| Age | Commit message (Collapse) | Author |
|---|
|
timeout here maybe 0 if the event occured and a task with a higher
priority stole the cpu and we were sleeping longer than the timeout
value we specified.
In case of a real timeout I changed the error code to I2C_RETRY so we
retry the transfer.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Sodaville has three of them on a single IRQ. IRQF_DISABLED is removed
because it is a NOP allready and scheduled for removal.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
The Sodaville I2C controller is almost the same as found on PXA2xx. The
difference:
- the register are at a different offset
- no slave support
The PCI probe code adds three platform devices which are probed then by
the platform code.
The X86 part also adds dummy clock defines because we don't have HW
clock support.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
This patch moves the platform data definition from
arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so
it can be accessed from x86 the same way as on ARM.
This change should make no functional change to the PXA code. The move
is verified by building the following defconfigs:
cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig
imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig
raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig
pxa910_defconfig
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
This will prepare the driver to handle register layouts where certain
registers are not available at all.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits)
Input: tsc2005 - remove 'disable' sysfs attribute
Input: tsc2005 - add open/close
Input: tsc2005 - handle read errors from SPI layer
Input: tsc2005 - do not rearm timer in hardirq handler
Input: tsc2005 - don't use work for 'pen up' handling
Input: tsc2005 - do not use 0 in place of NULL
Input: tsc2005 - use true/false for boolean variables
Input: tsc2005 - hide selftest attribute if we can't reset
Input: tsc2005 - rework driver initialization code
Input: tsc2005 - set up bus type in input device
Input: tsc2005 - set up parent device
Input: tsc2005 - clear driver data after unbinding
Input: tsc2005 - add module description
Input: tsc2005 - remove driver banner message
Input: tsc2005 - remove incorrect module alias
Input: tsc2005 - convert to using dev_pm_ops
Input: tsc2005 - use spi_get/set_drvdata()
Input: introduce tsc2005 driver
Input: xen-kbdfront - move to drivers/input/misc
Input: xen-kbdfront - add grant reference for shared page
...
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: move NILFS_SUPER_MAGIC to linux/magic.h
nilfs2: get rid of nilfs_sb_info structure
nilfs2: use sb instance instead of nilfs_sb_info struct
nilfs2: get rid of sc_sbi back pointer
nilfs2: move log writer onto nilfs object
nilfs2: move next generation counter into nilfs object
nilfs2: move s_inode_lock and s_dirty_files into nilfs object
nilfs2: move parameters on nilfs_sb_info into nilfs object
nilfs2: move mount options to nilfs object
nilfs2: record used amount of each checkpoint in checkpoint list
nilfs2: optimize rec_len functions
nilfs2: append blocksize info to warnings during loading super blocks
nilfs2: add compat ioctl
nilfs2: implement FS_IOC_GETFLAGS/SETFLAGS/GETVERSION
nilfs2: tighten restrictions on inode flags
nilfs2: mark S_NOATIME on inodes only if NOATIME attribute is set
nilfs2: use common file attribute macros
nilfs2: add free entries count only if clear bit operation succeeded
nilfs2: decrement inodes count only if raw inode was successfully deleted
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)
mmc: dw_mmc: support mmc power control with regulator
mmc: dw_mmc: fix suspend/resume operation
mmc: dw_mmc: add quirks for unreliable card detect, and capabilities
mmc: tmio: fix address in kunmap_atomic() calls
mmc: core: reset card voltage after power off
mmc: core: export function mmc_do_release_host()
mmc: sdio: remember new card RCA when redetecting card
mmc: dw_mmc: Remove set-but-unused variable.
mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35
mmc: sdhci-esdhc: broken card detection is not a default quirk
mmc: sdhci-esdhc-imx: add write protect on custom GPIO on mx25/35
mmc: msm_sdcc: remove needless cache flush after dma_unmap_sg()
mmc: sh_mmcif: support aggressive clock gating
mmc: check if mmc cards < 2GB do sector addressing
mmc: core: comment on why sdio_reset is done at init time
mmc: dw_mmc: support DDR mode
mmc: via-sdmmc: Remove set-but-unused variable.
mmc: cb710: Return err value in cb710_wait_while_busy()
mmc: sdhci-pci: Remove set-but-unused variable.
