summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-04-04Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: twl4030-madc-hwmon: add "platform:" prefix for platform modalias
2011-04-04ntp: fix non privileged system time shiftingRichard Cochran
The ADJ_SETOFFSET bit added in commit 094aa188 ("ntp: Add ADJ_SETOFFSET mode bit") also introduced a way for any user to change the system time. Sneaky or buggy calls to adjtimex() could set ADJ_OFFSET_SS_READ | ADJ_SETOFFSET which would result in a successful call to timekeeping_inject_offset(). This patch fixes the issue by adding the capability check. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04rtc-mrst: Fix section typesMajor Lee
Fix the following section mismatch warning. WARNING: drivers/rtc/built-in.o(.data+0xa0): Section mismatch in reference from the variable vrtc_mrst_platform_driver to the function .init.text:vrtc_mrst_platform_probe() The variable vrtc_mrst_platform_driver references the function __init vrtc_mrst_platform_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Major Lee <major_lee@wistron.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04netfilter: xt_conntrack: fix inverted conntrack direction testFlorian Westphal
--ctdir ORIGINAL matches REPLY packets, and vv: userspace sets "invert_flags &= ~XT_CONNTRACK_DIRECTION" in ORIGINAL case. Thus: (CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL) ^ !!(info->invert_flags & XT_CONNTRACK_DIRECTION)) yields "1 ^ 0", which is true -> returns false. Reproducer: iptables -I OUTPUT 1 -p tcp --syn -m conntrack --ctdir ORIGINAL Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-04-04netfilter: xt_addrtype: replace rt6_lookup with nf_afinfo->routeFlorian Westphal
This avoids pulling in the ipv6 module when using (ipv4-only) iptables -m addrtype. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-04-04netfilter: af_info: add 'strict' parameter to limit lookup to .oifFlorian Westphal
ipv6 fib lookup can set RT6_LOOKUP_F_IFACE flag to restrict search to an interface, but this flag cannot be set via struct flowi. Also, it cannot be set via ip6_route_output: this function uses the passed sock struct to determine if this flag is required (by testing for nonzero sk_bound_dev_if). Work around this by passing in an artificial struct sk in case 'strict' argument is true. This is required to replace the rt6_lookup call in xt_addrtype.c with nf_afinfo->route(). Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-04-04x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 changeTejun Heo
Commit d8fc3afc49 (x86, NUMA: Move *_numa_init() invocations into initmem_init()) moved acpi_numa_init() call into NUMA initmem_init() but forgot to update 32bit NUMA init breaking ACPI NUMA configuration for 32bit. acpi_numa_init() call was later moved again to srat_64.c. Match it by adding the call to get_memcfg_from_srat() in srat_32.c. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: H. Peter Anvin <hpa@linux.intel.com> LKML-Reference: <20110404100645.GE1420@mtj.dyndns.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-04netfilter: af_info: add network namespace parameter to route hookFlorian Westphal
This is required to eventually replace the rt6_lookup call in xt_addrtype.c with nf_afinfo->route(). Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-04-04x86: visws: Fixup irq overhaul falloutThomas Gleixner
Reported-by: Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-04edac/mpc85xx: Limit setting/clearing of HID1[RFXE] to e500v1/v2 coresKumar Gala
