summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
AgeCommit message (Collapse)Author
2014-04-07Merge tag 'fbdev-omap-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull OMAP fbdev changes from Tomi Valkeinen: "This is based on the already pulled fbdev-main changes, and this also merges .dts branch from Tony Lindgren (which has also been pulled), so that I was able to add the display related .dts changes. This contains OMAP related fbdev changes for 3.15. The bulk of the patches are for adding Device Tree support for OMAP Display Subsystem: - SoCs: OMAP2/3/4 - Boards: OMAP4 Panda, OMAP4 SDP, OMAP3 Beagle, OMAP3 Beagle-xM, OMAP3 IGEP0020, OMAP3 N900 - Devices: TFP410 Encoder, tpd12s015 HDMI companion chip, Sony acx565akm panel, MIPI DSI Command mode panel and HDMI, DVI and Analog TV connectors" * tag 'fbdev-omap-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (45 commits) OMAPDSS: HDMI: fix interlace output OMAPDSS: add missing __init for dss_init_ports ARM: OMAP2+: remove pdata quirks for displays OMAPDSS: remove DT hacks for regulators Doc/DT: Add DT binding documentation for tpd12s015 encoder Doc/DT: Add DT binding documentation for TFP410 encoder Doc/DT: Add DT binding documentation for Sony acx565akm panel Doc/DT: Add DT binding documentation for MIPI DSI CM Panel Doc/DT: Add DT binding documentation for HDMI Connector Doc/DT: Add DT binding documentation for DVI Connector Doc/DT: Add DT binding documentation for Analog TV Connector ARM: omap3-n900.dts: add display information ARM: omap3-igep0020.dts: add display information ARM: omap3-beagle-xm.dts: add display information ARM: omap3-beagle.dts: add display information ARM: omap4-sdp.dts: add display information Doc/DT: Add DT binding documentation for OMAP DSS OMAPDSS: acx565akm: Add DT support OMAPDSS: connector-analog-tv: Add DT support OMAPDSS: hdmi-connector: Add DT support ...
2014-04-07Merge tag 'mfd-for-linus-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
2014-04-07Merge tag 'for-linus-20140405' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: - A few SPI NOR ID definitions - Kill the NAND "max pagesize" restriction - Fix some x16 bus-width NAND support - Add NAND JEDEC parameter page support - DT bindings for NAND ECC - GPMI NAND updates (subpage reads) - More OMAP NAND refactoring - New STMicro SPI NOR driver (now in 40 patches!) - A few other random bugfixes * tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd: (120 commits) Fix index regression in nand_read_subpage mtd: diskonchip: mem resource name is not optional mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH mtd: nand: fix GET/SET_FEATURES address on 16-bit devices mtd: omap2: Use devm_ioremap_resource() mtd: denali_dt: Use devm_ioremap_resource() mtd: devices: elm: update DRIVER_NAME as "omap-elm" mtd: devices: elm: configure parallel channels based on ecc_steps mtd: devices: elm: clean elm_load_syndrome mtd: devices: elm: check for hardware engine's design constraints mtd: st_spi_fsm: Succinctly reorganise .remove() mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M" mtd: st_spi_fsm: Avoid duplicating MTD core code mtd: st_spi_fsm: Remove useless consts from function arguments mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back ...
2014-04-05Merge tag 'iommu-updates-v3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU upates from Joerg Roedel: "This time a few more updates queued up. - Rework VT-d code to support ACPI devices - Improvements for memory and PCI hotplug support in the VT-d driver - Device-tree support for OMAP IOMMU - Convert OMAP IOMMU to use devm_* interfaces - Fixed PASID support for AMD IOMMU - Other random cleanups and fixes for OMAP, ARM-SMMU and SHMOBILE IOMMU Most of the changes are in the VT-d driver because some rework was necessary for better hotplug and ACPI device support" * tag 'iommu-updates-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (75 commits) iommu/vt-d: Fix error handling in ANDD processing iommu/vt-d: returning free pointer in get_domain_for_dev() iommu/vt-d: Only call dmar_acpi_dev_scope_init() if DRHD units present iommu/vt-d: Check for NULL pointer in dmar_acpi_dev_scope_init() iommu/amd: Fix logic to determine and checking max PASID iommu/vt-d: Include ACPI devices in iommu=pt iommu/vt-d: Finally enable translation for non-PCI devices iommu/vt-d: Remove to_pci_dev() in intel_map_page() iommu/vt-d: Remove pdev from intel_iommu_attach_device() iommu/vt-d: Remove pdev from iommu_no_mapping() iommu/vt-d: Make domain_add_dev_info() take struct device iommu/vt-d: Make domain_remove_one_dev_info() take struct device iommu/vt-d: Rename 'hwdev' variables to 'dev' now that that's the norm iommu/vt-d: Remove some pointless to_pci_dev() calls iommu/vt-d: Make get_valid_domain_for_dev() take struct device iommu/vt-d: Make iommu_should_identity_map() take struct device iommu/vt-d: Handle RMRRs for non-PCI devices iommu/vt-d: Make get_domain_for_dev() take struct device iommu/vt-d: Make domain_context_mapp{ed,ing}() take struct device iommu/vt-d: Make device_to_iommu() cope with non-PCI devices ...
2014-04-05Merge tag 'clk-for-linus-3.15' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock framework changes from Mike Turquette: "The clock framework changes for 3.15 look similar to past pull requests. Mostly clock driver updates, more Device Tree support in the form of common functions useful across platforms and a handful of features and fixes to the framework core" * tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: shmobile: fix setting paretn clock rate clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1 clk: Fix minor errors in of_clk_init() function comments clk: reverse default clk provider initialization order in of_clk_init() clk: sirf: update copyright years to 2014 clk: mmp: try to use closer one when do round rate clk: mmp: fix the wrong calculation formula clk: mmp: fix wrong mask when calculate denominator clk: st: Adds quadfs clock binding clk: st: Adds clockgen-vcc and clockgen-mux clock binding clk: st: Adds clockgen clock binding clk: st: Adds divmux and prediv clock binding clk: st: Support for A9 MUX clocks clk: st: Support for ClockGenA9/DDR/GPU clk: st: Support for QUADFS inside ClockGenB/C/D/E/F clk: st: Support for VCC-mux and MUX clocks clk: st: Support for PLLs inside ClockGenA(s) clk: st: Support for DIVMUX and PreDiv Clocks clk: support hardware-specific debugfs entries clk: s2mps11: Use of_get_child_by_name ...
