summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-03-30V4L/DVB (11077): au0828: properly handle missing analog USB endpointDevin Heitmueller
Move the setup of the analog isoc handler into au0828-video.c, so it does not occur if there is not an .input section defined for the board. Also fixes a case where if there is an input section but the board does not actually have analog support, the digital support will continue to work as expected. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing sample hardware of various configurations to test with. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11076): au0828: make g_chip_ident call work properlyDevin Heitmueller
Make the g_chip_ident call work for the au0828/au8522. Discovered when testing with the v4l2_compliance tool Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> [mchehab@redhat.com: fix merge conflict, due to a path change for analog demod] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11075): au0828: make register debug lines easier to readDevin Heitmueller
Make it a little easier to read the debug messages for register read/write operations Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11074): au0828: fix i2c enumeration bugDevin Heitmueller
There was a bug where enumerating the i2c for devices would result in false positives. The root of the issue was the scanning was using SMBUS_QUICK messages, which are zero length write requests (which our i2c adapter implementation didn't handle). Because we never strobed any bytes onto the bus, the status register would still contain the value from the previous request. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11073): au0828: disable VBI code since it doesn't yet workDevin Heitmueller
Since the VBI support is not yet working for the au0828, don't advertise the capability or create the /dev/vbi device. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11072): au0828: advertise only NTSC-M (as opposed to all NTSC ↵Devin Heitmueller
standards) We don't now how to make any variant of NTSC work other than NTSC-M, so don't advertise that we support the other variants. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11071): tveeprom: add the xc5000 tuner to the tveeprom definitionDevin Heitmueller
Prior to now, we never relied on the Hauppauge tveeprom to identify which tuner is associated with the board. Now that the HVR-950q determines what the tuner is based on the eeprom, set the tuner ID appropriately. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing information on the tveeprom organization. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11070): au0828: Rework the way the analog video binding occursDevin Heitmueller
Rework the way boards are managed so that we can change the board description based on the Hauppauge eeprom (modeled after cx88-cards.c). Also, make sure that we don't load the analog stack if there are no analog inputs defined in the board profile. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing information on the various ways different Hauppauge boards can be configured. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11069): au8522: add mutex protecting use of hybrid stateDevin Heitmueller
Access using the hybrid state framework requires the list to be protected by a mutex. Thanks to Michael Krufky <mkrufky@linuxtv.org> for reporting this during a code review. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11068): au0828: add analog profile for the HVR-850Devin Heitmueller
Add the analog parameters to the device profile for the HVR-850 Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11067): au0828: workaround a bug in the au0828 i2c handlingDevin Heitmueller
There is an issue related to the i2c clock for addressing the xc5000. The au0828 chip does not support clock stretching, which the xc5000 makes use of. This results in cases where we silently get back garbage in i2c read operations. To work around this issue until we slow down the i2c clock when talking with that specific device. This was not an issue before we had analog support because we never needed to enumerate the i2c bus, and digital tuning never actually needed to perform read operations against the xc5000. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11066): au0828: add support for analog functionality in bridgeDevin Heitmueller
Add support for the analog functionality found in the au0828 bridge Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> [mchehab@redhat.com: fix compilation by adding linux/version.h] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11065): au8522: add support for analog side of demodulatorDevin Heitmueller
Add support for the analog functionality in the au8522 analog/digital demodulator Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> [mchehab: renamed drivers/media/video/au8522_decoder.c as drivers/media/dvb/frontends/au8522_decoder.c to avoid breaking bisect] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11064): au8522: make use of hybrid framework so analog/digital ↵Devin Heitmueller
demod can share state Make use of the hybrid tuner framework so the analog and digital parts of the au8522 demodulator can make use of the same shared state. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11063): au8522: power down the digital demod when not in useDevin Heitmueller
When the au8522 is idle, put the chip into a low power mode (reduces power consumption from 450ma to 346ma) Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11062): au8522: fix register read/write high bitsDevin Heitmueller
For the i2c messages to read and write registers, the two high order bits of the first byte dictates whether it is a read or a write operation. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11061): au8522: move shared state and common functions into a ↵Devin Heitmueller
separate header files Move the au8522 state structure, as well as exposing functions needed by the analog side of the demodulator into a common header file. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11060): au8522: rename the au8522.c source fileDevin Heitmueller
Rename the au8522.c file to au8522_dig.c so that more source files can be added to the driver while preserving the original name of au8522.ko Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11059): xc5000: fix bug for hybrid xc5000 devices with IF other ↵Devin Heitmueller
than 5380 The xc5000 driver has a bug where the IF is always set to whatever the first caller to dvb_attach() provides. This fails when the device requires an IF other than 5380 and the analog driver is loaded first through tuner-core (which always supplies the hard-coded value of 5380). Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11057): Fix CiMax stability in Netup Dual DVB-S2 CIAbylay Ospan
It appears TS discontinuity about one per 10 hrs if CAM used. Patch to fix it. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11056): Bug fix in NetUP: restore high address lines in CIAbylay Ospan
CI high address lines disappears due to wrong data type used. Patch to fix it. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11055): Fix typo in stv0900Igor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11054): Shorten some lines in stv0900 to less then 81 charactersIgor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11053): saa7134: set v4l2_dev field of video_deviceHans Verkuil