Only the e500v1/v2 cores have HID1[RXFE] so we should attempt to set or clear this register bit on them. Otherwise we get crashes like: NIP: c0579f84 LR: c006d550 CTR: c0579f84 REGS: ef857ec0 TRAP: 0700 Not tainted (2.6.38.2-00072-gf15ba3c) MSR: 00021002 <ME,CE> CR: 22044022 XER: 00000000 TASK = ef8559c0[1] 'swapper' THREAD: ef856000 CPU: 0 GPR00: c006d538 ef857f70 ef8559c0 00000000 00000004 00000000 00000000 00000000 GPR08: c0590000 c30170a8 00000000 c30170a8 00000001 0fffe000 00000000 00000000 GPR16: 00000000 7ffa0e60 00000000 00000000 7ffb0bd8 7ff3b844 c05be000 00000000 GPR24: 00000000 00000000 c05c28b0 c0579fac 00000000 00029002 00000000 c0579f84 NIP [c0579f84] mpc85xx_mc_clear_rfxe+0x0/0x28 LR [c006d550] on_each_cpu+0x34/0x50 Call Trace: [ef857f70] [c006d538] on_each_cpu+0x1c/0x50 (unreliable) [ef857f90] [c057a070] mpc85xx_mc_init+0xc4/0xdc [ef857fa0] [c0001cd4] do_one_initcall+0x34/0x1a8 [ef857fd0] [c055d9d8] kernel_init+0x17c/0x218 [ef857ff0] [c000cda4] kernel_thread+0x4c/0x68 Instruction dump: 40be0018 3c60c052 3863c70c 4be9baad 3be0ffed 4bd7c99d 80010014 7fe3fb78 83e1000c 38210010 7c0803a6 4e800020 <7c11faa6> 54290024 81290008 3d60c06e Oops: Exception in kernel mode, sig: 4 [#2] ---[ end trace 49ff3b8f93efde1a ]--- Also use the HID1_RFXE define rather than a magic number. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-04powerpc/85xx: Update dts for PCIe memory maps to match u-boot of Px020RDBPrabhakar Kushwaha
PCIe memory address space is 1:1 mapped with u-boot. Update dts of Px020RDB i.e. P1020RDB and P2020RDB to match the address map changes in u-boot. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-04IPVS: fix NULL ptr dereference in ip_vs_ctl.c ip_vs_genl_dump_daemons()Hans Schillstrom
ipvsadm -ln --daemon will trigger a Null pointer exception because ip_vs_genl_dump_daemons() uses skb_net() instead of skb_sknet(). To prevent others from NULL ptr a check is made in ip_vs.h skb_net(). Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-04-04netfilter: h323: bug in parsing of ASN1 SEQOF fieldDavid Sterba
Static analyzer of clang found a dead store which appears to be a bug in reading count of items in SEQOF field, only the lower byte of word is stored. This may lead to corrupted read and communication shutdown. The bug has been in the module since it's first inclusion into linux kernel. [Patrick: the bug is real, but without practical consequence since the largest amount of sequence-of members we parse is 30.] Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-04-04netfilter: ipset: references are protected by rwlock instead of mutexJozsef Kadlecsik
The timeout variant of the list:set type must reference the member sets. However, its garbage collector runs at timer interrupt so the mutex protection of the references is a no go. Therefore the reference protection is converted to rwlock. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-04-04netfilter: ipset: list:set timeout variant fixesJozsef Kadlecsik
- the timeout value was actually not set - the garbage collector was broken The variant is fixed, the tests to the ipset testsuite are added. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-04-04[S390] compile fix for latest binutilsMartin Schwidefsky
The latest binutils won't accept the stfl instruction with march=g5 which is the correct behaviour. Unfortunately head.S is assembled with -march=g5 even if the target cpu is z900 or later. To get 31-bit kernels compiled again the easiest fix is to use the .insn notation for the stfl instruction in head.S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-04[S390] cio: prevent purging of CCW devices in the online statePeter Oberparleiter
The cio_ignore purge function is intended to only remove CCW devices which are in the offline state. There is a time frame after the purge function finished where a CCW device is scheduled for removal but still accessible. When the device is set online during this time frame, it may first appear online before it is then removed. Fix this by preventing that CCW devices can be set online while there is work (such as removal triggered by the purge function) for it pending. Also ensure that the purge function does not schedule devices for removal which are in the process of being set online. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-04[S390] qdio: fix init sequenceSebastian Ott
Reorder the initialization sequence of the qdio module to avoid writing to an uninitialized debug feature entry. Also reorder the exit function to restore a consistent cleanup path. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-04[S390] Fix parameter passing for smp_switch_to_cpu()Michael Holzheu