2014-04-05Merge tag 'pwm/for-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The legacy HAVE_PWM Kconfig symbol is finally being retired. Thanks a lot to Sascha Hauer for doing that. Three new drivers are added: Freescale FTM, Cirrus Logic CLPS711X and Intel Low Power Subsystem. An assortment of fixes and cleanups rounds things off for this release cycle" * tag 'pwm/for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: pxa: Constify OF match table pwm: pxa: Fix typo "pwm" -> "PWM" Revert "pwm: pxa: Use of_match_ptr()" pwm: add support for Intel Low Power Subsystem PWM pwm: Add CLPS711X PWM support pwm: atmel: correct CDTY calculation pwm: atmel: Fix polarity handling Documentation: Add device tree bindings for Freescale FTM PWM. pwm: Add Freescale FTM PWM driver support pwm: pxa: Use of_match_ptr() pwm: samsung: Use SIMPLE_DEV_PM_OPS macro pwm: renesas-tpu: Add dependency on HAS_IOMEM pwm: Remove obsolete HAVE_PWM Kconfig symbol
2014-04-05Merge tag 'tags/cleanup2-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-05Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
2014-04-05Merge tag 'soc-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "Lots of changes specific to one of the SoC families. Some that stick out are: - mach-qcom gains new features, most importantly SMP support for the newer chips (Stephen Boyd, Rohit Vaswani) - mvebu gains support for three new SoCs: Armada 375, 380 and 385 (Thomas Petazzoni and Free-electrons team) - SMP support for Rockchips (Heiko Stübner) - Lots of i.MX changes (Shawn Guo) - Added support for BCM5301x SoC (Hauke Mehrtens) - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn and Sebastian Hesselbarth doing the final part of a long journey) - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd Bergmann)" * tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits) ARM: sunxi: Select HAVE_ARM_ARCH_TIMER ARM: cache-tauros2: remove ARMv6 code ARM: mvebu: don't select CONFIG_NEON ARM: davinci: fix DT booting with default defconfig ARM: configs: bcm_defconfig: enable bcm590xx regulator support ARM: davinci: remove tnetv107x support MAINTAINERS: Update ARM STi maintainers ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE ARM: bcm21664: Add board support. ARM: sunxi: Add the new watchog compatibles to the reboot code ARM: enable ARM_HAS_SG_CHAIN for multiplatform ARM: davinci: remove da8xx_omapl_defconfig ARM: davinci: da8xx: fix multiple watchdog device registration ARM: davinci: add da8xx specific configs to davinci_all_defconfig ARM: davinci: enable da8xx build concurrently with older devices ARM: BCM5301X: workaround suppress fault ARM: BCM5301X: add early debugging support ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU ARM: mach-bcm: Remove GENERIC_TIME ARM: shmobile: APMU: Fix warnings due to improper printk formats ...
2014-04-05Merge tag 'cleanup-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-04-05Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM changes from Russell King: - Perf updates from Will Deacon: - Support for Qualcomm Krait processors (run perf on your phone!) - Support for Cortex-A12 (run perf stat on your FPGA!) - Support for perf_sample_event_took, allowing us to automatically decrease the sample rate if we can't handle the PMU interrupts quickly enough (run perf record on your FPGA!). - Basic uprobes support from David Long: This patch series adds basic uprobes support to ARM. It is based on patches developed earlier by Rabin Vincent. That approach of adding hooks into the kprobes instruction parsing code was not well received. This approach separates the ARM instruction parsing code in kprobes out into a separate set of functions which can be used by both kprobes and uprobes. Both kprobes and uprobes then provide their own semantic action tables to process the results of the parsing. - ARMv7M (microcontroller) updates from Uwe Kleine-König - OMAP DMA updates (recently added Vinod's Ack even though they've been sitting in linux-next for a few months) to reduce the reliance of omap-dma on the code in arch/arm. - SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan - Support for Cortex-A12 CPU - Align support for ARMv6 with ARMv7 so they can cooperate better in a single zImage. - Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support. - Removal of IRQ_DISABLED from various ARM files - Improved efficiency of virt_to_page() for single zImage - Patch from Ulf Hansson to permit runtime PM callbacks to be available for AMBA devices for suspend/resume as well. - Finally kill asm/system.h on ARM. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits) dmaengine: omap-dma: more consolidation of CCR register setup dmaengine: omap-dma: move IRQ handling to omap-dma dmaengine: omap-dma: move register read/writes into omap-dma.c ARM: omap: dma: get rid of 'p' allocation and clean up ARM: omap: move dma channel allocation into plat-omap code ARM: omap: dma: get rid of errata global ARM: omap: clean up DMA register accesses ARM: omap: remove almost-const variables ARM: omap: remove references to disable_irq_lch dmaengine: omap-dma: cleanup errata 3.3 handling dmaengine: omap-dma: provide register read/write functions dmaengine: omap-dma: use cached CCR value when enabling DMA dmaengine: omap-dma: move barrier to omap_dma_start_desc() dmaengine: omap-dma: move clnk_ctrl setting to preparation functions dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers dmaengine: omap-dma: consolidate clearing channel status register dmaengine: omap-dma: move CCR buffering disable errata out of the fast path dmaengine: omap-dma: provide register definitions dmaengine: omap-dma: consolidate setup of CCR dmaengine: omap-dma: consolidate setup of CSDP ...
2014-04-05Merge branch 'topic/exynos' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull exynos media updates from Mauro Carvalho Chehab: "These are the remaining patches I have for the merge windows. It basically adds a new sensor and adds the needed DT bits for it to work" * 'topic/exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] s5p-fimc: Remove reference to outdated macro [media] s5p-jpeg: Fix broken indentation in jpeg-regs.h [media] exynos4-is: Add the FIMC-IS ISP capture DMA driver [media] exynos4-is: Add support for asynchronous subdevices registration [media] exynos4-is: Add clock provider for the SCLK_CAM clock outputs [media] exynos4-is: Use external s5k6a3 sensor driver [media] V4L: s5c73m3: Add device tree support [media] V4L: Add driver for s5k6a3 image sensor [media] Documentation: devicetree: Update Samsung FIMC DT binding [media] Documentation: dt: Add binding documentation for S5C73M3 camera [media] Documentation: dt: Add binding documentation for S5K6A3 image sensor
2014-04-04Merge tag 'fbdev-main-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev changes from Tomi Valkeinen: "Various fbdev fixes and improvements, but nothing big" * tag 'fbdev-main-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (38 commits) fbdev: Make the switch from generic to native driver less alarming Video: atmel: avoid the id of fix screen info is overwritten video: imxfb: Add DT default contrast control register property. video: atmel_lcdfb: ensure the hardware is initialized with the correct mode fbdev: vesafb: add dev->remove() callback fbdev: efifb: add dev->remove() callback video: pxa3xx-gcu: switch to devres functions video: pxa3xx-gcu: provide an empty .open call video: pxa3xx-gcu: pass around struct device * video: pxa3xx-gcu: rename some symbols sisfb: fix 1280x720 resolution support video: fbdev: uvesafb: Remove impossible code path in uvesafb_init_info video: fbdev: uvesafb: Remove redundant NULL check in uvesafb_remove fbdev: FB_OPENCORES should depend on HAS_DMA OMAPDSS: convert pixel clock to common videomode style OMAPDSS: Remove unused get_context_loss_count support OMAPDSS: use DISPC register to detect context loss video: da8xx-fb: Use "SIMPLE_DEV_PM_OPS" macro video: imxfb: Convert to SIMPLE_DEV_PM_OPS video: imxfb: Resolve mismatch between backlight/contrast ...
