summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-03-26xfs: xfs_trans_read_buf() should return an error on failureDave Chinner
When inside a transaction and we fail to read a buffer, xfs_trans_read_buf returns a null buffer pointer and no error. xfs_do_da_buf() checks the error return, but not the buffer, and as a result this read failure condition causes a panic when it attempts to dereference the non-existant buffer. Make xfs_trans_read_buf() return the same error for this situation regardless of whether it is in a transaction or not. This means every caller does not need to check both the error return and the buffer before proceeding to use the buffer. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com>
2011-03-26xfs: introduce inode cluster buffer trylocks for xfs_iflushDave Chinner
There is an ABBA deadlock between synchronous inode flushing in xfs_reclaim_inode and xfs_icluster_free. xfs_icluster_free locks the buffer, then takes inode ilocks, whilst synchronous reclaim takes the ilock followed by the buffer lock in xfs_iflush(). To avoid this deadlock, separate the inode cluster buffer locking semantics from the synchronous inode flush semantics, allowing callers to attempt to lock the buffer but still issue synchronous IO if it can get the buffer. This requires xfs_iflush() calls that currently use non-blocking semantics to pass SYNC_TRYLOCK rather than 0 as the flags parameter. This allows xfs_reclaim_inode to avoid the deadlock on the buffer lock and detect the failure so that it can drop the inode ilock and restart the reclaim attempt on the inode. This allows xfs_ifree_cluster to obtain the inode lock, mark the inode stale and release it and hence defuse the deadlock situation. It also has the pleasant side effect of avoiding IO in xfs_reclaim_inode when it tries to next reclaim the inode as it is now marked stale. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2011-03-26vmap: flush vmap aliases when mapping failsDave Chinner
On 32 bit systems, vmalloc space is limited and XFS can chew through it quickly as the vmalloc space is lazily freed. This can result in failure to map buffers, even when there is apparently large amounts of vmalloc space available. Hence, if we fail to map a buffer, purge the aliases that have not yet been freed to hopefuly free up enough vmalloc space to allow a retry to succeed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2011-03-26xfs: preallocation transactions do not need to be synchronousDave Chinner
Preallocation and hole punch transactions are currently synchronous and this is causing performance problems in some cases. The transactions don't need to be synchronous as we don't need to guarantee the preallocation is persistent on disk until a fdatasync, fsync, sync operation occurs. If the file is opened O_SYNC or O_DATASYNC, only then should the transaction be issued synchronously. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2011-03-25tile: Use generic show_interupts()Thomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Chris Metcalf <cmetcalf@tilera.com> LKML-Reference: <20110325142049.536190130@linutronix.de>
2011-03-25tile: Convert to new irq function namesThomas Gleixner
Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Chris Metcalf <cmetcalf@tilera.com> LKML-Reference: <20110325142049.441954268@linutronix.de>
2011-03-25kdb: add usage string of 'per_cpu' commandNamhyung Kim
Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-03-25kgdb,x86_64: fix compile warning found with sparseJason Wessel
Fix sparse warning: arch/x86/kernel/kgdb.c:123:9: warning: switch with no cases Reported-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-03-25kdb: code cleanup to use macro instead of valueJovi Zhang
It's better to use macro KDB_BASE_CMD_MAX instead of 50 Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-03-25kgdboc,kgdbts: strlen() doesn't count the terminatorDan Carpenter
This is an off by one because strlen() doesn't count the null terminator. We strcpy() these strings into an array of size MAX_CONFIG_LEN. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-03-25dma: Ipu: Convert interupt codeThomas Gleixner
Convert to the new irq chip functions and cleanup the name space. [ Guennadi reported: irq_data_get_chip_data is undefined. Yes, I screwed up. it needs to be irq_data_get_irq_chip_data ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Dan Williams <dan.j.williams@intel.com> LKML-Reference: <alpine.LFD.2.00.1103251220000.31464@localhost6.localdomain6>
2011-03-25Blackfin: bitops: fix include order after little endian inclusionMike Frysinger
The le.h header requires things like test_bit to be declared, so we need to move its inclusion to after the point where that happens. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-25Blackfin: defconfigs: update after misc devices defaulted to NMike Frysinger
The default value for misc devices was changed from Y to N which causes problems for mini defconfigs that were relying on this defaulting to Y. So update all of the defconfigs accordingly. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-25Blackfin: use more standard pr_fmt in the module loaderJoe Perches
Changed pr_fmt(fmt) to make the format arguments match the format. Changed an argument name in apply_relocate from me to mod so that the pr_err is consistent with the other uses. Added missing '\n' to a format. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-25docs: update the development process documentJonathan Corbet
Here's a set of changes updating Documentation/development-process. I have update kernel releases and relevant statistics, added information for a couple of tools, zapped some trailing white space, and generally tried to make it more closely match the current state of affairs. [Typo fixes from Joe Perches and Nicolas Kaiser incorporated] Signed-off-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Greg KH <greg@kroah.com> Cc: Randy Dunlap <rdunlap@xenotime.net>
2011-03-25ceph: flush msgr_wq during mds_client shutdownSage Weil
