| Age | Commit message (Collapse) | Author |
|---|
|
Bring the devices.txt back into some relationship with reality. Update the
documentation a bit.
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: remove compat stuff
HID: constify arrays of struct apple_key_translation
HID: add support for Kye/Genius Ergo 525V
HID: Support Apple mini aluminum keyboard
HID: support for Kensington slimblade device
HID: DragonRise game controller force feedback driver
HID: add support for another version of 0e8f:0003 device in hid-pl
HID: fix race between usb_register_dev() and hiddev_open()
HID: bring back possibility to specify vid/pid ignore on module load
HID: make HID_DEBUG defaults consistent
HID: autosuspend -- fix lockup of hid on reset
HID: hid_reset_resume() needs to be defined only when CONFIG_PM is set
HID: fix USB HID devices after STD with autosuspend
HID: do not try to compile PM code with CONFIG_PM unset
HID: autosuspend support for USB HID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
trivial: Update my email address
trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
trivial: Fix misspelling of "Celsius".
trivial: remove unused variable 'path' in alloc_file()
trivial: fix a pdlfush -> pdflush typo in comment
trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
trivial: wusb: Storage class should be before const qualifier
trivial: drivers/char/bsr.c: Storage class should be before const qualifier
trivial: h8300: Storage class should be before const qualifier
trivial: fix where cgroup documentation is not correctly referred to
trivial: Give the right path in Documentation example
trivial: MTD: remove EOL from MODULE_DESCRIPTION
trivial: Fix typo in bio_split()'s documentation
trivial: PWM: fix of #endif comment
trivial: fix typos/grammar errors in Kconfig texts
trivial: Fix misspelling of firmware
trivial: cgroups: documentation typo and spelling corrections
trivial: Update contact info for Jochen Hein
trivial: fix typo "resgister" -> "register"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (32 commits)
regulator: twl4030 VAUX3 supports 3.0V
regulator: Support disabling of unused regulators by machines
regulator: Don't increment use_count for boot_on regulators
twl4030-regulator: expose VPLL2
regulator: refcount fixes
regulator: Don't warn if we failed to get a regulator
regulator: Allow boot_on regulators to be disabled by clients
regulator: Implement list_voltage for WM835x LDOs and DCDCs
twl4030-regulator: list more VAUX4 voltages
regulator: Don't warn on omitted voltage constraints
regulator: Implement list_voltage() for WM8400 DCDCs and LDOs
MMC: regulator utilities
regulator: twl4030 voltage enumeration (v2)
regulator: twl4030 regulators
regulator: get_status() grows kerneldoc
regulator: enumerate voltages (v2)
regulator: Fix get_mode() for WM835x DCDCs
regulator: Allow regulators to set the initial operating mode
regulator: Suggest use of datasheet supply or pin names for consumers
regulator: email - update email address and regulator webpage.
...
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-fscache: (41 commits)
NFS: Add mount options to enable local caching on NFS
NFS: Display local caching state
NFS: Store pages from an NFS inode into a local cache
NFS: Read pages from FS-Cache into an NFS inode
NFS: nfs_readpage_async() needs to be accessible as a fallback for local caching
NFS: Add read context retention for FS-Cache to call back with
NFS: FS-Cache page management
NFS: Add some new I/O counters for FS-Cache doing things for NFS
NFS: Invalidate FsCache page flags when cache removed
NFS: Use local disk inode cache
NFS: Define and create inode-level cache objects
NFS: Define and create superblock-level objects
NFS: Define and create server-level objects
NFS: Register NFS for caching and retrieve the top-level index
NFS: Permit local filesystem caching to be enabled for NFS
NFS: Add FS-Cache option bit and debug bit
NFS: Add comment banners to some NFS functions
FS-Cache: Make kAFS use FS-Cache
CacheFiles: A cache that backs onto a mounted filesystem
CacheFiles: Export things for CacheFiles
...
|
|
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
fs: Add exofs to Kernel build
exofs: Documentation
exofs: export_operations
exofs: super_operations and file_system_type
exofs: dir_inode and directory operations
exofs: address_space_operations
exofs: symlink_inode and fast_symlink_inode operations
exofs: file and file_inode operations
exofs: Kbuild, Headers and osd utils
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
udf: Don't write integrity descriptor too often
udf: Try anchor in block 256 first
udf: Some type fixes and cleanups
udf: use hardware sector size
udf: fix novrs mount option
udf: Fix oops when invalid character in filename occurs
udf: return f_fsid for statfs(2)
udf: Add checks to not underflow sector_t
udf: fix default mode and dmode options handling
udf: fix sparse warnings:
udf: unsigned last[i] cannot be less than 0
udf: implement mode and dmode mounting options
udf: reduce stack usage of udf_get_filename
udf: reduce stack usage of udf_load_pvoldesc
Fix the udf code not to pass structs on stack where possible.
Remove struct typedefs from fs/udf/ecma_167.h et al.
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/rcu-doc-2.6:
Doc: Fix spelling in RCU/rculist_nulls.txt.
Doc: Fix wrong API example usage of call_rcu().
Doc: Fix missing whitespaces in RCU documentation.
|
|
* 'for-linus' of git://neil.brown.name/md: (53 commits)
md/raid5 revise rules for when to update metadata during reshape
md/raid5: minor code cleanups in make_request.
md: remove CONFIG_MD_RAID_RESHAPE config option.
md/raid5: be more careful about write ordering when reshaping.
md: don't display meaningless values in sysfs files resync_start and sync_speed
md/raid5: allow layout and chunksize to be changed on active array.
md/raid5: reshape using largest of old and new chunk size
md/raid5: prepare for allowing reshape to change layout
md/raid5: prepare for allowing reshape to change chunksize.
md/raid5: clearly differentiate 'before' and 'after' stripes during reshape.