2014-04-04Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "The main set of series of patches for media subsystem, including: - document RC sysfs class - added an API to setup scancode to allow waking up systems using the Remote Controller - add API for SDR devices. Drivers are still on staging - some API improvements for getting EDID data from media inputs/outputs - new DVB frontend driver for drx-j (ATSC) - one driver (it913x/it9137) got removed, in favor of an improvement on another driver (af9035) - added a skeleton V4L2 PCI driver at documentation - added a dual flash driver (lm3646) - added a new IR driver (img-ir) - added an IR scancode decoder for the Sharp protocol - some improvements at the usbtv driver, to allow its core to be reused. - added a new SDR driver (rtl2832u_sdr) - added a new tuner driver (msi001) - several improvements at em28xx driver to fix PM support, device removal and to split the V4L2 specific bits into a separate sub-driver - one driver got converted to videobuf2 (s2255drv) - the e4000 tuner driver now follows an improved binding model - some fixes at V4L2 compat32 code - several fixes and enhancements at videobuf2 code - some cleanups at V4L2 API documentation - usual driver enhancements, new board additions and misc fixups" [ NOTE! This merge effective drops commit 4329b93b283c ("of: Reduce indentation in of_graph_get_next_endpoint"). The of_graph_get_next_endpoint() function was moved and renamed by commit fd9fdb78a9bf ("[media] of: move graph helpers from drivers/media/v4l2-core to drivers/of"). It was originally called v4l2_of_get_next_endpoint() and lived in the file drivers/media/v4l2-core/v4l2-of.c. In that original location, it was then fixed to support empty port nodes by commit b9db140c1e46 ("[media] v4l: of: Support empty port nodes"), and that commit clashes badly with the dropped "Reduce intendation" commit. I had to choose one or the other, and decided that the "Support empty port nodes" commit was more important ] * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits) [media] em28xx-dvb: fix PCTV 461e tuner I2C binding Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding" [media] em28xx: fix PCTV 290e LNA oops [media] em28xx-dvb: fix PCTV 461e tuner I2C binding [media] m88ds3103: fix bug on .set_tone() [media] saa7134: fix WARN_ON during resume [media] v4l2-dv-timings: add module name, description, license [media] videodev2.h: add parenthesis around macro arguments [media] saa6752hs: depends on CRC32 [media] si4713: fix Kconfig dependencies [media] Sensoray 2255 uses videobuf2 [media] adv7180: free an interrupt on failure paths in init_device() [media] e4000: make VIDEO_V4L2 dependency optional [media] af9033: Don't export functions for the hardware filter [media] af9035: use af9033 PID filters [media] af9033: implement PID filter [media] rtl2832_sdr: do not use dynamic stack allocation [media] e4000: fix 32-bit build error [media] em28xx-audio: make sure audio is unmuted on open() [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format ...
2014-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "The first round of updates for the input subsystem. Just new drivers and existing driver fixes, no core changes except for the new uinput IOCTL to allow userspace to fetch sysfs name of the input device that was created" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (43 commits) Input: edt-ft5x06 - add a missing condition Input: appletouch - fix jumps when additional fingers are detected Input: appletouch - implement sensor data smoothing Input: add driver for SOC button array Input: pm8xxx-vibrator - add DT match table Input: pmic8xxx-pwrkey - migrate to DT Input: pmic8xxx-keypad - migrate to DT Input: pmic8xxx-keypad - migrate to regmap APIs Input: pmic8xxx-keypad - migrate to devm_* APIs Input: pmic8xxx-keypad - fix build by removing gpio configuration Input: add new driver for ARM CLPS711X keypad Input: edt-ft5x06 - add support for M09 firmware version Input: edt-ft5x06 - ignore touchdown events Input: edt-ft5x06 - adjust delays to conform datasheet Input: edt-ft5x06 - add DT support Input: edt-ft5x06 - several cleanups; no functional change Input: appletouch - dial back fuzz setting Input: remove obsolete tnetv107x drivers Input: sirfsoc-onkey - set the capability of reporting KEY_POWER Input: da9052_onkey - use correct register bit for key status ...
2014-04-03Merge tag 'gpio-v3.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull bulk of gpio updates from Linus Walleij: "A pretty big chunk of changes this time, but it has all been on rotation in linux-next and had some testing. Of course there will be some amount of fixes on top... - Merged in a branch of irqchip changes from Thomas Gleixner: we need to have new callbacks from the irqchip to determine if the GPIO line will be eligible for IRQs, and this callback must be able to say "no". After some thinking I got the branch from tglx and have switched all current users over to use this. - Based on tglx patches, we have added some generic irqchip helpers in the gpiolib core. These will help centralize code when GPIO drivers have simple chained/cascaded IRQs. Drivers will still define their irqchip vtables, but the gpiolib core will take care of irqdomain set-up, mapping from local offsets to Linux irqs, and reserve resources by marking the GPIO lines for IRQs. - Initially the PL061 and Nomadik GPIO/pin control drivers have been switched over to use the new gpiochip-to-irqchip infrastructure with more drivers expected for the next kernel cycle. The factoring of just two drivers still makes it worth it so it is already a win. - A new driver for the Synopsys DesignWare APB GPIO block. - Modify the DaVinci GPIO driver to be reusable also for the new TI Keystone architecture. - A new driver for the LSI ZEVIO SoCs. - Delete the obsolte tnetv107x driver. - Some incremental work on GPIO descriptors: have gpiod_direction_output() use a logical level, respecting assertion polarity through ACTIVE_LOW flags, adding gpiod_direction_output_raw() for the case where you want to set that very value. Add gpiochip_get_desc() to fetch a GPIO descriptor from a specific offset on a certain chip inside driver code. - Switch ACPI GPIO code over to using gpiochip_get_desc() and get rid of gpio_to_desc(). - The ACPI GPIO event handling code has been reworked after encountering an actual real life implementation. - Support for ACPI GPIO operation regions. - Generic GPIO chips can now be assigned labels/names from platform data. - We now clamp values returned from GPIO drivers to the boolean [0,1] range. - Some improved documentation on how to use the polarity flag was added. - a large slew of incremental driver updates and non-critical fixes. Some targeted for stable" * tag 'gpio-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits) gpio: rcar: Add helper variable dev = &pdev->dev gpio-lynxpoint: force gpio_get() to return "1" and "0" only gpio: unmap gpio irqs properly pch_gpio: set value before enabling output direction gpio: moxart: Actually set output state in moxart_gpio_direction_output() gpio: moxart: Avoid forward declaration gpio: mxs: Allow for recursive enable_irq_wake() call gpio: samsung: Add missing "break" statement gpio: twl4030: Remove redundant assignment gpio: dwapb: correct gpio-cells in binding document gpio: iop: fix devm_ioremap_resource() return value checking pinctrl: coh901: convert driver to use gpiolib irqchip pinctrl: nomadik: convert driver to use gpiolib irqchip gpio: pl061: convert driver to use gpiolib irqchip gpio: add IRQ chip helpers in gpiolib pinctrl: nomadik: factor in platform data container pinctrl: nomadik: rename secondary to latent gpio: Driver for SYSCON-based GPIOs gpio: generic: Use platform_device_id->driver_data field for driver flags pinctrl: coh901: move irq line locking to resource callbacks ...
