summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2015-02-27vhost: drop hard-coded num_buffers sizeMichael S. Tsirkin
The 2 that we use for copy_to_iter comes from sizeof(u16), it used to be that way before the iov iter update. Fix it up, making it obvious the size of stack access is right. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27vhost: cleanup iterator update logicMichael S. Tsirkin
Recent iterator-related changes in vhost made it harder to follow the logic fixing up the header. In fact, the fixup always happens at the same offset: sizeof(virtio_net_hdr): sometimes the fixup iterator is updated by copy_to_iter, sometimes-by iov_iter_advance. Rearrange code to make this obvious. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27rocker: silence shift wrapping warningDan Carpenter
"val" is declared as a u64 so static checkers complain that this shift can wrap. I don't have the hardware but probably it's doesn't have over 31 ports. Still we may as well silence the warning even if it's not a real bug. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27rocker: add a check for NULL in rocker_probe_ports()Dan Carpenter
Make sure kmalloc() succeeds. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27cxgb4: Fix PCI-E Memory window interface for big-endian systemsHariprasad Shenai
When doing reads and writes to adapter memory via the PCI-E Memory Window interface, data gets swizzled on 4-byte boundaries on Big-Endian systems because we need to account for the register read/write interface which incorporates a swizzle onto the Little-Endian PCI-E Bus. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27enic: do notify_check before returning creditsSujith Sankar
We should complete notify_check before returning the credits. Once we return the credits, adaptor may access the notify data. Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27Code of ConflictGreg Kroah-Hartman
This file provides a basic guide for how to handle conflict resolution when it comes up in the development process. Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Arjan van de Ven <arjanvandeven@gmail.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Chris Ball <chris@printf.net> Acked-by: Chris Mason <clm@fb.com> Acked-by: Chris Metcalf <cmetcalf@ezchip.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Fabio Estevam <festevam@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Grant Likely <grant.likely@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Hannes Reinecke <hare@suse.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Jens Axboe <axboe@kernel.dk> Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: John W. Linville <linville@tuxdriver.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: NeilBrown <neilb@suse.de> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Tony Luck <tony.luck@intel.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Willy Tarreau <w@1wt.eu> Acked-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-27arm64: cpuidle: add asm/proc-fns.h inclusionLorenzo Pieralisi
ARM64 CPUidle driver requires the cpu_do_idle function so that it can be used to enter the shallowest idle state, and it is declared in asm/proc-fns.h. The current ARM64 CPUidle driver does not include asm/proc-fns.h explicitly and it has so far relied on implicit inclusion from other header files. Owing to some header dependencies reshuffling this currently triggers build failures when CONFIG_ARM64_64K_PAGES=y: drivers/cpuidle/cpuidle-arm64.c: In function "arm64_enter_idle_state" drivers/cpuidle/cpuidle-arm64.c:42:3: error: implicit declaration of function "cpu_do_idle" [-Werror=implicit-function-declaration] cpu_do_idle(); ^ This patch adds the explicit inclusion of the asm/proc-fns.h header file in the arm64 asm/cpuidle.h header file, so that the build breakage is fixed and the required header inclusion is added to the appropriate arch back-end CPUidle header, already included by the CPUidle arm64 driver, where CPUidle arch related function declarations belong. Reported-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-27arm64: compat Fix siginfo_t -> compat_siginfo_t conversion on big endianCatalin Marinas
The native (64-bit) sigval_t union contains sival_int (32-bit) and sival_ptr (64-bit). When a compat application invokes a syscall that takes a sigval_t value (as part of a larger structure, e.g. compat_sys_mq_notify, compat_sys_timer_create), the compat_sigval_t union is converted to the native sigval_t with sival_int overlapping with either the least or the most significant half of sival_ptr, depending on endianness. When the corresponding signal is delivered to a compat application, on big endian the current (compat_uptr_t)sival_ptr cast always returns 0 since sival_int corresponds to the top part of sival_ptr. This patch fixes copy_siginfo_to_user32() so that sival_int is copied to the compat_siginfo_t structure. Cc: <stable@vger.kernel.org> Reported-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com> Tested-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-27arm64: Increase the swiotlb buffer size 64MBCatalin Marinas
