summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2007-10-16sm501fb: update suspend and resume codeBen Dooks
The suspend and resume code is failing to restore the CRT control register, thus causing the CRT data-path to get changed if the SM501 experiences a reset over suspend. Also move some of the debug messages to dev_dbg() level and ensure that the suspend code does not try and restore anything it did not manage to save. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16pm2fb: accelerated 24-bit fillrectKrzysztof Helt
This patch adds accelerated fillrect for 24-bit depth. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16pm2fb: Permedia 2V initialization fixesKrzysztof Helt
This patch: - initializes correctly the Permedia2V chip if it is not initialized by BIOS - puts back clock frequency for the ELSA WINNER board to 100kHz - fixes returned error values from setcolreg() function - uses more general classes for PCI ids Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16pm2fb: source code improvementsKrzysztof Helt
This patch concentrates on source compacting, simplification and more conformance to kernel coding standards. The major changes: - RD32() and WR() functions are merged into pm2_RD() and pm2_WR() - conditional (with switch()) RDAC functions are separated in two unconditional ones - the conditional pm2fb_block_op() function is merged into pm2fb_fillrect() and pm2fb_copyarea() - WAIT_FIFO() values are corrected Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16pm2fb: accelerated imageblitKrzysztof Helt
This patch adds accelerated imageblit function. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16pm3fb: mtrr support and noaccel optionKrzysztof Helt
This patch adds usage of MTRR registers and two new options: noaccel and nomtrr. [bunk@kernel.org: make pm3fb_init() static again] Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16pm3fb: improvements and cleanupsKrzysztof Helt
This patch contains improvements: - it adds ROP_XOR in pm3fb_fillrect() - it conforms closer to coding style - it removes redundant parentheses and setting bits with 0 value - it checks if hardware acceleration is disabled in pm3fb_imageblit - it adds module description Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16pm3fb: 3 small fixesKrzysztof Helt
This patch contains 3 small improvements: - it corrects scan line width calculation in pm3fb_imageblit() - it corrects mmio mapping for big endian machines - it enables panning acceleration constants Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16pm3fb: imageblit improvedKrzysztof Helt
This patch removes the pm3_imageblit() restriction to blit only images with width divisable by 32. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16pm3fb: header file reductionKrzysztof Helt
This patch removes constants named AAA_DISABLE with value 0. They are redudant and misleading ( a |= AAA_DISABLE does nothing and usually should be a &= ~AAA_ENABLE). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16skeletonfb: wrong field name fixKrzysztof Helt
This patch corrects name of the field. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16pm3fb: copyarea and partial imageblit supporKrzysztof Helt
This patch adds accelerated copyarea and partially accelerated imageblit functions. There is also fixed one register address in the pm3fb.h file. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16uvesafb: documentationMichal Januszewski
Documentation for the uvesafb driver. Signed-off-by: Michal Januszewski <spock@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16uvesafb: the driver coreMichal Januszewski
uvesafb is an enhanced version of vesafb. It uses a userspace helper (v86d) to execute calls to the x86 Video BIOS functions. The driver is not limited to any specific arch and whether it works on a given arch or not depends on that arch being supported by the userspace daemon. It has been tested on x86_32 and x86_64. A single BIOS call is represented by an instance of the uvesafb_ktask structure. This structure contains a buffer, a completion struct and a uvesafb_task substructure, containing the values of the x86 registers, a flags field and a field indicating the length of the buffer. Whenever a BIOS call is made in the driver, uvesafb_exec() builds a message using the uvesafb_task substructure and the contents of the buffer. This message is then assigned a random ack number and sent to the userspace daemon using the connector interface. The message's sequence number is used as an index for the uvfb_tasks array, which provides a mapping from the messages coming from userspace to the in-kernel uvesafb_ktask structs. The userspace daemon performs the requested operation and sends a reply in the form of a uvesafb_task struct and, optionally, a buffer. The seq and ack numbers in the reply should be exactly the same as those in the request. Each message from userspace is processed by uvesafb_cn_callback() and after passing a few sanity checks leads to the completion of a BIOS call request. Signed-off-by: Michal Januszewski <spock@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Paulo Marques <pmarques@grupopie.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16uvesafb: add connector entriesMichal Januszewski