2014-04-03rtc: sunxi: change compatiblesMaxime Ripard
The Allwinner A10 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Change the compatibles to match the other pattern in the RTC driver for consistency. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Here is my initial pull request for the networking subsystem during this merge window: 1) Support for ESN in AH (RFC 4302) from Fan Du. 2) Add full kernel doc for ethtool command structures, from Ben Hutchings. 3) Add BCM7xxx PHY driver, from Florian Fainelli. 4) Export computed TCP rate information in netlink socket dumps, from Eric Dumazet. 5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas Dichtel. 6) Convert many drivers to pci_enable_msix_range(), from Alexander Gordeev. 7) Record SKB timestamps more efficiently, from Eric Dumazet. 8) Switch to microsecond resolution for TCP round trip times, also from Eric Dumazet. 9) Clean up and fix 6lowpan fragmentation handling by making use of the existing inet_frag api for it's implementation. 10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss. 11) Auto size SKB lengths when composing netlink messages based upon past message sizes used, from Eric Dumazet. 12) qdisc dumps can take a long time, add a cond_resched(), From Eric Dumazet. 13) Sanitize netpoll core and drivers wrt. SKB handling semantics. Get rid of never-used-in-tree netpoll RX handling. From Eric W Biederman. 14) Support inter-address-family and namespace changing in VTI tunnel driver(s). From Steffen Klassert. 15) Add Altera TSE driver, from Vince Bridgers. 16) Optimizing csum_replace2() so that it doesn't adjust the checksum by checksumming the entire header, from Eric Dumazet. 17) Expand BPF internal implementation for faster interpreting, more direct translations into JIT'd code, and much cleaner uses of BPF filtering in non-socket ocntexts. From Daniel Borkmann and Alexei Starovoitov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits) netpoll: Use skb_irq_freeable to make zap_completion_queue safe. net: Add a test to see if a skb is freeable in irq context qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port' net: ptp: move PTP classifier in its own file net: sxgbe: make "core_ops" static net: sxgbe: fix logical vs bitwise operation net: sxgbe: sxgbe_mdio_register() frees the bus Call efx_set_channels() before efx->type->dimension_resources() xen-netback: disable rogue vif in kthread context net/mlx4: Set proper build dependancy with vxlan be2net: fix build dependency on VxLAN mac802154: make csma/cca parameters per-wpan mac802154: allow only one WPAN to be up at any given time net: filter: minor: fix kdoc in __sk_run_filter netlink: don't compare the nul-termination in nla_strcmp can: c_can: Avoid led toggling for every packet. can: c_can: Simplify TX interrupt cleanup can: c_can: Store dlc private can: c_can: Reduce register access can: c_can: Make the code readable ...
2014-04-02Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull devicetree changes from Grant Likely: "Updates to devicetree core code. This branch contains the following notable changes: - add reserved memory binding - make struct device_node a kobject and remove legacy /proc/device-tree - ePAPR conformance fixes - update in-kernel DTC copy to version v1.4.0 - preparatory changes for dynamic device tree overlays - minor bug fixes and documentation changes The most significant change in this branch is the conversion of struct device_node to be a kobject that is exposed via sysfs and removal of the old /proc/device-tree code. This simplifies the device tree handling code and tightens up the lifecycle on device tree nodes. [updated: added fix for dangling select PROC_DEVICETREE]" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits) dt: Remove dangling "select PROC_DEVICETREE" of: Add support for ePAPR "stdout-path" property of: device_node kobject lifecycle fixes of: only scan for reserved mem when fdt present powerpc: add support for reserved memory defined by device tree arm64: add support for reserved memory defined by device tree of: add missing major vendors of: add vendor prefix for SMSC of: remove /proc/device-tree of/selftest: Add self tests for manipulation of properties of: Make device nodes kobjects so they show up in sysfs arm: add support for reserved memory defined by device tree drivers: of: add support for custom reserved memory drivers drivers: of: add initialization code for dynamic reserved memory drivers: of: add initialization code for static reserved memory of: document bindings for reserved-memory nodes Revert "of: fix of_update_property()" kbuild: dtbs_install: new make target ARM: mvebu: Allows to get the SoC ID even without PCI enabled of: Allows to use the PCI translator without the PCI core ...