With commit 3690951fc6d4 (arm64: Use swiotlb late initialisation), the swiotlb buffer size is limited to MAX_ORDER_NR_PAGES. However, there are platforms with 32-bit only devices that require bounce buffering via swiotlb. This patch changes the swiotlb initialisation to an early 64MB memblock allocation. In order to get the swiotlb buffer correctly allocated (via memblock_virt_alloc_low_nopanic), this patch also defines ARCH_LOW_ADDRESS_LIMIT to the maximum physical address capable of 32-bit DMA. Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-27ALSA: oxfw: fix a condition and return code in start_stream()Takashi Sakamoto
The amdtp_stream_wait_callback() doesn't return minus value and the return code is not for error code. This commit fixes with a propper condition and an error code. Fixes: f3699e2c7745 ('ALSA: oxfw: Change the way to start stream') Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-27USB: serial: cp210x: Adding Seletek device id'sMichiel vd Garde
These device ID's are not associated with the cp210x module currently, but should be. This patch allows the devices to operate upon connecting them to the usb bus as intended. Signed-off-by: Michiel van de Garde <mgparser@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-27ARC: Fix thread_saved_pc()Vineet Gupta
The old implementation assumed that SP at the time of __switch_to() is right above pt_regs which is almost certainly not the case as there will be some stack build up between entry into kernel and leading up to __switch_to Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-02-27ARC: Fix KSTK_ESP()Vineet Gupta
/proc/<pid>/maps currently don't annotate stack vma with "[stack]" This is because KSTK_ESP ie expected to return usermode SP of tsk while currently it returns the kernel mode SP of a sleeping tsk. While the fix is trivial, we also need to adjust the ARC kernel stack unwinder to not use KSTK_SP and friends any more. Cc: <stable@vger.kernel.org> Reported-and-suggested-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-02-27ARC: perf: Enable generic software eventsVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-02-27ARC: Make arc_unwind_core accessible externallyVineet Gupta
The arc unwinder can also be used for perf callchains. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-02-27Merge branch 'drm-atmel-hlcdc-fixes' of ↵Dave Airlie
git://github.com/bbrezillon/linux-at91 into drm-fixes minor atmel hclcdc fixes. * 'drm-atmel-hlcdc-fixes' of git://github.com/bbrezillon/linux-at91: drm: atmel-hlcdc: remove clock polarity from crtc driver drm: atmel-hlcdc: remove useless pm_runtime_put_sync in probe drm: atmel-hlcdc: reset layer A2Q and UPDATE bits when disabling it
2015-02-27Merge tag 'drm-intel-fixes-2015-02-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes First batch of fixes for v4.0-rc, plenty of cc: stable material. * tag 'drm-intel-fixes-2015-02-26' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix frontbuffer false positve. drm/i915: Align initial plane backing objects correctly drm/i915: avoid processing spurious/shared interrupts in low-power states drm/i915: Check obj->vma_list under the struct_mutex drm/i915: Fix a use after free, and unbalanced refcounting drm/i915: Dell Chromebook 11 has PWM backlight drm/i915/skl: handle all pixel formats in skylake_update_primary_plane() drm/i915/bdw: PCI IDs ending in 0xb are ULT.
2015-02-27Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes misc radeon fixes. * 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: only enable DP audio if the monitor supports it drm/radeon: fix atom aux payload size check for writes (v2) drm/radeon: fix 1 RB harvest config setup for TN/RL drm/radeon: enable SRBM timeout interrupt on EG/NI drm/radeon: enable SRBM timeout interrupt on SI drm/radeon: enable SRBM timeout interrupt on CIK v2 drm/radeon: dump full IB if we hit a packet error drm/radeon: disable mclk switching with 120hz+ monitors drm/radeon: use drm_mode_vrefresh() rather than mode->vrefresh drm/radeon: enable native backlight control on old macs
2015-02-26Merge tag 'hwmon-for-linus-v4.0-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Add missing return value check to ads7828 driver" * tag 'hwmon-for-linus-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ads7828) Check return value of devm_regmap_init_i2c
2015-02-26sunrpc: integer underflow in rsc_parse()Dan Carpenter
If we call groups_alloc() with invalid values then it's might lead to memory corruption. For example, with a negative value then we might not allocate enough for sizeof(struct group_info). (We're doing this in the caller for consistency with other callers of groups_alloc(). The other alternative might be to move the check out of all the callers into groups_alloc().) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Simo Sorce <simo@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-02-26nfsd: fix clp->cl_revoked list deletion causing softlock in nfsdAndrew Elble
