summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-06-01ASoC: add missing clk_put to nuc900-ac97Julia Lawall
This goto is after the call to clk_get, so it should go to the label that includes a call to clk_put. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-01ASoC: Support edge triggered IRQs for WM8915Mark Brown
Really this should be something the IRQ core can cope with for us but since it doesn't currently do so (at least for threaded interrupts like this) do so in the driver. This allows us to run with interrupt controllers that only support edge triggered interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-01ASoC: Staticize ak4641_daiMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-30Merge branch 'for-2.6.40' into for-2.6.41Mark Brown
2011-05-29ASoC: Remove redundant freq assignment for max98095->sysclk/max98088->sysclkAxel Lin
Current implementation set max98095->sysclk/max98088->sysclk to freq twice. Set it once is enough, this patch removes the first assignment in case we may set invalid clock frequency to max98095->sysclk/max98088->sysclk. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Hsiang <peter.hsiang@maxim-ic.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-27ASoC: Fix wm_hubs input PGA ZC bitsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-27ASoC: Tegra: Enable Kaen HP_MUTE at bootStephen Warren
We want the default state of the HP_MUTE signal to be asserted, so that the headphones are muted before the first audio playback. Without this, the headphones are left unmuted until shortly after the first audio playback completes. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-27ASoC: Use explicit endianness conversion in snd_soc_16_8_write()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-27ASoC: Use cpu_to_be16() in 8x16 writeMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-27ASoC: Convert 7x9 write to use cpu_to_be16()Mark Brown
Run the data through cpu_to_be16() so it's at least clear what we're up to. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-27ASoC: Fix dapm_is_shared_kcontrol so everything isn't sharedStephen Warren
Commit af46800 ("ASoC: Implement mux control sharing") introduced function dapm_is_shared_kcontrol. When this function returns true, the naming of DAPM controls is derived from the kcontrol_new. Otherwise, the name comes from the widget (and possibly a widget's naming prefix). A bug in the implementation of dapm_is_shared_kcontrol made it return 1 in all cases. Hence, that commit caused a change in control naming for all controls instead of just shared controls. Specifically, a control is always considered shared because it is always compared against itself. Solve this by never comparing against the widget containing the control being created. Equally, controls should never be shared between DAPM contexts; when the same codec is instantiated multiple times, the same kcontrol_new will be used. However, the control should no be shared between the multiple instances. I tested that with the Tegra WM8903 driver: * Shared is now mostly 0 as expected, and sometimes 1. * The expected controls are still generated after this change. However, I don't have any systems that have a widget/control naming prefix, so I can't test that aspect. Thanks for Jarkko Nikula for pointing out how to fix this. Reported-by: Liam Girdwood <lrg@ti.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-26ASoC: Fix power down for widgetless per-card DAPM context caseJarkko Nikula
Commit 52ba67b ("ASoC: Force all DAPM contexts into the same bias state") powers up all the DAPM contexts in a card if any DAPM context becomes active. Unfortunately power down newer happens if per-card DAPM context doesn't have any widgets. Reason for this is that power state of per-card DAPM context without widgets is never cleared and thus all the DAPM contexts remain permanently active. Test for widgetless calling DAPM context in dapm_power_widgets() doesn't work for per-card DAPM context since power change is never originating from widgetless per-card DAPM context. Fix this by pre-clearing power state flag of non-codec DAPM context at the beginning of power sequence. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-26ASoC: wm1250-ev1: Define "WM1250 Output" with SND_SOC_DAPM_OUTPUTAxel Lin
Codec output pin should be defined with SND_SOC_DAPM_OUTPUT. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-26ASoC: Remove duplicate linux/delay.h inclusion.Jesper Juhl
It's enough to include linux/delay.h just once in sound/soc/codecs/wm8915.c, so remove the duplicate. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-26ASoC: sam9g20_wm8731: use the proper SYSCKL valueNicolas Ferre
at91sam9g20 is providing master clock to wm8731: not using a crystal but an external MCLK. We can avoid conflict and save power using WM8731_SYSCLK_MCLK as we do not need oscillator to be powered. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-26ASoC: wm8731: fix wm8731_check_osc() connected conditionNicolas Ferre
The crystal oscillator is only enabled if the WM8731_SYSCLK_XTAL master clock is specified. Fix the connected() struct snd_soc_dapm_route function to take this into account. Oscillator is not enabled on machine that need it otherwise. Machine drivers have to make sure that they use the proper SYSCLK value. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-26ASoC: atmel_ssc_dai: fix ssc error pathNicolas Ferre
We do not have to free a resource that is not allocated yet. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-26ASoC: trivial: typo in atmel_pcm_dma_params strucutre commentNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-26ASoC: trivial: typo in debug commentNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-26ASoC: core: Don't schedule deferred_resume_work twiceStephen Warren