2014-04-02Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull main powerpc updates from Ben Herrenschmidt: "This time around, the powerpc merges are going to be a little bit more complicated than usual. This is the main pull request with most of the work for this merge window. I will describe it a bit more further down. There is some additional cpuidle driver work, however I haven't included it in this tree as it depends on some work in tip/timer-core which Thomas accidentally forgot to put in a topic branch. Since I didn't want to carry all of that tip timer stuff in powerpc -next, I setup a separate branch on top of Thomas tree with just that cpuidle driver in it, and Stephen has been carrying that in next separately for a while now. I'll send a separate pull request for it. Additionally, two new pieces in this tree add users for a sysfs API that Tejun and Greg have been deprecating in drivers-core-next. Thankfully Greg reverted the patch that removes the old API so this merge can happen cleanly, but once merged, I will send a patch adjusting our new code to the new API so that Greg can send you the removal patch. Now as for the content of this branch, we have a lot of perf work for power8 new counters including support for our new "nest" counters (also called 24x7) under pHyp (not natively yet). We have new functionality when running under the OPAL firmware (non-virtualized or KVM host), such as access to the firmware error logs and service processor dumps, system parameters and sensors, along with a hwmon driver for the latter. There's also a bunch of bug fixes accross the board, some LE fixes, and a nice set of selftests for validating our various types of copy loops. On the Freescale side, we see mostly new chip/board revisions, some clock updates, better support for machine checks and debug exceptions, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits) powerpc/book3s: Fix CFAR clobbering issue in machine check handler. powerpc/compat: 32-bit little endian machine name is ppcle, not ppc powerpc/le: Big endian arguments for ppc_rtas() powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n) powerpc/defconfigs: Enable THP in pseries defconfig powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split powerpc: Rate-limit users spamming kernel log buffer powerpc/perf: Fix handling of L3 events with bank == 1 powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes powerpc/perf: Add kconfig option for hypervisor provided counters powerpc/perf: Add support for the hv 24x7 interface powerpc/perf: Add support for the hv gpci (get performance counter info) interface powerpc/perf: Add macros for defining event fields & formats powerpc/perf: Add a shared interface to get gpci version and capabilities powerpc/perf: Add 24x7 interface headers powerpc/perf: Add hv_gpci interface header powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info) sysfs: create bin_attributes under the requested group powerpc/perf: Enable BHRB access for EBB events powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB ...
2014-04-02Merge branches 'iommu/fixes', 'arm/smmu', 'x86/amd', 'arm/omap', ↵Joerg Roedel
'arm/shmobile' and 'x86/vt-d' into next
2014-04-01Merge tag 'usb-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big USB pull request for 3.15-rc1. The normal set of patches, lots of controller driver updates, and a smattering of individual USB driver updates as well. All have been in linux-next for a while" * tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits) xhci: Transition maintainership to Mathias Nyman. USB: disable reset-resume when USB_QUIRK_RESET is set USB: unbind all interfaces before rebinding any usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210 usb: gadget: tcm_usb_gadget: stop format strings usb: gadget: f_fs: add missing spinlock and mutex unlock usb: gadget: composite: switch over to ERR_CAST() usb: gadget: inode: switch over to memdup_user() usb: gadget: f_subset: switch over to PTR_RET usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence USB: keyspan: remove dead debugging code USB: serial: add missing newlines to dev_<level> messages. USB: serial: add missing braces USB: serial: continue to write on errors USB: serial: continue to read on errors USB: serial: make bulk_out_size a lower limit USB: cypress_m8: fix potential scheduling while atomic devicetree: bindings: document lsi,zevio-usb usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs ...
2014-04-01Merge tag 'tty-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg KH: "Here's the big tty/serial driver update for 3.15-rc1. Nothing major, a number of serial driver updates and a few tty core fixes as well. All have been in linux-next for a while" * tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty/serial: omap: empty the RX FIFO at the end of half-duplex TX tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX serial: sh-sci: Neaten dev_<level> uses serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF serial: sh-sci: Add more register documentation serial: sh-sci: Remove useless casts serial: sh-sci: Replace printk() by pr_*() serial_core: Avoid NULL pointer dereference in uart_close() serial_core: Get a reference for port->tty in uart_remove_one_port() serial: clps711x: Give a chance to perform useful tasks during wait loop serial_core: Grammar s/ports/port's/ serial_core: Spelling s/contro/control/ serial: efm32: properly namespace location property serial: max310x: Add missing #include <linux/uaccess.h> synclink: fix info leak in ioctl serial: 8250: Clean up the locking for -rt serial: 8250_pci: change BayTrail default uartclk serial: 8250_pci: more BayTrail error-free bauds serial: sh-sci: Add missing call to uart_remove_one_port() in failure path serial_core: Unregister console in uart_remove_one_port() ...
2014-04-01Merge tag 'staging-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the huge drivers/staging/ update for 3.15-rc1. Loads of cleanup fixes, a few drivers removed, and some new ones added. All have been in linux-next for a while" * tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1375 commits) staging: xillybus: XILLYBUS_PCIE depends on PCI_MSI staging: xillybus: Added "select CRC32" for XILLYBUS in Kconfig staging: comedi: poc: remove obsolete driver staging: unisys: replace kzalloc/kfree with UISMALLOC/UISFREE staging: octeon-usb: prevent memory corruption staging: usbip: fix line over 80 characters staging: usbip: fix quoted string split across lines Staging: unisys: Remove RETINT macro Staging: unisys: Remove FAIL macro Staging: unisys: Remove RETVOID macro Staging: unisys: Remove RETPTR macro Staging: unisys: Remove RETBOOL macro Staging: unisys: Remove FAIL_WPOSTCODE_1 macro Staging: unisys: Cleanup macros to get rid of goto statements Staging: unisys: include: Remove unused macros from timskmod.h staging: dgap: fix the rest of the checkpatch warnings in dgap.c Staging: bcm: Remove unnecessary parentheses staging: wlags49_h2: Delete unnecessary braces staging: wlags49_h2: Do not use assignment in if condition staging: wlags49_h2: Enclose macro in a do-while loop ...
2014-04-01Merge tag 'char-misc-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg KH: "Here's the big char/misc driver updates for 3.15-rc1. Lots of various things here, including the new mcb driver subsystem. All of these have been in linux-next for a while" * tag 'char-misc-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (118 commits) extcon: Move OF helper function to extcon core and change function name extcon: of: Remove unnecessary function call by using the name of device_node extcon: gpio: Use SIMPLE_DEV_PM_OPS macro extcon: palmas: Use SIMPLE_DEV_PM_OPS macro mei: don't use deprecated DEFINE_PCI_DEVICE_TABLE macro mei: amthif: fix checkpatch error mei: client.h fix checkpatch errors mei: use cl_dbg where appropriate mei: fix Unnecessary space after function pointer name mei: report consistently copy_from/to_user failures mei: drop pr_fmt macros mei: make me hw headers private to me hw. mei: fix memory leak of pending write cb objects mei: me: do not reset when less than expected data is received drivers: mcb: Fix build error discovered by 0-day bot cs5535-mfgpt: Simplify dependencies spmi: pm: drop bus-level PM suspend/resume routines spmi: pmic_arb: make selectable on ARCH_QCOM Drivers: hv: vmbus: Increase the limit on the number of pfns we can handle pch_phub: Report error writing MAC back to user ...
