summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-07-22phy: Remove ARCH_KIRKWOOD dependencyAndrew Lunn
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. Depend on MACH_KIRKWOOD, which will be set when these SoCs are built as part of mach-mvebv. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: qcom: Add APQ8064 SATA PHY device tree bindingsSrinivas Kandagatla
This patch adds binding spec for Qualcomm AP8064 SATA PHY. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: qcom: Add driver for QCOM APQ8064 SATA PHYSrinivas Kandagatla
Add a PHY driver for uses with AHCI based SATA controller driver on the APQ8064 family of SoCs. This patch is a forward port from Qualcomm's v3.4 andriod kernel. Tested on IFC6410 board. CC: Sujit Reddy Thumma <sthumma@codeaurora.org> Tested-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: Kconfig: Update config for Exynos USB DRDSachin Kamat
USB DWC3 driver on Exynos platform does not work without its corresponding phy driver. Hence make the PHY driver depend on Exynos DWC3 driver and default it to yes to make things easier for the end user. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: Kconfig: Re-organize Exynos USB 2.0 PHY configsSachin Kamat
Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and USB gadget controller supported by the DWC2 gadget driver, make it depend on them and default to ARCH_EXYNOS as they are meant for Exynos platforms. Also, make the sub-drivers silent options enabling them based on the SoC platforms that they are meant to work with. This will make life easier for end users who do not have any way knowing the dependencies. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: core: Add phy-supply to DT binding documentationRoger Quadros
phy-supply is a phandle to the regulator that provides power to the PHY. This regulator is managed during the PHY power on/off sequence by the phy core driver. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: core: Support regulator supply for PHY powerRoger Quadros
Some PHYs can be powered by an external power regulator. e.g. USB_HS PHY on DRA7 SoC. Make the PHY core support a power regulator. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22drivers: phy: exynos-usb2: add support for Exynos 3250Marek Szyprowski
This patch adds support for Exynos3250 SoC to Exynos2USB PHY driver. Although Exynos3250 has only one device phy interface, the register layout and all operations that are required to get it enabled are almost same as on Exynos4x12. The only different is one more register (REFCLKSEL) which need to be set and lack of MODE SWITCH register. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: add hix5hd2-sata-phy driverJiancheng Xue
Add hix5hd2-sata-phy driver on Hisilicon hix5hd2 soc. Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22Documentation: Document Hisilicon hix5hd2 sata PHYJiancheng Xue
Add necessary binding documentation SATA PHY on Hisilicon hix5hd2 soc. Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: pipe3: insert delay to enumerate in GEN2 modeKishon Vijay Abraham I
8-bit delay value (0xF1) is required for GEN2 devices to be enumerated consistently. Added an API to be called from PHY drivers to set this delay value and called it from PIPE3 driver to set the delay value. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2014-07-22phy: phy-omap-pipe3: Add support for PCIe PHYKishon Vijay Abraham I
PCIe PHY uses an external pll instead of the internal pll used by SATA and USB3. So added support in pipe3 PHY to use external pll. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2014-07-22phy: phy-samsung-usb2: Change phy power on/power off sequenceKamil Debski
The Exynos4412 USB 2.0 PHY hardware differs from the description provided in the documentation. Some register bits have different function. This patch fixes the defines of register bits and changes the way how phys are powered on and off. Signed-off-by: Kamil Debski <k.debski@samsung.com> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: exynos5-usbdrd: Make local functions staticJingoo Han
Make local functions static, because these are used only in this file. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: sun4i-usb: Use PTR_ERR_OR_ZEROSachin Kamat
PTR_ERR_OR_ZERO simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: exynos-mipi-video: Use PTR_ERR_OR_ZEROSachin Kamat
PTR_ERR_OR_ZERO simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: exynos-dp-video: Use PTR_ERR_OR_ZEROSachin Kamat
