summaryrefslogtreecommitdiffstats
path: root/Documentation/sound
AgeCommit message (Collapse)Author
2008-08-14ALSA: virtuoso: add Xonar D1 supportClemens Ladisch
Add support for the Asus Xonar D1. It is the same as the DX, but without the external power detection. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel). ALSA: cs4232: fix crash during chip PNP detection ALSA: hda - Add automatic model setting for the Acer Aspire 5920G laptop ALSA: make snd_ac97_add_vmaster() static ALSA: sound/pci/azt3328.h: no variables for enums ALSA: soc - wm9712 mono mixer ALSA: hda - Add support of ASUS Eeepc P90* ALSA: opti9xx: no isapnp param for !CONFIG_PNP ALSA: opti93x - Fix NULL dereference ALSA: hda - Added support for Asus V1Sn ALSA: ASoC: Factor PGA DAPM handling into main ALSA: ASoC: Refactor DAPM event handler ALSA: ALSA: ens1370: communicate PCI device to AC97 ALSA: ens1370: SRC stands for Sample Rate Converter ALSA: hda - Align BDL position adjustment parameter ALSA: Au1xpsc: psc not disabled when TX is idle ALSA: add TriTech 28023 AC97 codec ID and Wolfson 9701 name.
2008-07-27ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel).Nicolas Boichat
Currently, even if you pass model=intel-mac-v3 as a module parameter to snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still try to auto-detect the model type. This is a problem on my MacBook Pro 1st generation, which needs intel-mac-v3, but sometimes incorrectly reports 0x00000100 as subsystem id, which causes the switch in patch_stac922x to select intel-mac-v4. To fix this, I added a new model called intel-mac-auto, so in case no module parameter is passed, and an Intel Mac board is detected, the model will be automatically detected, while no detection will be done if the model is forced to intel-mac-v3. This problem has been around for quite a while, and I used to fix it by moving the case statement for 0x00000100 in patch_stac922x so that intel-mac-v3 is chosen. Another way to fix the problem would be to check if a module parameter was set directly in patch_stac922x, using something like this: if (spec->board_config == STAC_INTEL_MAC_V3 && !codec->bus->modelname) { But I think it is less elegant (if you prefer that way, I can prepare a patch). Signed-off-by: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-26Documentation cleanup: trivial misspelling, punctuation, and grammar ↵Matt LaPlante
corrections. Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22remove mention of CONFIG_KMOD from documentationJohannes Berg
Also includes a few Kconfig files (xtensa, blackfin) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: linux-doc@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Randy Dunlap <rdunlap@xenotime.net>
2008-06-13ALSA: hda - Add description of bdl_pos_adj optionTakashi Iwai
Added a brief description of the new bdl_pos_adj option to ALSA-Configuration.txt. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - remove position_fix=3Takashi Iwai
position_fix=3 is the option to correct the DMA position with the FIFO size. But, it never worked correctly, and we have now more other workarounds for the DMA position fixes. Thus better to remove it. Also, change POS_FIX_NONE to POS_FIX_LPIB to represent its real role better. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-28[ALSA] Improve the slots option handlingTakashi Iwai
Fix and improve the slots option handling. The sound core tries to find the slot with the given module name first and assign if it's still available. If all pre-given slots are unavailable, then try to find another free slot. Also, when a module name begins with '!', it means the negative match: the slot will be given for any modules but that one. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - Add ALC663 supportKailang Yang
Added the support of ALC663 codec, including specific models for ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSETakashi Iwai
Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE to represent its meaning more better. This config isn't provided only for the detection but for more verbose debug prints in general. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-29[ALSA] hda - Add support of Medion RIM 2150Takashi Iwai
Added the support of Medion RIM 2150 laptop with ALC880 codec. ALSA bug#3708: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3708 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda - Add support of AD1989A/AD1989BTakashi Iwai
Added the support of AD1989A and AD1989B codecs. These codecs can have multiple SPDIF devices, but currently we handle only one SPDIF. If any real devices with two SPDIF interfaces (likely one for SPDIF and one for HDMI), we'll fix this rightly. Otherwise, these codecs are pretty similar with AD1988. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-intel: Add Quanta IL1 ALC267 modelHerton Ronaldo Krzesinski