2014-04-01Merge tag 'sound-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There have been lots of changes in ALSA core, HD-audio and ASoC, also most of PCI drivers touched by conversions of printks. All these resulted in a high volume and wide ranged patch sets in this release. Many changes are fairly trivial, but also lots of nice cleanups and refactors. There are a few new drivers, most notably, the Intel Haswell and Baytrail ASoC driver. Core changes: - A bit modernization; embed the device struct into snd_card struct, so that it may be referred from the beginning. A new snd_card_new() function is introduced for that, and all drivers have been converted. - Simplification in the device management code in ALSA core; now managed by a simple priority list instead - Converted many kernel messages to use the standard dev_err() & co; this would be the pretty visible difference, especially for HD-audio. HD-audio: - Conexant codecs use the auto-parser as default now; the old static code still remains in case of regressions. Some old quirks have been rewritten with the fixups for auto-parser. - C-Media codecs also use the auto-parser as default now, too. - A device struct is assigned to each HD-audio codec, and the formerly hwdep attributes are accessible over the codec sysfs, too. hwdep attributes still remain for compatibility. - Split the PCI-specific stuff for HD-audio controller into a separate module, ane make a helper module for the generic controller driver. This is a preliminary change for supporting Tegra HDMI controller in near future, which slipped from 3.15 merge. - Device-specific fixes: mute LED support for Lenovo Ideapad, mic LED fix for HP laptops, more ASUS subwoofer quirks, yet more Dell laptop headset quirks - Make the HD-audio codec response a bit more robust - A few improvements on Realtek ALC282 / 283 about the pop noises - A couple of Intel HDMI fixes ASoC: - Lots of cleanups for enumerations; refactored lots of error prone original codes to use more modern APIs - Elimination of the ASoC level wrappers for I2C and SPI moving us closer to converting to regmap completely and avoiding some randconfig hassle - Provide both manually and transparently locked DAPM APIs rather than a mix of the two fixing some concurrency issues - Start converting CODEC drivers to use separate bus interface drivers rather than having them all in one file helping avoid dependency issues - DPCM support for Intel Haswell and Bay Trail platforms, lots of fixes - Lots of work on improvements for simple-card, DaVinci and the Renesas rcar drivers. - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the CSR SiRF SoC, TLV320AIC31XXX, Armada 370 DB, Cirrus cs42xx8 - Fixes for the simple-card DAI format DT mess - DT support for a couple more devices. - Use of the tdm_slot mapping in a few drivers Others: - Support of reset_resume callback for improved S4 in USB-audio driver; the device with boot quirks have been little tested, which we need to watch out in this development cycle - Add PM support for ICE1712 driver (finally!); it's still pretty partial support, only for M-Audio devices" * tag 'sound-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (610 commits) ALSA: ice1712: Add suspend support for M-Audio ICE1712-based cards ALSA: ice1712: add suspend support for ICE1712 chip ALSA: hda - Enable beep for ASUS 1015E ALSA: asihpi: fix some indenting in snd_card_asihpi_pcm_new() ALSA: hda - add headset mic detect quirks for three Dell laptops ASoC: tegra: move AC97 clock handling to the machine driver ASoC: simple-card: Handle many DAI links ASoC: simple-card: Add DT documentation for multi-DAI links ASoC: simple-card: dynamically allocate the DAI link and properties ASoC: imx-ssi: Add .xlate_tdm_slot_mask() support. ASoC: fsl-esai: Add .xlate_tdm_slot_mask() support. ASoC: fsl-utils: Add fsl_asoc_xlate_tdm_slot_mask() support. ASoC: core: remove the 'of_' prefix of of_xlate_tdm_slot_mask. ASoC: rcar: subnode tidyup for renesas,rsnd.txt ASoC: Remove name_prefix unset during DAI link init hack ALSA: hda - Inform the unexpectedly ignored pins by auto-parser ASoC: rcar: bugfix: it cares about the non-src case ARM: bockw: fixup SND_SOC_DAIFMT_CBx_CFx flags ASoC: pcm: Drop incorrect double/extra frees ASoC: mfld_machine: Fix compile error ...
2014-04-01Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog updates from Wim Van Sebroeck: "This patchset contains: - Various small clean-ups and fixes - boot logic hanegs for mpc8xxx_wdt - it87_wdt: Work around non-working CIR interrupts - iTCO_wdt: Fix the parent device - Kconfig dependencies - simplification of code with devm_ioremap_resource() or platform_driver_probe() - conversion of xilinx watchdog driver to Generic watchdog Framework - addition of extra functionality and devices for the xilinx watchdog driver - Addition of Tegra watchdog" * git://www.linux-watchdog.org/linux-watchdog: (38 commits) watchdog: Fix Elan SC520 dependencies watchdog: ib700wdt: Use platform_driver_probe watchdog: geodewdt: Use platform_driver_probe watchdog: advantechwdt: Use platform_driver_probe watchdog: acquirewdt: Use platform_driver_probe watchdog: iTCO_wdt: Fix the parent device watchdog: it87_wdt: Work around non-working CIR interrupts watchdog: bcm281xx: Fix Kconfig dependency watchdog: s3c2410_wdt: Check return value of clk_prepare_enable watchdog: s3c2410_wdt: Remove unneeded initialization watchdog: sunxi: Change compatibles watchdog: orion: prepare new Dove DT Kconfig variable watchdog: fix checkpatch warnings and error watchdog: Add tegra watchdog watchdog: xilinx: Remove no_timeout variable watchdog: xilinx: Enable this driver for Zynq watchdog: xilinx: Add missing binding watchdog: xilinx: Use correct comment indentation watchdog: xilinx: Use of_property_read_u32 watchdog: xilinx: Fix all printk messages ...
2014-04-01Merge tag 'spi-v3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi Updates from Mark Brown: "A busy release for both cleanups and new drivers this time along with further factoring out of replicated code into the core: - Provide support in the core for DMA mapping transfers - essentially all drivers weren't implementing this properly, now there's no excuse. - Dual and quad mode support for spidev. - Fix handling of cs_change in the generic implementation. - Remove the S3C_DMA code from the s3c64xx driver now that all the platforms using it have been converted to dmaengine. - Lots of improvements to the Renesas SPI controllers. - Drivers for Allwinner A10 and A31, Qualcomm QUP and Xylinx xtfpga. - Removal of the bitrotted ti-ssp driver" * tag 'spi-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (199 commits) spi: Fix handling of cs_change in core implementation spi: bitbang: Make spi_bitbang_stop() return void spi: mpc52xx: Convert to use bits_per_word_mask spi: omap-100k: Fix memory leak spi: dw: Don't call kfree for memory allocated by devm_kzalloc spi: fsl-dspi: Fix memory leak spi: omap-uwire: add missing iounmap spi: clps711x: Convert to use master->max_speed_hz spi: clps711x: Enable driver compilation with COMPILE_TEST spi: omap-uwire: Remove full duplex check spi: Do not require a completion spi: topcliff-pch: Transform noisy message to dev_vdbg spi: coldfire-qspi: Simplify the code to set register bits for transfer speed spi: bcm63xx: Remove unused define for PFX spi: efm32: use $vendor,$device scheme for compatible string spi: clps711x: Remove <mach/hardware.h> dependency spi: topcliff-pch: Properly unregister platform devices on probe() error paths spi: fsl-espi: Remove unused bits_per_word variable in fsl_espi_bufs spi: altera: Remove the code to get unused platform_data spi: fsl-lib: Fix memory leak of pinfo ...
