summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-11-02Merge branch 'picoxcell/soc' into next/socArnd Bergmann
2011-11-02Merge branch 'highbank/soc' into next/socArnd Bergmann
Conflicts: arch/arm/mach-mxs/include/mach/gpio.h arch/arm/mach-omap2/board-generic.c arch/arm/plat-mxc/include/mach/gpio.h
2011-11-01Merge branch 'imx/devel' into next/dtArnd Bergmann
The board changes in the imx/devel branch conflict with other changes in the device imx/dt branch. Conflicts: arch/arm/mach-mx5/board-mx53_loco.c arch/arm/mach-mx5/board-mx53_smd.c arch/arm/plat-mxc/include/mach/common.h arch/arm/plat-mxc/include/mach/memory.h Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-01ARM: gic: use module.h instead of export.hArnd Bergmann
The module.h cleanup series is not merged at this point, so use the older header file for now, to make it build either way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31ARM: highbank: add suspend supportRob Herring
Add the platform suspend ops for highbank. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31ARM: highbank: Add cpu hotplug supportMartin Bogomolni
This adds cpu hotplug for highbank. On highbank, a core is always reset and boots up the same path as a cold boot. Signed-off-by: Martin Bogomolni <martin@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31ARM: highbank: add SMP supportRob Herring
This enables SMP support on highbank processor. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31MAINTAINERS: add Calxeda Highbank ARM platformRob Herring
Adding maintainer for arch/arm/mach-highbank/ Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31ARM: add Highbank core platform supportRob Herring
This adds basic support for the Calxeda Highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31ARM: highbank: add devicetree sourceRob Herring
This adds the devicetree source and documentation for the Calxeda highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31ARM: l2x0: add empty l2x0_of_initRob Herring
Add empty version of l2x0_of_init for when CONFIG_CACHE_L2X0 is not selected. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Barry Song <21cnbao@gmail.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31Merge branch 'dt/gic' into highbank/socArnd Bergmann
Conflicts: arch/arm/Kconfig
2011-10-31Merge branch 'depends/rmk/debug' into highbank/socArnd Bergmann
2011-10-31Merge branch 'dt/gic' into next/dtArnd Bergmann
Conflicts: arch/arm/include/asm/localtimer.h arch/arm/mach-msm/board-msm8x60.c arch/arm/mach-omap2/board-generic.c
2011-10-31Merge branch 'omap/dt' into next/dtArnd Bergmann
2011-10-31ARM: gic: fix irq_alloc_descs handling for sparse irqRob Herring
Commit "ARM: gic: add irq_domain support" (b49b6ff) breaks SPARSE_IRQ on platforms with GIC. When SPARSE_IRQ is enabled, all NR_IRQS or mach_desc->nr_irqs will be allocated by arch_probe_nr_irqs(). This caused irq_alloc_descs to allocate irq_descs after the pre-allocated space. Make irq_alloc_descs search for an exact irq range and assume it has been pre-allocated on failure. For DT probing dynamic allocation is used. DT enabled platforms should set their nr_irqs to NR_IRQ_LEGACY and have all irq_chips allocate their irq_descs with irq_alloc_descs if SPARSE_IRQ is enabled. gic_init irq_start param is changed to be signed with negative meaning do dynamic Linux irq assigment. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-10-31ARM: gic: add OF based initializationRob Herring
This adds ARM gic interrupt controller initialization using device tree data. The initialization function is intended to be called by of_irq_init function like this: const static struct of_device_id irq_match[] = { { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, {} }; static void __init init_irqs(void) { of_irq_init(irq_match); } Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31ARM: gic: add irq_domain supportRob Herring
Convert the gic interrupt controller to use irq domains in preparation for device-tree binding and MULTI_IRQ. This allows for translation between GIC interrupt IDs and Linux irq numbers. The meaning of irq_offset has changed. It now is just the number of skipped GIC interrupt IDs for the controller. It will be 16 for primary GIC and 32 for secondary GICs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31irq: support domains with non-zero hwirq baseRob Herring
Interrupt controllers can have non-zero starting value for h/w irq numbers. Adding support in irq_domain allows the domain hwirq numbering to match the interrupt controllers' numbering. As this makes looping over irqs for a domain more complicated, add loop iterators to iterate over all hwirqs and irqs for a domain. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-10-31of/irq: introduce of_irq_initRob Herring