After the execution has been switched to the destination CPU, the target function is called with the wrong parameter. According to the C calling convention on s390, the first parameter should be loaded into register 2. Currently in smp_restart_cpu() it is stored in register 3. To fix this, we load the parameter into the correct register 2. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-04[S390] oprofile s390: prevent stack corruptionJan Glauber
Prevent stack corruption by memcpy which copies more bytes then available at the destination. While at it use the new test_facility to test for the facility bit. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-03mlx4: fix kfree on error path in new_steering_entry()Mariusz Kozlowski
On error path kfree() should get pointer to memory allocated by kmalloc() not the address of variable holding it (which is on stack). Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04drm/radeon/kms: pageflipping cleanup for avivo+Alex Deucher
Avoid touching the flip setup regs while acceleration is running. Set them at modeset rather than during pageflip. Touching these regs while acceleration is active caused hangs on pre-avivo chips. These chips do not seem to be affected, but better safe than sorry, plus it avoids repeatedly reprogramming the regs every flip. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-04drm/radeon/kms: Add support for tv-out dongle on G5 9600Alex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-03ASoC: format_register_str: Don't clip register valuesStephen Warren
wordsize is used as the textual width of a register address. regsize is used as the textual width of a register value. The assignments to these values were swapped. In the case of WM8903, which has 8-bit register addresses and 16-bit register values, this caused the register values to be clipped to 2 digits instead of the full 4. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-03Merge branch 'for-2.6.39' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.39
2011-04-03ASoC: PXA: Fix oops in __pxa2xx_pcm_prepareVasily Khoruzhick
pxa2xx_pcm_hw_free frees dma channel and sets prtd->dma_ch to -1, but does not set prtd->params to NULL, so if pxa2xx_pcm_hw_params will be called immediately, it leaves prtd->dma_ch initialized with -1, and it results in oops in __pxa2xx_pcm_prepare. This bug is triggered via SDL. This patch adds check for prtd->dma_ch to __pxa2xx_pcm_prepare and cleans prtd->params, so now it works properly. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-02Input: rpckbd - fix a leak of the IRQ during init failureAxel Lin
In rpckbd_open prror path, free_irq() was using NULL rather than the driver data as the data pointer so free_irq() wouldn't have matched. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-02genirq: Fix cpumask leak in __setup_irq()Xiaotian Feng
The allocated cpumask should be freed in __setup_irq(). Signed-off-by: Xiaotian Feng <dfeng@redhat.com> LKML-Reference: <1301744375-6812-1-git-send-email-dfeng@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-02ARM: Only allow PM_SLEEP with CPUs which support suspendRussell King
Offering CONFIG_PM_SLEEP for CPUs which do not support suspend leads to build errors, so only set CONFIG_ARCH_SUSPEND_POSSIBLE if we have a CPU selected which supports suspend. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-02ARM: Make consolidated PM sleep code depend on PM_SLEEPRussell King
CONFIG_PM is now set whenever we support either runtime PM in addition to suspend and hibernate. This causes build errors when runtime PM is enabled on a platform, but the CPU does not have the appropriate support for suspend. So, switch this code to use CONFIG_PM_SLEEP rather than CONFIG_PM to allow runtime PM to be enabled without causing build errors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-02unicore32 framebuffer fix: get videomemory by __get_free_pages() and make it ↵Guan Xuetao