Documentation/md.txt update
md: allow number of drives in raid5 to be reduced
md/raid5: change reshape-progress measurement to cope with reshaping backwards.
md: add explicit method to signal the end of a reshape.
md/raid5: enhance raid5_size to work correctly with negative delta_disks
md/raid5: drop qd_idx from r6_state
md/raid6: move raid6 data processing to raid6_pq.ko
md: raid5 run(): Fix max_degraded for raid level 4.
md: 'array_size' sysfs attribute
md: centralize ->array_sectors modifications
...
|
|
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] fix build-breaking 7a192ec commit
ARM: Add SMSC911X support to Overo platform (V2)
arm: update omap_ldp defconfig to use smsc911x
arm: update realview defconfigs to use smsc911x
arm: update pcm037 defconfig to use smsc911x
arm: convert omap ldp platform to use smsc911x
arm: convert realview platform to use smsc911x
arm: convert pcm037 platform to use smsc911x
[ARM] 5444/1: ARM: Realview: Fix event-device multiplicators in localtimer.c
[ARM] 5442/1: pxa/cm-x255: fix reverse RDY gpios in PCMCIA driver
[ARM] 5441/1: Use pr_err on error paths in at91 pm
[ARM] 5440/1: Fix VFP state corruption due to preemption during VFP exceptions
[ARM] 5439/1: Do not clear bit 10 of DFSR during abort handling on ARMv6
[ARM] 5437/1: Add documentation for "nohlt" kernel parameter
[ARM] 5436/1: ARM: OMAP: Fix compile for rx51
[ARM] arch_reset() now takes a second parameter
[ARM] Kirkwood: small L2 code cleanup
[ARM] Kirkwood: invalidate L2 cache before enabling it
|
|
Add an FS-Cache cache-backend that permits a mounted filesystem to be used as a
backing store for the cache.
CacheFiles uses a userspace daemon to do some of the cache management - such as
reaping stale nodes and culling. This is called cachefilesd and lives in
/sbin. The source for the daemon can be downloaded from:
http://people.redhat.com/~dhowells/cachefs/cachefilesd.c
And an example configuration from:
http://people.redhat.com/~dhowells/cachefs/cachefilesd.conf
The filesystem and data integrity of the cache are only as good as those of the
filesystem providing the backing services. Note that CacheFiles does not
attempt to journal anything since the journalling interfaces of the various
filesystems are very specific in nature.
CacheFiles creates a misc character device - "/dev/cachefiles" - that is used
to communication with the daemon. Only one thing may have this open at once,
and whilst it is open, a cache is at least partially in existence. The daemon
opens this and sends commands down it to control the cache.
CacheFiles is currently limited to a single cache.
CacheFiles attempts to maintain at least a certain percentage of free space on
the filesystem, shrinking the cache by culling the objects it contains to make
space if necessary - see the "Cache Culling" section. This means it can be
placed on the same medium as a live set of data, and will expand to make use of
spare space and automatically contract when the set of data requires more
space.
============
REQUIREMENTS
============
The use of CacheFiles and its daemon requires the following features to be
available in the system and in the cache filesystem:
- dnotify.
- extended attributes (xattrs).
- openat() and friends.
- bmap() support on files in the filesystem (FIBMAP ioctl).
- The use of bmap() to detect a partial page at the end of the file.
It is strongly recommended that the "dir_index" option is enabled on Ext3
filesystems being used as a cache.
=============
CONFIGURATION
=============
The cache is configured by a script in /etc/cachefilesd.conf. These commands
set up cache ready for use. The following script commands are available:
(*) brun <N>%
(*) bcull <N>%
(*) bstop <N>%
(*) frun <N>%
(*) fcull <N>%
(*) fstop <N>%
Configure the culling limits. Optional. See the section on culling
The defaults are 7% (run), 5% (cull) and 1% (stop) respectively.
The commands beginning with a 'b' are file space (block) limits, those
beginning with an 'f' are file count limits.
(*) dir <path>
Specify the directory containing the root of the cache. Mandatory.
(*) tag <name>
Specify a tag to FS-Cache to use in distinguishing multiple caches.
Optional. The default is "CacheFiles".
(*) debug <mask>
Specify a numeric bitmask to control debugging in the kernel module.
Optional. The default is zero (all off). The following values can be
OR'd into the mask to collect various information:
1 Turn on trace of function entry (_enter() macros)
2 Turn on trace of function exit (_leave() macros)
4 Turn on trace of internal debug points (_debug())
This mask can also be set through sysfs, eg:
echo 5 >/sys/modules/cachefiles/parameters/debug
==================
STARTING THE CACHE
==================
The cache is started by running the daemon. The daemon opens the cache device,
configures the cache and tells it to begin caching. At that point the cache
binds to fscache and the cache becomes live.
The daemon is run as follows:
/sbin/cachefilesd [-d]* [-s] [-n] [-f <configfile>]
The flags are:
(*) -d
Increase the debugging level. This can be specified multiple times and
is cumulative with itself.
(*) -s
Send messages to stderr instead of syslog.
(*) -n
Don't daemonise and go into background.
(*) -f <configfile>
Use an alternative configuration file rather than the default one.
===============
THINGS TO AVOID
===============
Do not mount other things within the cache as this will cause problems. The
kernel module contains its own very cut-down path walking facility that ignores
mountpoints, but the daemon can't avoid them.
Do not create, rename or unlink files and directories in the cache whilst the
cache is active, as this may cause the state to become uncertain.
Renaming files in the cache might make objects appear to be other objects (the
filename is part of the lookup key).
Do not change or remove the extended attributes attached to cache files by the
cache as this will cause the cache state management to get confused.
Do not create files or directories in the cache, lest the cache get confused or
serve incorrect data.
Do not chmod files in the cache. The module creates things with minimal
permissions to prevent random users being able to access them directly.
=============
CACHE CULLING
=============
The cache may need culling occasionally to make space. This involves
discarding objects from the cache that have been used less recently than
anything else. Culling is based on the access time of data objects. Empty
directories are culled if not in use.
Cache culling is done on the basis of the percentage of blocks and the
percentage of files available in the underlying filesystem. There are six
"limits":
(*) brun
(*) frun
If the amount of free space and the number of available files in the cache
rises above both these limits, then culling is turned off.
(*) bcull
(*) fcull
If the amount of available space or the number of available files in the
cache falls below either of these limits, then culling is started.
