summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-08-22tokenring: remove unneeded NULL checksDan Carpenter
"fw_entry" is always non-NULL at this point and anyway release_firmware() handles NULL parameters. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21net_sched: cls_flow: add key rxhashChangli Gao
We can use rxhash to classify the traffic into flows. As rxhash maybe supplied by NIC or RPS, it is cheaper. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21irda: use net_device_stats from struct net_deviceEric Dumazet
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the irlan_cb struct. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-08-21amd8111e: use net_device_stats from struct net_deviceEric Dumazet
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the amd8111e_priv struct. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21atl1c: use net_device_stats from struct net_deviceEric Dumazet
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the atl1c_adapter struct. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)Dmitry Kozlov
PPP: introduce "pptp" module which implements point-to-point tunneling protocol using pppox framework NET: introduce the "gre" module for demultiplexing GRE packets on version criteria (required to pptp and ip_gre may coexists) NET: ip_gre: update to use the "gre" module This patch introduces then pptp support to the linux kernel which dramatically speeds up pptp vpn connections and decreases cpu usage in comparison of existing user-space implementation (poptop/pptpclient). There is accel-pptp project (https://sourceforge.net/projects/accel-pptp/) to utilize this module, it contains plugin for pppd to use pptp in client-mode and modified pptpd (poptop) to build high-performance pptp NAS. There was many changes from initial submitted patch, most important are: 1. using rcu instead of read-write locks 2. using static bitmap instead of dynamically allocated 3. using vmalloc for memory allocation instead of BITS_PER_LONG + __get_free_pages 4. fixed many coding style issues Thanks to Eric Dumazet. Signed-off-by: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21net: rps: fix the wrong network header pointerChangli Gao
__skb_get_rxhash() was broken after the commit: commit bfb564e7391340638afe4ad67744a8f3858e7566 Author: Krishna Kumar <krkumar2@in.ibm.com> Date: Wed Aug 4 06:15:52 2010 +0000 core: Factor out flow calculation from get_rps_cpu Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-20net/sched: add ACT_CSUM action to update packets checksumsGrégoire Baron
net/sched: add ACT_CSUM action to update packets checksums ACT_CSUM can be called just after ACT_PEDIT in order to re-compute some altered checksums in IPv4 and IPv6 packets. The following checksums are supported by this patch: - IPv4: IPv4 header, ICMP, IGMP, TCP, UDP & UDPLite - IPv6: ICMPv6, TCP, UDP & UDPLite It's possible to request in the same action to update different kind of checksums, if the packets flow mix TCP, UDP and UDPLite, ... An example of usage is done in the associated iproute2 patch. Version 3 changes: - remove useless goto instructions - improve IPv6 hop options decoding Version 2 changes: - coding style correction - remove useless arguments of some functions - use stack in tcf_csum_dump() - add tcf_csum_skb_nextlayer() to factor code Signed-off-by: Gregoire Baron <baronchon@n7mm.org> Acked-by: jamal <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-20net: build_ehash_secret() and rt_bind_peer() cleanupsEric Dumazet
Now cmpxchg() is available on all arches, we can use it in build_ehash_secret() and rt_bind_peer() instead of using spinlocks. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlge: pull NULL check ahead of dereferenceDan Carpenter
There was a dereference before NULL check issue introduced in 1e213303d "qlge: Add tx multiqueue support." I've pulled the NULL check of "net_rsp" forward a couple lines to avoid that. Also Ron Mercer says that the early exit should be above the index write. ql_write_cq_idx(rx_ring); Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19tehuti: Use net_device_stats from struct net_deviceTobias Klauser
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the bdx_priv struct. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ep93xx_eth: Use net_device_stats from struct net_deviceTobias Klauser
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the ep93xx_priv struct. As the new ndo_get_stats function would just return dev->stats we can omit it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19net_sched: sch_sfq: use proto_ports_offset() to support AH messageChangli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19netfilter: xt_hashlimit: use proto_ports_offset() to support AH messageChangli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19netfilter: ipt_CLUSTERIP: use proto_ports_offset() to support AH messageChangli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19net_sched: cls_flow: use proto_ports_offset() to support AH messageChangli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19net: rps: use proto_ports_offset() to handle the AH message correctlyChangli Gao
The SPI isn't at the beginning of an AH message. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19net: introduce proto_ports_offset()Changli Gao
Introduce proto_ports_offset() for getting the position of the ports or SPI in the message of a protocol. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19net: rps: skip fragment when computing rxhashChangli Gao
Fragmented IP packets may have no transfer header, so when computing rxhash, we should skip them. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19net: rps: reset network header before calling skb_get_rxhash()Changli Gao
skb_get_rxhash() assumes the network header pointer of the skb is set properly after the commit: commit bfb564e7391340638afe4ad67744a8f3858e7566 Author: Krishna Kumar <krkumar2@in.ibm.com> Date: Wed Aug 4 06:15:52 2010 +0000 core: Factor out flow calculation from get_rps_cpu Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-08-19qlcnic: update version 5.0.8Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: rom lock recoverySucheta Chakraborty
Fw can get stuck while holding pci semaphore. Driver will not be able to perform fw initialization, without this lock. Release semaphore forcefully in that case. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: firmware initialization updateSony Chacko