Add connector idx and val constants for v86d and uvesafb. Signed-off-by: Michal Januszewski <spock@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16connector: change connector's max message sizeMichal Januszewski
Change the maximum message size to 16k to allow transfers of VBE data blocks from userspace. Signed-off-by: Michal Januszewski <spock@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16fbdev: export fb_destroy_modelistMichal Januszewski
Make fb_destroy_modelist an exported symbol for use in the uvesafb driver. Signed-off-by: Michal Januszewski <spock@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16rtc: allow validated RTC_PIE_ON for non-rootBryan Kadzban
drivers/char/rtc.c allowed RTC_PIE_ON ioctls for non-root users, as long as the current interval (set via RTC_IRQP_SET) is <= max_user_freq. Allow RTC_PIE_ON under the same conditions when /dev/rtc* is handled by the rtc subsystem. Signed-off-by: Bryan Kadzban <bryan@kdzbn.homelinux.net> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16rtc: add max_user_freq to sysfsBryan Kadzban
drivers/char/rtc.c exposed a sysctl to change the maximum frequency at which a non-root user could ask the RTC to generate interrupts (via the RTC_IRQP_SET ioctl). This value is no longer available under the new RTC subsystem, so add it to sysfs for each RTC device. Works for me on x86_64 (both reads and writes), using rtc-cmos. Signed-off-by: Bryan Kadzban <bryan@kdzbn.homelinux.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16rtc-cmos probe() cleanupDavid Brownell
Some cleanups for the rtc-cmos probe logic: - Claim i/o ports with request_region() not request_resource(), for better coexistence betwen platform and pnp bus glues. - Claim those ports earlier, to help work around procfs bugs (it allows duplicate names, like /proc/driver/rtc). - Fix some glitches in cleanup code, notably a cut'n'paste-o where the i/o port region might not get released during cleanup after a probe fault. And some comment clarifications, including noting that this code must work with PNPBIOS not just PNPACPI.. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16rtc: fix readback from /sys/class/rtc/rtc?/wakealarmMark Lord
Fix readback of RTC alarms on platforms which return -1 in non-hardware-supported RTC alarm fields. To fill in the missing (-1) values, we grab an RTC timestamp along with the RTC alarm value, and use the timestamp fields to populate the missing alarm fields. To counter field-wrap races (since the timestamp and alarm are not read together atomically), we read the RTC timestamp both before and after reading the RTC alarm value, and then check for wrapped fields --> if any have wrapped, we know we have a possible inconsistency, so we loop and reread the timestamp and alarm again. Wrapped fields in the RTC timestamps are an issue because rtc-cmos.c, for example, also gets/uses an RTC timestamp internally while fetching the RTC alarm. If our timestamp here wasn't the same (minutes and higher) as what was used internally there, then we might end up populating the -1 fields with inconsistent values. This fixes readbacks from /sys/class/rtc/rtc?/wakealarm, as well as other code paths which call rtc_read_alarm(). Signed-off-by: Mark Lord <mlord@pobox.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16rtc: RTC class driver for the ds1374Scott Wood
This patch adds an RTC class driver for the Maxim/Dallas 1374 RTC chip, based on drivers/i2c/chips/ds1374.c. It supports alarm functionality. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16rtc-pcf8583: Check for i2c adapter functionalityJean Delvare
Not all i2c adapters support I2C-level messaging. Check that the adapter does before probing for a PCF8583 chip, as the driver makes use of i2c_transfer and i2c_master_send. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16rtc: make rtc-ds1742 driver hotplug-awareAtsushi Nemoto
The rtc-ds1742 platform driver name doesn't match its module name, which might prevents it from properly hotplugging. There is only two in-tree user of its driver, which are fixed by this patch too. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16rtc: make rtc-ds1553 driver hotplug-awareAtsushi Nemoto
The rtc-ds1553 platform driver name doesn't match its module name, which might prevent it from properly hotplugging. This driver has no in-tree users. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16rtc-dev: no need to convert file->private_data to rtc deviceMark Zhan