For cards that have two or more DAIs, snd_soc_resume's loop over all DAIs ends up calling schedule_work(deferred_resume_work) once per DAI. Since this is the same work item each time, the 2nd and subsequent calls return 0 (work item already queued), and trigger the dev_err message below stating that a work item may have been lost. Solve this by adjusting the loop to simply calculate whether to run the resume work immediately or defer it, and then call schedule work (or not) one time based on that. Note: This has not been tested in mainline, but only in chromeos-2.6.38; mainline doesn't support suspend/resume on Tegra, nor does the mainline Tegra ASoC driver contain multiple DAIs. It has been compile-checked in mainline. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-26ASoC: Fix comment in cs4270 codec driverDaniel Mack
The comment does not reflect reality anymore since the multi-component monster patch landed. Things are matched by names now, and not by exporting and referencing a struct. Fix it to avoid confusion. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: comments for the conversion to BATCH modeBen Gardiner
In the previous commit 'ASoC: davinci-pcm: convert to BATCH mode', the phase offset of 2 was mentioned in the commit message but not well commented in the source. Add descriptive comments of the phase offset with and without ping-pong buffers enabled. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: convert to BATCH modeBen Gardiner
The davinci-pcm driver's snd_pcm_ops pointer function currently calls into the edma controller driver to read the current positions of the edma channels to determine pos to return to the ALSA framework. In particular, davinci_pcm_pointer() calls edma_get_position() and the latter has a comment indicating that "Its channel should not be active when this is called" whereas the channel is surely active when snd_pcm_ops.pointer is called. The operation of davinci-pcm in capture and playback appears to follow close the other pcm drivers who export SNDRV_PCM_INFO_BATCH except that davinci-pcm does not report it's positions from pointer() using the last transferred chunk. Instead it peeks directly into the edma controller to determine the current position as discussed above. Convert the davinci-pcm driver to BATCH mode: count the periods elapsed in the prtd->period member and use its value to report the 'pos' to the alsa framework in the davinci_pcm_pointer function. There is a phase offset of 2 periods between the position used by dma setup and the position reported in the pointer function. Either +2 in the dma setup or -2 in the pointer function (with wrapping, both) accounts for this offset -- I opted for the latter since it makes the first-time setup clearer. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: extract period elapsed functionsBen Gardiner
Extract functions that modify the prtd->period member in preparation for conversion to BATCH mode playback. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: fix audible glitch on 2nd ping-pong playbackBen Gardiner
The release of the dma channels was being performed in prepare and there was a edma_resume call for the asp-channel only being executed on START, RESUME and PAUSE_RELEASE. The mcasp on da850evm with ping-pong buffers enabled was exhibiting an audible glitch on every playback after the first. It was determined through trial and error that the following two changes fix this problem: 1) Move the edma_start calls from prepare to trigger and 2) reverse the order of starting the asp and ram channels. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: increase the maximum channelsBen Gardiner
Based on the registration of davinci-mcasp.1 in the davinci-evm platform setup for da830 and dm6467, davinci-pcm can handle more than the currently reported maximum channels of 2. Increase the maximum channels to 384 to match the maximum reported by davinci-mcasp.1. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: expand the .formatsBen Gardiner
Based on the data_type test in ping_pong_dma_setup, davinci-pcm is capable of handling data of width up to and including 32bits. " if ((data_type == 0) || (data_type > 4)) { printk(KERN_ERR "%s: data_type=%i\n", __func__, data_type); return -EINVAL; } " Update the .format member of the snd_pcm_hardware instances it registers to reflect this capability. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: trivial: make ping-pong params setup symmetricalBen Gardiner
The setup of the pong channel uses EDMA_CHAN_SLOT instead of & 0x3f as the setup of the ping channel does. Make the setup of ping and pong symmetric. There is no functional change introduced by this patch. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: core - remove superfluous new line.Liam Girdwood
Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: core - fix module reference counting for CPU DAIsLiam Girdwood
Currently CODEC and platform drivers have their module reference count incremented soc_probe_dai_link() whilst CPU DAI drivers have their reference count incremented in soc_bind_dai_link(). CPU DAIs should have their reference count incremented in soc_probe_dai_link() just like the CODEC and platform drivers. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: fix raumfeld platformDaniel Mack
Commit f0fba2ad (ASoC: multi-component - ASoC Multi-Component Support) broke support for Raumfeld platforms as it didn't take into account the different hardware features on individual devices. In particular, Raumfeld speakers have no S/PDIF output, so the members of the snd_soc_card struct must be set dynamically. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-05-24ASoC: sh: fsi: add fsi_hw_startup/shutdownKuninori Morimoto
This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: cleanup suspend/resumeKuninori Morimoto
