summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-06-18iwlagn: Add power_level module parameterWey-Yi Guy
Add power_level module parameter to set the default power save level. Power save level has range from 1 - 5, default power save level is 1. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: add power_save module parameterWey-Yi Guy
Add power_save module parameter to enable power management if needed Default power management is disabled. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: store the irq number to iwl_bus just like devEmmanuel Grumbach
Since the irq number is just an unsigned int, store it inside iwl_bus instead of calling the get_irq ops every time it is needed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: warn about nested SYNC commandsEmmanuel Grumbach
Since there is no protection around SYNC host command mechanism, at least WARN when collision happens between two SYNC host comamnds. I am not sure there is a real issue (beyond the HCMD_ACTIVE flag maintenance) with having two SYNC host commands at the same time, but at least now, we will know about it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: fix misplaced bracketEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: waterfall the bus level if prepare card failedEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: finally kill the pointer to pci_dev from iwl-dev.hEmmanuel Grumbach
All pci related stuff is in iwl-pci.c. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: add a get_irq method to iwl_bus_ops and use itEmmanuel Grumbach
In order to remove a few more dereference to priv->pdev that will be killed [Asoon, there is now a method to get the IRQ number. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: don't read the PCI_REVISION_ID from iwl-agn.cEmmanuel Grumbach
The PCI_REVISION_ID is read and printed in iwl_pci_probe anyway using pr_info Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: add a method to get the HW ID description as a string to iwl_bus_opsEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: move PCI power related functions to the PCI layerWey-Yi Guy
Continue to popule the PCI layer and the iwl_bus_ops with the power related stuff. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: don't use the PCI wrappers for DMA operationEmmanuel Grumbach
Get a pointer to the struct device during probe and get the rid of all the PCI specific DMA wrappers. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: move PCI related operations from probe and remove to PCI layerEmmanuel Grumbach
Since we have now a PCI layer, all the init and deinit code that is PCI related should move to there. Also move the IO functions: read8/read32/write32. They need hw_base which is killed from priv. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: add get_dev to iwl_bus_opsEmmanuel Grumbach
Bus specific layer must know how to return the struct device* of the device. Implement that as a callback of iwl_bus_ops and use that callback instead of using the priv->pdev pointer which is meant to disappear soon. Since the struct device * is needed in hot path, iwl_bus holds a pointer to it instead of calling get_dev all the time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: introduce iwl_bus and iwl_bus_opsEmmanuel Grumbach
iwl_bus will represent a bus, and iwl_bus_ops all the operations that can be done on this bus. For the moment only set_prv_data is implemented. More to come... Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: remove uneeded include to pci.h and dma_mapping.h from a few filesEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: add a iwl_pci.[ch] files that will contain all PCI specific codeEmmanuel Grumbach
Move some PCI functionality to the new iwl_pci.[ch] files: * the PCI_DEVICE_TABLE * the pci_driver struct definition * the PCI probe / remove functions * the PCI suspend / resume functions All these functions are now split: the trigger comes from the PCI layer which calls to the bus generic code located in the other files. This is the beginning only. There are still a lot of PCI related code needs to be gathered. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: don't disable interrupts after the NIC has been resetEmmanuel Grumbach
It is superfluous to disable the interrupts after we reset the NIC. The only entity that could enable the interrupts after the NIC is reset is the driver. So remove this pointless action. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: Support flush queues for specified interfaceWey-Yi Guy
Flush command can target specified interface or all interfaces Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: add PAN to tx flushWey-Yi Guy
When issue tx flush, also consider PAN Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-18iwlagn: Remove un-necessary indirect callWey-Yi Guy
After driver split, no need to make indirect call to txfifo flush function Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-17Bluetooth: Fix locking in blacklist codeGustavo F. Padovan
There was no unlock call on the errors path Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-17b43: HT-PHY: implement switching analogRafał Miłecki
Turning it on is always done between reading PHY version and radio version, so it was easy to find it in MMIO dumps from ndiswrapper. Turning off is done by writing different values to the same registers. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17b43: HT-PHY: implement radio opsRafał Miłecki
Every PHY has some specific bit used for reading radio regs. Analyze of MMIO dumps from BCM4331 and ndiswrapper has shown it is 0x200 for HT. radio_read(0x037f) -> 0x0073 radio_write(0x017f) <- 0x0072 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17ath5k: annotate reg in ath5k_hw_nic_reset() as __iomemPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17ath5k: minor cleanupPavel Roskin
Move an extern variable declaration to a header file. Prefix all functions with "ath5k_". Make ath5k_intr() static. Remove unneeded forward declarations. Remove pointless "extern" in a function declaration. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17ath9k: typo fix in a commentPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17ath9k: use standard max(), remove A_MAX macroPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17ath9k: remove a redundant call to pcipowersaveMohammed Shafi Shajakhan
during suspend/resume ath9k_stop will always call ath_radio_disable which will inturn call ath9k_hw_configpcipowersave, so no need to call it explicitly in ath9k_stop Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17iwlegacy: fix up brokenness caused by cleanupDan Carpenter
Patch 7f1f9742514 "iwlegacy: refactor iwl4965_mac_channel_switch" reversed a test and also it changed a spin_lock_irq() to spin_lock(). I assume the spin_lock change was a mistake because the unlock was left as spin_unlock_irq(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17ath9k: Add debug messages to track PAPRD failuresMohammed Shafi Shajakhan