2014-04-01Merge tag 'regulator-v3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This release has lots and lots of small cleanups and fixes in the regulator subsystem, mainly cleaning up some bad patterns that got duplicated in DT code, but otherwise very little of note outside of the scope of the relevant drivers: - Support for configuration of the initial state for gpio regulators with multi-voltage support. - Support for calling regulator_set_voltage() on fixed regulators. - New drivers for Broadcom BCM590xx, Freescale pfuze200, Samsung S2MPA01 & S2MPS11/4, some PWM controlled regulators found on some ST boards and TI TPS65218" * tag 'regulator-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (154 commits) regulator: aat2870: Use regulator_map_voltage_ascend regulator: st-pwm: Convert to get_voltage_sel regulator: Add new driver for ST's PWM controlled voltage regulators regulator: bcm590xx: Remove **rdev from struct bcm590xx_reg regulator: bcm590xx: Make the modalias matches the driver name regulator: s5m8767: Convert to use regulator_[enable|disable|is_enabled]_regmap regulator: db8500-prcmu: Set 1.8V as a fixed voltage for vsmps2 regulator: s2mps11: Add missing of_node_put regulator: s2mps11: Use of_get_child_by_name Documentation: mfd: s2mps11: Document support for S2MPS14 regulator: s2mps11: Add set_suspend_disable for S2MPS14 regulator: s2mps11: Add support for S2MPS14 regulators regulator: max8660: Fix brace alignment regulator: dbx500: use seq_puts() instead of seq_printf() regulator: dbx500-prcmu: Silence checkpatch warnings regulator: anatop: Remove checking control_reg in [set|get]_voltage_sel regulator: max8952: Silence checkpatch warning regulator: max8925: Silence checkpatch warning regulator: max8660: Silence checkpatch warnings regulator: arizona-ldo1: Correct default regulator init_data ...
2014-04-01Merge tag 'pinctrl-v3.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk changes from Linus Walleij: "Pin control bulk changes for the v3.15 series, no new core functionality this time, just incremental driver updates: - A large refactoring of the MVEBU (Marvell) driver. - A large refactoring of the Tegra (nVidia) driver. - GPIO interrupt including soft edges support in the STi driver. - Misc updates to PFC (Renesas), AT91, ADI2 (Blackfin), pinctrl-single, sirf (CSR), msm (Qualcomm), Exynos (Samsung), sunxi (AllWinner), i.MX (Freescale), Baytrail" * tag 'pinctrl-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: tegra: add some missing Tegra114 entries pinctrl: tegra: fix some mistakes in Tegra124 pinctrl: msm: fix up out-of-order merge conflict pinctrl: st: Fix error check for of_irq_to_resource usage pinctrl: tegra: consistency cleanup pinctrl: tegra: dynamically calculate function list of groups pinctrl: tegra: init Tegra20/30 at module_init time pinctrl: st: Use ARRAY_SIZE instead of raw value for number of delays pinctrl: st: add pinctrl support for the STiH407 SoC pinctrl: st: Enhance the controller to manage unavailable registers pinctrl: msm: Simplify msm_config_reg() and callers pinctrl: msm: Remove impossible WARN_ON()s pinctrl: msm: Replace lookup tables with math pinctrl: msm: Drop OF_IRQ dependency pinctrl: msm: Drop unused includes pinctrl: msm: Check for ngpios > MAX_NR_GPIO pinctrl: msm: Silence recursive lockdep warning pinctrl: mvebu: silence WARN to dev_warn pinctrl: msm: drop wake_irqs bitmap pinctrl-baytrail: add function mux checking in gpio pin request ...
2014-04-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq code updates from Thomas Gleixner: "The irq department proudly presents: - Another tree wide sweep of irq infrastructure abuse. Clear winner of the trainwreck engineering contest was: #include "../../../kernel/irq/settings.h" - Tree wide update of irq_set_affinity() callbacks which miss a cpu online check when picking a single cpu out of the affinity mask. - Tree wide consolidation of interrupt statistics. - Updates to the threaded interrupt infrastructure to allow explicit wakeup of the interrupt thread and a variant of synchronize_irq() which synchronizes only the hard interrupt handler. Both are needed to replace the homebrewn thread handling in the mmc/sdhci code. - New irq chip callbacks to allow proper support for GPIO based irqs. The GPIO based interrupts need to request/release GPIO resources from request/free_irq. - A few new ARM interrupt chips. No revolutionary new hardware, just differently wreckaged variations of the scheme. - Small improvments, cleanups and updates all over the place" I was hoping that that trainwreck engineering contest was a April Fools' joke. But no. * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits) irqchip: sun7i/sun6i: Disable NMI before registering the handler ARM: sun7i/sun6i: dts: Fix IRQ number for sun6i NMI controller ARM: sun7i/sun6i: irqchip: Update the documentation ARM: sun7i/sun6i: dts: Add NMI irqchip support ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller genirq: Export symbol no_action() arm: omap: Fix typo in ams-delta-fiq.c m68k: atari: Fix the last kernel_stat.h fallout irqchip: sun4i: Simplify sun4i_irq_ack irqchip: sun4i: Use handle_fasteoi_irq for all interrupts genirq: procfs: Make smp_affinity values go+r softirq: Add linux/irq.h to make it compile again m68k: amiga: Add linux/irq.h to make it compile again irqchip: sun4i: Don't ack IRQs > 0, fix acking of IRQ 0 irqchip: sun4i: Fix a comment about mask register initialization irqchip: sun4i: Fix irq 0 not working genirq: Add a new IRQCHIP_EOI_THREADED flag genirq: Document IRQCHIP_ONESHOT_SAFE flag ARM: sunxi: dt: Convert to the new irq controller compatibles irqchip: sunxi: Change compatibles ...