commit 2d4a532d385f ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock") removed the use of the reaplist to clean out clp->cl_revoked. It failed to change list_entry() to walk clp->cl_revoked.next instead of reaplist.next Fixes: 2d4a532d385f ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock") Cc: stable@vger.kernel.org Reported-by: Eric Meddaugh <etmsys@rit.edu> Tested-by: Eric Meddaugh <etmsys@rit.edu> Signed-off-by: Andrew Elble <aweits@rit.edu> Reviewed-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-02-26mac80211: Send EAPOL frames at lowest rateJouni Malinen
The current minstrel_ht rate control behavior is somewhat optimistic in trying to find optimum TX rate. While this is usually fine for normal Data frames, there are cases where a more conservative set of retry parameters would be beneficial to make the connection more robust. EAPOL frames are critical to the authentication and especially the EAPOL-Key message 4/4 (the last message in the 4-way handshake) is important to get through to the AP. If that message is lost, the only recovery mechanism in many cases is to reassociate with the AP and start from scratch. This can often be avoided by trying to send the frame with more conservative rate and/or with more link layer retries. In most cases, minstrel_ht is currently using the initial EAPOL-Key frames for probing higher rates and this results in only five link layer transmission attempts (one at high(ish) MCS and four at MCS0). While this works with most APs, it looks like there are some deployed APs that may have issues with the EAPOL frames using HT MCS immediately after association. Similarly, there may be issues in cases where the signal strength or radio environment is not good enough to be able to get frames through even at couple of MCS 0 tries. The best approach for this would likely to be to reduce the TX rate for the last rate (3rd rate parameter in the set) to a low basic rate (say, 6 Mbps on 5 GHz and 2 or 5.5 Mbps on 2.4 GHz), but doing that cleanly requires some more effort. For now, we can start with a simple one-liner that forces the minimum rate to be used for EAPOL frames similarly how the TX rate is selected for the IEEE 802.11 Management frames. This does result in a small extra latency added to the cases where the AP would be able to receive the higher rate, but taken into account how small number of EAPOL frames are used, this is likely to be insignificant. A future optimization in the minstrel_ht design can also allow this patch to be reverted to get back to the more optimized initial TX rate. It should also be noted that many drivers that do not use minstrel as the rate control algorithm are already doing similar workarounds by forcing the lowest TX rate to be used for EAPOL frames. Cc: stable@vger.kernel.org Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-26Merge tag 'sound-4.0-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Most of changes in this pull request are about the fixes of crash of FireWire drivers at hot-unplugging. In addition, there are a few HD-audio fixes (removal of wrong static, a pin quirk for an ASUS mobo, a regression fix for runtime PM on Panther Point) and a long-standing (but fairly minor) bug of PCM core" * tag 'sound-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Disable runtime PM for Panther Point again ALSA: hda: controller code - do not export static functions ALSA: pcm: Don't leave PREPARED state after draining ALSA: fireworks/bebob/dice/oxfw: make it possible to shutdown safely ALSA: fireworks/bebob/dice/oxfw: allow stream destructor after releasing runtime ALSA: firewire-lib: remove reference counting ALSA: fireworks/bebob/dice/oxfw: add reference-counting for FireWire unit ALSA: hda - Add pin configs for ASUS mobo with IDT 92HD73XX codec ALSA: firewire-lib: fix an unexpected byte sequence for micro sign
2015-02-26arm64: Fix text patching logic when using fixmapMarc Zyngier
Patch 2f896d586610 ("arm64: use fixmap for text patching") changed the way we patch the kernel text, using a fixmap when the kernel or modules are flagged as read only. Unfortunately, a flaw in the logic makes it fall over when patching modules without CONFIG_DEBUG_SET_MODULE_RONX enabled: [...] [ 32.032636] Call trace: [ 32.032716] [<fffffe00003da0dc>] __copy_to_user+0x2c/0x60 [ 32.032837] [<fffffe0000099f08>] __aarch64_insn_write+0x94/0xf8 [ 32.033027] [<fffffe000009a0a0>] aarch64_insn_patch_text_nosync+0x18/0x58 [ 32.033200] [<fffffe000009c3ec>] ftrace_modify_code+0x58/0x84 [ 32.033363] [<fffffe000009c4e4>] ftrace_make_nop+0x3c/0x58 [ 32.033532] [<fffffe0000164420>] ftrace_process_locs+0x3d0/0x5c8 [ 32.033709] [<fffffe00001661cc>] ftrace_module_init+0x28/0x34 [ 32.033882] [<fffffe0000135148>] load_module+0xbb8/0xfc4 [ 32.034044] [<fffffe0000135714>] SyS_finit_module+0x94/0xc4 [...] This is triggered by the use of virt_to_page() on a module address, which ends to pointing to Nowhereland if you're lucky, or corrupt your precious data if not. This patch fixes the logic by mimicking what is done on arm: - If we're patching a module and CONFIG_DEBUG_SET_MODULE_RONX is set, use vmalloc_to_page(). - If we're patching the kernel and CONFIG_DEBUG_RODATA is set, use virt_to_page(). - Otherwise, use the provided address, as we can write to it directly. Tested on 4.0-rc1 as a KVM guest. Reported-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laura Abbott <lauraa@codeaurora.org> Tested-by: Richard W.M. Jones <rjones@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fix from Chris Mason: "I'm still testing more fixes, but I wanted to get out the fix for the btrfs raid5/6 memory corruption I mentioned in my merge window pull" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix allocation size calculations in alloc_btrfs_bio