floatable 1. get videomemory by __get_free_pages() in fb-puv3.c 2. remove resource reservation for old fixed UNIGFX_MMAP & UVC_MMAP space 3. remove unused macros: PKUNTIY_UNIGFX_MMAP_BASE, PKUNITY_UNIGFX_MMAP_SIZE, PKUNITY_UVC_MMAP_BASE, PKUNITY_UVC_MMAP_SIZE and KUSER_UNIGFX_BASE 4. remove unused header linux/vmalloc.h in fb-puv3.h Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-04-02unicore32 core architecture: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in arch/unicore32/kernel/traps.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-04-02unicore32 rtc driver fix: cleanup irq_set_freq and irq_set_stateGuan Xuetao
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-04-02unicore32 fix: remove arch-specific futex supportGuan Xuetao
The futex functions in unicore32 are not used and verified, so just replaced by asm-generic version. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-04-02unicore32 ldscript fix: add cacheline parameter to PERCPU() macroGuan Xuetao
Also, adjust cacheline parameter of RW_DATA_SECTION and EXCEPTION_TABLE Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-04-01tcp: len check is unnecessarily devastating, change to WARN_ONIlpo Järvinen
All callers are prepared for alloc failures anyway, so this error can safely be boomeranged to the callers domain without super bad consequences. ...At worst the connection might go into a state where each RTO tries to (unsuccessfully) re-fragment with such a mis-sized value and eventually dies. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01sctp: malloc enough room for asconf-ack chunkWei Yongjun
Sometime the ASCONF_ACK parameters can equal to the fourfold of ASCONF parameters, this only happend in some special case: ASCONF parameter is : Unrecognized Parameter (4 bytes) ASCONF_ACK parameter should be: Error Cause Indication parameter (8 bytes header) + Error Cause (4 bytes header) + Unrecognized Parameter (4bytes) Four 4bytes Unrecognized Parameters in ASCONF chunk will cause panic. Pid: 0, comm: swapper Not tainted 2.6.38-next+ #22 Bochs Bochs EIP: 0060:[<c0717eae>] EFLAGS: 00010246 CPU: 0 EIP is at skb_put+0x60/0x70 EAX: 00000077 EBX: c09060e2 ECX: dec1dc30 EDX: c09469c0 ESI: 00000000 EDI: de3c8d40 EBP: dec1dc58 ESP: dec1dc2c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=dec1c000 task=c09aef20 task.ti=c0980000) Stack: c09469c0 e1894fa4 00000044 00000004 de3c8d00 de3c8d00 de3c8d44 de3c8d40 c09060e2 de25dd80 de3c8d40 dec1dc7c e1894fa4 dec1dcb0 00000040 00000004 00000000 00000800 00000004 00000004 dec1dce0 e1895a2b dec1dcb4 de25d960 Call Trace: [<e1894fa4>] ? sctp_addto_chunk+0x4e/0x89 [sctp] [<e1894fa4>] sctp_addto_chunk+0x4e/0x89 [sctp] [<e1895a2b>] sctp_process_asconf+0x32f/0x3d1 [sctp] [<e188d554>] sctp_sf_do_asconf+0xf8/0x173 [sctp] [<e1890b02>] sctp_do_sm+0xb8/0x159 [sctp] [<e18a2248>] ? sctp_cname+0x0/0x52 [sctp] [<e189392d>] sctp_assoc_bh_rcv+0xac/0xe3 [sctp] [<e1897d76>] sctp_inq_push+0x2d/0x30 [sctp] [<e18a21b2>] sctp_rcv+0x7a7/0x83d [sctp] [<c077a95c>] ? ipv4_confirm+0x118/0x125 [<c073a970>] ? nf_iterate+0x34/0x62 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747992>] ip_local_deliver_finish+0xf5/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747ab3>] ip_local_deliver+0x3e/0x44 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074775c>] ip_rcv_finish+0x29f/0x2c7 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747cae>] ip_rcv+0x1f5/0x233 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c071dce3>] __netif_receive_skb+0x310/0x336 [<c07221f3>] netif_receive_skb+0x4b/0x51 [<e0a4ed3d>] cp_rx_poll+0x1e7/0x29c [8139cp] [<c072275e>] net_rx_action+0x65/0x13a [<c0445a54>] __do_softirq+0xa1/0x149 [<c04459b3>] ? __do_softirq+0x0/0x149 <IRQ> [<c0445891>] ? irq_exit+0x37/0x72 [<c040a7e9>] ? do_IRQ+0x81/0x95 [<c07b3670>] ? common_interrupt+0x30/0x38 [<c0428058>] ? native_safe_halt+0xa/0xc [<c040f5d7>] ? default_idle+0x58/0x92 [<c0408fb0>] ? cpu_idle+0x96/0xb2 [<c0797989>] ? rest_init+0x5d/0x5f [<c09fd90c>] ? start_kernel+0x34b/0x350 [<c09fd0cb>] ? i386_start_kernel+0xba/0xc1 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01sctp: fix auth_hmacs field's length of struct sctp_cookieWei Yongjun
auth_hmacs field of struct sctp_cookie is used for store Requested HMAC Algorithm Parameter, and each HMAC Identifier is 2 bytes, so the length should be: SCTP_AUTH_NUM_HMACS * sizeof(__u16) + 2 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01net: Fix dev dev_ethtool_get_rx_csum() for forced NETIF_F_RXCSUMMichał Mirosław
