summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2015-02-25MAINTAINERS: update my email addressAndy Gospodarek
I have been signing off on patches with this address so I'll change it. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25amd-xgbe-phy: PHY KX/KR mode differencesTom Lendacky
The PHY requires different settings for the Decision Feedback Analyzer (DFE) when running in KX mode vs. KR mode. Update the code to change these settings when changing modes in order to provide a more stable link. Additionally, adjust the 10GbE PQ skew default setting to a more sane value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25drm/radeon: only enable DP audio if the monitor supports itAlex Deucher
We were enabling DP secondary streams even if the monitor didn't support them. Fixes display problems on some DP monitors. Tested-by: Jim Boz <jim876@xs4all.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: fix atom aux payload size check for writes (v2)Alex Deucher
The atom aux param interface only supports 4 bits for the total write transfer size (header + payload). This limits us to 12 bytes of payload rather than 16. Add a check for this. Reads are not affected. v2: switch to WARN_ON_ONCE Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: fix 1 RB harvest config setup for TN/RLAlex Deucher
The logic was reversed from what the hw actually exposed. Fixes graphics corruption in certain harvest configurations. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-02-25drm/radeon: enable SRBM timeout interrupt on EG/NIChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: enable SRBM timeout interrupt on SIChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: enable SRBM timeout interrupt on CIK v2Leo Liu
v2: disable it on suspend Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: dump full IB if we hit a packet errorAlex Deucher
Dump the whole IB if we run into an invalid packet. This makes things much easier to debug. bug: https://bugs.freedesktop.org/show_bug.cgi?id=89148 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: disable mclk switching with 120hz+ monitorsAlex Deucher
These tend to be problematic even if the vblank period is long enough. This needs more investigation across a wider range of displays. Disable for now. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=87796 https://bugs.freedesktop.org/show_bug.cgi?id=89198 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-02-25drm/radeon: use drm_mode_vrefresh() rather than mode->vrefreshAlex Deucher
Just in case it hasn't been calculated for the mode. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-02-25drm/radeon: enable native backlight control on old macsNathan-J. Hirschauer
Commit b7bc596ebbe0 ("drm/radeon: disable native backlight control on pre-r6xx asics (v2)") accidently broke backlight control on old mac laptops that use the on-GPU backlight controller. Signed-off-by: Nathan-J. Hirschauer <nathanhi@deepserve.info> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-02-25perf tools: Make sparc64 arch point to sparcDavid Ahern
The recent build changes cause perf to not compile for sparc64 since the arch/sparc64/Build file does not exist: /home/dahern/kernels/linux.git/tools/build/Makefile.build:40: arch/sparc64/Build: No such file or directory Fix by converting the sparc64 RAW_ARCH to sparc ARCH -- similar to what is done for x86_64. Signed-off-by: David Ahern <david.ahern@oracle.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1424306222-96843-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25perf symbols: Define EM_AARCH64 for older OSesDavid Ahern
4886f2ca19f6f added an arm-64 check, but the EM_AARCH64 macro is not defined in older releases (e.g., RHEL6). Define if it is not defined. Signed-off-by: David Ahern <david.ahern@oracle.com> Cc: Victor Kamensky <victor.kamensky@linaro.org> Link: http://lkml.kernel.org/r/1424306017-96797-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25perf top: Fix SIGBUS on sparc64David Ahern
perf-top is terminating due to SIGBUS on sparc64. git bisect points to: commit 82396986032915c1572bfb74b224fcc2e4e8ba7c Author: Arnaldo Carvalho de Melo <acme@redhat.com> Date: Mon Sep 8 13:26:35 2014 -0300 perf evlist: Refcount mmaps We need to know how many fds are using a perf mmap via PERF_EVENT_IOC_SET_OUTPUT, so that we can know when to ditch an mmap, refcount it. This commit added 'int refcnt' to struct perf_mmap and the addition makes the event_copy element no longer 8-byte aligned. Fix by adding __attribute__((aligned(8))) to the event_copy struct member. Signed-off-by: David Ahern <david.ahern@oracle.com> Link: http://lkml.kernel.org/r/1424304198-92028-1-git-send-email-david.ahern@oracle.com [ Switched from 'int pad;' to using __attribute__, David tested/acked that ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25perf tools: Fix probing for PERF_FLAG_FD_CLOEXEC flagAdrian Hunter