mmc: mxs-mmc: add mmc host driver for i.MX23/28
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
USB: Move runtime PM callbacks to usb_device_pm_ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300:
MN10300: Clear ASB2364 peripheral interrupt masks before enabling interrupts
MN10300: Fix the ASB2364 gdbport UART register defs
MN10300: Fix ASB2364 FPGA register defs
MN10300: Select GENERIC_HARDIRQS_NO_DEPRECATED
MN10300: Select HAVE_GENERIC_HARDIRQS rather than GENERIC_HARDIRQS
MN10300: Convert ASB2364 FPGA irq_chip to new functions
MN10300: Convert ipi irq_chip to new functions
MN10300: Convert serial irq_chip to new functions
MN10300: Convert cpu irq_chips to new functions
MN10300: Remove unused mn10300_intc_* functions
MN10300: Remove stale irq_chip.end - V2
MN10300: Use clockevents_calc_mult_shift()
MN10300: Use clocksource_register_hz()
MN10300: Remove stale code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (32 commits)
Blackfin: ip0x: fix unused variable warning
Blackfin: punt unused HDMA masks
Blackfin: wire up new syscalls
Blackfin/ipipe: restore pipeline bits in irqflags
Blackfin/ipipe: fix deferred pipeline sync for the root stage
Blackfin/ipipe: upgrade to I-pipe mainline
Blackfin: cpufreq: fix typos
Blackfin: enable GENERIC_HARDIRQS_NO_DEPRECATED
Blackfin: SMP: convert to irq chip functions
Blackfin: use accessor functions in show_interrupts()
Blackfin: use proper wrapper functions for modifying irq status
Blackfin: convert gpio irq_chip to new functions
Blackfin: convert mac irq_chip to new functions
Blackfin: convert error irq_chip to new functions
Blackfin: convert internal irq_chip to new functions
Blackfin: convert core irq_chip to new functions
Blackfin: use proper wrappers for irq_desc
Blackfin: optimize startup code
Blackfin: SMP: work around anomaly 05000491
Blackfin: SMP: implement cpu_freq support
...
|
|
USB defines usb_device_type pointing to usb_device_pm_ops that
provides system-wide PM callbacks only and usb_bus_type pointing to
usb_bus_pm_ops that provides runtime PM callbacks only. However,
the USB runtime PM callbacks may be defined in usb_device_pm_ops
which makes it possible to drop usb_bus_pm_ops and will allow us
to consolidate the handling of subsystems by the PM core code.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: label: remove #include of ACPI header to avoid warnings
PCI: label: Fix compilation error when CONFIG_ACPI is unset
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.
PCI: introduce reset_resource()
PCI: data structure agnostic free list function
PCI: refactor io size calculation code
PCI: do not create quirk I/O regions below PCIBIOS_MIN_IO for ICH
PCI hotplug: acpiphp: set current_state to D0 in register_slot
PCI: Export ACPI _DSM provided firmware instance number and string name to sysfs
PCI: add more checking to ICH region quirks
PCI: aer-inject: Override PCIe AER Mask Registers
PCI: fix tlan build when CONFIG_PCI is not enabled
PCI: remove quirk for pre-production systems
PCI: Avoid potential NULL pointer dereference in pci_scan_bridge
PCI/lpc: irq and pci_ids patch for Intel DH89xxCC DeviceIDs
PCI: sysfs: Fix failure path for addition of "vpd" attribute
|
|
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
spi/dw_spi: move dw_spi.h into drivers/spi
spi/dw_spi: Fix missing header
gpio/langwell: Clear edge bit before handling
gpio/langwell: Simplify demux loop
gpio/langwell: Convert irq name space
gpio/langwell: Fix broken irq_eoi change.