(*) bstop
(*) fstop
If the amount of available space or the number of available files in the
cache falls below either of these limits, then no further allocation of
disk space or files is permitted until culling has raised things above
these limits again.
These must be configured thusly:
0 <= bstop < bcull < brun < 100
0 <= fstop < fcull < frun < 100
Note that these are percentages of available space and available files, and do
_not_ appear as 100 minus the percentage displayed by the "df" program.
The userspace daemon scans the cache to build up a table of cullable objects.
These are then culled in least recently used order. A new scan of the cache is
started as soon as space is made in the table. Objects will be skipped if
their atimes have changed or if the kernel module says it is still using them.
===============
CACHE STRUCTURE
===============
The CacheFiles module will create two directories in the directory it was
given:
(*) cache/
(*) graveyard/
The active cache objects all reside in the first directory. The CacheFiles
kernel module moves any retired or culled objects that it can't simply unlink
to the graveyard from which the daemon will actually delete them.
The daemon uses dnotify to monitor the graveyard directory, and will delete
anything that appears therein.
The module represents index objects as directories with the filename "I..." or
"J...". Note that the "cache/" directory is itself a special index.
Data objects are represented as files if they have no children, or directories
if they do. Their filenames all begin "D..." or "E...". If represented as a
directory, data objects will have a file in the directory called "data" that
actually holds the data.
Special objects are similar to data objects, except their filenames begin
"S..." or "T...".
If an object has children, then it will be represented as a directory.
Immediately in the representative directory are a collection of directories
named for hash values of the child object keys with an '@' prepended. Into
this directory, if possible, will be placed the representations of the child
objects:
INDEX INDEX INDEX DATA FILES
========= ========== ================================= ================
cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400
cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...DB1ry
cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...N22ry
cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...FP1ry
If the key is so long that it exceeds NAME_MAX with the decorations added on to
it, then it will be cut into pieces, the first few of which will be used to
make a nest of directories, and the last one of which will be the objects
inside the last directory. The names of the intermediate directories will have
'+' prepended:
J1223/@23/+xy...z/+kl...m/Epqr
Note that keys are raw data, and not only may they exceed NAME_MAX in size,
they may also contain things like '/' and NUL characters, and so they may not
be suitable for turning directly into a filename.
To handle this, CacheFiles will use a suitably printable filename directly and
"base-64" encode ones that aren't directly suitable. The two versions of
object filenames indicate the encoding:
OBJECT TYPE PRINTABLE ENCODED
=============== =============== ===============
Index "I..." "J..."
Data "D..." "E..."
Special "S..." "T..."
Intermediate directories are always "@" or "+" as appropriate.
Each object in the cache has an extended attribute label that holds the object
type ID (required to distinguish special objects) and the auxiliary data from
the netfs. The latter is used to detect stale objects in the cache and update
or retire them.
Note that CacheFiles will erase from the cache any file it doesn't recognise or
any file of an incorrect type (such as a FIFO file or a device file).
==========================
SECURITY MODEL AND SELINUX
==========================
CacheFiles is implemented to deal properly with the LSM security features of
the Linux kernel and the SELinux facility.
One of the problems that CacheFiles faces is that it is generally acting on
behalf of a process, and running in that process's context, and that includes a
security context that is not appropriate for accessing the cache - either
because the files in the cache are inaccessible to that process, or because if
the process creates a file in the cache, that file may be inaccessible to other
processes.
The way CacheFiles works is to temporarily change the security context (fsuid,
fsgid and actor security label) that the process acts as - without changing the
security context of the process when it the target of an operation performed by
some other process (so signalling and suchlike still work correctly).
When the CacheFiles module is asked to bind to its cache, it:
(1) Finds the security label attached to the root cache directory and uses
that as the security label with which it will create files. By default,
this is:
cachefiles_var_t
(2) Finds the security label of the process which issued the bind request
(presumed to be the cachefilesd daemon), which by default will be:
cachefilesd_t
and asks LSM to supply a security ID as which it should act given the
daemon's label. By default, this will be:
cachefiles_kernel_t
SELinux transitions the daemon's security ID to the module's security ID
based on a rule of this form in the policy.
type_transition <daemon's-ID> kernel_t : process <module's-ID>;
For instance:
type_transition cachefilesd_t kernel_t : process cachefiles_kernel_t;
The module's security ID gives it permission to create, move and remove files
and directories in the cache, to find and access directories and files in the
cache, to set and access extended attributes on cache objects, and to read and
write files in the cache.
The daemon's security ID gives it only a very restricted set of permissions: it
may scan directories, stat files and erase files and directories. It may
not read or write files in the cache, and so it is precluded from accessing the
data cached therein; nor is it permitted to create new files in the cache.
There are policy source files available in:
http://people.redhat.com/~dhowells/fscache/cachefilesd-0.8.tar.bz2
and later versions. In that tarball, see the files:
cachefilesd.te
cachefilesd.fc
cachefilesd.if
They are built and installed directly by the RPM.
If a non-RPM based system is being used, then copy the above files to their own
directory and run:
make -f /usr/share/selinux/devel/Makefile
semodule -i cachefilesd.pp
You will need checkpolicy and selinux-policy-devel installed prior to the
build.
By default, the cache is located in /var/fscache, but if it is desirable that
it should be elsewhere, than either the above policy files must be altered, or
an auxiliary policy must be installed to label the alternate location of the
cache.
For instructions on how to add an auxiliary policy to enable the cache to be
located elsewhere when SELinux is in enforcing mode, please see:
/usr/share/doc/cachefilesd-*/move-cache.txt
When the cachefilesd rpm is installed; alternatively, the document can be found
in the sources.
==================
A NOTE ON SECURITY
==================
CacheFiles makes use of the split security in the task_struct. It allocates
its own task_security structure, and redirects current->act_as to point to it
when it acts on behalf of another process, in that process's context.
The reason it does this is that it calls vfs_mkdir() and suchlike rather than
bypassing security and calling inode ops directly. Therefore the VFS and LSM
may deny the CacheFiles access to the cache data because under some
circumstances the caching code is running in the security context of whatever
process issued the original syscall on the netfs.
