summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-12-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-12-23enic: whitespace cleanup; #define cleanup; more verbose err msgScott Feldman
Some misc changes to cleanup whitespace issues and fix/remove some #define HW defintions. 1) fix some whitespace issues 2) more verbose err msg when resources aren't available to configure vnic 3) remove unused #define 4) fix RSS #define rss hash types Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23enic: feature add: add ethtool -c/C supportScott Feldman
Only rx_usec and tx_usec options for ethtool -C are settable as those are the only settings that make sense to HW. Adds driver reporting of intr coalescing timer value in usec units rather than HW units. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23enic: Bug fix: align desc ring sizes to 32 descsScott Feldman
Previous driver was aligning ring sizes to 16 descs, but hardware actually wants desc ring sizes to be aligned to 32 descs. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23enic: minimize pkt filter updates to firmwareScott Feldman
In set_multicast(), only push pkt filter changes down to firmware if pkt filter actually changes. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23enic: Bug fix: try harder to fill Rx ring on skb allocation failuresScott Feldman
During dev->open(), make sure we get at least one skb on the Rx ring. Otherwise abort the interface load. Also, if we get skb allocation failures in NAPI poll while trying to replenish the ring, try again later so we don't end up starving out the Rx ring completely. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23enic: Bug fix: use safe queue shutdown in dev->stopScott Feldman
Fix dev->stop shutdown bug where driver was stopping xmit queue and then disabling intrs. Fix is to disable intrs first and then stop the xmit queue, otherwise an interrupt could cause the queue to be rewoken. Also, no need to explicitly do queue servicing because queues are cleaned and reset back to initial state at end of dev->stop. Servicing queues also had the side-effect of also rewakening the xmit queue, which is not what we want. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23iwmc3200top: simplify imwct_txTomas Winkler
1. remove address argument since we use same address IWMC_SDIO_DATA_ADDR in all cases 2. add __iwmct_tx - non locking tx function for already locked contexts Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23iwmc3200top: cleanup log messagesTomas Winkler
1. add TRACE level 2. use TRACE where needed to reduce the noise 3 don't INFOEX from driver 4. add DUMP level for packets dumps 5. use correct context for the log messages Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23iwmc3200top: clean up fw_downloadTomas Winkler
1. removed redundant NULL-pointers checks in iwmct_fw_load as release_firmware and kfree are NULL pointer friendly 2. remove redundant memset of the parser since the structure is fully initialized in iwmct_fw_parser_init function Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23net: Add rtnetlink init_rcvwnd to set the TCP initial receive windowlaurent chavey
Add rtnetlink init_rcvwnd to set the TCP initial receive window size advertised by passive and active TCP connections. The current Linux TCP implementation limits the advertised TCP initial receive window to the one prescribed by slow start. For short lived TCP connections used for transaction type of traffic (i.e. http requests), bounding the advertised TCP initial receive window results in increased latency to complete the transaction. Support for setting initial congestion window is already supported using rtnetlink init_cwnd, but the feature is useless without the ability to set a larger TCP initial receive window. The rtnetlink init_rcvwnd allows increasing the TCP initial receive window, allowing TCP connection to advertise larger TCP receive window than the ones bounded by slow start. Signed-off-by: Laurent Chavey <chavey@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23net: release dst entry while cache-hot for GSO case tooKrishna Kumar
Non-GSO code drops dst entry for performance reasons, but the same is missing for GSO code. Drop dst while cache-hot for GSO case too. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23tcp: Slightly optimize tcp_sendmsgKrishna Kumar
Slightly optimize tcp_sendmsg since NETIF_F_SG is used many times iteratively in the loop. The only other modification is to change: } else if (i == MAX_SKB_FRAGS || (!i && !(sk->sk_route_caps & NETIF_F_SG))) { to: } else if (i == MAX_SKB_FRAGS || !sg) { The reason why this change is correct: this code (other than the MAX_SKB_FRAGS case) executes only due to the else part of: "if (skb_tailroom(skb) > 0) {" - i.e. there was no space in the skb to put the data inline. Hence SG is false is a sufficient condition, and there is no way a fragment can be added to the skb. Changelog: - Added the above explanation for the change Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23tcp: Remove unrequired operations in tcp_push()Krishna Kumar