gpio; Make Intel chipset gpio drivers depend on x86
gpio/cs5535-gpio: Fix section mismatch
spi/rtc-{ds1390,ds3234,m41t94}: Use spi_get_drvdata() for SPI devices
spi/davinci: Support DMA transfers larger than 65535 words
spi/davinci: Use correct length parameter to dma_map_single calls
gpio: Use __devexit at necessary places
gpio: add MODULE_DEVICE_TABLE to pch_gpio and ml_ioh_gpio
gpio/mcp23s08: support mcp23s17 variant
of_mmc_spi: add card detect irq support
spi/omap_mcspi: catch xfers of non-multiple SPI word size
spi/omap_mcspi: Off-by-one error in finding the right divisor
gpio/pca953x: Fix wrong pointer type
spi/pl022: rid dangling labels
spi: add support for SuperH SPI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: use alloc_workqueue function
dlm: increase default hash table sizes
dlm: record full callback state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
fs: call security_d_instantiate in d_obtain_alias V2
lose 'mounting_here' argument in ->d_manage()
don't pass 'mounting_here' flag to follow_down()
change the locking order for namespace_sem
fix deadlock in pivot_root()
vfs: split off vfsmount-related parts of vfs_kern_mount()
Some fixes for pstore
kill simple_set_mnt()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bcopeland/omfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bcopeland/omfs:
omfs: make readdir stop when filldir says so
omfs: merge unlink() and rmdir(), close leak in rename()
omfs: stop playing silly buggers with omfs_unlink() in ->rename()
omfs: rename() needs to mark old_inode dirty after ctime update
|
|
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (25 commits)
UBIFS: clean-up commentaries
UBIFS: save 128KiB or more RAM
UBIFS: allocate orphans scan buffer on demand
UBIFS: allocate lpt dump buffer on demand
UBIFS: allocate ltab checking buffer on demand
UBIFS: allocate scanning buffer on demand
UBIFS: allocate dump buffer on demand
UBIFS: do not check data crc by default
UBIFS: simplify UBIFS Kconfig menu
UBIFS: print max. index node size
UBIFS: handle allocation failures in UBIFS write path
UBIFS: use max_write_size during recovery
UBIFS: use max_write_size for write-buffers
UBIFS: introduce write-buffer size field
UBI: incorporate LEB offset information
UBIFS: incorporate maximum write size
UBI: provide LEB offset information
UBI: incorporate maximum write size
UBIFS: fix LEB number in printk
UBIFS: restrict world-writable debugfs files
...
|
|
* 'linux-next' of git://git.infradead.org/ubi-2.6:
UBI: make tests modes dynamic
UBI: make self-checks dynamic
UBI: make debugging messages dynamic
UBI: remove UBI_IO_DEBUG macro
UBI: kill debugging buffer
UBI: allocate erase checking buffer on demand
UBI: allocate write checking buffer on demand
UBI: always re-read in case of read failures
UBI: cleanup comments about corrupted PEBs
UBI: add slab cache for ubi_scan_leb objects
UBI: use raw mtd read function in debugging code
UBI: try to reveal buggy MTD drivers
UBI: add a commentary about allocating VID header buffer on stack
UBI: cleanup LEB start calculations
UBI: fix NOR erase preparation quirk
|
|
Add an entry for serial maintainers.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (308 commits)
ALSA: sound/pci/asihpi: check adapter index in hpi_ioctl
ALSA: aloop - Fix possible IRQ lock inversion
ALSA: sound/core: merge list_del()/list_add_tail() to list_move_tail()
ALSA: ctxfi - use list_move() instead of list_del()/list_add() combination
ALSA: firewire - msleep needs delay.h
ALSA: firewire-lib, firewire-speakers: handle packet queueing errors
ALSA: firewire-lib: allocate DMA buffer separately
ALSA: firewire-lib: use no-info SYT for packets without SYT sample
ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver
ALSA: hda - Remove an unused variable in patch_realtek.c
ALSA: hda - pin-adc-mux-dmic auto-configuration of 92HD8X codecs
ALSA: hda - fix digital mic selection in mixer on 92HD8X codecs
ALSA: hda - Move default input-src selection to init part
ALSA: hda - Initialize special cases for input src in init phase
ALSA: ctxfi - Clear input settings before initialization
ALSA: ctxfi - Fix SPDIF status retrieval
ALSA: ctxfi - Fix incorrect SPDIF status bit mask
ALSA: ctxfi - Fix microphone boost codes/comments
ALSA: atiixp - Fix wrong time-out checks during ac-link reset
ALSA: intel8x0m: append 'm' to "r_intel8x0"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Flush TLB if PGD entry is changed in i386 PAE mode
x86, dumpstack: Correct stack dump info when frame pointer is available
x86: Clean up csum-copy_64.S a bit
x86: Fix common misspellings
x86: Fix misspelling and align params
x86: Use PentiumPro-optimized partial_csum() on VIA C7
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Fix incorrect unlock in __setup_irq()
cris: Use generic show_interrupts()
genirq: show_interrupts: Check desc->name before printing it blindly
cris: Use accessor functions to set IRQ_PER_CPU flag
cris: Fix irq conversion fallout
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched, kernel-doc: Fix runqueue_is_locked() description
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
trace, filters: Initialize the match variable in process_ops() properly
trace, documentation: Fix branch profiling location in debugfs
oprofile, s390: Cleanups
oprofile, s390: Remove hwsampler_files.c and merge it into init.c
perf: Fix tear-down of inherited group events
perf: Reorder & optimize perf_event_context to remove alignment padding on 64 bit builds
perf: Handle stopped state with tracepoints
perf: Fix the software events state check
perf, powerpc: Handle events that raise an exception without overflowing
perf, x86: Use INTEL_*_CONSTRAINT() for all PEBS event constraints
perf, x86: Clean up SandyBridge PEBS events
perf lock: Fix sorting by wait_min
perf tools: Version incorrect with some versions of grep
perf evlist: New command to list the names of events present in a perf.data file
perf script: Add support for H/W and S/W events
perf script: Add support for dumping symbols
perf script: Support custom field selection for output
perf script: Move printing of 'common' data from print_event and rename
perf tracing: Remove print_graph_cpu and print_graph_proc from trace-event-parse
perf script: Change process_event prototype
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
Update cpuset info & webiste for cgroups
dcdbas: force SMI to happen when expected
arch/arm/Kconfig: remove one to many l's in the word.