Furthermore, should CacheFiles create a file or directory, the security
parameters with that object is created (UID, GID, security label) would be
derived from that process that issued the system call, thus potentially
preventing other processes from accessing the cache - including CacheFiles's
cache management daemon (cachefilesd).
What is required is to temporarily override the security of the process that
issued the system call. We can't, however, just do an in-place change of the
security data as that affects the process as an object, not just as a subject.
This means it may lose signals or ptrace events for example, and affects what
the process looks like in /proc.
So CacheFiles makes use of a logical split in the security between the
objective security (task->sec) and the subjective security (task->act_as). The
objective security holds the intrinsic security properties of a process and is
never overridden. This is what appears in /proc, and is what is used when a
process is the target of an operation by some other process (SIGKILL for
example).
The subjective security holds the active security properties of a process, and
may be overridden. This is not seen externally, and is used whan a process
acts upon another object, for example SIGKILLing another process or opening a
file.
LSM hooks exist that allow SELinux (or Smack or whatever) to reject a request
for CacheFiles to run in a context of a specific security label, or to create
files and directories with another security label.
This documentation is added by the patch to:
Documentation/filesystems/caching/cachefiles.txt
Signed-Off-By: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
|
Add and document asynchronous operation handling for use by FS-Cache's data
storage and retrieval routines.
The following documentation is added to:
Documentation/filesystems/caching/operations.txt
================================
ASYNCHRONOUS OPERATIONS HANDLING
================================
========
OVERVIEW
========
FS-Cache has an asynchronous operations handling facility that it uses for its
data storage and retrieval routines. Its operations are represented by
fscache_operation structs, though these are usually embedded into some other
structure.
This facility is available to and expected to be be used by the cache backends,
and FS-Cache will create operations and pass them off to the appropriate cache
backend for completion.
To make use of this facility, <linux/fscache-cache.h> should be #included.
===============================
OPERATION RECORD INITIALISATION
===============================
An operation is recorded in an fscache_operation struct:
struct fscache_operation {
union {
struct work_struct fast_work;
struct slow_work slow_work;
};
unsigned long flags;
fscache_operation_processor_t processor;
...
};
Someone wanting to issue an operation should allocate something with this
struct embedded in it. They should initialise it by calling:
void fscache_operation_init(struct fscache_operation *op,
fscache_operation_release_t release);
with the operation to be initialised and the release function to use.
The op->flags parameter should be set to indicate the CPU time provision and
the exclusivity (see the Parameters section).
The op->fast_work, op->slow_work and op->processor flags should be set as
appropriate for the CPU time provision (see the Parameters section).
FSCACHE_OP_WAITING may be set in op->flags prior to each submission of the
operation and waited for afterwards.
==========
PARAMETERS
==========
There are a number of parameters that can be set in the operation record's flag
parameter. There are three options for the provision of CPU time in these
operations:
(1) The operation may be done synchronously (FSCACHE_OP_MYTHREAD). A thread
may decide it wants to handle an operation itself without deferring it to
another thread.
This is, for example, used in read operations for calling readpages() on
the backing filesystem in CacheFiles. Although readpages() does an
asynchronous data fetch, the determination of whether pages exist is done
synchronously - and the netfs does not proceed until this has been
determined.
If this option is to be used, FSCACHE_OP_WAITING must be set in op->flags
before submitting the operation, and the operating thread must wait for it
to be cleared before proceeding:
wait_on_bit(&op->flags, FSCACHE_OP_WAITING,
fscache_wait_bit, TASK_UNINTERRUPTIBLE);
(2) The operation may be fast asynchronous (FSCACHE_OP_FAST), in which case it
will be given to keventd to process. Such an operation is not permitted
to sleep on I/O.
This is, for example, used by CacheFiles to copy data from a backing fs
page to a netfs page after the backing fs has read the page in.
If this option is used, op->fast_work and op->processor must be
initialised before submitting the operation:
INIT_WORK(&op->fast_work, do_some_work);
(3) The operation may be slow asynchronous (FSCACHE_OP_SLOW), in which case it
will be given to the slow work facility to process. Such an operation is
permitted to sleep on I/O.
This is, for example, used by FS-Cache to handle background writes of
pages that have just been fetched from a remote server.
If this option is used, op->slow_work and op->processor must be
initialised before submitting the operation:
fscache_operation_init_slow(op, processor)
Furthermore, operations may be one of two types:
(1) Exclusive (FSCACHE_OP_EXCLUSIVE). Operations of this type may not run in
conjunction with any other operation on the object being operated upon.
An example of this is the attribute change operation, in which the file
being written to may need truncation.
(2) Shareable. Operations of this type may be running simultaneously. It's
up to the operation implementation to prevent interference between other
operations running at the same time.
=========
PROCEDURE
=========
Operations are used through the following procedure:
(1) The submitting thread must allocate the operation and initialise it
itself. Normally this would be part of a more specific structure with the
generic op embedded within.
(2) The submitting thread must then submit the operation for processing using
one of the following two functions:
int fscache_submit_op(struct fscache_object *object,
struct fscache_operation *op);
int fscache_submit_exclusive_op(struct fscache_object *object,
struct fscache_operation *op);
The first function should be used to submit non-exclusive ops and the
second to submit exclusive ones. The caller must still set the
FSCACHE_OP_EXCLUSIVE flag.
If successful, both functions will assign the operation to the specified
object and return 0. -ENOBUFS will be returned if the object specified is
permanently unavailable.
The operation manager will defer operations on an object that is still
undergoing lookup or creation. The operation will also be deferred if an
operation of conflicting exclusivity is in progress on the object.
If the operation is asynchronous, the manager will retain a reference to
it, so the caller should put their reference to it by passing it to:
void fscache_put_operation(struct fscache_operation *op);
(3) If the submitting thread wants to do the work itself, and has marked the
operation with FSCACHE_OP_MYTHREAD, then it should monitor
FSCACHE_OP_WAITING as described above and check the state of the object if
necessary (the object might have died whilst the thread was waiting).