This adds support for Quanta IL1 mini-notebook to alsa, defining a new model for it. It comes with an ALC267 codec chip. Some notes about this model: * In headphone automute, I use AC_VERB_SET_PIN_WIDGET_CONTROL instead of common amp mute, to avoid conflict with mixer switch (mixer and automute use the same nid). * The only connected capture sources in the hardware are the internal mic and external mic jack. So instead of using an input source selector like on other ALC268 models, the mic automute automatically switch between captures. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Support mic automute for Clevo M720R/SRHerton Ronaldo Krzesinski
Add support for mic automute in clevo-m720r ALC883 model, and rename it to more generic clevo-m720. Also change model entry in ALSA-Configuration.txt accordingly. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Add missing models in ALSA-Configuration.txtTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Remove now uneeded 6stack-hp model from ALC883Herton Ronaldo Krzesinski
After DAC assignment fix in ALC883, the 6stack-hp model is now the same as 6stack-dig. So just remove 6stack-hp model and replace its use with 6stack-dig. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Support of Lenovo Thinkpad X300Takashi Iwai
Added the model thinkpad for Lenovo Thinkpad X300 with AD1984A codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Fix spekaer output of Panasonic CF-74Takashi Iwai
Add a new model "panasonic" for Panasonic CF-74 with STAC9200 codec to fix the speaker output. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] pcsp: add descriptionStas Sergeev
update ALSA-Configuration.txt Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Add missing descriptions for STAC codec modelsTakashi Iwai
Added the missing descriptions for STAC codec models. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] Add description of aw2 driverTakashi Iwai
Added a brief description of aw2 driver to ALSA-Configuration.txt. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Add model=mobile for AD1884A & coTakashi Iwai
Added the new model mobile for AD1884A and compatible codecs. It's a reduced version of model=laptop. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Add support of AD1883/1884A/1984A/1984BTakashi Iwai
Added the support of new AD codecs: AD1883, AD1884A, AD1984A and AD1984B. These are almost compatible except for additional digital pins, etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Add support of Zepto laptopsMirco Tischler
Adds support for zepto laptops with alc268 intel_hda codec. Signed-off-by: Mirco Tischler <mt-ml@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-01-31[ALSA] hda-codec - Add Dell T3400 supportDouglas Kosovic
Added the support for Dell T3400 with AD1984 codec chip. ALSA bug#3699: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3699 Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add Conexant 5051 codec supportTakashi Iwai
Added the support for Conexant 5051 audio codec. Right now there are two preset models, laptop and hp. The whole patch is based on the information from the base patch by Linuxant. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] add TempoTec HiFier driverClemens Ladisch
Add a driver for the MediaTek/TempoTec HiFier Fantasia sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ASoC documentation updatesMark Brown
Update the ASoC documentation. Along with minor formatting and grammar cleanups it moves the ASoC overview into the present tense to reflect the fact that it has now been merged. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Fix laptop models for Cxt5045Marc Boucher
Change laptop models to three different models, laptop-hpsense, laptop-micsense and laptop-hpmicsense. The first two correspond to the old 'laptop' and 'fujitsu' models. Reassigned the quirk table for the new models. Signed-off-by: Marc Boucher <marc@linuxant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: TempoTec HiFier is probably not supportedClemens Ladisch
The TempoTec HiFier has a somwhat different architecture; remove it from the list of cards that are known to be supported. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: update ALSA-Configuration.txtClemens Ladisch
Add documentation entries for snd-oxygen and snd-virtuoso. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - New model for conexant 5045 codec to support benq r55eJiang Zhe
The benq r55e laptop have 3 jacks on the front panel. One for HP, one for Line In and one for Mic In. This patch implemented a new model to support it. Signed-off-by: Jiang Zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Add missing model for HD-audio Cx5045 codecTakashi Iwai
Added the description of the model fujitsu for Cx5045 codec chip. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add the support of Dell OEM laptops with ALC268Takashi Iwai