Commit f6edb53c4993ffe92ce521fb449d1c146cea6ec2 converted the probe to a CPU wide event first (pid == -1). For kernels that do not support the PERF_FLAG_FD_CLOEXEC flag the probe fails with EINVAL. Since this errno is not handled pid is not reset to 0 and the subsequent use of pid = -1 as an argument brings in an additional failure path if perf_event_paranoid > 0: $ perf record -- sleep 1 perf_event_open(..., 0) failed unexpectedly with error 13 (Permission denied) [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.007 MB /tmp/perf.data (11 samples) ] Also, ensure the fd of the confirmation check is closed and comment why pid = -1 is used. Needs to go to 3.18 stable tree as well. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Based-on-patch-by: David Ahern <david.ahern@oracle.com> Acked-by: David Ahern <david.ahern@oracle.com> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/54EC610C.8000403@intel.com Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25Merge tag 'fixes-v4.0-rc1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for various omap devices. It's all dts and defconfig changes for this set: - Fix wrong DMA properties for dma to avoid them getting copied wrong again before we start actually using them - USB fixes to revert the extcon changes as the driver did not get merged yet and cause issues - Omap5 and dra7 fixes to boot from sata - Fix few am437x issues for i2c and pinctrl - Fix beaglebone for hardwared USB configuration - Defconfig changes for NAND, SATA and TPS62362 - Fix n900 i2c numbering for legacy user space and smc91x register offset so it works also for qemu - Fix incomplete USB configuration for dm816x * tag 'fixes-v4.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-bone*: usb0 is hardwired for peripheral ARM: dts: dra7x-evm: beagle-x15: Fix USB Host ARM: omap2plus_defconfig: Fix SATA boot ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver ARM: dts: dra7: Correct the dma controller's property names ARM: dts: omap5: Correct the dma controller's property names ARM: dts: omap4: Correct the dma controller's property names ARM: dts: omap3: Correct the dma controller's property names ARM: dts: omap2: Correct the dma controller's property names ARM: dts: am437x-idk: fix sleep pinctrl state ARM: omap2plus_defconfig: enable TPS62362 regulator ARM: dts: am437x-idk: fix TPS62362 i2c bus ARM: dts: n900: Fix offset for smc91x ethernet ARM: dts: n900: fix i2c bus numbering ARM: dts: Fix USB dts configuration for dm816x ARM: dts: OMAP5: Fix SATA PHY node ARM: dts: DRA7: Fix SATA PHY node
2015-02-25arm64: Add L2 cache topology to ARM Ltd boards/modelsSudeep Holla
Commit 5d425c18653731af6 ("arm64: kernel: add support for cpu cache information") adds cacheinfo support for ARM64. Since there's no architectural way of detecting the cpus that share particular cache, device tree can be used and the core cacheinfo already supports the same. This patch adds the L2 cache topology on Juno board, FVP/RTSM and foundation models. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-25perf tools: Fix pthread_attr_setaffinity_np build errorAdrian Hunter
Feature detection for pthread_attr_setaffinity_np was failing, producing this error: In file included from bench/futex-hash.c:17:0: bench/futex.h:73:19: error: conflicting types for ‘pthread_attr_setaffinity_np’ static inline int pthread_attr_setaffinity_np(pthread_attr_t *attr, ^ In file included from bench/futex.h:72:0, from bench/futex-hash.c:17: /usr/include/pthread.h:407:12: note: previous declaration of ‘pthread_attr_setaffinity_np’ was here extern int pthread_attr_setaffinity_np (pthread_attr_t *__attr, ^ make[3]: *** [bench/futex-hash.o] Error 1 make[2]: *** [bench] Error 2 make[2]: *** Waiting for unfinished jobs.... This was because compiling test-pthread-attr-setaffinity-np.c failed due to the function arguments: test-pthread-attr-setaffinity-np.c: In function ‘main’: test-pthread-attr-setaffinity-np.c:11:2: warning: null argument where non-null required (argument 3) [-Wnonnull] ret = pthread_attr_setaffinity_np(&thread_attr, 0, NULL); ^ So fix the arguments. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Stephane Eranian <eranian@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1424774766-24194-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25perf tools: Define _GNU_SOURCE on pthread_attr_setaffinity_np feature checkJosh Boyer
The man page for pthread_attr_set_affinity_np states that _GNU_SOURCE must be defined before pthread.h is included in order to get the proper function declaration. Define this in the Makefile. Without this defined, the feature check fails on a Fedora system with gcc5 and then the perf build later fails with conflicting prototypes for the function. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: http://lkml.kernel.org/r/20150211162404.GA15522@hansolo.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25Merge branch 'clockevents/4.0-rc1' of ↵Ingo Molnar