2014-04-01Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Thomas Gleixner: "This assorted collection provides: - A new timer based timer broadcast feature for systems which do not provide a global accessible timer device. That allows those systems to put CPUs into deep idle states where the per cpu timer device stops. - A few NOHZ_FULL related improvements to the timer wheel - The usual updates to timer devices found in ARM SoCs - Small improvements and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) tick: Remove code duplication in tick_handle_periodic() tick: Fix spelling mistake in tick_handle_periodic() x86: hpet: Use proper destructor for delayed work workqueue: Provide destroy_delayed_work_on_stack() clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS timer: Remove code redundancy while calling get_nohz_timer_target() hrtimer: Rearrange comments in the order struct members are declared timer: Use variable head instead of &work_list in __run_timers() clocksource: exynos_mct: silence a static checker warning arm: zynq: Add support for cpufreq arm: zynq: Don't use arm_global_timer with cpufreq clocksource/cadence_ttc: Overhaul clocksource frequency adjustment clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI sh: Remove Kconfig entries for TMU, CMT and MTU2 ARM: shmobile: Remove CMT, TMU and STI Kconfig entries clocksource: armada-370-xp: Use atomic access for shared registers clocksource: orion: Use atomic access for shared registers clocksource: timer-keystone: Delete unnecessary variable clocksource: timer-keystone: introduce clocksource driver for Keystone ...
2014-03-31Merge branch 'for-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "A lot of activities on libata side this time. - A lot of changes around ahci. Various embedded platforms are implementing ahci controllers. Some were built atop ahci_platform, others were doing their own things. Hans made some structural changes to libahci and librarized ahci_platform so that ahci platform drivers can share more common code. A couple platform drivers are added on top of that and several are added to replace older drivers which were doing their own things (older ones are scheduled to be removed). - Dan finishes the patchset to make libata PM operations asynchronous. Combined with one patch being routed through scsi, this should speed resume measurably. - Various fixes and cleanups from Bartlomiej and others" * 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (61 commits) ata: fix Marvell SATA driver dependencies ata: fix ARASAN CompactFlash PATA driver dependencies ata: remove superfluous casts ata: sata_highbank: remove superfluous cast ata: fix Calxeda Highbank SATA driver dependencies ata: fix R-Car SATA driver dependencies ARM: davinci: da850: update SATA AHCI support ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller ata: move library code from ahci_platform.c to libahci_platform.c ata: ahci_platform: fix ahci_platform_data->suspend method handling libata: remove unused ata_sas_port_async_resume() stub libata.h: add stub for ata_sas_port_resume libata: async resume libata, libsas: kill pm_result and related cleanup ata: Fix compiler warning with APM X-Gene host controller driver arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries ata: Add APM X-Gene SoC AHCI SATA host controller driver Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries ata: ahci_sunxi: fix code formatting ...
2014-03-31mfd: arizona: Correct small errors in the DT binding documentationCharles Keepax
This patch does not alter the binding at all it only brings the documentation up to date with the existing binding. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-31mfd: devicetree: bindings: Add pm8xxx RTC descriptionJosh Cartwright
The PM8xxx family of PMICs contain an RTC. This RTC is described as a subnode of the PM8xxx. Document these bindings, and replace the pwrkey node in the example with the RTC, which is now described in this document. While we're here, add a short description to the device tree bindings describing what the the PM8xxx devices are and how they are expected to be used. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-31watchdog: sunxi: Change compatiblesMaxime Ripard
The Allwinner A10 and A31 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Change the compatibles to match the other pattern in the watchdog controller driver for consistency. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Add missing bindingMichal Simek
Document current driver binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31Merge remote-tracking branch 'robh/for-next' into devicetree/nextGrant Likely
2014-03-30Input: pm8xxx-vibrator - add DT match tableStephen Boyd
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: pmic8xxx-pwrkey - migrate to DTStephen Boyd
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: pmic8xxx-keypad - migrate to DTStephen Boyd
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: add new driver for ARM CLPS711X keypadAlexander Shiyan
This patch adds a new driver for keypad for Cirrus Logic CLPS711X CPUs. Target CPU contain keyboard interface which can scan 8 column lines, so we can read row GPIOs to read status and determine asserted state. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Merge remote-tracking branches 'spi/topic/xilinx' and 'spi/topic/xtfpga' ↵Mark Brown
into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/sunxi', 'spi/topic/tegra114', ↵Mark Brown
'spi/topic/ti-qspi', 'spi/topic/ti-ssp', 'spi/topic/topcliff-pch', 'spi/topic/txx9', 'spi/topic/xcomm' and 'spi/topic/xfer' into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/s3c64xx', 'spi/topic/sc18is602', ↵Mark Brown
'spi/topic/sh-hspi', 'spi/topic/sh-msiof', 'spi/topic/sh-sci', 'spi/topic/sirf' and 'spi/topic/spidev' into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/omap-uwire', 'spi/topic/omap100k', ↵Mark Brown
'spi/topic/omap2', 'spi/topic/orion', 'spi/topic/pl022', 'spi/topic/qup', 'spi/topic/rspi' and 'spi/topic/s3c24xx' into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/drivers', 'spi/topic/dw', ↵Mark Brown
'spi/topic/efm32', 'spi/topic/ep93xx', 'spi/topic/fsl', 'spi/topic/fsl-dspi', 'spi/topic/fsl-espi' and 'spi/topic/gpio' into spi-next
2014-03-29devicetree: fix newly added exynos sata bindingsArnd Bergmann
Commit ba0d7ed391b7b "ARM: dts: enable ahci sata and sata phy for exynos5250" added a new binding document for the sata phy device, and changed the sata controller binding. However, in both cases significant aspects of the binding remained undocumented. This attempts to reconstruct the actual binding from the usage. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Kukjin Kim <kgene.kim@samsung.com>
2014-03-29Merge tag 'samsung-dt-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup3 Merge "Samsung 2nd DT updates for v3.15" from Kukjin Kim: - add DT entry for AHCI SATA and SATA PHY with using generic PHY framework for exynos5250 and arndale, smdk5250 boards. - add SSS DT node for exynos5420 and exynos5250 - remove leftover spi0 node for smdk5250 board - add ADC and thermistor nodes for exynos4412-trats2 board - move common irq-combiner node for exynos4x12 from exynos4212 and exynos4412 - add ADC, PMU and GPS_ALIVE power domain nodes for exynos4x12 Note that based on previous tags/samsung-dt and tags/exynos-clk * tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: enable ahci sata and sata phy for exynos5250 ARM: dts: add dt node for sss module for exynos5250/5420 ARM: dts: Remove leftover spi0 node for smdk5250 ARM: dts: Add ADC and themistor nodes for exynos4412-trats2 ARM: dts: Move common dt data for interrupt combiner controller for exynos4x12 ARM: dts: Add GPS_ALIVE power domain for exynos4x12 ARM: dts: Add PMU dt data to support PMU for exynos4x12 ARM: dts: Add ADC's dt data to read raw data for exynos4x12 Signed-off-by: Arnd Bergmann <arnd@arndb.de>