of_irq_init will scan the devicetree for matching interrupt controller nodes. Then it calls an initialization function for each found controller in the proper order with parent nodes initialized before child nodes. Based on initial pseudo code from Grant Likely. Changes in v4: - Drop unnecessary empty list check - Be more verbose on errors - Simplify "if (!desc) WARN_ON(1)" to "if (WARN_ON(!desc))" Changes in v3: - add missing kfree's found by Jamie - Implement Grant's comments to simplify the init loop - fix function comments Changes in v2: - Complete re-write of list searching code from Grant Likely Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-30Merge branches 'depends/rmk/io', 'depends/rmk/l2x0' and 'depends/rmk/gpio' ↵Arnd Bergmann
into highbank/soc
2011-10-30Merge branches 'msm/dt', 'imx/dt' and 'at91/dt' into next/dtArnd Bergmann
2011-10-25ARM: at91: add at91sam9g20 and Calao USB A9G20 DT supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com>
2011-10-25ARM: at91: dt: at91sam9g45 family and board device tree filesNicolas Ferre
Create a new device tree source file for Atmel at91sam9g45 SoC family. The Evaluation Kit at91sam9m10g45ek includes it. This first basic support will be populated as drivers and boards will be converted to device tree. Contains serial, dma and interrupt controllers. The generic board file still takes advantage of platform data for early serial init. As we need a storage media and the NAND flash driver is not converted to DT yet, we keep old initialization for it. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com>
2011-10-24Merge remote-tracking branch 'rmk/devel-stable' into HEADRob Herring
2011-10-24Linux 3.1v3.1Linus Torvalds
2011-10-24Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: intel-iommu: fix superpage support in pfn_to_dma_pte() intel-iommu: set iommu_superpage on VM domains to lowest common denominator intel-iommu: fix return value of iommu_unmap() API MAINTAINERS: Update VT-d entry for drivers/pci -> drivers/iommu move intel-iommu: Export a flag indicating that the IOMMU is used for iGFX. intel-iommu: Workaround IOTLB hang on Ironlake GPU intel-iommu: Fix AB-BA lockdep report
2011-10-24Merge branch 'for-linus' of http://people.redhat.com/agk/git/linux-dmLinus Torvalds
* 'for-linus' of http://people.redhat.com/agk/git/linux-dm: dm kcopyd: fix job_pool leak
2011-10-24x86: Fix S4 regressionTakashi Iwai
Commit 4b239f458 ("x86-64, mm: Put early page table high") causes a S4 regression since 2.6.39, namely the machine reboots occasionally at S4 resume. It doesn't happen always, overall rate is about 1/20. But, like other bugs, once when this happens, it continues to happen. This patch fixes the problem by essentially reverting the memory assignment in the older way. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Yinghai Lu <yinghai.lu@oracle.com> [ We'll hopefully find the real fix, but that's too late for 3.1 now ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-23dm kcopyd: fix job_pool leakAlasdair G Kergon
Fix memory leak introduced by commit a6e50b409d3f9e0833e69c3c9cca822e8fa4adbb (dm snapshot: skip reading origin when overwriting complete chunk). When allocating a set of jobs from kc->job_pool, job->master_job must be set (to point to itself) so that the mempool item gets freed when the master_job completes. master_job was introduced by commit c6ea41fbbe08f270a8edef99dc369faf809d1bd6 (dm kcopyd: preallocate sub jobs to avoid deadlock) Reported-by: Michael Leun <ml@newton.leun.net> Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-10-23Merge branch 'ppi-irq-core-for-rmk' of ↵Russell King
git://github.com/mzyngier/arm-platforms into devel-stable
2011-10-23ARM: gic, local timers: use the request_percpu_irq() interfaceMarc Zyngier
This patch remove the hardcoded link between local timers and PPIs, and convert the PPI users (TWD, MCT and MSM timers) to the new *_percpu_irq interface. Also some collateral cleanup (local_timer_ack() is gone, and the interrupt handler is strictly private to each driver). PPIs are now useable for more than just the local timers. Additional testing by David Brown (msm8250 and msm8660) and Shawn Guo (imx6q). Cc: David Brown <davidb@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-23ARM: gic: consolidate PPI handlingMarc Zyngier
PPI handling is a bit of an odd beast. It uses its own low level handling code and is hardwired to the local timers (hence lacking a registration interface). Instead, switch the low handling to the normal SPI handling code. PPIs are handled by the handle_percpu_devid_irq flow. This also allows the removal of some duplicated code. Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-23Merge commit '32cffdd' into ppi-irq-core-for-rmkMarc Zyngier