PTR_ERR_OR_ZERO simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jingoo Han <jg1.han@samsung.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: miphy365x: Add MiPHY365x header file for DT x Driver definesLee Jones
This provides the shared header file which will be reference from both the MiPHY365x driver and its associated Device Tree node(s). Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-13Linux 3.16-rc5v3.16-rc5Linus Torvalds
2014-07-13Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "More bug fixes for ext4 -- most importantly, a fix for a bug introduced in 3.15 that can end up triggering a file system corruption error after a journal replay. It shouldn't lead to any actual data corruption, but it is scary and can force file systems to be remounted read-only, etc" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix potential null pointer dereference in ext4_free_inode ext4: fix a potential deadlock in __ext4_es_shrink() ext4: revert commit which was causing fs corruption after journal replays ext4: disable synchronous transaction batching if max_batch_time==0 ext4: clarify ext4_error message in ext4_mb_generate_buddy_error() ext4: clarify error count warning messages ext4: fix unjournalled bg descriptor while initializing inode bitmap
2014-07-13Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock driver fixes from Mike Turquette: "This batch of fixes is for a handful of clock drivers from Allwinner, Samsung, ST & TI. Most of them are of the "this hardware won't work without this fix" variety, including patches that fix platforms that did not boot under certain configurations. Other fixes are the result of changes to the clock core introduced in 3.15 that had subtle impacts on the clock drivers. There are no fixes to the clock framework core in this pull request" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: spear3xx: Set proper clock parent of uart1/2 clk: spear3xx: Use proper control register offset clk: qcom: HDMI source sel is 3 not 2 clk: sunxi: fix devm_ioremap_resource error detection code clk: s2mps11: Fix double free corruption during driver unbind clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled clk: exynos5420: Remove aclk66_peric from the clock tree description clk/exynos5250: fix bit number for tv sysmmu clock clk: s3c64xx: Hookup SPI clocks correctly clk: samsung: exynos4: Remove SRC_MASK_ISP gates clk: samsung: add more aliases for s3c24xx clk: samsung: fix several typos to fix boot on s3c2410 clk: ti: set CLK_SET_RATE_NO_REPARENT for ti,mux-clock clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled clk: ti: dra7: return error code in failure case clk: ti: apll: not allocating enough data
2014-07-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This week's arm-soc fixes: - Another set of OMAP fixes * Clock fixes * Restart handling * PHY regulators * SATA hwmod data for DRA7 + Some trivial fixes and removal of a bit of dead code - Exynos fixes * A bunch of clock fixes * Some SMP fixes * Exynos multi-core timer: register as clocksource and fix ftrace. + a few other minor fixes There's also a couple more patches, and at91 fix for USB caused by common clock conversion, and more MAINTAINERS entries for shmobile. We're definitely switching to only regression fixes from here on out, we've been a little less strict than usual up until now" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: at91: at91sam9x5: add clocks for usb device ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 ARM: dts: Add clock property for mfc_pd in exynos5420 clk: exynos5420: Add IDs for clocks used in PD mfc ARM: EXYNOS: Add support for clock handling in power domain ARM: OMAP2+: Remove non working OMAP HDMI audio initialization ARM: imx: fix shared gate clock ARM: dts: Update the parent for Audss clocks in Exynos5420 ARM: EXYNOS: Update secondary boot addr for secure mode ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA. ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio ARM: dts: am335x-evm: Enable the McASP FIFO for audio ARM: OMAP2+: Make GPMC skip disabled devices ARM: OMAP2+: create dsp device only on OMAP3 SoCs ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on ARM: DRA7/AM43XX: fix header definition for omap44xx_restart ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss ARM: DRA7: hwmod: Fixup SATA hwmod ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver ...