Current FSI driver was using saved_xxx variable for suspend/resume. OTOH, the start and stop of power/clock are controlled by fsi_hw_startup/fsi_hw_shutdown in current FSI driver. The all necessary registers value are set by fsi_hw_startup. So, if fsi_hw_shutdown is called when "suspend" is generated, and fsi_hw_startup is called at "resume", the saved_xxx are not needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: remove fsi_module_init/killKuninori Morimoto
FSIA/B ports is enabled by default when power-on, and current FSI is supporting RuntimePM. In addition, current fsi_module_init/kill doesn't care simultaneous playback/recorde. This mean FSI port control is not needed. This patch remove fsi_module_init/kill Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: make sure fsi_stream_push/pop access by spin lockKuninori Morimoto
fsi_stream_push/pop might be called in same time. This patch protect it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: remove pm_runtime from fsi_dai_set_fmt.Kuninori Morimoto
pm_runtime_get/put_sync were used to access FSI register in fsi_dai_set_fmt which is called when ALSA probe. But this register value will disappear after pm_runtime_put_sync if platform is supporting RuntimePM. To solve this issue, this patch adds new variable for format, and remove pm_runtime_get/put_sync from fsi_dai_set_fmt. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: tidyup unclear variable namingKuninori Morimoto
Some variables on this driver were a unclear naming, and were different unit (byte, frame, sample). And some functions had wrong name (ex. it returned "sample width" but name was "fsi_get_frame_width"). This patch tidy-up this issue, and the minimum unit become "sample". Special thanks to Takashi YOSHII. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: irq control moves to fsi_port_start/stopKuninori Morimoto
Using fsi_irq_enable/disable in fsi_port_start/stop is very natural. This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: add fsi_set_master_clkKuninori Morimoto
Current FSI driver is using set_rate call back function which is for master mode. By this patch, it is used from fsi_set_master_clk. This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: tidyup parameter of fsi_stream_pushKuninori Morimoto
It is possible to create buff_len and period_len from substream->runtime. This patch is preparation of tidyup unclear variable naming patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: Convert 16x16 write to use cpu_to_be16()Mark Brown
Make it clear what we're doing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-22Merge branch 'topic/asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.40
2011-05-22ASoC: core: Don't set "(null)" as a driver nameJarkko Nikula
Commit 22de71b ("ASoC: core - allow ASoC more flexible machine name") writes "(null)" to driver name string in struct snd_card if card->driver_name is NULL. This causes segmentation faults with some user space ALSA utilities like aplay and arecord. Fix this by using the card->name if no driver name is specified. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-20ASoC: soc-cache: Cache a pointer to the last accessed rbnodeDimitris Papastamos
Whenever we are doing a read or a write through the rbtree code, we'll cache a pointer to the rbnode. To avoid looking up the register everytime we do a read or a write, we first check if it can be found in the cached register block, otherwise we traverse the rbtree and finally cache the rbnode for future use. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-20ASoC: soc-cache: Block based rbtree compressionDimitris Papastamos
This patch prepares the ground for the actual rbtree optimization patch which will save a pointer to the last accessed rbnode that was used in either the read() or write() functions. Each rbnode manages a variable length block of registers. There can be no two nodes with overlapping blocks. Each block has a base register and a currently top register, all the other registers, if any, lie in between these two and in ascending order. The reasoning behind the construction of this rbtree is simple. In the snd_soc_rbtree_cache_init() function, we iterate over the register defaults provided by the driver. For each register value that is non-zero we insert it in the rbtree. In order to determine in which rbnode we need to add the register, we first look if there is another register already added that is adjacent to the one we are about to add. If that is the case we append it in that rbnode block, otherwise we create a new rbnode with a single register in its block and add it to the tree. In the next patch, where a cached rbnode is used by both the write() and the read() functions, we also check if the register we are about to add is in the cached rbnode (the least recently accessed one) and if so we append it in that rbnode block. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-20ASoC: Tegra: Fix compile when debugfs not enabledStephen Warren
The prototype of the inline dummy version of tegra_i2s_debug_add was not consistent with the real version. Reported-by: Rhyland-Klein <rklein@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-20ASoC: spdif-dit: Add missing MODULE_*Stephen Warren
MODULE_ALIAS is required so that the module will auto-load based on a platform_device registration in the board file. While we're at it, add some other MODULE_*. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-20Merge branch 'for-2.6.40' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2011-05-19ASoC: davinci-mcasp: enable ping-pong SRAM buffersBen Gardiner
The davinci-i2s driver copies the platform data for playback and capture sram sizes which is in turn used by davinci-pcm to allocate ping-pong buffers. Copy also the platform data in davinci-mcasp probe. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-19ASoC: add iPAQ hx4700 machine driverDmitry Artamonow
AK4641 connected via I2S and I2C, jack detection via GPIO. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>