Add few debug messages for some of the possible scenarios where we can detect PAPRD failures. this will help us to be sure that we had really enabled PAPRD Cc: susinder@qca.qualcomm.com Cc: senthilb@qca.qualcomm.com Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17b43: add Kconfig option for compiling SSB driverRafał Miłecki
It is always "y" for now, b43 will not compile without CONFIG_SSB yet. This is just a first step of dropping SSB dependency. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17if_spi: Fix compilation warning - unused variableNikanth Karthikesan
if_spi: Fix compilation warning - unused variable 'spi' drivers/net/wireless/libertas/if_spi.c: In function ‘if_spi_init_card’: drivers/net/wireless/libertas/if_spi.c:1035: warning: unused variable ‘spi’ The variable is used only in a macro which uses the args only for DEBUG builds. Remove the 'spi' variable completely. Signed-off-by: Nikanth Karthikesan <nikanth@google.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17b43: HT-PHY: add place for writing HT PHY supportRafał Miłecki
This is totally broken plus we do not have specs for HT PHY yet. Just introduce place for writing driver if we discover anything. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17b43: define new PHYs and radio regs for cores >= 24Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17mac80211: add cancel_hw_scan() callbackEliad Peller
When suspending, __ieee80211_suspend() calls ieee80211_scan_cancel(), which will only cancel sw scan. In order to cancel hw scan, the low-level driver has to cancel it in the suspend() callback. however, this is too late, as a new scan_work will be enqueued (while the driver is going into suspend). Add a new cancel_hw_scan() callback, asking the driver to cancel an active hw scan, and call it in ieee80211_scan_cancel(). Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17drivers/ssb/driver_chipcommon_pmu.c: uninitilized warningConnor Hansen
warning message drivers/ssb/driver_chipcommon_pmu.c: In function ssb_pmu_resources_init drivers/ssb/driver_chipcommon_pmu.c:420:15: warning: updown_tab_size may be used uninitilized in this function. updown_tab_size and depend_tab_size may not be set in the bus->chip_id switch statement, so set to 0 by default to avoid using uninitialized stack space. Signed-off-by: Connor Hansen <cmdkhh@gmail.com> Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17mac80211: Start monitor work on restartPaul Stewart
Trigger connection monitor on resume from suspend. Since we have been sleeping, there is reason to suspect that we might not still be associated. The speed of detecting loss of {connection,authentication} is worth the cost of the small additional traffic at resume. Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-16Bluetooth: Use bit operations on conn_stateGustavo F. Padovan
Instead of setting bits manually we use set_bit, test_bit, etc. Also remove L2CAP_ prefix from macros. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16Bluetooth: use bit operation on conf_stateGustavo F. Padovan
Instead of making the bit operations manually, we now use set_bit, test_bit, etc. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16Bluetooth: Add blacklisting support for mgmt interfaceAntti Julku
Management interface commands for blocking and unblocking devices. Signed-off-by: Antti Julku <antti.julku@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16Bluetooth: Move blacklisting functions to hci_coreAntti Julku
Move blacklisting functions to hci_core.c, so that they can be used by both management interface and hci socket interface. Signed-off-by: Antti Julku <antti.julku@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-15Bluetooth: Fix L2CAP connection establishmentIlia Kolomisnky
In hci_conn_security ( which is used during L2CAP connection establishment ) test for HCI_CONN_ENCRYPT_PEND state also sets this state, which is bogus and leads to connection time-out on L2CAP sockets in certain situations (especially when using non-ssp devices ) Signed-off-by: Ilia Kolomisnky <iliak@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-14Bluetooth: Add key size checks for SMPVinicius Costa Gomes
This patch implements a check in smp cmd pairing request and pairing response to verify if encryption key maximum size is compatible in both slave and master when SMP Pairing is requested. Keys are also masked to the correct negotiated size. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-14Bluetooth: Add support for SMP timeoutVinicius Costa Gomes
This patch adds support for disconnecting the link when SMP procedure takes more than 30 seconds. SMP begins when either the Pairing Request command is sent or the Pairing Response is received, and it ends when the link is encrypted (or terminated). Vol 3, Part H Section 3.4. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-14Bluetooth: Fix accepting connect requests for defer_setupJohan Hedberg
When authentication completes we shouldn't blindly accept any pending L2CAP connect requests. If the socket has the defer_setup feature enabled it should still wait for user space acceptance of the connect request. The issue only happens for non-SSP connections since with SSP the L2CAP Connect request may not be sent for non-SDP PSMs before authentication has completed successfully. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: fix missing parameter for HCI_OP_DISCONNECTAnderson Lizardo
The "dc" variable is initialized but not passed to hci_send_cmd(). Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: Bruna Moreira <bruna.moreira@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add support for Pairing features exchangeVinicius Costa Gomes
This patch implements a simple version of the SMP Pairing Features exchange procedure (Vol. 3 Part H, Section 2.3.5.1). For now, everything that would cause a Pairing Method different of Just Works to be chosen is rejected. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add support for building pairing commandsVinicius Costa Gomes
Before we are able to do a proper exchange of pairing parameters, we need a unified way of building pairing requests and responses. For IO Capability we use the value that was set by userspace, using the management interface. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Update the security level when link is encryptedVinicius Costa Gomes
If the pending security level is greater than the current security level and the link is now encrypted, we should update the link security level. This is only useful for LE links, when the only event generated when SMP is sucessful in the Encrypt Change event. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-14 05:23:29 +0000