2014-07-13Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Another round of fixes for ARM: - a set of kprobes fixes from Jon Medhurst - fix the revision checking for the L2 cache which wasn't noticed to have been broken" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: l2c: fix revision checking ARM: kprobes: Fix test code compilation errors for ARMv4 targets ARM: kprobes: Disallow instructions with PC and register specified shift ARM: kprobes: Prevent known test failures stopping other tests running
2014-07-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fixes from Geert Uytterhoeven: "Summary: - Fix for a boot regression introduced in v3.16-rc1, - Fix for a build issue in -next" Christoph Hellwig questioned why mach_random_get_entropy should be exported to modules, and Geert explains that random_get_entropy() is called by at least the crypto layer and ends up using it on m68k. On most other architectures it just uses get_cycles() (which is typically inlined and doesn't need exporting), * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Export mach_random_get_entropy to modules m68k: Fix boot regression on machines with RAM at non-zero
2014-07-13Merge branch 'parisc-3.16-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "The major patch in here is one which fixes the fanotify_mark() syscall in the compat layer of the 64bit parisc kernel. It went unnoticed so long, because the calling syntax when using a 64bit parameter in a 32bit syscall is quite complex and even worse, it may be even different if you call syscall() or the glibc wrapper. This patch makes the kernel accept the calling convention when called by the glibc wrapper. The other two patches are trivial and remove unused headers, #includes and adds the serial ports of the fastest C8000 workstation to the parisc-kernel internal hardware database" * 'parisc-3.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: drop unused defines and header includes parisc: fix fanotify_mark() syscall on 32bit compat kernel parisc: add serial ports of C8000/1GHz machine to hardware database
2014-07-13clk: spear3xx: Set proper clock parent of uart1/2Thomas Gleixner
The uarts only work when the parent is ras_ahb_clk. The stale 3.5 based ST tree does this in the board file. Add it to the clk init function. Not pretty, but the mess there is amazing anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-13clk: spear3xx: Use proper control register offsetThomas Gleixner
The control register is at offset 0x10, not 0x0. This is wreckaged since commit 5df33a62c (SPEAr: Switch to common clock framework). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-13parisc: drop unused defines and header includesHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+
2014-07-13parisc: fix fanotify_mark() syscall on 32bit compat kernelHelge Deller
On parisc we can not use the existing compat implementation for fanotify_mark() because for the 64bit mask parameter the higher and lower 32bits are ordered differently than what the compat function expects from big endian architectures. Specifically: It finally turned out, that on hppa we end up with different assignments of parameters to kernel arguments depending on if we call the glibc wrapper function int fanotify_mark (int __fanotify_fd, unsigned int __flags, uint64_t __mask, int __dfd, const char *__pathname); or directly calling the syscall manually syscall(__NR_fanotify_mark, ...) Reason is, that the syscall() function is implemented as C-function and because we now have the sysno as first parameter in front of the other parameters the compiler will unexpectedly add an empty paramenter in front of the u64 value to ensure the correct calling alignment for 64bit values. This means, on hppa you can't simply use syscall() to call the kernel fanotify_mark() function directly, but you have to use the glibc function instead. This patch fixes the kernel in the hppa-arch specifc coding to adjust the parameters in a way as if userspace calls the glibc wrapper function fanotify_mark(). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+
2014-07-13parisc: add serial ports of C8000/1GHz machine to hardware databaseHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+
2014-07-12Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "We have two small fixes. First one from Daniel to handle 0-length packets for usb cppi dma. Second by Russell for imx-sdam cyclic residue reporting" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: Update imx-sdma cyclic handling to report residue dma: cppi41: handle 0-length packets
