summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2008-12-30V4L/DVB (10123): em28xx: fix reversed definitions of I2S audio modesDevin Heitmueller
Noticed when doing the audio support for the Pinnacle PCTV HD Ultimate 808e that the modes were incorrect (the 808e uses I2S in 5 sample mode) Thanks for Ray Lu from Empia for providing the em2860/em2880 datasheet. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10122): em28xx: don't load em28xx-alsa for em2870 based devicesDevin Heitmueller
Like the em2874, the em2870 does not have any analog support, so don't bother loading the em28xx-alsa module. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10121): em28xx: remove worthless Pinnacle PCTV HD Mini 80e device ↵Devin Heitmueller
profile The Pinnacle 80e cannot be supported since Micronas yanked their driver support for the drx-j chipset at the last minute. Remove the device profile since it cannot work without the drx driver and it being there is only likely to confuse people into thinking the device is supported but not working. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10120): em28xx: remove redundant Pinnacle Dazzle DVC 100 profileDevin Heitmueller
The DVC 100 profile is redundant since we already have an existing identical profile named "Pinnacle Dazzle DVC 90/DVC 100" Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10119): em28xx: fix corrupted XCLK valueDevin Heitmueller
Correct problem introduced during the board refactoring where the XCLK frequency would get zero'd out. The sequence of events was as follows: em28xx_pre_card_setup() called em28xx_set_model() em28xx_set_model() would memcpy to dev->board configuration em28xx_pre_card_setup() would set the dev->board.xclk if not set em28xx_pre_card_setup() would set the XCLK register based on dev->board.xclk ... em28xx_card_setup() would call em28xx_set_model() em28xx_set_model() would memcpy to dev->board configuration (clearing out value of dev->board.xclk set in em28xx_pre_card_setup) ... em28xx_audio_analog_set() sets the XCLK register based on dev->board.xclk (which now contains zero) The change sets the default XCLK and I2C Clock fields in the board definition inside of em28xx_set_model() so that subsequent calls do not cause the values to be overwritten. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10118): zoran: fix warning for a variable not usedMauro Carvalho Chehab
Fix this warning: drivers/media/video/zoran/zoran_card.c:156: warning: ‘zr36067_pci_tbl’ defined but not used Currently, zoran driver relies on a find routine that doesn't use the pci table. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10116): af9013: Fix gcc false warningsMauro Carvalho Chehab
drivers/media/dvb/frontends/af9013.c: In function ‘af9013_set_coeff’: drivers/media/dvb/frontends/af9013.c:231: warning: ‘ns_coeff2_8k’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:230: warning: ‘ns_coeff2_2k’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:229: warning: ‘ns_coeff1_8193nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:228: warning: ‘ns_coeff1_8192nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:227: warning: ‘ns_coeff1_8191nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:226: warning: ‘ns_coeff1_2048nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c: In function ‘af9013_update_snr’: drivers/media/dvb/frontends/af9013.c:1012: warning: ‘snr_table’ may be used uninitialized in this function Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10111a): usbvideo.h: remove an useless blank lineMauro Carvalho Chehab
This is needed to sync with the development tree. Probably, a merge conflict were solved by adding this blank line. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10111): quickcam_messenger.c: fix a warningMauro Carvalho Chehab
drivers/media/video/usbvideo/quickcam_messenger.c: In function ‘qcm_sensor_init’: drivers/media/video/usbvideo/quickcam_messenger.c:450: warning: operation on ‘ret’ may be undefined Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10110): v4l2-ioctl: Fix warnings when using .unlocked_ioctl = ↵Mauro Carvalho Chehab
__video_ioctl2 This patch fixes this warning: drivers/media/video/gspca/gspca.c:1811: warning: initialization from incompatible pointer type The reason is that the returned argument should be a long, not an integer. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10109): anysee: Fix usage of an unitialized functionMauro Carvalho Chehab
drivers/media/dvb/dvb-usb/anysee.c: In function ‘anysee_master_xfer’: drivers/media/dvb/dvb-usb/anysee.c:156: warning: ‘ret’ may be used uninitialized By looking at the function, altrough very unlikely, this might eventually be true if num = 0. So, better to fix the warning by initializing with ret = 0. Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10104): uvcvideo: Add support for video output devicesLaurent Pinchart
Extend the range of supported UVC devices by allowing video output devices matching the following structure: TT_STREAMING -> VC_PROCESSING_UNIT -> VC_EXTENSION_UNIT{0,n} -> OTT_* Video output devices are reported with the V4L2_CAP_VIDEO_OUTPUT capability flag and are subject to the same restrictions as video input devices. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10102): uvcvideo: Ignore interrupt endpoint for built-in iSight ↵Laurent Pinchart
webcams. Built-in iSight webcams have an interrupt endpoint but spit proprietary data that don't conform to the UVC status endpoint messages. Don't try to handle the interrupt endpoint for those cameras. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10101): uvcvideo: Fix bulk URB processing when the header is erroneousLaurent Pinchart
When the first bulk URB of a video payload contains an erroneous header, or when no V4L2 buffer is available, the whole payload must be dropped. Change the skip logic to drop all bulk URBs until the end of the payload instead of the first one only. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10099): soc-camera: add support for MT9T031 CMOS camera sensor from ↵Guennadi Liakhovetski
Micron This camera is rather similar to MT9M001, but also has a couple of enhanced features, like pixel binning. create mode 100644 drivers/media/video/mt9t031.c Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10098): ov772x: fix try_fmt calculation methodKuninori Morimoto
Don't modify driver's state in try_fmt, just verify format acceptability or adjust it to driver's capabilities. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10097): ov772x: clear i2c client data on error and removeKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10096): ov772x: change dev_info to dev_dbgKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10095): The failure of set_fmt is solved in tw9910Kuninori Morimoto
priv->scale is checked in start_capture. Therefore, it should be NULL if failing in set_fmt. This patch resolve this problem. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10094): Add tw9910 driverKuninori Morimoto
