summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-02-01V4L/DVB (10411): s5h1409: Perform s5h1409 soft reset after tuningDevin Heitmueller
Just like with the s5h1411, the s5h1409 needs a soft-reset in order for it to know that the tuner has been told to change frequencies. This change changes the behavior from "random tuning times between 500ms to complete tuning lock failures" to "tuning lock consistently within 700ms". Thanks to Robert Krakora <rob.krakora@messagenetsystems.com> for doing initial testing of the patch on the KWorld 330U. Thanks to Andy Walls <awalls@radix.net> for doing testing of the patch on the HVR-1600. Thanks to Michael Krufky <mkrufky@linuxtv.org> for doing additional testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-01V4L/DVB (10403): saa7134-alsa: saa7130 doesn't support digital audioMauro Carvalho Chehab
According with saa7130 public datasheet, saa7130 doesn't support digital audio. This is also confirmed by experimental tests. So, it doesn't make sense to let saa7134-alsa register for those chipsets. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-01irq, x86: fix lock status with numa_migrate_irq_descYinghai Lu
Eric Paris reported: > I have an hp dl785g5 which is unable to successfully run > 2.6.29-0.66.rc3.fc11.x86_64 or 2.6.29-rc2-next-20090126. During bootup > (early in userspace daemons starting) I get the below BUG, which quickly > renders the machine dead. I assume it is because sparse_irq_lock never > gets released when the BUG kills that task. Adjust lock sequence when migrating a descriptor with CONFIG_NUMA_MIGRATE_IRQ_DESC enabled. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-01x86: add cache descriptors for Intel Core i7Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-01sched_rt: don't use first_cpu on cpumask created with cpumask_andRusty Russell
cpumask_and() only initializes nr_cpu_ids bits, so the (deprecated) first_cpu() might find one of those uninitialized bits if nr_cpu_ids is less than NR_CPUS (as it can be for CONFIG_CPUMASK_OFFSTACK). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-01sched: fix buddie group latencyPeter Zijlstra
Similar to the previous patch, by not clearing buddies we can select entities past their run quota, which can increase latency. This means we have to clear group buddies as well. Do not use the group clear for pick_next_task(), otherwise that'll get O(n^2). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-01sched: clear buddies more aggressivelyMike Galbraith
It was noticed that a task could get re-elected past its run quota due to buddy affinities. This could increase latency a little. Cure it by more aggresively clearing buddy state. We do so in two situations: - when we force preempt - when we select a buddy to run Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-01sched: symmetric sync vs avg_overlapPeter Zijlstra
Reinstate the weakening of the sync hint if set. This yields a more symmetric usage of avg_overlap. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-01sched: fix sync wakeupsPeter Zijlstra
Pawel Dziekonski reported that the openssl benchmark and his quantum chemistry application both show slowdowns due to the scheduler under-parallelizing execution. The reason are pipe wakeups still doing 'sync' wakeups which overrides the normal buddy wakeup logic - even if waker and wakee are loosely coupled. Fix an inversion of logic in the buddy wakeup code. Reported-by: Pawel Dziekonski <dzieko@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31Merge branch 'header-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'header-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (90 commits) headers_check fix: x86, swab.h headers_check fix: x86, sigcontext32.h headers_check fix: x86, sigcontext.h headers_check fix: x86, ptrace-abi.h headers_check fix: x86, mtrr.h headers_check fix: x86, mce.h headers_check fix: x86, kvm.h headers_check fix: x86, e820.h headers_check fix: linux/rtnetlink.h headers_check fix: linux/nubus.h headers_check fix: video/uvesafb.h headers_check fix: video/sisfb.h headers_check fix: sound/hdsp.h headers_check fix: mtd/inftl-user.h headers_check fix: linux/virtio_net.h headers_check fix: linux/virtio_console.h headers_check fix: linux/virtio_blk.h headers_check fix: linux/videodev.h headers_check fix: linux/video_encoder.h headers_check fix: linux/video_decoder.h ...