git://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull clockevents driver fixes from Daniel Lezcano: - Fix the Kconfig to prevent the asm9260 timer to be compiled with allyesconfig with sparc/sparc64 (Daniel Lezcano) - Reorder the mtk driver init sequence in order to prevent a potential race when the clock is registered before the irq handler is set (Matthias Brugger) - Fix a section mismatch for the pxa driver (Robert Jarzmik) Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-25clocksource: pxa: Fix section mismatchRobert Jarzmik
As pxa_timer_common_init() is only called in init context, mark it as such, and quiesce the compiler warnings : WARNING: vmlinux.o(.text.unlikely+0x45d4): Section mismatch in reference from the function pxa_timer_common_init() to the function .init.text:sched_clock_register() WARNING: vmlinux.o(.text.unlikely+0x4610): Section mismatch in reference from the function pxa_timer_common_init() to the function .init.text:clocksource_mmio_init() Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-02-25clocksource: mtk: Fix race conditions in probe codeMatthias Brugger
We have two race conditions in the probe code which could lead to a null pointer dereference in the interrupt handler. The interrupt handler accesses the clockevent device, which may not yet be registered. First race condition happens when the interrupt handler gets registered before the interrupts get disabled. The second race condition happens when the interrupts get enabled, but the clockevent device is not yet registered. Fix that by disabling the interrupts before we register the interrupt and enable the interrupts after the clockevent device got registered. Reported-by: Gongbae Park <yongbae2@gmail.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-02-25clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfigDaniel Lezcano
The Kconfig options for the asm9260 timer is wrong as it can be selected by another platform with allyes config and thus leading to a compilation failure as some non arch related code is pulled by the compilation. Fix this by having the platform Kconfig to select the timer as it is done for the others drivers. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Oleksij Rempel <linux@rempel-privat.de> Conflicts: drivers/clocksource/Kconfig
2015-02-25drm/i915: Fix frontbuffer false positve.Rodrigo Vivi
This return 0 without setting atomic bits on fb == crtc->cursor->fb where causing frontbuffer false positives. According to Daniel: The original regression seems to have been introduced in the original check/commit split: commit 757f9a3e5b8a812af0c213099a5b31cb423f4d3c Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Date: Wed Sep 24 14:20:24 2014 -0300 drm/i915: move check of intel_crtc_cursor_set_obj() out Which already cause other trouble, resulting in the check getting moved in commit e391ea882b1a04fb3f559287ac694652a3cd9da9 Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Date: Wed Sep 24 14:20:25 2014 -0300 drm/i915: Fix not checking cursor and object sizes The frontbuffer tracking itself only was broken when we shifted it into the check/commit logic with: commit 32b7eeec4d1e861230b09d437e95d76c86ff4a68 Author: Matt Roper <matthew.d.roper@intel.com> Date: Wed Dec 24 07:59:06 2014 -0800 drm/i915: Refactor work that can sleep out of commit (v7) v2: When putting more debug prints I notice the solution was simpler than I thought. AMS design is solid, just this return was wrong. Sorry for the noise. v3: Remove the entire chunck that would probably be removed by gcc anyway. (by Daniel) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-25ALSA: hda - Disable runtime PM for Panther Point againTakashi Iwai
This is essentially a partial revert of the commit [b1920c21102a: 'ALSA: hda - Enable runtime PM on Panther Point']. There was a bug report showing the HD-audio bus hang during runtime PM on HP Spectre XT. Reported-by: Dang Sananikone <dang.sananikone@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-24eCryptfs: ensure copy to crypt_stat->cipher does not overrunColin Ian King
The patch 237fead61998: "[PATCH] ecryptfs: fs/Makefile and fs/Kconfig" from Oct 4, 2006, leads to the following static checker warning: fs/ecryptfs/crypto.c:846 ecryptfs_new_file_context() error: off-by-one overflow 'crypt_stat->cipher' size 32. rl = '0-32' There is a mismatch between the size of ecryptfs_crypt_stat.cipher and ecryptfs_mount_crypt_stat.global_default_cipher_name causing the copy of the cipher name to cause a off-by-one string copy error. This fix ensures the space reserved for this string is the same size including the trailing zero at the end throughout ecryptfs. This fix avoids increasing the size of ecryptfs_crypt_stat.cipher and also ecryptfs_parse_tag_70_packet_silly_stack.cipher_string and instead reduces the of ECRYPTFS_MAX_CIPHER_NAME_SIZE to 31 and includes the + 1 for the end of string terminator. NOTE: An overflow is not possible in practice since the value copied into global_default_cipher_name is validated by ecryptfs_code_for_cipher_string() at mount time. None of the allowed cipher strings are long enough to cause the potential buffer overflow fixed by this patch. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [tyhicks: Added the NOTE about the overflow not being triggerable] Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