This patch adds tw9910 driver that use soc_camera framework. It was tested on SH Migo-r board and mplayer. create mode 100644 drivers/media/video/tw9910.c create mode 100644 include/media/tw9910.h Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10093): soc-camera: add new bus width and signal polarity flagsGuennadi Liakhovetski
In preparation for i.MX31 camera host driver add flags for 4 and 15 bit bus widths and for data lines polarity inversion. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10092): Change V4L2 field to ANY from NONE on sh_mobile_ceu_camera.cKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10091): mt9m001 mt9v022: simplify pointer dereferncesGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10090): soc-camera: let drivers decide upon supported field valuesGuennadi Liakhovetski
sh_mobile_ceu_camera.c is already prepared to support interlaced format, this patch moves the choice of a field type down to host and / or camera drivers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10089): Add interlace support to sh_mobile_ceu_camera.cKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10088): video: sh_mobile_ceu cleanups and commentsMagnus Damm
This patch cleans up the sh_mobile_ceu driver and adds comments and constants to clarify the magic sequence in sh_mobile_ceu_capture(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10087): Add new enum_input function on soc_cameraKuninori Morimoto
This patch presents new method to be able to select V4L2 input type Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10086): Add new set_std function on soc_cameraKuninori Morimoto
This patch presents new method to be able to check v4l2_std_id Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10085): sh_mobile_ceu: add NV16 and NV61 supportMagnus Damm
This patch adds NV16/NV61 support to the sh_mobile_ceu driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10084): sh_mobile_ceu: add NV12 and NV21 supportMagnus Damm
This patch adds NV12/NV21 support to the sh_mobile_ceu driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10083): soc-camera: unify locking, play nicer with videobuf lockingGuennadi Liakhovetski
Move mutex from host drivers to camera device object, take into account videobuf locking. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10081): pxa-camera: call try_fmt() camera device method with ↵Guennadi Liakhovetski
correct pixel format With the introduction of the format conversion support in soc-camera, we now also have to take care to pass the correct pixel format to the camera driver when calling its try_fmt() method. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10080): soc-camera: readability improvements, more strict ↵Guennadi Liakhovetski
operations checks Simplify multiple drivers by replacing f->fmt.pix.* with a single pointer dereference, merge some needlessly broken lines, verify host and camera operations pointers on registration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10079): sh_mobile_ceu: use new pixel format translation codeMagnus Damm
This patch converts the sh_mobile_ceu driver to make use of the new pixel format translation code. Only pass-though mode at this point. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10078): video: add NV16 and NV61 pixel formatsMagnus Damm
This patch adds support for NV16 and NV61 pixel formats. These pixel formats use two planes; one for 8-bit Y values and one for interleaved 8-bit U and V values. NV16/NV61 formats are very similar to NV12/NV21 with the exception that NV16/NV61 are using the same number of lines for both planes. The difference between NV16 and NV61 is the U and V byte order. The fourcc values are extrapolated from the NV12/NV21 case. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10077): mt9m111: add support for mt9m112 since sensors seem identicalMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10076): v4l: add chip ID for MT9M112 camera sensor from MicronMike Rapoport
The chip is largely compatible with MT9M111 and is going to be supported by the same driver. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10075): pxa-camera: setup the FIFO inactivity time-out registerGuennadi Liakhovetski
Using PXA270's FIFO inactivity time-out register (CITOR) reduces FIFO overruns. The time-out is calculated in CICLK / LCDCLK ticks and has to be longer than one pixel time. For this we have to know the pixel clock frequency, which usually is provided by the camera. We use the struct soc_camera_sense to request PCLK frequency from the camera driver upon each data format change. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10074): soc-camera: add camera sense dataGuennadi Liakhovetski
Add a struct soc_camera_sense, that can be used by camera host drivers to request additional information from a camera driver, for example, when changing data format. This struct can be extended in the future, its first use is to request the camera driver whether the pixel-clock frequency has changed. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10073): mt9m111: Add automatic white balance controlRobert Jarzmik
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10072): soc-camera: Add signal inversion flags to be used by camera ↵Guennadi Liakhovetski
drivers As reported by Antonio Ospite <ospite@studenti.unina.it> two platforms with a mt9m111 camera require opposite pixel clock polarity, which means one of them inverts it. This patch adds support for inversion flags and switches all available camera drivers to using them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB: pxa-camera: use memory mapped IO access for camera (QCI) registersEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10107): More than one driver defines the same var name ↵Mauro Carvalho Chehab
(dump_bridge). Add "static" on stv06xx for all static functions and parameters to avoid such troubles. Cc: Erik Andren <erik.andren@gmail.com> Cc: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10106): gscpa - stv06xx: Fix compilation with kernel treeMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10069): Add ov7725 support to ov772x driverKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10068): Change device ID selection method on ov772x driverKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10067): Remove ov772x_default_regs from ov772x driverKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10066): mt9m001 mt9v022: fix bus-width switch GPIO availability testGuennadi Liakhovetski
Testing for non-NULL platform-data is not enough, we have to check if the GPIO in the platform data is valid or not. Also see my earlier patch: [ARM] pxa/pcm990: use negative number for an invalid GPIO in camera data Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10065): mt9m111: add all yuv format combinations.Robert Jarzmik
The Micron mt9m111 offers 4 byte orders for YCbCr output. This patchs adds all possible outputs capabilities to the mt9m111 driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10064): mt9m111: mt9m111_get_global_gain() - unsigned >= 0 is ↵roel kluin
always true unsigned >= 0 is always true and fix formula Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-19 08:13:10 +0000