In rtc-dev.c, when a rtc device is opened, file->private_data is already attached with the rtc device pointer, so there is no need to call to_rtc_device() to convert file->private_data to a rtc device pointer. Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16rtc_irq_set_freq() requires power-of-two and associated kerneldocDavid Brownell
RTC periodic IRQs are only defined to work for 2^N Hz values. This patch moves that validity check into the infrastructure, so drivers don't need to check it; and adds kerneldoc for the two interface functions related to periodic IRQs. (One of which was quite mysterious until its first use was recently checked in!) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16RTC: periodic irq fixAlessandro Zummo
Add kernel/kernel and kernel/user locking for the periodic irq feature of the rtc class. PIE ioctls are also supported. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16ecryptfs: clean up page flag handlingMichael Halcrow
The functions that eventually call down to ecryptfs_read_lower(), ecryptfs_decrypt_page(), and ecryptfs_copy_up_encrypted_with_header() should have the responsibility of managing the page Uptodate status. This patch gets rid of some of the ugliness that resulted from trying to push some of the page flag setting too far down the stack. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: replace magic numbersMichael Halcrow
Replace some magic numbers with sizeof() equivalents. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: remove unused functions and kmem_cacheMichael Halcrow
The switch to read_write.c routines and the persistent file make a number of functions unnecessary. This patch removes them. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: initialize persistent lower file on inode createMichael Halcrow
Initialize persistent lower file on inode create. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: fix data typesMichael Halcrow
Update data types and add casts in order to avoid potential overflow issues. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: convert mmap functions to use persistent fileMichael Halcrow
Convert readpage, prepare_write, and commit_write to use read_write.c routines. Remove sync_page; I cannot think of a good reason for implementing that in eCryptfs. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: make open, truncate, and setattr use persistent fileMichael Halcrow
Rather than open a new lower file for every eCryptfs file that is opened, truncated, or setattr'd, instead use the existing lower persistent file for the eCryptfs inode. Change truncate to use read_write.c functions. Change ecryptfs_getxattr() to use the common ecryptfs_getxattr_lower() function. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: update metadata read/write functionsMichael Halcrow
Update the metadata read/write functions and grow_file() to use the read_write.c routines. Do not open another lower file; use the persistent lower file instead. Provide a separate function for crypto.c::ecryptfs_read_xattr_region() to get to the lower xattr without having to go through the eCryptfs getxattr. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: set up and destroy persistent lower fileMichael Halcrow
This patch sets up and destroys the persistent lower file for each eCryptfs inode. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: replace encrypt, decrypt, and inode size writeMichael Halcrow
Replace page encryption and decryption routines and inode size write routine with versions that utilize the read_write.c functions. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: read_write.c routinesMichael Halcrow
Add a set of functions through which all I/O to lower files is consolidated. This patch adds a new inode_info reference to a persistent lower file for each eCryptfs inode; another patch later in this series will set that up. This persistent lower file is what the read_write.c functions use to call vfs_read() and vfs_write() on the lower filesystem, so even when reads and writes come in through aops->readpage and aops->writepage, we can satisfy them without resorting to direct access to the lower inode's address space. Several function declarations are going to be changing with this patchset. For now, in order to keep from breaking the build, I am putting dummy parameters in for those functions. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16ecryptfs: fix error handlingMichael Halcrow
The error paths and the module exit code need work. sysfs unregistration is not the right place to tear down the crypto subsystem, and the code to undo subsystem initializations on various error paths is unnecessarily duplicated. This patch addresses those issues. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: remove assignments in if-statementsMichael Halcrow
Remove assignments in if-statements. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: remove header_extent_sizeMichael Halcrow