Remove unrequired operations in tcp_push() Changelog: Removed a temporary skb variable from tcp_push() Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23tcp: Remove check in __tcp_push_pending_framesKrishna Kumar
tcp_push checks tcp_send_head and calls __tcp_push_pending_frames, which again checks tcp_send_head, and this unnecessary check is done for every other caller of __tcp_push_pending_frames. Remove tcp_send_head check in __tcp_push_pending_frames and add the check to tcp_push_pending_frames. Other functions call __tcp_push_pending_frames only when tcp_send_head would evaluate to true. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23netxen: fix unified fw size checkAmit Kumar Salecha
o Unified firmware image size can be < 1 MB Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23netxen: support pci error handlersAmit Kumar Salecha
o Support pci error detection and recovery. o Refactor suspend and resume code, to share with io_error_detected, and slot_reset callbacks o NX_NEED_AER device state added, to synchronize with firmware recovery. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23netxen: fix tx timeout recoveryAmit Kumar Salecha
o In case of tx timeout, firmare may be healthy, but some pci-func may see no response from it. Force firmware reset, if some pci-func explicitly requests so. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23netxen: minor suspend resume fixesAmit Kumar Salecha
o pci device should be disable at the end and it should be enable first. o Interface should be attached(netif_device_attach()) irrespective of its state. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (30 commits) USB: Fix a bug on appledisplay.c regarding signedness USB: option: support hi speed for modem Haier CE100 USB: audio gadget: free alsa devices when unloading USB: audio gadget: fix wTotalLength calculation usb: otg: isp1301_omap: fix compile error USB: musb: workaround Blackfin FIFO anomalies USB: musb: Fix array index out of bounds issue USB: musb: Fix null pointer dereference issue USB: musb: correct DMA address for tx USB: musb: gadget_ep0: avoid SetupEnd interrupt USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabled USB: musb: do not work if no gadget driver is loaded USB: musb: gadget: set otg tranceiver to idle when registering gadget USB: musb: Populate the VBUS GPIO with the correct GPIO number USB: musb: MAINTAINERS: Fix my tree's address USB: musb: fix compiling warning with min() macro USB: musb: move musb_remove to __exit USB: musb_gadget: fix kernel oops in txstate() USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h header USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header ...
2009-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: devtmpfs: unlock mutex in case of string allocation error Driver core: export platform_device_register_data as a GPL symbol driver core: Prevent reference to freed memory on error path Driver-core: Fix bogus 0 error return in device_add() Driver core: driver_attribute parameters can often be const* Driver core: bin_attribute parameters can often be const* Driver core: device_attribute parameters can often be const* Doc/stable rules: add new cherry-pick logic vfs: get_sb_single() - do not pass options twice devtmpfs: Convert dirlock to a mutex
2009-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging/vt66*: kconfig, depends on WLAN Staging: batman-adv: introduce missing kfree Staging: batman-adv: Add Kconfig dependancies on PROC_FS and PACKET. Staging: panel: Adjust range for PANEL_KEYPAD in Kconfig Staging: panel: Fix compilation error with custom lcd charset Staging: ramzswap: remove ARM specific d-cache hack Staging: rtl8192x: fix printk formats Staging: wlan-ng: fix Correct size given to memset staging: rtl8192su: add USB VID/PID for HWNUm-300 staging: fix rtl8192su compilation errors with mac80211 staging: fix rtl8192e compilation errors with mac80211 Staging: fix rtl8187se compilation errors with mac80211 Staging: rtl8192su: fix test for negative error in rtl8192_rx_isr() Staging: comedi: jr3_pci: Don't ioremap too much space. Check result. Staging: comedi: removed "depricated" from COMEDI_CB_BLOCK Staging: comedi: usbdux.c: fix locking up of the driver when the comedi ringbuffer runs empty Staging: dst: remove from the tree Staging: sm7xx: add a new framebuffer driver Staging: batman: fix debug Kconfig option
2009-12-23Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Set i_nlink properly during reflink. ocfs2: Add reflinked file's inode to inode hash eariler. ocfs2: refcounttree.c cleanup. ocfs2: Find proper end cpos for a leaf refcount block.