2014-07-12Merge tag 'samsung-fixes-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes-3 for 3.16" from Kukjin Kim: Samsung fixes-3 for v3.16 - update the parent for Auudss clock because kernel will be hang during late boot if the parent clock is disabled in bootloader. - enable clk handing in power domain because while power domain on/off, its regarding clock source will be reset and it causes a problem so need to handle it. - add mux clocks to be used by power domain for exynos5420-mfc during power domain on/off and property in device tree also. - register cpuidle only for exynos4210 and exynos5250 because a system failure will be happened on other exynos SoCs. * tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 ARM: dts: Add clock property for mfc_pd in exynos5420 clk: exynos5420: Add IDs for clocks used in PD mfc ARM: EXYNOS: Add support for clock handling in power domain ARM: dts: Update the parent for Audss clocks in Exynos5420 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-12Merge tag 'usb-3.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes, PHY driver fixes (they ended up in this tree for lack of somewhere else to put them), and some new USB device ids" * tag 'usb-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove phy: core: Fix error path in phy_create() drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE phy: omap-usb2: fix devm_ioremap_resource error detection code phy: sun4i: depend on RESET_CONTROLLER USB: serial: ftdi_sio: Add Infineon Triboard USB: ftdi_sio: Add extra PID. usb: option: Add ID for Telewell TW-LTE 4G v2 USB: cp210x: add support for Corsair usb dongle
2014-07-12Merge tag 'tty-3.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small serial fixes that resolve some reported problems that started in 3.15 with some serial drivers. And there's a new dt binding for a serial driver, which was all that was needed for the renesas serial driver" * tag 'tty-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sh-sci: Add device tree support for r8a7{778,740,3a4} and sh73a0 serial: imx: Fix build breakage serial: arc_uart: Use uart_circ_empty() for open-coded comparison serial: Test for no tx data on tx restart
2014-07-12Merge tag 'char-misc-3.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are two hyperv driver fixes, and one i8k driver fix for 3.16" * tag 'char-misc-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: i8k: Fix non-SMP operation Drivers: hv: util: Fix a bug in the KVP code Drivers: hv: vmbus: Fix a bug in the channel callback dispatch code
2014-07-12Merge tag 'staging-3.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO fixes from Greg KH: "Here are some IIO driver fixes for 3.16-rc5. Nothing major, just resolves some minor issues that have been reported" * tag 'staging-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends iio:tcs3472: Check for buffer enabled and locking iio: hid-sensor-prox: Fix return values iio: hid-sensor-gyro-3d: Fix return values iio: hid-sensor-als: Fix return values iio: hid-sensor-magn-3d: Fix return values iio: hid-sensor-accel-3d: Fix return values iio: hid-sensor-press: Fix return values
2014-07-12ext4: fix potential null pointer dereference in ext4_free_inodeNamjae Jeon
Fix potential null pointer dereferencing problem caused by e43bb4e612 ("ext4: decrement free clusters/inodes counters when block group declared bad") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2014-07-12ext4: fix a potential deadlock in __ext4_es_shrink()Theodore Ts'o
This fixes the following lockdep complaint: [ INFO: possible circular locking dependency detected ] 3.16.0-rc2-mm1+ #7 Tainted: G O ------------------------------------------------------- kworker/u24:0/4356 is trying to acquire lock: (&(&sbi->s_es_lru_lock)->rlock){+.+.-.}, at: [<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0 but task is already holding lock: (&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180 which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); *** DEADLOCK *** 6 locks held by kworker/u24:0/4356: #0: ("writeback"){.+.+.+}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560 #1: ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560 #2: (&type->s_umount_key#22){++++++}, at: [<ffffffff811a9c74>] grab_super_passive+0x44/0x90 #3: (jbd2_handle){+.+...}, at: [<ffffffff812979f9>] start_this_handle+0x189/0x5f0 #4: (&ei->i_data_sem){++++..