2015-02-26arm64: crypto: increase AES interleave to 4xArd Biesheuvel
This patch increases the interleave factor for parallel AES modes to 4x. This improves performance on Cortex-A57 by ~35%. This is due to the 3-cycle latency of AES instructions on the A57's relatively deep pipeline (compared to Cortex-A53 where the AES instruction latency is only 2 cycles). At the same time, disable inline expansion of the core AES functions, as the performance benefit of this feature is negligible. Measured on AMD Seattle (using tcrypt.ko mode=500 sec=1): Baseline (2x interleave, inline expansion) ------------------------------------------ testing speed of async cbc(aes) (cbc-aes-ce) decryption test 4 (128 bit key, 8192 byte blocks): 95545 operations in 1 seconds test 14 (256 bit key, 8192 byte blocks): 68496 operations in 1 seconds This patch (4x interleave, no inline expansion) ----------------------------------------------- testing speed of async cbc(aes) (cbc-aes-ce) decryption test 4 (128 bit key, 8192 byte blocks): 124735 operations in 1 seconds test 14 (256 bit key, 8192 byte blocks): 92328 operations in 1 seconds Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: enable PTE type bit in the mask for pte_modifyFeng Kan
Caught during Trinity testing. The pte_modify does not allow modification for PTE type bit. This cause the test to hang the system. It is found that the PTE can't transit from an inaccessible page (b00) to a valid page (b11) because the mask does not allow it. This happens when a big block of mmaped memory is set the PROT_NONE, then the a small piece is broken off and set to PROT_WRITE | PROT_READ cause a huge page split. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: mm: remove unused functions and variable protoypesYingjoe Chen
The functions __cpu_flush_user_tlb_range and __cpu_flush_kern_tlb_range were removed in commit fa48e6f780 'arm64: mm: Optimise tlb flush logic where we have >4K granule'. Global variable cpu_tlb was never used in arm64. Remove them. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: psci: move psci firmware calls out of lineWill Deacon
An arm64 allmodconfig fails to build with GCC 5 due to __asmeq assertions in the PSCI firmware calling code firing due to mcount preambles breaking our assumptions about register allocation of function arguments: /tmp/ccDqJsJ6.s: Assembler messages: /tmp/ccDqJsJ6.s:60: Error: .err encountered /tmp/ccDqJsJ6.s:61: Error: .err encountered /tmp/ccDqJsJ6.s:62: Error: .err encountered /tmp/ccDqJsJ6.s:99: Error: .err encountered /tmp/ccDqJsJ6.s:100: Error: .err encountered /tmp/ccDqJsJ6.s:101: Error: .err encountered This patch fixes the issue by moving the PSCI calls out-of-line into their own assembly files, which are safe from the compiler's meddling fingers. Reported-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: vdso: minor ABI fix for clock_getresNathan Lynch
The vdso implementation of clock_getres currently returns 0 (success) whenever a null timespec is provided by the caller, regardless of the clock id supplied. This behavior is incorrect. It should fall back to syscall when an unrecognized clock id is passed, even when the timespec argument is null. This ensures that clock_getres always returns an error for invalid clock ids. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26USB: pl2303: disable break on shutdownJohan Hovold
Currently an enabled break state is not disabled on final close nor on re-open and has to be disabled manually. Fix this by disabling break on port shutdown. Reported-by: Jari Ruusu <jariruusu@users.sourceforge.net> Tested-by: Jari Ruusu <jariruusu@users.sourceforge.net> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: mxuport: fix null deref when used as a consoleJohan Hovold
Fix null-pointer dereference at probe when the device is used as a console, in which case the tty argument to open will be NULL. Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver") Cc: stable <stable@vger.kernel.org> # v3.14 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: clean up bus probe error handlingJohan Hovold
Clean up bus probe error handling by separating success and error paths. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: serial: fix port attribute-creation raceJohan Hovold
Fix attribute-creation race with userspace by using the port device groups field to create the port attributes. Also use %u when printing the port number, which is unsigned, even though we do not currently support more than 128 ports per device. Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: fix tty-device error handling at probeJohan Hovold
Add missing error handling when registering the tty device at port probe. This avoids trying to remove an uninitialised character device when the port device is removed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Takashi Iwai <tiwai@suse.de> Cc: stable <stable@vger.kernel.org> # v2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: fix potential use-after-free after failed probeJohan Hovold