2015-02-25md: mark some attributes as pre-allocNeilBrown
Since __ATTR_PREALLOC was introduced in v3.19-rc1~78^2~18 it can now be used by md. This ensure that writing to these sysfs attributes will never block due to a memory allocation. Such blocking could become a deadlock if mdmon is trying to reconfigure an array after a failure prior to re-enabling writes. Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-25raid5: check faulty flag for array status during recovery.Eric Mei
When we have more than 1 drive failure, it's possible we start rebuild one drive while leaving another faulty drive in array. To determine whether array will be optimal after building, current code only check whether a drive is missing, which could potentially lead to data corruption. This patch is to add checking Faulty flag. Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-25md/raid1: fix read balance when a drive is write-mostly.Tomáš Hodek
When a drive is marked write-mostly it should only be the target of reads if there is no other option. This behaviour was broken by commit 9dedf60313fa4dddfd5b9b226a0ef12a512bf9dc md/raid1: read balance chooses idlest disk for SSD which causes a write-mostly device to be *preferred* is some cases. Restore correct behaviour by checking and setting best_dist_disk and best_pending_disk rather than best_disk. We only need to test one of these as they are both changed from -1 or >=0 at the same time. As we leave min_pending and best_dist unchanged, any non-write-mostly device will appear better than the write-mostly device. Reported-by: Tomáš Hodek <tomas.hodek@volny.cz> Reported-by: Dark Penguin <darkpenguin@yandex.ru> Signed-off-by: NeilBrown <neilb@suse.de> Link: http://marc.info/?l=linux-raid&m=135982797322422 Fixes: 9dedf60313fa4dddfd5b9b226a0ef12a512bf9dc Cc: stable@vger.kernel.org (3.6+)
2015-02-24r8169: Fix trivial typo in rtl_check_firmwareYannick Guerrini
Change 'firwmare' to 'firmware' Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24xen-netback: release pending index before pushing Tx responsesDavid Vrabel
If the pending indexes are released /after/ pushing the Tx response then a stale pending index may be used if a new Tx request is immediately pushed by the frontend. The may cause various WARNINGs or BUGs if the stale pending index is actually still in use. Fix this by releasing the pending index before pushing the Tx response. The full barrier for the pending ring update is not required since the the Tx response push already has a suitable write barrier. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24af_packet: don't pass empty blocks for PACKET_V3Alexander Drozdov
Before da413eec729d ("packet: Fixed TPACKET V3 to signal poll when block is closed rather than every packet") poll listening for an af_packet socket was not signaled if there was no packets to process. After the patch poll is signaled evety time when block retire timer expires. That happens because af_packet closes the current block on timeout even if the block is empty. Passing empty blocks to the user not only wastes CPU but also wastes ring buffer space increasing probability of packets dropping on small timeouts. Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com> Cc: Dan Collins <dan@dcollins.co.nz> Cc: Willem de Bruijn <willemb@google.com> Cc: Guy Harris <guy@alum.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24rtnetlink: avoid 0 sized arraysSasha Levin
Arrays (when not in a struct) "shall have a value greater than zero". GCC complains when it's not the case here. Fixes: ba7d49b1f0 ("rtnetlink: provide api for getting and setting slave info") Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24mac80211/minstrel: fix !x!=0 confusionJiri Slaby
Commit 06d961a8e210 ("mac80211/minstrel: use the new rate control API") inverted the condition 'if (msr->sample_limit != 0)' to 'if (!msr->sample_limit != 0)'. But it is confusing both to people and compilers (gcc5): net/mac80211/rc80211_minstrel.c: In function 'minstrel_get_rate': net/mac80211/rc80211_minstrel.c:376:26: warning: logical not is only applied to the left hand side of comparison if (!msr->sample_limit != 0) ^ Let there be only 'if (!msr->sample_limit)'. Fixes: 06d961a8e210 ("mac80211/minstrel: use the new rate control API") Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-24thermal: exynos: Clean-up code to use oneline entry for exynos compatible tableChanwoo Choi
This patch cleanup the code to use oneline for entry of exynos compatible table. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-24thermal: rcar: Make error and remove paths symmetrical with initGeert Uytterhoeven