When it has finished doing its processing, it should call
fscache_put_operation() on it.
(4) The operation holds an effective lock upon the object, preventing other
exclusive ops conflicting until it is released. The operation can be
enqueued for further immediate asynchronous processing by adjusting the
CPU time provisioning option if necessary, eg:
op->flags &= ~FSCACHE_OP_TYPE;
op->flags |= ~FSCACHE_OP_FAST;
and calling:
void fscache_enqueue_operation(struct fscache_operation *op)
This can be used to allow other things to have use of the worker thread
pools.
=====================
ASYNCHRONOUS CALLBACK
=====================
When used in asynchronous mode, the worker thread pool will invoke the
processor method with a pointer to the operation. This should then get at the
container struct by using container_of():
static void fscache_write_op(struct fscache_operation *_op)
{
struct fscache_storage *op =
container_of(_op, struct fscache_storage, op);
...
}
The caller holds a reference on the operation, and will invoke
fscache_put_operation() when the processor function returns. The processor
function is at liberty to call fscache_enqueue_operation() or to take extra
references.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
|
Implement the cache object management state machine.
The following documentation is added to illuminate the working of this state
machine. It will also be added as:
Documentation/filesystems/caching/object.txt
====================================================
IN-KERNEL CACHE OBJECT REPRESENTATION AND MANAGEMENT
====================================================
==============
REPRESENTATION
==============
FS-Cache maintains an in-kernel representation of each object that a netfs is
currently interested in. Such objects are represented by the fscache_cookie
struct and are referred to as cookies.
FS-Cache also maintains a separate in-kernel representation of the objects that
a cache backend is currently actively caching. Such objects are represented by
the fscache_object struct. The cache backends allocate these upon request, and
are expected to embed them in their own representations. These are referred to
as objects.
There is a 1:N relationship between cookies and objects. A cookie may be
represented by multiple objects - an index may exist in more than one cache -
or even by no objects (it may not be cached).
Furthermore, both cookies and objects are hierarchical. The two hierarchies
correspond, but the cookies tree is a superset of the union of the object trees
of multiple caches:
NETFS INDEX TREE : CACHE 1 : CACHE 2
: :
: +-----------+ :
+----------->| IObject | :
+-----------+ | : +-----------+ :
| ICookie |-------+ : | :
+-----------+ | : | : +-----------+
| +------------------------------>| IObject |
| : | : +-----------+
| : V : |
| : +-----------+ : |
V +----------->| IObject | : |
+-----------+ | : +-----------+ : |
| ICookie |-------+ : | : V
+-----------+ | : | : +-----------+
| +------------------------------>| IObject |
+-----+-----+ : | : +-----------+
| | : | : |
V | : V : |
+-----------+ | : +-----------+ : |
| ICookie |------------------------->| IObject | : |
+-----------+ | : +-----------+ : |
| V : | : V
| +-----------+ : | : +-----------+
| | ICookie |-------------------------------->| IObject |
| +-----------+ : | : +-----------+
V | : V : |
+-----------+ | : +-----------+ : |
| DCookie |------------------------->| DObject | : |
+-----------+ | : +-----------+ : |
| : : |
+-------+-------+ : : |
| | : : |
V V : : V
+-----------+ +-----------+ : : +-----------+
| DCookie | | DCookie |------------------------>| DObject |
+-----------+ +-----------+ : : +-----------+
: :
In the above illustration, ICookie and IObject represent indices and DCookie
and DObject represent data storage objects. Indices may have representation in
multiple caches, but currently, non-index objects may not. Objects of any type
may also be entirely unrepresented.
As far as the netfs API goes, the netfs is only actually permitted to see
pointers to the cookies. The cookies themselves and any objects attached to
those cookies are hidden from it.
===============================
OBJECT MANAGEMENT STATE MACHINE
===============================
Within FS-Cache, each active object is managed by its own individual state
machine. The state for an object is kept in the fscache_object struct, in
object->state. A cookie may point to a set of objects that are in different
states.
Each state has an action associated with it that is invoked when the machine
wakes up in that state. There are four logical sets of states:
(1) Preparation: states that wait for the parent objects to become ready. The
representations are hierarchical, and it is expected that an object must
be created or accessed with respect to its parent object.
(2) Initialisation: states that perform lookups in the cache and validate
what's found and that create on disk any missing metadata.
(3) Normal running: states that allow netfs operations on objects to proceed
and that update the state of objects.
(4) Termination: states that detach objects from their netfs cookies, that
delete objects from disk, that handle disk and system errors and that free
up in-memory resources.
In most cases, transitioning between states is in response to signalled events.
When a state has finished processing, it will usually set the mask of events in
which it is interested (object->event_mask) and relinquish the worker thread.
Then when an event is raised (by calling fscache_raise_event()), if the event
is not masked, the object will be queued for processing (by calling
fscache_enqueue_object()).
PROVISION OF CPU TIME
---------------------
The work to be done by the various states is given CPU time by the threads of
the slow work facility (see Documentation/slow-work.txt). This is used in
preference to the workqueue facility because:
(1) Threads may be completely occupied for very long periods of time by a
particular work item. These state actions may be doing sequences of
synchronous, journalled disk accesses (lookup, mkdir, create, setxattr,
getxattr, truncate, unlink, rmdir, rename).
(2) Threads may do little actual work, but may rather spend a lot of time
sleeping on I/O. This means that single-threaded and 1-per-CPU-threaded
workqueues don't necessarily have the right numbers of threads.
LOCKING SIMPLIFICATION
----------------------
Because only one worker thread may be operating on any particular object's
state machine at once, this simplifies the locking, particularly with respect
to disconnecting the netfs's representation of a cache object (fscache_cookie)
from the cache backend's representation (fscache_object) - which may be
requested from either end.
=================
THE SET OF STATES
=================
The object state machine has a set of states that it can be in. There are
preparation states in which the object sets itself up and waits for its parent
object to transit to a state that allows access to its children:
(1) State FSCACHE_OBJECT_INIT.
Initialise the object and wait for the parent object to become active. In
the cache, it is expected that it will not be possible to look an object
up from the parent object, until that parent object itself has been looked
up.