asm-generic/user.h: Fix spelling in comment
drm: fix printk typo 'sracth'
Remove one to many n's in a word
Documentation/filesystems/romfs.txt: fixing link to genromfs
drivers:scsi Change printk typo initate -> initiate
serial, pch uart: Remove duplicate inclusion of linux/pci.h header
fs/eventpoll.c: fix spelling
mm: Fix out-of-date comments which refers non-existent functions
drm: Fix printk typo 'failled'
coh901318.c: Change initate to initiate.
mbox-db5500.c Change initate to initiate.
edac: correct i82975x error-info reported
edac: correct i82975x mci initialisation
edac: correct commented info
fs: update comments to point correct document
target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
...
Trivial conflict in fs/eventpoll.c (spelling vs addition)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (48 commits)
HID: add support for Logitech Driving Force Pro wheel
HID: hid-ortek: remove spurious reference
HID: add support for Ortek PKB-1700
HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor'
HID: hid-ntrig: init settle and mode check
HID: merge hid-egalax into hid-multitouch
HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing
HID: ntrig remove if and drop an indent
HID: ACRUX - activate the device immediately after binding
HID: ntrig: apply NO_INIT_REPORTS quirk
HID: hid-magicmouse: Correct touch orientation direction
HID: ntrig don't dereference unclaimed hidinput
HID: Do not create input devices for feature reports
HID: bt hidp: send Output reports using SET_REPORT on the Control channel
HID: hid-sony.c: Fix sending Output reports to the Sixaxis
HID: add support for Keytouch IEC 60945
HID: Add HID Report Descriptor to sysfs
HID: add IRTOUCH infrared USB to hid_have_special_driver
HID: kernel oops in out_cleanup in function hidinput_connect
HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE)
...
|
|
Clear the interrupt mask registers of ASB2364 peripherals before enabling
interrupts so that any peripherals that weren't dealt with by the bootloader
after a reboot (if there was one) won't cause an interrupt storm when
interrupts are first enabled before the drivers are initialised.
Also, attempt to reset the peripherals attached to the FPGA.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix the ASB2364 gdbport UART register definitions. These registers are
actually 2 bytes apart, not 4 (which the ASB2303 and ASB2305 are).