2009-01-31Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: generic-ipi: use per cpu data for single cpu ipi calls cpumask: convert lib/smp_processor_id to new cpumask ops signals, debug: fix BUG: using smp_processor_id() in preemptible code in print_fatal_signal()
2009-01-31Merge branch 'irq-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: export __set_irq_handler() and handle_level_irq()
2009-01-31Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimer: prevent negative expiry value after clock_was_set() hrtimers: allow the hot-unplugging of all cpus hrtimers: increase clock min delta threshold while interrupt hanging
2009-01-31Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, ds, bts: cleanup/fix DS configuration ring-buffer: reset timestamps when ring buffer is reset trace: set max latency variable to zero on default trace: stop all recording to ring buffer on ftrace_dump trace: print ftrace_dump at KERN_EMERG log level ring_buffer: reset write when reserve buffer fail tracing/function-graph-tracer: fix a regression while suspend to disk ring-buffer: fix alignment problem
2009-01-31Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 setup: fix asm constraints in vesa_store_edid xen: make sysfs files behave as their names suggest x86: tone down mtrr_trim_uncached_memory() warning x86: correct the CPUID pattern for MSR_IA32_MISC_ENABLE availability
2009-01-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: leds: Fix bounds checking of wm8350->pmic.led regulator: move bq24022 init back to module_init instead of subsys_initcall
2009-01-31Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (27 commits) MIPS: Alchemy: time.c build fix MIPS: RB532: Export rb532_gpio_set_func() MIPS: RB532: Update headers MIPS: RB532: Simplify dev3 init MIPS: RB532: Remove {get,set}_434_reg() MIPS: RB532: Move dev3 init code to devices.c MIPS: RB532: Fix set_latch_u5() MIPS: RB532: Fix init of rb532_dev3_ctl_res MIPS: RB532: Use driver_data instead of platform_data MIPS: RB532: Detect uart type, add platform device MIPS: RB532: remove useless CF GPIO initialisation MIPS: RB532: Auto disable GPIO alternate function MIPS: RB532: Add set_type() function to IRQ struct. MIPS: RC32434: Define io_map_base for PCI controller MIPS: RB532: Fix bit swapping in rb532_set_bit() MIPS: Use hardware watchpoints on all R1 and R2 CPUs. MIPS: Read watch registers with interrupts disabled. MIPS: Fix a typo in watchpoint register structure. MIPS: TXx9: Add support for TX4939 internal RTC MIPS: R2: Fix broken installation of cache error handler. ...
2009-01-31Fix memory corruption in console selectionMikulas Patocka
Fix an off-by-two memory error in console selection. The loop below goes from sel_start to sel_end (inclusive), so it writes one more character. This one more character was added to the allocated size (+1), but it was not multiplied by an UTF-8 multiplier. This patch fixes a memory corruption when UTF-8 console is used and the user selects a few characters, all of them 3-byte in UTF-8 (for example a frame line). When memory redzones are enabled, a redzone corruption is reported. When they are not enabled, trashing of random memory occurs. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: igb: fix link reporting when using sgmii igb: prevent skb_over panic w/ mtu smaller than 1K igb: Fix DCA errors and do not use context index for 82576 ipv6: compile fix for ip6mr.c packet: Avoid lock_sock in mmap handler sfc: Replace stats_enabled flag with a disable count sfc: SFX7101/SFT9001: Fix AN advertisements sfc: SFT9001: Always enable XNP exchange on SFT9001 rev B sfc: Update board info for hardware monitor on SFN4111T-R5 and later sfc: Test for PHYXS faults whenever we cannot test link state bits sfc: Reinitialise the PHY completely in case of a PHY or NIC reset sfc: Fix post-reset MAC selection sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1 sfc: SFT9001: Fix speed reporting in 1G PHY loopback sfc: SFX7101: Remove workaround for bad link training sfc: SFT9001: Enable robust link training sky2: fix hard hang with netconsoling and iface going up
2009-01-31Stop playing silly games with the VM_ACCOUNT flagLinus Torvalds
The mmap_region() code would temporarily set the VM_ACCOUNT flag for anonymous shared mappings just to inform shmem_zero_setup() that it should enable accounting for the resulting shm object. It would then clear the flag after calling ->mmap (for the /dev/zero case) or doing shmem_zero_setup() (for the MAP_ANON case). This just resulted in vma merge issues, but also made for just unnecessary confusion. Use the already-existing VM_NORESERVE flag for this instead, and let shmem_{zero|file}_setup() just figure it out from that. This also happens to make it obvious that the new DRI2 GEM layer uses a non-reserving backing store for its object allocation - which is quite possibly not intentional. But since I didn't want to change semantics in this patch, I left it alone, and just updated the caller to use the new flag semantics. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-31x86/Voyager: make it build and bootJames Bottomley
[ mingo@elte.hu: these fixes are a subset of changes cherry-picked from: git://git.kernel.org:/pub/scm/linux/kernel/git/jejb/voyager-2.6.git They fix various problems that recent x86 changes caused in the Voyager subarchitecture: both APIC changes and cpumask changes and certain cleanups caused subarch assumptions to break. Most of these changes are obsolete as the subarch code has been removed from the x86 development tree - but we merge them upstream to make Voyager build and boot. ] Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31igb: fix link reporting when using sgmiiAlexander Duyck
When using sgmii the link was not being properly passed up to the driver from the underlying link management functions. This change corrects it so that get_link_status is cleared when a link has been found. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-31igb: prevent skb_over panic w/ mtu smaller than 1KAlexander Duyck
A panic has been observed with frame sizes smaller than 1K. This has been root caused to the hardware spanning larger frames across multiple buffers and then reporting the original frame size in the first descriptor. To prevent this we can enable set the LPE bit which in turn will restrict packet sizes to those set in the RLPML register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-31igb: Fix DCA errors and do not use context index for 82576Alexander Duyck
82576 was being incorrectly flagged as needing a context index. It does not as each ring has it's own table of 2 contexts. Driver was registering after registering the driver instead of the other way around. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-31ipv6: compile fix for ip6mr.cDave Jones