2011-10-23Merge branch 'samsung-fixes-4' of git://github.com/kgene/linux-samsungLinus Torvalds
* 'samsung-fixes-4' of git://github.com/kgene/linux-samsung: ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PM ARM: S5P: fix offset calculation on gpio-interrupt
2011-10-23Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Fix negative 8-bit temperature values
2011-10-22ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PMDomenico Andreoli
v2: - register_syscore_ops(&s3c24xx_irq_syscore_ops) does not need to be conditionally compiled out, it is already optimized out on !CONFIG_PM - fix also s3c2412 and s3c2416 affected by the same build issue v1: s3c2440.c fails to build if !CONFIG_PM because in such case s3c2410_pm_syscore_ops is not defined. Same error should happen also in s3c2410.c and s3c2442.c Signed-off-by: Domenico Andreoli <cavokz@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-21Merge git://github.com/herbertx/cryptoLinus Torvalds
* git://github.com/herbertx/crypto: crypto: ghash - Avoid null pointer dereference if no key is set
2011-10-21Merge branch 'fix/hda' of git://github.com/tiwai/soundLinus Torvalds
* 'fix/hda' of git://github.com/tiwai/sound: ALSA: HDA: conexant support for Lenovo T520/W520 ALSA: hda - Add position_fix quirk for Dell Inspiron 1010
2011-10-21crypto: ghash - Avoid null pointer dereference if no key is setNick Bowler
The ghash_update function passes a pointer to gf128mul_4k_lle which will be NULL if ghash_setkey is not called or if the most recent call to ghash_setkey failed to allocate memory. This causes an oops. Fix this up by returning an error code in the null case. This is trivially triggered from unprivileged userspace through the AF_ALG interface by simply writing to the socket without setting a key. The ghash_final function has a similar issue, but triggering it requires a memory allocation failure in ghash_setkey _after_ at least one successful call to ghash_update. BUG: unable to handle kernel NULL pointer dereference at 00000670 IP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ghash_generic gf128mul algif_hash af_alg nfs lockd nfs_acl sunrpc bridge ipv6 stp llc Pid: 1502, comm: hashatron Tainted: G W 3.1.0-rc9-00085-ge9308cf #32 Bochs Bochs EIP: 0060:[<d88c92d4>] EFLAGS: 00000202 CPU: 0 EIP is at gf128mul_4k_lle+0x23/0x60 [gf128mul] EAX: d69db1f0 EBX: d6b8ddac ECX: 00000004 EDX: 00000000 ESI: 00000670 EDI: d6b8ddac EBP: d6b8ddc8 ESP: d6b8dda4 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process hashatron (pid: 1502, ti=d6b8c000 task=d6810000 task.ti=d6b8c000) Stack: 00000000 d69db1f0 00000163 00000000 d6b8ddc8 c101a520 d69db1f0 d52aa000 00000ff0 d6b8dde8 d88d310f d6b8a3f8 d52aa000 00001000 d88d502c d6b8ddfc 00001000 d6b8ddf4 c11676ed d69db1e8 d6b8de24 c11679ad d52aa000 00000000 Call Trace: [<c101a520>] ? kmap_atomic_prot+0x37/0xa6 [<d88d310f>] ghash_update+0x85/0xbe [ghash_generic] [<c11676ed>] crypto_shash_update+0x18/0x1b [<c11679ad>] shash_ahash_update+0x22/0x36 [<c11679cc>] shash_async_update+0xb/0xd [<d88ce0ba>] hash_sendpage+0xba/0xf2 [algif_hash] [<c121b24c>] kernel_sendpage+0x39/0x4e [<d88ce000>] ? 0xd88cdfff [<c121b298>] sock_sendpage+0x37/0x3e [<c121b261>] ? kernel_sendpage+0x4e/0x4e [<c10b4dbc>] pipe_to_sendpage+0x56/0x61 [<c10b4e1f>] splice_from_pipe_feed+0x58/0xcd [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b51f5>] __splice_from_pipe+0x36/0x55 [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b6383>] splice_from_pipe+0x51/0x64 [<c10b63c2>] ? default_file_splice_write+0x2c/0x2c [<c10b63d5>] generic_splice_sendpage+0x13/0x15 [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b527f>] do_splice_from+0x5d/0x67 [<c10b6865>] sys_splice+0x2bf/0x363 [<c129373b>] ? sysenter_exit+0xf/0x16 [<c104dc1e>] ? trace_hardirqs_on_caller+0x10e/0x13f [<c129370c>] sysenter_do_call+0x12/0x32 Code: 83 c4 0c 5b 5e 5f c9 c3 55 b9 04 00 00 00 89 e5 57 8d 7d e4 56 53 8d 5d e4 83 ec 18 89 45 e0 89 55 dc 0f b6 70 0f c1 e6 04 01 d6 <f3> a5 be 0f 00 00 00 4e 89 d8 e8 48 ff ff ff 8b 45 e0 89 da 0f EIP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] SS:ESP 0068:d6b8dda4 CR2: 0000000000000670 ---[ end trace 4eaa2a86a8e2da24 ]--- note: hashatron[1502] exited with preempt_count 1 BUG: scheduling while atomic: hashatron/1502/0x10000002 INFO: lockdep is turned off. [...] Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Cc: stable@kernel.org [2.6.37+] Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-10-21ARM: S5P: fix offset calculation on gpio-interruptMarek Szyprowski
Offsets of the irq controller registers were calculated correctly only for first GPIO bank. This patch fixes calculation of the register offsets for all GPIO banks. Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-20ARM: smp: fix clipping of number of CPUsRussell King