2009-12-23USB: Fix a bug on appledisplay.c regarding signednesspancho horrillo
brightness status is reported by the Apple Cinema Displays as an 'unsigned char' (u8) value, but the code used 'char' instead. Note that he driver was developed on the PowerPC architecture, where the two types are synonymous, which is not always the case. Fixed that. Otherwise the driver will interpret brightness levels > 127 as negative, and fail to load. Signed-off-by: pancho horrillo <pancho@pancho.name> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: option: support hi speed for modem Haier CE100Donny Kurnia
I made this patch for usbserial driver to add the support for EVDO modem Haier CE100. The bugs report for this is here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/490068 This patch based on these post: http://blankblondtank.wordpress.com/2009/09/04/mengoptimalkan-koneksi-modem-haier-ce-100-cdma-di-linux/ http://tantos.web.id/blogs/how-to-internet-connection-using-cdma-evdo-modem-and-karmic-koala-ubuntu-9-10 I hope this patch can help other that have the Haier C100 modem, mostly in my country, Indonesia. Signed-off-by: Donny Kurnia <donnykurnia@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: audio gadget: free alsa devices when unloadingCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: audio gadget: fix wTotalLength calculationCliff Cai
The wTotalLength should contain the sum of the interface and unit descriptor sizes per the Audio Device Class specification 1.0. Reported-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23usb: otg: isp1301_omap: fix compile errorFelipe Balbi
commit 91c8a5a9985d5bf9c55f6f82f183f57b050b2a3a broke compilation of this driver after it introduced otg_init() as a static inline in <linux/usb/otg.h> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: workaround Blackfin FIFO anomaliesBryan Wu
Some of these workarounds are already in place, but labeled as affecting all BF52x parts. Since we have official anomaly numbers now, use those defines. And since writing to the FIFO has a similar hang issue as reading from the FIFO, implement the workaround there too when necessary. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: Fix array index out of bounds issueMaulik Mankad
This patch fixes the below array index out of bounds issue. Buffer overflow, array index of 'aInfo' may be out of bounds. Array 'aInfo' of size 78 may use index value(s) 6..84 The data stored in 'aInfo' array exceeds the array size of 78. This patch increases the size of this array to hold the string correctly without any memory corruption. This issue was reported by Klockwork tool. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: Fix null pointer dereference issueMaulik Mankad
This patch fixes the following NULL pointer dereference issue. Pointer 'request' returned from call to function 'next_request' at line 748 may be NULL and may be dereferenced at line 792. ============ Code Snippet ============ 748: request = next_request(musb_ep); 785: if (dma && (csr & MUSB_RXCSR_DMAENAB)) { csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB | MUSB_RXCSR_DMAMODE); musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_P_WZC_BITS | csr); 792: request->actual += musb_ep->dma->actual_len; Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: correct DMA address for txCliff Cai
Since a DMA transfer may need to be kicked off several times to complete, the DMA start must include the length that has already been transferred. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: gadget_ep0: avoid SetupEnd interruptSergei Shtylyov
Gadget stalling a zero-length SETUP request results in this error message: SetupEnd came in a wrong ep0stage idle In order to avoid it, always set the CSR0.DataEnd bit after detecting a zero- length request. Add the missing '\n' to the error message itself as well... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Cc: stable <stable@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabledSwaminathan S
Race condition exists between the cppi_interrupt handler and davinci_interrupt handler w.r.t completing a TX IO. Since DM646x has seperate DMA and USB endpoint interrupts cppi_interrupt handler needs to hold the lock while operating on the endpoint. Update over previous patch to avoid taking the lock if already taken. Tested on DM644x, DM355 and DM646x platforms. Signed-off-by: Swaminathan S <swami.iyer@ti.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: do not work if no gadget driver is loadedFelipe Balbi
On OTG and gadget-only configurations, we need a gadget driver in order to work properly, so avoid changing operation modes when there's no gadget driver loaded. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: gadget: set otg tranceiver to idle when registering gadgetArnaud Mandy