The release method for mds connections uses a backpointer to the mds_client, so we need to flush the workqueue of any pending work (and ceph_connection references) prior to freeing the mds_client. This fixes an oops easily triggered under UML by while true ; do mount ... ; umount ... ; done Also fix an outdated comment: the flush in ceph_destroy_client only flushes OSD connections out. This bug is basically an artifact of the ceph -> ceph+libceph conversion. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-25ALSA: Fix yet another race in disconnectionTakashi Iwai
This patch fixes a race between snd_card_file_remove() and snd_card_disconnect(). When the card is added to shutdown_files list in snd_card_disconnect(), but it's freed in snd_card_file_remove() at the same time, the shutdown_files list gets corrupted. The list member must be freed in snd_card_file_remove() as well. Reported-and-tested-by: Russ Dill <russ.dill@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-25MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 boardLars-Peter Clausen
The jz4740 nand driver now requires that the ecc offsets are set. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2058/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: JZ4740: qi_lb60: Add gpio-charger deviceLars-Peter Clausen
Register the gpio-charger device which reports whether device is currently charging or not. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2059/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: Wire up syncfs(2).Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: Hook up name_to_handle_at, open_by_handle_at and clock_adjtime syscalls.David Daney
These system calls we recently added. 32-bit ABIs need compat handling for sys_clock_adjtime(). o32 also needs compat handling for sys_open_by_handle_at(); Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2165/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: VR41xx: Convert to new irq_chip functionsThomas Gleixner
And cleanup direct access to irq_desc[]. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2208/ Patchwork: https://patchwork.linux-mips.org/patch/2209/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: TXx9: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: SNI: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2206/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: Sibyte: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2205/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: IP32: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2204/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: IP27: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2203/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: IP22/IP28: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2202/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: RB532: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2201/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: PowerTV: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2200/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: PNX8550: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2199/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: PNX83xx: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2198/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: msp71xx: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2197/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: Loongson: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: Use generic show_interrupts()Thomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2195/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: SMTC: Cleanup the hook mess and use irq_dataThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2194/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: SMTC: Use irq_data in smtc_forward_irq()Thomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2193/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: TXx9: Convert core to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2192/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: irq_cpu: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2191/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: RM9000: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2190/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: rm7000: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2189/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: MSC01: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2188/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: GT641xx: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2187/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: GIC: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2186/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: i8259: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2185/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: LASAt: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2184/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: JZ4740: Cleanup the mechanical irq_chip conversion Lars-Peter Clausen
The conversion did not make use of the new chip flag which signals the core code to mask the chip before calling the set_type callback. Sigh. Use the new lockdep helper as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2183/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: JZ4740: GPIO: Use shared irq chip for all gpiosLars-Peter Clausen
Currently there is one irq_chip per gpio_chip with the only difference being the name. Since the information whether the irq belong to GPIO bank A, B, C or D is not that important rewrite the code to simply use a single irq_chip for all gpio_chips. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2182/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: JZ4740: Convert to new irq functionsThomas Gleixner
Convert the JZ4740 intc and gpio irq chips to use newstyle irq functions. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2181/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25MIPS: JAZZ: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2180/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-07-06 07:32:59 +0000