Cleanup legacy code which is not valid for Qlogic CNA adapters. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: fix endiness in eswitch statisticsAmit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: mark device state as failedAmit Kumar Salecha
Mark device state failed in error path. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: fix npar stateAmit Kumar Salecha
Privilege functions should wait for npar state to be operational. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: support anti mac spoofingSony Chacko
Administrator can configure to drop packet in transmit, if it doesn't match interface mac address, in case of virtual function. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: configure offload setting on eswitchRajesh Borundia
Device is not capable of enabling/disabling offload setting per port in case of Nic Partition.So offload settings needs to be enabled/disabled per eswitch and it will affect all the function on that eswitch. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: configure port on eswitchRajesh Borundia
o Nic partition capable devices has embedded switch, this needs to support various features like external switch. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: replace magic numbers with definesSony Chacko
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: remove unused codeSony Chacko
Serial number references are not used in driver. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: fix inconsistent lock stateAmit Kumar Salecha
Spin_lock(rds_ring->lock) is not required while posting buffers from qlcnic_open and freeing buffers from qlcnic_down. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: rewrite ethtool test to use standard config functionsAlexander Duyck
This change makes it so that the ethtool loopback test uses the standard ring configuration and allocation functions. As a result the loopback test will be much more effective at testing core driver functionality. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: update all DESC_ADV macros to accept a ring pointerAlexander Duyck
All of the DESC_ADV macros are currently needing the pointers to be de-referenced before accessing the ring. Instead of having to add all of the asterisks it is easier to just update the macro to expect a pointer to the ring. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: combine Rx into into ixgbe_configure_rxAlexander Duyck
The Rx init is currently split over ixgbe_configure, ixgbe_configure_rx, and ixgbe_up_complete. Instead of leaving it split over 3 function it is easier to consolidate them all into ixgbe_configure_rx. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: pull all Tx init into ixgbe_configure_txAlexander Duyck
The Tx init was spread out over ixgbe_configure, ixgbe_configure_tx, and ixgbe_up_complete. This change combines all of that into the ixgbe_configure_tx function in order to simplify the Tx init path. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: move all GPIE register config into a single functionAlexander Duyck
This change moves all GPIE register configuration into a single function. The advantage of this is that we can avoid a number of unnecessary read/modify/write cycles on the register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: Move virtualization config into a separate functionAlexander Duyck
This change moves the configuration that was done in configure_rx into a separate virtualization configuration function. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: move all Rx DMA control register writes to one central locationAlexander Duyck
This change moves all of the Rx DMA control register writes to one central location. This should help to avoid accidentally overwriting existing settings. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: Move max frame size and Rx buffer length configuration into a functionAlexander Duyck
This change consolidates all of the Rx max frame size and Rx buffer length configuration into a single function. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: remove redundant configuration of vmolr, rename generic variableAlexander Duyck
The vmolr is configured already in ixgbe_set_rx_mode for the PF so there is no need to set it again in ixgbe_configure_rx. Instead of using the variable name reg, it is easier to just rename it to gcr_ext to reflect the register contents that the variable holds. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: bump PS header size to 512 bytesAlexander Duyck
Bump the header size for packet split to 512 bytes since this makes the best use of the 1k buffer that is allocated for any skb 512 bytes or smaller. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: combine accesses to FCTRL register into ixgbe_set_rx_modeAlexander Duyck
We are accessing the FCTRL register in multiple spots in the init path and we can simplify things by combining the configuration all into ixgbe_set_rx_mode. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: pull PSRTYPE configuration into a separate functionAlexander Duyck
The configuration of PSRTYPE was being done conditionally on if packet split is enabled or not. It can be configured always since it will not have any effect when packet split is not enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: pull ring configuration into it's own functionAlexander Duyck
These changes add ixgbe_configure_rx_ring which is used to setup the base function pointers for the ring. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: consolidate all setting of MRQC into one functionAlexander Duyck
This change simplifies the configuration of MRQC by consolidating the setting of it into one function. As such the register is no longer set in multiple places which should make any future changes easier to work with. In addition we can combine RSS related register writes into the call since enabling all of those bits without enabling RSS itself in MRQC should have no effect. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: move Tx ring configuration into a separate functionAlexander Duyck
This patch moves the Tx ring configuration into a separate function. In addition the function drops the setting of the head writeback RO bit since head writeback is no longer used within ixgbe. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: move configuration of the MTQC register into it's own functionAlexander Duyck
This patch moves the configuration of the MTQC register into it's own function call similar to ixgbe_setup_mrqc. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-18 08:32:49 +0000