Added the support of Dell OEM laptops (Vostro 1200) with ALC268 codec. The new model=dell is provided. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Fix 5.1 sound in Dell 6stack ALC888 HDAClaudio Matsuoka
This patch fixes 5.1 surround output and headphone detection in the Dell Inspiron 530 and possibly other Dell systems using the ALC888 codec (mode 6stack-dell). Signed-off-by: Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Update realtek codec supportKailang Yang
1. Support HP rp5700 2. Fixed alc_subsystem_id function (Bug fixed and support Desktop) 3. Support ASUS EP20 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove PCM xfer_align sw paramsTakashi Iwai
The xfer_align sw_params parameter has never been used in a sane manner, and no one understands what this does exactly. The current implementation looks also buggy because it allows write of shorter size than xfer_align. So, if you do partial writes, the write isn't actually aligned at all. Removing this parameter will make some pcm_lib_* code more readable (and less buggy). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add test model for ALC268Jonathan Woithe
This implements a test model for the ALC268. It depends on the feature added by alc260-test-eapd-0.2.diff. This patch also adds a mention of the ALC260 test model to ALSA-Configuration.txt since this seems to have been missed. Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-intel - Support multiple devicesTakashi Iwai
It turned out that there can be multiple HD-audio devices on a single machine (e.g. on-board audio and HDMI on graphic cards), so we need to support multiple devices with snd-hda-intel driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Initial support of the Mitac 8252D (based on ALC883)Andy Shevchenko
The attached patch adds initial support of the Mitac 8252D (http://www.mitac-mtc.com.tw/English/products/8252Dspec.htm). Working: - Front speakers (volume + mute) - Center/LFE speakers (volume + mute) - HP out (with Front Volume) - HP individual mute switch - HP Jack sense - Front Mic and its volume Not tested: - external mic and its volume Not working while now: - Mic Jack sense Questionable: - is Mic have Jack sense? - one or two Mic volume controls? - CD/Line-in: presense in the mixer Signed-off-by: Andy Shevchenko <andy@smile.org.ua> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Update descriptions of isapnp-specific module optionsRene Herman
Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] sound/isa: kill pnp_resource_changeRene Herman
This removes the pnp_resource_change use from the ALSA ISAPnP drivers. In 2.4 these were useful in providing an easy path to setting the resources, but in 2.6 they retain function as a layering violation only. This makes for a nice cleanup (-550 lines) of ALSA but moreover, ALSA is the only remaining user of pnp_init_resource_table(), pnp_resource_change() and pnp_manual_config_dev() (and, in fact, of 'struct pnp_resource_table') in the tree outide of drivers/pnp itself meaning it makes for more cleanup potential inside the PnP layer. Thomas Renninger acked their removal from that side, you did from the ALSA side (CC list just copied from that thread). Against current alsa-kernel HG. Many more potential cleanups in there, but this _only_ removes the pnp_resource_change code. Compile tested against current alsa-kernel HG and compile- and use-tested against 2.6.23.x (few offsets). Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add model=hp-tc-t5735 for ALC262Takashi Iwai
Added the missing model string for the new support of HP TC T5735. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Introduce slots option to snd moduleTakashi Iwai
Introduced the global 'slots' option to snd module. This option provides an alternative way to handle the order of multiple sound card instances. It's an easier approach to avoid conflict with hotplug devices, and can be used together with the existing 'order' option of each card driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] HDA: Add support for Samsung Q1 Ultra Vista editionTobin Davis
This patch adds full record and playback support for the Samsung Q1 Ultra - Vista model (different codec than the earlier Q1 Ultra models). Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] writing-an-alsa-driver.tmpl: English style improvementsMichael Opdenacker
This patch brings some English style improvements throughout the document, as well as 1 or 2 extra technical details. Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ice1724 - Add support of Onkyo SE-90PCI and SE-200PCIShin-ya Okada
Added the support for Onkyo SE-90PCI and SE-200PCI boards. Signed-off-by: Shin-ya Okada <sh_okada at d4.dion.ne.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add missing eeepc-p701 model for ALC662Takashi Iwai
Added the missing model string 'eeepc-p701' for ALC662 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-20typo fixesMatt LaPlante
Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>