There is no point to keeping a separate header_extent_size and an extent_size. The total size of the header can always be represented as some multiple of the regular data extent size. [randy.dunlap@oracle.com: ecryptfs: fix printk format warning] Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: Use generic_file_splice_read()Michael Halcrow
eCryptfs is currently just passing through splice reads to the lower filesystem. This is obviously incorrect behavior; the decrypted data is what needs to be read, not the lower encrypted data. I cannot think of any good reason for eCryptfs to implement splice_read, so this patch points the eCryptfs fops splice_read to use generic_file_splice_read. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Reviewed-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: make needlessly global symbols staticMichael Halcrow
Andrew Morton wrote: > Please check that all the newly-added global symbols do indeed need > to be global. Change symbols in keystore.c and crypto.o to static if they do not need to be global. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: remove unnecessary variable initializationsMichael Halcrow
Andrew Morton wrote: > > struct mutex *tfm_mutex = NULL; > > This initialisation looks like it's here to kill bogus gcc warning > (if it is, it should have been commented). Please investigate > uninitialized_var() and __maybe_unused sometime. Remove some unnecessary variable initializations. There may be a few more such intializations remaining in the code base; a future patch will take care of those. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: kerneldoc fixes for crypto.c and keystore.cMichael Halcrow
Andrew Morton wrote: From: mhalcrow@us.ibm.com <mhalcrow@halcrow.austin.ibm.com> > > +/** > > + * decrypt_passphrase_encrypted_session_key - Decrypt the session key > > + * with the given auth_tok. > > * > > * Returns Zero on success; non-zero error otherwise. > > */ > > That comment purports to be a kerneldoc-style comment. But > > - kerneldoc doesn't support multiple lines on the introductory line > which identifies the name of the function (alas). So you'll need to > overflow 80 cols here. > > - the function args weren't documented > > But the return value is! People regularly forget to do that. And > they frequently forget to document the locking prerequisites and the > permissible calling contexts (process/might_sleep/hardirq, etc) > > (please check all ecryptfs kerneldoc for this stuff sometime) This patch cleans up some of the existing comments and makes a couple of line break tweaks. There is more work to do to bring eCryptfs into full kerneldoc-compliance. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: comments for some structsMichael Halcrow
Andrew Morton wrote: > > +struct ecryptfs_global_auth_tok { > > +#define ECRYPTFS_AUTH_TOK_INVALID 0x00000001 > > + u32 flags; > > + struct list_head mount_crypt_stat_list; > > + struct key *global_auth_tok_key; > > + struct ecryptfs_auth_tok *global_auth_tok; > > + unsigned char sig[ECRYPTFS_SIG_SIZE_HEX + 1]; > > +}; > > + > > +struct ecryptfs_key_tfm { > > + struct crypto_blkcipher *key_tfm; > > + size_t key_size; > > + struct mutex key_tfm_mutex; > > + struct list_head key_tfm_list; > > + unsigned char cipher_name[ECRYPTFS_MAX_CIPHER_NAME_SIZE + 1]; > > +}; > > Please consider commenting your struct fields carefully: it's a > great way to help other to understand your code. Add some comments to the ecryptfs_global_auth_tok and ecryptfs_key_tfm structs to make their functions more easily ascertained. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: grammatical fix (destruct to destroy)Michael Halcrow
Andrew Morton wrote: > > +int ecryptfs_destruct_crypto(void) > > ecryptfs_destroy_crypto would be more grammatically correct ;) Grammatical fix for some function names. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: collapse flag set into one statementMichael Halcrow
Andrew Morton wrote: > > + crypt_stat->flags |= ECRYPTFS_ENCRYPTED; > > + crypt_stat->flags |= ECRYPTFS_KEY_VALID; > > Maybe the compiler can optimise those two statements, but we'd > normally provide it with some manual help. This patch provides the compiler with some manual help for optimizing the setting of some flags. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16eCryptfs: remove unnecessary BUG_ONMichael Halcrow
Andrew Morton wrote: > > + mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex); > > + BUG_ON(mount_crypt_stat->num_global_auth_toks == 0); > > + mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex); > > That's odd-looking. If it was a bug for num_global_auth_toks to be > zero, and if that mutex protects num_global_auth_toks then as soon > as the lock gets dropped, another thread can make > num_global_auth_toks zero, hence the bug is present. Perhaps? That was serving as an internal sanity check that should not have made it into the final patch set in the first place. This patch removes it. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>