Rather than clipping the number of CPUs using the compile-time NR_CPUS constant, use the runtime nr_cpu_ids value instead. This allows the nr_cpus command line option to work as expected. Cc: <stable@kernel.org> Reported-by: Mark Salter <msalter@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Add alignment flag to PCI expansion resources sparc: Avoid calling sigprocmask() sparc: Use set_current_blocked() sparc32,leon: SRMMU MMU Table probe fix
2011-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fib_rules: fix unresolved_rules counting r8169: fix wrong eee setting for rlt8111evl r8169: fix driver shutdown WoL regression. ehea: Change maintainer to me pptp: pptp_rcv_core() misses pskb_may_pull() call tproxy: copy transparent flag when creating a time wait pptp: fix skb leak in pptp_xmit() bonding: use local function pointer of bond->recv_probe in bond_handle_frame smsc911x: Add support for SMSC LAN89218 tg3: negate USE_PHYLIB flag check netconsole: enable netconsole can make net_device refcnt incorrent bluetooth: Properly clone LSM attributes to newly created child connections l2tp: fix a potential skb leak in l2tp_xmit_skb() bridge: fix hang on removal of bridge via netlink x25: Prevent skb overreads when checking call user data x25: Handle undersized/fragmented skbs x25: Validate incoming call user data lengths udplite: fast-path computation of checksum coverage IPVS netns shutdown/startup dead-lock netfilter: nf_conntrack: fix event flooding in GRE protocol tracker
2011-10-20hwmon: (w83627ehf) Fix negative 8-bit temperature valuesJean Delvare
Since 8-bit temperature values are now handled in 16-bit struct members, values have to be cast to s8 for negative temperatures to be properly handled. This is broken since kernel version 2.6.39 (commit bce26c58df86599c9570cee83eac58bdaae760e4.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-20Merge branch 'imx-features-for-arnd' of ↵Arnd Bergmann
git://git.pengutronix.de/git/imx/linux-2.6 into imx/devel Conflicts: arch/arm/mach-mx5/clock-mx51-mx53.c arch/arm/mach-mx5/devices-imx53.h
2011-10-19mm: fix race between mremap and removing migration entryHugh Dickins
I don't usually pay much attention to the stale "? " addresses in stack backtraces, but this lucky report from Pawel Sikora hints that mremap's move_ptes() has inadequate locking against page migration. 3.0 BUG_ON(!PageLocked(p)) in migration_entry_to_page(): kernel BUG at include/linux/swapops.h:105! RIP: 0010:[<ffffffff81127b76>] [<ffffffff81127b76>] migration_entry_wait+0x156/0x160 [<ffffffff811016a1>] handle_pte_fault+0xae1/0xaf0 [<ffffffff810feee2>] ? __pte_alloc+0x42/0x120 [<ffffffff8112c26b>] ? do_huge_pmd_anonymous_page+0xab/0x310 [<ffffffff81102a31>] handle_mm_fault+0x181/0x310 [<ffffffff81106097>] ? vma_adjust+0x537/0x570 [<ffffffff81424bed>] do_page_fault+0x11d/0x4e0 [<ffffffff81109a05>] ? do_mremap+0x2d5/0x570 [<ffffffff81421d5f>] page_fault+0x1f/0x30 mremap's down_write of mmap_sem, together with i_mmap_mutex or lock, and pagetable locks, were good enough before page migration (with its requirement that every migration entry be found) came in, and enough while migration always held mmap_sem; but not enough nowadays, when there's memory hotremove and compaction. The danger is that move_ptes() lets a migration entry dodge around behind remove_migration_pte()'s back, so it's in the old location when looking at the new, then in the new location when looking at the old. Either mremap's move_ptes() must additionally take anon_vma lock(), or migration's remove_migration_pte() must stop peeking for is_swap_entry() before it takes pagetable lock. Consensus chooses the latter: we prefer to add overhead to migration than to mremapping, which gets used by JVMs and by exec stack setup. Reported-and-tested-by: Paweł Sikora <pluto@agmk.net> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-19sparc: Add alignment flag to PCI expansion resourcesKjetil Oftedal
Currently no type of alignment is specified for PCI expansion roms while parsing the openfirmware tree. This causes calls to pci_map_rom() to fail. IORESOURCE_SIZEALIGN is the default alignment used for rom resouces in pci/probe.c, and has been verified to work with various cards on a ultra 10. Signed-off-By: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19fib_rules: fix unresolved_rules countingYan, Zheng
we should decrease ops->unresolved_rules when deleting a unresolved rule. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19r8169: fix wrong eee setting for rlt8111evlhayeswang
Correct the wrong parameter for setting EEE for RTL8111E-VL. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-03 16:00:16 +0000