Swap interrupt disable and thermal zone unregistration in the error and remove paths, to make them more symmetrical with the initialization path. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-24thermal: rcar: Fix race condition between init and interruptGeert Uytterhoeven
As soon as the interrupt has been enabled by devm_request_irq(), the interrupt routine may be called, depending on the current status of the hardware. However, at that point rcar_thermal_common hasn't been initialized complely yet. E.g. rcar_thermal_common.base is still NULL, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000c pgd = c0004000 [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc7-ape6evm-04564-gb6e46cb7cbe82389 #30 Hardware name: Generic R8A73A4 (Flattened Device Tree) task: ee8953c0 ti: ee896000 task.ti: ee896000 PC is at rcar_thermal_irq+0x1c/0xf0 LR is at _raw_spin_lock_irqsave+0x48/0x54 Postpone the call to devm_request_irq() until all initialization has been done to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-24firmware: dmi_scan: Fix dmi_len typeIvan Khoronzhuk
According to SMBIOSv3 specification the length of DMI table can be up to 32bits wide. So use appropriate type to avoid overflow. It's obvious that dmi_num theoretically can be more than u16 also, so it's can be changed to u32 or at least it's better to use int instead of u16, but on that moment I cannot imagine dmi structure count more than 65535 and it can require changing type of vars that work with it. So I didn't correct it. Acked-by: Ard Biesheuvel <ard@linaro.org> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2015-02-24efi/libstub: Fix boundary checking in efi_high_alloc()Yinghai Lu
While adding support loading kernel and initrd above 4G to grub2 in legacy mode, I was referring to efi_high_alloc(). That will allocate buffer for kernel and then initrd, and initrd will use kernel buffer start as limit. During testing found two buffers will be overlapped when initrd size is very big like 400M. It turns out efi_high_alloc() boundary checking is not right. end - size will be the new start, and should not compare new start with max, we need to make sure end is smaller than max. [ Basically, with the current efi_high_alloc() code it's possible to allocate memory above 'max', because efi_high_alloc() doesn't check that the tail of the allocation is below 'max'. If you have an EFI memory map with a single entry that looks like so, [0xc0000000-0xc0004000] And want to allocate 0x3000 bytes below 0xc0003000 the current code will allocate [0xc0001000-0xc0004000], not [0xc0000000-0xc0003000] like you would expect. - Matt ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2015-02-24thermal: Introduce dummy functions when thermal is not definedNishanth Menon
When CONFIG_THERMAL is not enabled, it is better to introduce equivalent dummy functions in the exported header than to introduce #ifdeffery in drivers using the function. This will prevent issues such as that reported in: http://www.spinics.net/lists/linux-next/msg31573.html While at it switch over to IS_ENABLED for thermal macros to allow for thermal framework to be built as framework and relevant APIs be usable by relevant drivers as a result. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-24ARM: dts: am335x-bone*: usb0 is hardwired for peripheralRobert Nelson
Fixes: http://bugs.elinux.org/issues/127 the bb.org community was seeing random reboots before this change. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: dra7x-evm: beagle-x15: Fix USB HostRoger Quadros
In commit 87517d26d888 ("ARM: dts: dra7-evm: Add extcon nodes for USB") we enabled Extcon USB gpio to tackle the USB ID pin and get peripheral mode to work. But the extcon-gpio-usb driver [1] didn't make it into v4.0 and this makes the USB driver defer probe indefinitely breaking USB Host functionality. As a temporary fix we remove the extcon handle from the USB controller and add it back when the extcon driver merges in v4.1. [1] - https://lkml.org/lkml/2015/2/2/187 Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: omap2plus_defconfig: Fix SATA bootRoger Quadros
SATA operation depends on PIPE3 PHY and if we want to boot from SATA drives, we have to have the PIPE3 PHY driver built-in. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: omap2plus_defconfig: Enable OMAP NAND BCH driverRoger Quadros
Without this NAND doesn't work on most EVMs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: dra7: Correct the dma controller's property namesPeter Ujfalusi
According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: omap5: Correct the dma controller's property namesPeter Ujfalusi
According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: omap4: Correct the dma controller's property namesPeter Ujfalusi
According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: omap3: Correct the dma controller's property namesPeter Ujfalusi
According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24ARM: dts: omap2: Correct the dma controller's property namesPeter Ujfalusi
According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 19:53:32 +0000