There are initialisation states in which the object sets itself up and accesses
disk for the object metadata:
(2) State FSCACHE_OBJECT_LOOKING_UP.
Look up the object on disk, using the parent as a starting point.
FS-Cache expects the cache backend to probe the cache to see whether this
object is represented there, and if it is, to see if it's valid (coherency
management).
The cache should call fscache_object_lookup_negative() to indicate lookup
failure for whatever reason, and should call fscache_obtained_object() to
indicate success.
At the completion of lookup, FS-Cache will let the netfs go ahead with
read operations, no matter whether the file is yet cached. If not yet
cached, read operations will be immediately rejected with ENODATA until
the first known page is uncached - as to that point there can be no data
to be read out of the cache for that file that isn't currently also held
in the pagecache.
(3) State FSCACHE_OBJECT_CREATING.
Create an object on disk, using the parent as a starting point. This
happens if the lookup failed to find the object, or if the object's
coherency data indicated what's on disk is out of date. In this state,
FS-Cache expects the cache to create
The cache should call fscache_obtained_object() if creation completes
successfully, fscache_object_lookup_negative() otherwise.
At the completion of creation, FS-Cache will start processing write
operations the netfs has queued for an object. If creation failed, the
write ops will be transparently discarded, and nothing recorded in the
cache.
There are some normal running states in which the object spends its time
servicing netfs requests:
(4) State FSCACHE_OBJECT_AVAILABLE.
A transient state in which pending operations are started, child objects
are permitted to advance from FSCACHE_OBJECT_INIT state, and temporary
lookup data is freed.
(5) State FSCACHE_OBJECT_ACTIVE.
The normal running state. In this state, requests the netfs makes will be
passed on to the cache.
(6) State FSCACHE_OBJECT_UPDATING.
The state machine comes here to update the object in the cache from the
netfs's records. This involves updating the auxiliary data that is used
to maintain coherency.
And there are terminal states in which an object cleans itself up, deallocates
memory and potentially deletes stuff from disk:
(7) State FSCACHE_OBJECT_LC_DYING.
The object comes here if it is dying because of a lookup or creation
error. This would be due to a disk error or system error of some sort.
Temporary data is cleaned up, and the parent is released.
(8) State FSCACHE_OBJECT_DYING.
The object comes here if it is dying due to an error, because its parent
cookie has been relinquished by the netfs or because the cache is being
withdrawn.
Any child objects waiting on this one are given CPU time so that they too
can destroy themselves. This object waits for all its children to go away
before advancing to the next state.
(9) State FSCACHE_OBJECT_ABORT_INIT.
The object comes to this state if it was waiting on its parent in
FSCACHE_OBJECT_INIT, but its parent died. The object will destroy itself
so that the parent may proceed from the FSCACHE_OBJECT_DYING state.
(10) State FSCACHE_OBJECT_RELEASING.
(11) State FSCACHE_OBJECT_RECYCLING.
The object comes to one of these two states when dying once it is rid of
all its children, if it is dying because the netfs relinquished its
cookie. In the first state, the cached data is expected to persist, and
in the second it will be deleted.
(12) State FSCACHE_OBJECT_WITHDRAWING.
The object transits to this state if the cache decides it wants to
withdraw the object from service, perhaps to make space, but also due to
error or just because the whole cache is being withdrawn.
(13) State FSCACHE_OBJECT_DEAD.
The object transits to this state when the in-memory object record is
ready to be deleted. The object processor shouldn't ever see an object in
this state.
THE SET OF EVENTS
-----------------
There are a number of events that can be raised to an object state machine:
(*) FSCACHE_OBJECT_EV_UPDATE
The netfs requested that an object be updated. The state machine will ask
the cache backend to update the object, and the cache backend will ask the
netfs for details of the change through its cookie definition ops.
(*) FSCACHE_OBJECT_EV_CLEARED
This is signalled in two circumstances:
(a) when an object's last child object is dropped and
(b) when the last operation outstanding on an object is completed.
This is used to proceed from the dying state.
(*) FSCACHE_OBJECT_EV_ERROR
This is signalled when an I/O error occurs during the processing of some
object.
(*) FSCACHE_OBJECT_EV_RELEASE
(*) FSCACHE_OBJECT_EV_RETIRE
These are signalled when the netfs relinquishes a cookie it was using.
The event selected depends on whether the netfs asks for the backing
object to be retired (deleted) or retained.
(*) FSCACHE_OBJECT_EV_WITHDRAW
This is signalled when the cache backend wants to withdraw an object.
This means that the object will have to be detached from the netfs's
cookie.
Because the withdrawing releasing/retiring events are all handled by the object
state machine, it doesn't matter if there's a collision with both ends trying
to sever the connection at the same time. The state machine can just pick
which one it wants to honour, and that effects the other.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
|
Make FS-Cache create its /proc interface and present various statistical
information through it. Also provide the functions for updating this
information.
These features are enabled by:
CONFIG_FSCACHE_PROC
CONFIG_FSCACHE_STATS
CONFIG_FSCACHE_HISTOGRAM
The /proc directory for FS-Cache is also exported so that caching modules can
add their own statistics there too.
The FS-Cache module is loadable at this point, and the statistics files can be
examined by userspace:
cat /proc/fs/fscache/stats
cat /proc/fs/fscache/histogram
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
|
Add the API for a generic facility (FS-Cache) by which caches may declare them
selves open for business, and may obtain work to be done from network
filesystems. The header file is included by:
#include <linux/fscache-cache.h>
Documentation for the API is also added to:
Documentation/filesystems/caching/backend-api.txt
This API is not usable without the implementation of the utility functions
which will be added in further patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
|
Add the API for a generic facility (FS-Cache) by which filesystems (such as AFS
or NFS) may call on local caching capabilities without having to know anything
about how the cache works, or even if there is a cache:
+---------+
| | +--------------+
| NFS |--+ | |
| | | +-->| CacheFS |
+---------+ | +----------+ | | /dev/hda5 |
| | | | +--------------+
+---------+ +-->| | |
| | | |--+
| AFS |----->| FS-Cache |
| | | |--+
+---------+ +-->| | |
| | | | +--------------+
+---------+ | +----------+ | | |
| | | +-->| CacheFiles |
| ISOFS |--+ | /var/cache |
| | +--------------+
+---------+
General documentation and documentation of the netfs specific API are provided
in addition to the header files.