}, at: [<ffffffff81247062>] ext4_map_blocks+0x132/0x550 #5: (&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180 stack backtrace: CPU: 0 PID: 4356 Comm: kworker/u24:0 Tainted: G O 3.16.0-rc2-mm1+ #7 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: writeback bdi_writeback_workfn (flush-253:0) ffffffff8213dce0 ffff880014b07538 ffffffff815df0bb 0000000000000007 ffffffff8213e040 ffff880014b07588 ffffffff815db3dd ffff880014b07568 ffff880014b07610 ffff88003b868930 ffff88003b868908 ffff88003b868930 Call Trace: [<ffffffff815df0bb>] dump_stack+0x4e/0x68 [<ffffffff815db3dd>] print_circular_bug+0x1fb/0x20c [<ffffffff810a7a3e>] __lock_acquire+0x163e/0x1d00 [<ffffffff815e89dc>] ? retint_restore_args+0xe/0xe [<ffffffff815ddc7b>] ? __slab_alloc+0x4a8/0x4ce [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff810a8707>] lock_acquire+0x87/0x120 [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff8128592d>] ? ext4_es_free_extent+0x5d/0x70 [<ffffffff815e6f09>] _raw_spin_lock+0x39/0x50 [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff8119760b>] ? kmem_cache_alloc+0x18b/0x1a0 [<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0 [<ffffffff812869b8>] ext4_es_insert_extent+0xc8/0x180 [<ffffffff812470f4>] ext4_map_blocks+0x1c4/0x550 [<ffffffff8124c4c4>] ext4_writepages+0x6d4/0xd00 ... Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reported-by: Minchan Kim <minchan@kernel.org> Cc: stable@vger.kernel.org Cc: Zheng Liu <gnehzuil.liu@gmail.com>
2014-07-12Documenation/laptops: rename and update hpfall.cPali Rohár
Dell kernel driver dell-smo8800 provides same freefall interface as hp_accel so program hpfall.c works also on Dell laptops. So rename it to freefall.c. Dell driver does not provide hp::hddprotect led so make sure that freefall.c works also if hp::hddprotect does not exist in sysfs. Additionally write info to syslog. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Cc: Sonal Santan <sonal.santan@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-12DocBook: fix various typosMasanari Iida
This patch fixed spelling typo in various template files within Documentation/Docbook. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-12DocBook: fix mtdnand typosMasanari Iida
This patch fixed spelling typo found in DocBook/mtdnand.tmpl. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-12scripts/kernel-doc: handle object-like macrosHoria Geanta
Object-like macros are different than function-like macros: https://gcc.gnu.org/onlinedocs/cpp/Object-like-Macros.html https://gcc.gnu.org/onlinedocs/cpp/Function-like-Macros.html They are not parsed correctly, generating invalid intermediate files (xmls) for cases like: #define BIT_MASK (0xFF << BIT_SHIFT) where "OxFF <<" is considered to be parameter type. When parsing, we can differentiate beween these two types of macros by checking whether there is at least one whitespace b/w "#define" and first opening parenthesis. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-12Documentation/Changes: clean up mcelog paragraphPaul Bolle
The paragraph on mcelog currently describes kernel v2.6.31. In that kernel the mce code (for i386, that is) was in transition. Ever since v2.6.32 the situation is much simpler (eg, mcelog is now needed to process events on almost all x86 machines, i386 and x86-64). Since this "document is designed to provide a list of the minimum levels of software necessary to run the 3.0 kernels" let's just describe that situation. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-12ARM: at91: at91sam9x5: add clocks for usb deviceBo Shen
Add clocks for usb device, or else switch to CCF, the gadget won't work. Reported-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-12Merge branch 'kprobes-test-fixes' of git://git.linaro.org/people/tixy/kernel ↵Russell King
into fixes
2014-07-11phy: omap-usb2: Balance pm_runtime_enable() on probe failure and removeRoger Quadros
If probe fails then we need to call pm_runtime_disable() to balance out the previous pm_runtime_enable() call. Else it will cause unbalanced pm_runtime_enable() call in the succeding probe call. This anomaly was observed when the call to devm_phy_create() failed with -EPROBE_DEFER. Balance out the pm_runtime_enable() call in .remove() as well. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11phy: core: Fix error path in phy_create()Roger Quadros
Prevent resources from being freed twice in case device_add() call fails within phy_create(). Also use ida_simple_remove() instead of ida_remove() as we had used ida_simple_get() to allocate the ida. Cc: 3.13+ <stable@vger.kernel.org> # 3.13+ Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLESjoerd Simons
Allow phy-exynos-usb2 to be autoloaded based on devicetree information. Tested on Odroid X2 with its USB subsystem build as modules. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11phy: omap-usb2: fix devm_ioremap_resource error detection codeHimangi Saraogi
devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // <smpl> @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11phy: sun4i: depend on RESET_CONTROLLERMaxime Ripard
The driver depend on the reset framework in a mandatory way. Make sure reset_control_get is defined by adding this dependency in Kconfig Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>