When registering gadget driver, the state of the transceiver must be set from undefined (no gadget) to b_idle. Module unload sets the transceiver state to undefined state. After the first load/unload pair, the reset irq will be lost. Signed-off-by: Arnaud Mandy <ext-arnaud.2.mandy@nokia.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: Populate the VBUS GPIO with the correct GPIO numberSwaminathan S
This fixes a null-pointer dereference bug. Signed-off-by: Swaminathan S <swami.iyer@ti.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: MAINTAINERS: Fix my tree's addressFelipe Balbi
The tree is now on a new address. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: fix compiling warning with min() macroCliff Cai
Current musb gadget dma code produces the warning: drivers/usb/musb/musb_gadget.c: In function 'txstate': drivers/usb/musb/musb_gadget.c:312: warning: comparison of distinct pointer types lacks a cast So switch to min_t(size_t, ...). Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: move musb_remove to __exitFelipe Balbi
probe() already was on __init, so moving remove() to __exit. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb_gadget: fix kernel oops in txstate()Sergei Shtylyov
Commit 7723de7e19b744144975a09c81777ec0f14ac5b3 (USB: musb_gadget: remove pointless loop) included uncalled for (and incorrect) optimization that might cause a kernel oops in txstate() -- undo it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h headerAndreas Mohr
This is a (almost) sort-only patch to sort FTDI device product ID definitions in new ftdi_sio_ids.h header. Advantage is that new device ID submissions will now have a specific (sorted) position - less future merge conflicts. Compile-tested, based on _current_ mainline git. Minor checkpatch.pl warnings were eliminated whereever it made sense, very minor text changes. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h headerAndreas Mohr
This is a strictly move-only patch to relocate all FTDI device product ID definitions to their own ftdi_sio_ids.h header (following the usual *_ids.h kernel tree convention, too), thus correcting the slightly too messy appearance (crucial driver defines were stuck somewhere in the decaying middle swamp of the huge existing header). Compile-tested, based on latest mainline git. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB core: fix recent kernel-doc warningsRandy Dunlap
Fix new kernel-doc warnings in usb core: Warning(drivers/usb/core/usb.c:79): No description found for parameter 'config' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'iface_num' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'alt_num' Warning(drivers/usb/core/hcd.c:1622): No description found for parameter 'udev' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: add device ID for Apple Cinema Display 23in 2007pancho horrillo
Hi! $ lsusb -v Bus 001 Device 008: ID 05ac:921c Apple, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x05ac Apple, Inc. idProduct 0x921c bcdDevice 1.15 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 92 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 16 Signed-off-by: pancho horrillo <pancho@pancho.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: fix section mismatch in early ehci dbgpJan Beulich
Commit 917778267fbe67703ab7d5c6f0b7a05d4c3df485 removed __init from ehci_wait_for_port(), but left it in place on ehci_reset_port(), which is being called from the former function. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: emi62: fix crash when trying to load EMI 6|2 firmwareClemens Ladisch
While converting emi62 to use request_firmware(), the driver was also changed to use the ihex helper functions. However, this broke the loading of the FPGA firmware because the code tries to access the addr field of the EOF record which works with a plain array that has an empty last record but not with the ihex helper functions where the end of the data is signaled with a NULL record pointer, resulting in: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<f80d248c>] emi62_load_firmware+0x33c/0x740 [emi62] This can be fixed by changing the loop condition to test the return value of ihex_next_binrec() directly (like in emi26.c). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-and-tested-by: Der Mickster <retroeffective@gmail.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: serial: Extra device/vendor ID for mos7840 driverBlaise Gassend
Signed-off-by: Blaise Gassend <blaise.gasend_linux@m4x.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: Fix double-linking of drivers/usb/otg when ULPI is selectedBill Gatliff
This patch corrects a problem where drivers/usb/otg is linked twice if CONFIG_USB_ULPI is selected, resulting in a build error (symbol conflict). The files in that directory are properly linked already as part of CONFIG_USB, and need not be indicated specifically for CONFIG_USB_ULPI. Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-19 03:14:53 +0000