As this patch stands, it is possible to build a filesystem against the facility
and attempt to use it. All that will happen is that all requests will be
immediately denied as if no cache is present.
Further patches will implement the core of the facility. The facility will
transfer requests from networking filesystems to appropriate caches if
possible, or else gracefully deny them.
If this facility is disabled in the kernel configuration, then all its
operations will trivially reduce to nothing during compilation.
WHY NOT I_MAPPING?
==================
I have added my own API to implement caching rather than using i_mapping to do
this for a number of reasons. These have been discussed a lot on the LKML and
CacheFS mailing lists, but to summarise the basics:
(1) Most filesystems don't do hole reportage. Holes in files are treated as
blocks of zeros and can't be distinguished otherwise, making it difficult
to distinguish blocks that have been read from the network and cached from
those that haven't.
(2) The backing inode must be fully populated before being exposed to
userspace through the main inode because the VM/VFS goes directly to the
backing inode and does not interrogate the front inode's VM ops.
Therefore:
(a) The backing inode must fit entirely within the cache.
(b) All backed files currently open must fit entirely within the cache at
the same time.
(c) A working set of files in total larger than the cache may not be
cached.
(d) A file may not grow larger than the available space in the cache.
(e) A file that's open and cached, and remotely grows larger than the
cache is potentially stuffed.
(3) Writes go to the backing filesystem, and can only be transferred to the
network when the file is closed.
(4) There's no record of what changes have been made, so the whole file must
be written back.
(5) The pages belong to the backing filesystem, and all metadata associated
with that page are relevant only to the backing filesystem, and not
anything stacked atop it.
OVERVIEW
========
FS-Cache provides (or will provide) the following facilities:
(1) Caches can be added / removed at any time, even whilst in use.
(2) Adds a facility by which tags can be used to refer to caches, even if
they're not available yet.
(3) More than one cache can be used at once. Caches can be selected
explicitly by use of tags.
(4) The netfs is provided with an interface that allows either party to
withdraw caching facilities from a file (required for (1)).
(5) A netfs may annotate cache objects that belongs to it. This permits the
storage of coherency maintenance data.
(6) Cache objects will be pinnable and space reservations will be possible.
(7) The interface to the netfs returns as few errors as possible, preferring
rather to let the netfs remain oblivious.
(8) Cookies are used to represent indices, files and other objects to the
netfs. The simplest cookie is just a NULL pointer - indicating nothing
cached there.
(9) The netfs is allowed to propose - dynamically - any index hierarchy it
desires, though it must be aware that the index search function is
recursive, stack space is limited, and indices can only be children of
indices.
(10) Indices can be used to group files together to reduce key size and to make
group invalidation easier. The use of indices may make lookup quicker,
but that's cache dependent.
(11) Data I/O is effectively done directly to and from the netfs's pages. The
netfs indicates that page A is at index B of the data-file represented by
cookie C, and that it should be read or written. The cache backend may or
may not start I/O on that page, but if it does, a netfs callback will be
invoked to indicate completion. The I/O may be either synchronous or
asynchronous.
(12) Cookies can be "retired" upon release. At this point FS-Cache will mark
them as obsolete and the index hierarchy rooted at that point will get
recycled.
(13) The netfs provides a "match" function for index searches. In addition to
saying whether a match was made or not, this can also specify that an
entry should be updated or deleted.
FS-Cache maintains a virtual index tree in which all indices, files, objects
and pages are kept. Bits of this tree may actually reside in one or more
caches.
FSDEF
|
+------------------------------------+
| |
NFS AFS
| |
+--------------------------+ +-----------+
| | | |
homedir mirror afs.org redhat.com
| | |
+------------+ +---------------+ +----------+
| | | | | |
00001 00002 00007 00125 vol00001 vol00002
| | | | |
+---+---+ +-----+ +---+ +------+------+ +-----+----+
| | | | | | | | | | | | |
PG0 PG1 PG2 PG0 XATTR PG0 PG1 DIRENT DIRENT DIRENT R/W R/O Bak
| |
PG0 +-------+
| |
00001 00003
|
+---+---+
| | |
PG0 PG1 PG2
In the example above, two netfs's can be seen to be backed: NFS and AFS. These
have different index hierarchies:
(*) The NFS primary index will probably contain per-server indices. Each
server index is indexed by NFS file handles to get data file objects.
Each data file objects can have an array of pages, but may also have
further child objects, such as extended attributes and directory entries.
Extended attribute objects themselves have page-array contents.
(*) The AFS primary index contains per-cell indices. Each cell index contains
per-logical-volume indices. Each of volume index contains up to three
indices for the read-write, read-only and backup mirrors of those volumes.
Each of these contains vnode data file objects, each of which contains an
array of pages.
The very top index is the FS-Cache master index in which individual netfs's
have entries.
Any index object may reside in more than one cache, provided it only has index
children. Any index with non-index object children will be assumed to only
reside in one cache.
The FS-Cache overview can be found in:
Documentation/filesystems/caching/fscache.txt
The netfs API to FS-Cache can be found in:
Documentation/filesystems/caching/netfs-api.txt
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
|
Document the slow work thread pool.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (54 commits)
glge: remove unused #include <version.h>
dnet: remove unused #include <version.h>
tcp: miscounts due to tcp_fragment pcount reset
tcp: add helper for counter tweaking due mid-wq change
hso: fix for the 'invalid frame length' messages
hso: fix for crash when unplugging the device
fsl_pq_mdio: Fix compile failure
fsl_pq_mdio: Revive UCC MDIO support
ucc_geth: Pass proper device to DMA routines, otherwise oops happens
i.MX31: Fixing cs89x0 network building to i.MX31ADS
tc35815: Fix build error if NAPI enabled
hso: add Vendor/Product ID's for new devices
ucc_geth: Remove unused header
gianfar: Remove unused header
kaweth: Fix locking to be SMP-safe
net: allow multiple dev per napi with GRO
r8169: reset IntrStatus after chip reset
ixgbe: Fix potential memory leak/driver panic issue while setting up Tx & Rx ring parameters
ixgbe: fix ethtool -A|a behavior
ixgbe: Patch to fix driver panic while freeing up tx & rx resources
...
|
|
This patch tries to fix OOM Killer problems caused by hierarchy.