net/ipv6/ip6mr.c: In function 'pim6_rcv': net/ipv6/ip6mr.c:368: error: implicit declaration of function 'csum_ipv6_magic' Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-31x86, vm86: clean up invalid_vm86_irq()Ingo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86, irq: describe NR_IRQ sizing details, clean upIngo Molnar
Impact: cleanup Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86, irq_vectors.h: remove needless includesIngo Molnar
Reduce include file dependencies a bit - remove the two headers that are included in irq_vectors.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86, irq: add IRQ layout commentsIngo Molnar
Describe the layout of x86 trap/exception/IRQ vectors and clean up indentation and other small details. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86, irqs, voyager: remove Voyager quirkIngo Molnar
Remove a Voyager complication from the generic irq_vectors.h header. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86, voyager: move Voyager-specific defines to voyager.hIngo Molnar
They dont belong into the generic headers. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86, apic: clean up spurious vector sanity checkIngo Molnar
Move the spurious vector sanity check to the place where it's defined - out of a .c file. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86, apic: unify the APIC vector enumerationIngo Molnar
Most of the vector layout on 32-bit and 64-bit is identical now, so eliminate the duplicated enumeration of the vectors. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86: update copyrightsIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86, apic: clean up header sectionIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86, irq: add LOCAL_PERF_VECTORIngo Molnar
Add a slot for the performance monitoring interrupt. Not yet used by any subsystem - but the hardware has it. (This eases integration with performance monitoring code.) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30x86 setup: fix asm constraints in vesa_store_edidAndreas Schwab
Impact: fix potential miscompile (currently believed non-manifest) As the comment explains, the VBE DDC call can clobber any register. Tell the compiler about that fact. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30x86, apic, 32-bit: add self-IPI methodsIngo Molnar
Impact: fix rare crash on 32-bit The 32-bit APIC drivers had their send_IPI_self vectors set to NULL, but ioapic_retrigger_irq() depends on it being always set. Fix it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30packet: Avoid lock_sock in mmap handlerHerbert Xu
As the mmap handler gets called under mmap_sem, and we may grab mmap_sem elsewhere under the socket lock to access user data, we should avoid grabbing the socket lock in the mmap handler. Since the only thing we care about in the mmap handler is for pg_vec* to be invariant, i.e., to exclude packet_set_ring, we can achieve this by simply using a new mutex. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Martin MOKREJŠ <mmokrejs@ribosome.natur.cuni.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: Replace stats_enabled flag with a disable countBen Hutchings
Currently we use a spin-lock to serialise statistics fetches and also to inhibit them for short periods of time, plus a flag to enable/disable statistics fetches for longer periods of time, during online reset. This was apparently insufficient to deal with the several reasons for stats being disabled. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFX7101/SFT9001: Fix AN advertisementsBen Hutchings
All 10Xpress PHYs require autonegotiation all the time; enforce this in the set_settings() method and do not treat it as a workaround. Remove claimed support for 100M HD mode since it is not supported by current firmware. Do not set speed override bits when AN is enabled, and do not use register 1.49192 for AN configuration as it can override what we set elsewhere. Always set the AN selector bits to 1 (802.3). Fix confusion between Next Page and Extended Next Page. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFT9001: Always enable XNP exchange on SFT9001 rev BBen Hutchings
This workaround is not specific to rev A. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: Update board info for hardware monitor on SFN4111T-R5 and laterBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: Test for PHYXS faults whenever we cannot test link state bitsSteve Hodgson
Depending on the loopback mode, there may be no pertinent link state bits. In this case we test the PHYXS RX fault bit instead. Make sure to do this in all cases where there are no link state bits. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: Reinitialise the PHY completely in case of a PHY or NIC resetSteve Hodgson
In particular, set pause advertising bits properly. A PHY reset is not necessary to recover from the register self-test, so use a "invisible" reset there instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: Fix post-reset MAC selectionSteve Hodgson
Modify falcon_switch_mac() to always set NIC_STAT_REG, even if the the MAC is the same as it was before. This ensures that the value is correct after an online reset. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1Ben Hutchings
Change sfn4111t_reset() to change only GPIO output enables so that it doesn't break subsequent I2C operations. Update comments to explain exactly what we're doing. Add a short sleep to make sure the FLASH_CFG_1 value is latched before any subsequent I2C operations. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFT9001: Fix speed reporting in 1G PHY loopbackSteve Hodgson
Instead of disabling AN in loopback, just prevent restarting AN and override the speed in sft9001_get_settings(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFX7101: Remove workaround for bad link trainingSteve Hodgson
Early versions of the SFX7101 firmware could complete link training in a state where it would not adequately cancel noise (Solarflare bug 10750). We previously worked around this by resetting the PHY after seeing many Ethernet CRC errors. This workaround is unsafe since it takes no account of the interval between errors; it also appears to be unnecessary with production firmware. Therefore remove it. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30sfc: SFT9001: Enable robust link trainingSteve Hodgson
Enable a firmware option that appears to be necessary for reliable operation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-01 04:41:05 +0000