_channel() ath_scan_channel_duration() Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Exclude more functionsSujith Manoharan
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude more functions: ath_offchannel_channel_change() ath_scan_channel_start() ath_scan_send_probe() Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Conditionally compile a few functionsSujith Manoharan
Exclude these functions when CONFIG_ATH9K_CHANNEL_CONTEXT is not enabled: ath_chanctx_send_vif_ps_frame() ath_chanctx_send_ps_frame() ath_chanctx_defer_switch() ath_chanctx_set_next() Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Cleanup mgd_prepare_tx callbackSujith Manoharan
Rename the callback from ath9k_chanctx_force_active() to ath9k_mgd_prepare_tx(). Also, move it to main.c and group it with the other callbacks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_work staticSujith Manoharan
Also compile it conditionally based on CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add a routine to tear down channel contextsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add a routine for initializing channel contextsSujith Manoharan
Setup the offchannel/sched timers and the chanctx work inside the new function. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28carl9170: Remove redundant protection checkAndreea-Cristina Bernat
The carl9170_op_ampdu_action() function is used only by the mac80211 framework. Since the mac80211 already takes care of checks and properly serializing calls to the driver's function there is no need for the driver to do the same thing. Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Isolate ath9k_use_chanctx module parameterSujith Manoharan
This patch ensures that the module parameter "use_chanctx" is visible only when CONFIG_ATH9K_CHANNEL_CONTEXT is selected. Also register the channel context callbacks with mac80211 only when it is explicitly enabled and compile them out of the driver when CONFIG_ATH9K_CHANNEL_CONTEXT is not selected. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Isolate P2P powersave routinesSujith Manoharan
Use CONFIG_ATH9K_CHANNEL_CONTEXT to conditionally compile P2P-PS code. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Move P2P functions to channel.cSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add a config option for channel contextSujith Manoharan
Channel contexts are supported only for P2P right now, so make sure that the 'normal' path remains unaffected by using a config option. This will also reduce the size of the driver. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add debug informationSujith Manoharan
Add a few statements to debug channel context operation. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Move channel operations to channel.cSujith Manoharan
This reduces clutter in main.c Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Handle failure to allocate HW timerSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add a debug level for channel contextSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath5k: remove redundant null check before kfree()Bob Copeland
kfree() null-checks its argument. Found by smatch. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath5k: ensure led name is null terminatedBob Copeland
Add the missing null termination after strncpy(). This isn't actually a buffer overflow in this case since we use snprintf() appropriately to fill the buffer passed by the caller, but in the interest of not turning this into a bug down the road, go ahead and force termination here. Found by Coverity. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath5k: drop useless comparisonBob Copeland
rxs->rate_idx is unsigned, so it will always be >= 0. Found by Coverity. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ray_cs: Add include guardsRasmus Villemoes
The files ray_cs.h and rayctl.h both contain two thirds of what appears to be an include guard using the macro name RAYLINK_H (both lack the #define). Since RAYLINK_H is not defined anywhere, the #ifndefs are confusing no-ops. Add proper include guards using different macro names. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28bcma: only map wrapper if its address is availableHauke Mehrtens
The Chipcommon B core does not have a wrap address and it would fail here. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28mwifiex: use firmware API revision from GET_HW_SPEC responseAmitkumar Karwar
Newer firmware returns API revision in GET_HW_SPEC command response. We will make use of it instead of parsing this information from FW release number. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28mwifiex: rename macro and variables related to API revisionAmitkumar Karwar
We will remove 'fw' prefix from these variable and macro names and make them generic. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-15 06:27:45 +0000