dev_ethtool_get_rx_csum() won't report rx checksumming when it's not changeable and driver is converted to hw_features and friends. Fix this. (dev->hw_features & NETIF_F_RXCSUM) check is dropped - if the ethtool_ops->get_rx_csum is set, then driver is not coverted, yet. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01usbnet: use eth%d name for known ethernet devicesArnd Bergmann
The documentation for the USB ethernet devices suggests that only some devices are supposed to use usb0 as the network interface name instead of eth0. The logic used there, and documented in Kconfig for CDC is that eth0 will be used when the mac address is a globally assigned one, but usb0 is used for the locally managed range that is typically used on point-to-point links. Unfortunately, this has caused a lot of pain on the smsc95xx device that is used on the popular pandaboard without an EEPROM to store the MAC address, which causes the driver to call random_ether_address(). Obviously, there should be a proper MAC addressed assigned to the device, and discussions are ongoing about how to solve this, but this patch at least makes sure that the default interface naming gets a little saner and matches what the user can expect based on the documentation, including for new devices. The approach taken here is to flag whether a device might be a point-to-point link with the new FLAG_POINTTOPOINT setting in the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one of the two. The usbnet framework only looks at the MAC address for device naming if both flags are set, otherwise it trusts the flag. Signed-off-by: Arnd Bergmann <arnd.bergmann@linaro.org> Tested-by: Andy Green <andy.green@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01starfire: clean up dma_addr_t size testFUJITA Tomonori
Now we have CONFIG_ARCH_DMA_ADDR_T_64BIT. We can fix the hacky dma_addr_t size test cleanly. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-04-01arm: tegra: fix error check in tegra2_clocks.cNicolas Kaiser
Checking 'rate < 0' doesn't work because 'rate' is unsigned. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-04-01Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix build warning: argument 1 of 'irqd_irq_disabled'
2011-04-01Merge branch 'rcu/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/urgent
2011-04-01msi-laptop: fix config-dependent build errorRandy Dunlap
The msi-laptop driver uses input_*() and sparse_keymap_*() interfaces. It should depend on the INPUT subsystem being present and select INPUT_SPARSEKMAP so that those interfaces are present. ERROR: "input_free_device" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "input_register_device" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "sparse_keymap_setup" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "input_allocate_device" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "sparse_keymap_report_event" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "input_unregister_device" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "sparse_keymap_free" [drivers/platform/x86/msi-laptop.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: "Lee, Chun-Yi" <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-04-01eeepc-wmi: add keys found on EeePC 1215TCorentin Chary
Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-04-01asus-wmi: swap input name and physCorentin Chary
Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-04-01asus-laptop: remove removed features from feature-removal-schedule.txtCorentin Chary
commit 3b81cf9d558c57406b4ed9b0d2639113d1d428b6 removed those features. Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-04-01[IA64] fix build warning: argument 1 of 'irqd_irq_disabled'Tony Luck
In commit f5e5bf088bd3d30990efb7429aaf9f1e5134ffd6 ia64: Use irqd_irq_disabled() instead of desc->status access Thomas forgot to convert from irq to *irq_data. Add a call to irq_get_irq_data() to fix that. Signed-off-by: Tony Luck <tony.luck@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-07-01 07:51:13 +0000