Fix return value in probe error path, which could end up returning success (0) on errors. This could in turn lead to use-after-free or double free (e.g. in port_remove) when the port device is removed. Fixes: c706ebdfc895 ("USB: usb-serial: call port_probe and port_remove at the right times") Cc: stable <stable@vger.kernel.org> # v2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: console: add dummy __module_getJohan Hovold
Add call to __module_get when initialising the fake tty in usb_console_setup to match the module_put in release_one_tty. Note that the tty-driver (i.e. usb-serial core) must be compiled-in to enable the usb console so the __module_get is essentially a noop as driver->owner will be null. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: ftdi_sio: add PIDs for Actisense USB devicesMark Glover
These product identifiers (PID) all deal with marine NMEA format data used on motor boats and yachts. We supply the programmed devices to Chetco, for use inside their equipment. The PIDs are a direct copy of our Windows device drivers (FTDI drivers with altered PIDs). Signed-off-by: Mark Glover <mark@actisense.com> Cc: stable <stable@vger.kernel.org> [johan: edit commit message slightly ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26Revert "USB: serial: make bulk_out_size a lower limit"Johan Hovold
This reverts commit 5083fd7bdfe6760577235a724cf6dccae13652c2. A bulk-out size smaller than the end-point size is indeed valid. The offending commit broke the usb-debug driver for EHCI debug devices, which use 8-byte buffers. Fixes: 5083fd7bdfe6 ("USB: serial: make bulk_out_size a lower limit") Reported-by: "Li, Elvin" <elvin.li@intel.com> Cc: stable <stable@vger.kernel.org> # v3.15 Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26ARM: multi_v7_defconfig: Enable shmobile platformsGeert Uytterhoeven
Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-26drm: atmel-hlcdc: remove clock polarity from crtc driverNicolas Ferre
Remove this configuration bit in crtc driver as the rising edge clock is widely used. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-02-26i40e: check pointers before useShannon Nelson
Make sure we don't try to dereference NULL pointers when returning values from the AdminQ calls. Change-ID: Ia6694f2f415d50acf0aba063c863568742799aff Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: catch NVM write semaphore timeout and retryShannon Nelson
In some circumstances, a multi-write transaction takes longer than the default 3 minute timeout on the write semaphore. If the write failed with an EBUSY status, this is likely the problem, so here we try to reacquire the semaphore then retry the write. We only do one retry, then give up. Change-ID: I1c8be60688acc2f39573839579baf601207c4a36 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: stop flow director on shutdownMitch A Williams
In some cases, the hardware would continue to try to access the FDIR ring after entering D3Hot state, which would cause either PCIe errors or NMIs, depending upon system configuration. Explicitly stop FDIR in our shutdown routine to eliminate this possibility. Change-ID: I1bd9fc7fd8f151fe24cad132ac9adddab923e3af Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: disconnect irqs on shutdownShannon Nelson
Combine the ICR0 shutdown with the standard interrupt shutdown, and add the interrupt clearing to the PCI shutdown path. This prevents the driver from allowing stray interrupts or causing system logs from un-handled interrupts. Change-ID: I48f6ab95cad7f8ca77c1f26c92a51cc1034ced43 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40evf: TCP/IPv6 over Vxlan Tx checksum offload fixAnjali Singhai
We were checking the outer Protocol flags and deciding the flow for inner header. This patch fixes that. This fixes the Tx checksum offload for TCP/IPv6 over vxlan. Change-ID: I837aaea921d34f71b24c2bc32aaadea5001ddf78 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Issue a PF reset if Tx queue disable timeoutParikh, Neerav
As part of DCB reconfiguration flow if the Tx queue disable times out then issue a PF reset to do some level of recovery. Change-ID: I7550021c55bff355351c0365e61e1f05fcaff46d Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix the Tx ring qset handle when DCB reconfiguresParikh, Neerav
When DCB is reconfigured to single TC the driver did not reset the Tx ring Qset handle to the correct mapping; which caused Tx queue disable timeouts. Change-ID: I4da5915ec92a83c281b478d653fae6ef1b72edfe Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix the case where per TC queue count was higher than queues enabledAnjali Singhai
When the driver or hardware gets less interrupt vectors than the actual number of CPU cores, limit the queue count for the priority queue traffic class (TC) queues. This will fix a warning with multiple function mode where systems regularly have more cores than vectors. Also add extra comment for readability. Change-ID: I4f02226263aa3995e1f5ee5503eac0cd6ee12fbd Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>