The v4l2_dev field of video_device wasn't initialized. The parent field is derived from v4l2_dev, so that doesn't need to be set anymore. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11052): bt819: remove an unused headerHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11051): v4l-dvb: replace remaining references to the old mailinglist.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11048): zoran: fix incorrect return type of notify function.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11047): cx88: convert to v4l2_device.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11046): bttv: convert to v4l2_device.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11045): v4l2: call v4l2_device_disconnect in USB drivers.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11044): v4l2-device: add v4l2_device_disconnectHans Verkuil
Call v4l2_device_disconnect when the parent of a hotpluggable device disconnects. This ensures that you do not have a pointer to a device that is no longer present. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11042): v4l2-api: Add definitions for V4L2_MPEG_STREAM_VBI_FMT_IVTV ↵Andy Walls
payloads This addition to the v4l2-api add definitions for the constants and data structures used for sliced VBI data insertion into MPEG streams triggered by V4L2_MPEG_STREAM_VBI_FMT_IVTV. This simply declares what the ivtv and cx18 drivers and MythTV have already been doing and provides a proper data structure definition to user space. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11040): gspca - most jpeg subdrivers: Have the JPEG quality settable.Jean-Francois Moine
The JPEG quality of the images (quantization tables) is now settable by the VIDIOC_S_JPEGCOMP ioctl. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11039): gspca - most jpeg subdrivers: Change the JPEG header creation.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11035): mt9t031 bugfixPhilippe Rétornaz
- The video device is not allocated when mt9t031_init() is called, don't use it in debug printk. - The clock polarity is inverted in mt9t031_set_bus_param(), use the correct one. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11034): soc-camera: remove now unused gpio member of struct ↵Sascha Hauer
soc_camera_link Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11033): mt9v022: allow setting of bus width from board codeSascha Hauer
This patch removes the phytec specific setting of the bus width and switches to the more generic query_bus_param/set_bus_param hooks Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11032): mt9m001: allow setting of bus width from board codeSascha Hauer
This patch removes the phytec specific setting of the bus width and switches to the more generic query_bus_param/set_bus_param hooks Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11031): pcm990 baseboard: add camera bus width switch settingSascha Hauer
Some Phytec cameras have a I2C GPIO expander which allows it to switch between different sensor bus widths. This was previously handled in the camera driver. Since handling of this switch varies on several boards the cameras are used on, the board support seems a better place to handle the switch Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11030): soc-camera: add board hook to specify the buswidth for ↵Sascha Hauer
camera sensors Camera sensors have a native bus width say support, but on some boards not all sensor data lines are connected to the image interface and thus support a different bus width than the sensors native one. Some boards even have a bus driver which dynamically switches between different bus widths with a GPIO. This patch adds a hook which board code can use to support different bus widths. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11029): video: use videobuf_waiton() in sh_mobile_ceu free_buffer()Magnus Damm
Make sure videobuf_waiton() is used before freeing a buffer. Without this fix we may return the buffer to the allocator before the bus mastering operation is finished. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Tested-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11028): ov772x: use soft sleep mode in stop_captureKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11027): soc-camera: configure drivers with a default format at ↵Guennadi Liakhovetski
probe time Currently soc-camera doesn't set up any image format without an explicit S_FMT. According to the API this should be supported, for example, capture-example.c from v4l2-apps by default doesn't issue an S_FMT. This patch moves negotiating of available host-camera format translations to probe() time, and restores the state from the last close() on the next open(). This is needed for some drivers, which power down or reset hardware after the last user closes the interface. This patch also has a nice side-effect of avoiding multiple allocation anf freeing of format translation tables. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11026): sh-mobile-ceu-camera: set field to the value, configured at ↵Guennadi Liakhovetski
open() For the case, that we have to capture with a default format, i.e., when the user doesn't call S_FMT, we have to use the field value according to the default, configured at open() time. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11025): soc-camera: configure drivers with a default format on openGuennadi Liakhovetski
Currently soc-camera doesn't set up any image format without an explicit S_FMT. It seems this should be supported, since, for example, capture-example.c from v4l2-apps by default doesn't issue an S_FMT. This patch configures a default image format on open(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11024): soc-camera: separate S_FMT and S_CROP operationsGuennadi Liakhovetski
As host and camera drivers become more complex, differences between S_FMT and S_CROP functionality grow, this patch separates them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11022): zoran/bt819: use new notify functionality.Hans Verkuil
Bt819 needs the parent driver to drive a GPIO pin low and high in order to reset its fifo. Use the new notify callback for this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11021): v4l2-device: add a notify callback.Hans Verkuil
Add a notify callback to v4l2_device to let sub-devices notify their parent of special events. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10988): v4l2-dev: use parent field if the v4l2_device has no parent ↵Hans Verkuil
set. Normally the parent device of v4l2_device is used as the video device node's parent. But if it was not set, then use the parent field in the video_device struct. This is needed in the cx88 driver, which has one core v4l2_device but creates multiple pci devices (one each for raw and mpeg video). So you cannot associate the core v4l2_device with a particular PCI device, but you can do that for each video_device. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10987): cx23885: fix crash on non-netup cardsHans Verkuil
The new support for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI board broke the existing boards. Interrupts for the netup part were enabled and handled without testing whether the current board actually had a netup -> instant and fatal crash. I've added tests to do this only for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI board. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 04:01:36 +0000