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix the definition of the ASB2364 FPGA IRQ detect registers. They accidentally
got defined to be the same as the mask registers when the patches were being
ported to the upstream kernel.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
All chips converted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Select HAVE_GENERIC_HARDIRQS rather than GENERIC_HARDIRQS in MN10300's main
Kconfig file to avoid this warning:
warning: (MN10300) selects GENERIC_HARDIRQS which has unmet direct dependencies (HAVE_GENERIC_HARDIRQS)
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
No users.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
irq_chip.end is obsolete with the removal of __do_IRQ().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Use clockevents_calc_mult_shift() instead of the homebrewn function in
mn10300/kernel/time.c.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
clocksource_register_hz() calculates the shift/mult pair for the
clocksource. Remove the mn10300 duplicate implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
mn10300 implements clocksource and clockevents and selects them
unconditionally in Kconfig. Remove the stale code which seems to be a
leftover of the conversion. Cleanup the configuration switches as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
include/linux/dw_spi.h only includes driver internal data. It doesn't
expose a platform_data configuration structure or similar (at least
nothing in-tree). This patch moves the header into drivers/spi so
that the scope is limited to only the dw_spi_*.c driver files
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Feng Tang <feng.tang@intel.com>
Cc: spi-devel-general@lists.sourceforge.net
|
|
Currently, build on PPC dies with:
In file included from drivers/spi/dw_spi_mmio.c:16:
include/linux/spi/dw_spi.h:147: error: field ‘tx_sgl’ has incomplete type
include/linux/spi/dw_spi.h:149: error: field ‘rx_sgl’ has incomplete type
Add linux/scatterlist.h include to dw_spi.h, because we need to know
the contents of the structure.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
While trying to track down some NFS problems with BTRFS, I kept noticing I was
getting -EACCESS for no apparent reason. Eric Paris and printk() helped me
figure out that it was SELinux that was giving me grief, with the following
denial
type=AVC msg=audit(1290013638.413:95): avc: denied { 0x800000 } for pid=1772
comm="nfsd" name="" dev=sda1 ino=256 scontext=system_u:system_r:kernel_t:s0
tcontext=system_u:object_r:unlabeled_t:s0 tclass=file
Turns out this is because in d_obtain_alias if we can't find an alias we create
one and do all the normal instantiation stuff, but we don't do the
security_d_instantiate.
Usually we are protected from getting a hashed dentry that hasn't yet run
security_d_instantiate() by the parent's i_mutex, but obviously this isn't an
option there, so in order to deal with the case that a second thread comes in
and finds our new dentry before we get to run security_d_instantiate(), we go
ahead and call it if we find a dentry already. Eric assures me that this is ok
as the code checks to see if the dentry has been initialized already so calling
security_d_instantiate() against the same dentry multiple times is ok. With
this patch I'm no longer getting errant -EACCESS values.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
it's always false...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Make sure the 'match' variable always has a value.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (62 commits)
powerpc/85xx: Fix signedness bug in cache-sram
powerpc/fsl: 85xx: document cache sram bindings
powerpc/fsl: define binding for fsl mpic interrupt controllers
powerpc/fsl_msi: Handle msi-available-ranges better
drivers/serial/ucc_uart.c: Add of_node_put to avoid memory leak
powerpc/85xx: Fix SPE float to integer conversion failure
powerpc/85xx: Update sata controller compatible for p1022ds board
ATA: Add FSL sata v2 controller support
powerpc/mpc8xxx_gpio: simplify searching for 'fsl, qoriq-gpio' compatiable
powerpc/8xx: remove obsolete mgsuvd board
powerpc/82xx: rename and update mgcoge board support
powerpc/83xx: rename and update kmeter1
powerpc/85xx: Workaroudn e500 CPU erratum A005
powerpc/fsl_pci: Add support for FSL PCIe controllers v2.x
powerpc/85xx: Fix writing to spin table 'cpu-release-addr' on ppc64e
powerpc/pseries: Disable MSI using new interface if possible
powerpc: Enable GENERIC_HARDIRQS_NO_DEPRECATED.
powerpc: core irq_data conversion.
powerpc: sysdev/xilinx_intc irq_data conversion.
powerpc: sysdev/uic irq_data conversion.
...
Fix up conflicts in arch/powerpc/sysdev/fsl_msi.c (due to getting rid of
of_platform_driver in arch/powerpc)
|
|
it's always false now
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Have it nested inside ->i_mutex. Instead of using follow_down()
under namespace_sem, followed by grabbing i_mutex and checking that
mountpoint to be is not dead, do the following:
grab i_mutex
check that it's not dead
grab namespace_sem
see if anything is mounted there
if not, we've won
otherwise
drop locks
put_path on what we had
replace with what's mounted
retry everything with new mountpoint to be
New helper (lock_mount()) does that. do_add_mount(), do_move_mount(),
do_loopback() and pivot_root() switched to it; in case of the last
two that eliminates a race we used to have - original code didn't
do follow_down().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Don't hold vfsmount_lock over the loop traversing ->mnt_parent;
do check_mnt(new.mnt) under namespace_sem instead; combined with
namespace_sem held over all that code it'll guarantee the stability
of ->mnt_parent chain all the way to the root.
Doing check_mnt() outside of namespace_sem in case of pivot_root()
is wrong anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