Now, memcg itself has OOM KILL function (in oom_kill.c) and tries to
kill a task in memcg.
But, when hierarchy is used, it's broken and correct task cannot
be killed. For example, in following cgroup
/groupA/ hierarchy=1, limit=1G,
01 nolimit
02 nolimit
All tasks' memory usage under /groupA, /groupA/01, groupA/02 is limited to
groupA's 1Gbytes but OOM Killer just kills tasks in groupA.
This patch provides makes the bad process be selected from all tasks
under hierarchy. BTW, currently, oom_jiffies is updated against groupA
in above case. oom_jiffies of tree should be updated.
To see how oom_jiffies is used, please check mem_cgroup_oom_called()
callers.
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: const fix]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This won't remove cpuacct from the mounted hierachy:
# mount -t cgroup -o cpu,cpuacct xxx /mnt
# mount -o remount,cpu /mnt
Because for this usage mount(8) will append the new options to the original
options.
And this will get you right:
# mount [-t cgroup] -o remount,cpu xxx /mnt
Also document how to specify or change release_agent.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewd-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In following situation, with memory subsystem,
/groupA use_hierarchy==1
/01 some tasks
/02 some tasks
/03 some tasks
/04 empty
When tasks under 01/02/03 hit limit on /groupA, hierarchical reclaim
is triggered and the kernel walks tree under groupA. In this case,
rmdir /groupA/04 fails with -EBUSY frequently because of temporal
refcnt from the kernel.
In general. cgroup can be rmdir'd if there are no children groups and
no tasks. Frequent fails of rmdir() is not useful to users.
(And the reason for -EBUSY is unknown to users.....in most cases)
This patch tries to modify above behavior, by
- retries if css_refcnt is got by someone.
- add "return value" to pre_destroy() and allows subsystem to
say "we're really busy!"
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Previous description about system parameter in /proc/sys/net/unix/ is
wrong (or missed). Simply add a new description about unix_dgram_qlen
according to latest kernel.
Signed-off-by: Li Xiaodong <lixd@cn.fujitsu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Documentation/sysctls
Now /proc/sys is described in many places and much information is
redundant. This patch updates the proc.txt and move the /proc/sys
desciption out to the files in Documentation/sysctls.
Details are:
merge
- 2.1 /proc/sys/fs - File system data
- 2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem
- 2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
with Documentation/sysctls/fs.txt.
remove
- 2.2 /proc/sys/fs/binfmt_misc - Miscellaneous binary formats
since it's not better then the Documentation/binfmt_misc.txt.
merge
- 2.3 /proc/sys/kernel - general kernel parameters
with Documentation/sysctls/kernel.txt
remove
- 2.5 /proc/sys/dev - Device specific parameters
since it's obsolete the sysfs is used now.
remove
- 2.6 /proc/sys/sunrpc - Remote procedure calls
since it's not better then the Documentation/sysctls/sunrpc.txt
move
- 2.7 /proc/sys/net - Networking stuff
- 2.9 Appletalk
- 2.10 IPX
to newly created Documentation/sysctls/net.txt.
remove
- 2.8 /proc/sys/net/ipv4 - IPV4 settings
since it's not better then the Documentation/networking/ip-sysctl.txt.
add
- Chapter 3 Per-Process Parameters
to descibe /proc/<pid>/xxx parameters.
Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When using 'make pdfdocs', auto-generated files should be ignored
Signed-off-by: Henrik Austad <henrik@austad.us>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We want to phase out the GPIO "autorequest" mechanism in gpiolib and
require all callers to use gpio_request().
- Update feature-removal-schedule
- Update the documentation now
- Convert the relevant pr_warning() in gpiolib to a WARN()
so folk using this mechanism get a noisy stack dump
Some drivers and board init code will probably need to change.
Implementations not using gpiolib will still be fine; they are already
required to implement gpio_{request,free}() stubs.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
"dmode" allows overriding permissions of directories and
"mode" allows overriding permissions of files.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Doc: Fix spelling in RCU/rculist_nulls.txt.
Trival spelling fixes in RCU/rculist_nulls.txt.
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Tested-by: Jarek Poplawski <jarkao2@gmail.com;->
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At some point the API of call_rcu() changed from three parameters
to two parameters, correct the documentation.
One confusing thing in RCU/listRCU.txt, which is NOT fixed in this patch,
is that no reason or explaination is given for using call_rcu() instead of
the normal synchronize_rcu() call.
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial fix while reading through the RCU docs.
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- vxge driver help text file.
- No change from previous submission.
- Changes in previous submissions -
Removed the performance tuning section with instructions to disable
time stamps and change sysctl settings - Reported by Dave Miller
General clean up.
- Removed tx/rx_pause, exec_mode, tx_steering_type, rx_steering_type, gro,
intr_type, rx & tx max_indicate_pkts and exec_mode loadable parameters. The
driver default settings work well in most if not all cases. Another patch
to configure these parameters with ethtool will be released in the future -
Reported by Stephen Hemminger.
- Incorporated following fixes based on comments from Ben Hutchings
Removed references to earlier kernel versions.
Removed sections that are similar for all drivers -
Load/Unload
Identifying the adapter/interface
Boot time configuration
Removed loadable parameter -
NAPI - Napi is always enabled.
rx_steering_type & ring_blocks - The driver default settings
work well in most if not all cases. Another patch to configure
these parameters with ethtool will be released in the future.
Removed ethtool support section - No need to duplicate ethtool
docs here.
Removed Known Issue on SUSE 9 - Doesn't apply when using a
current kernel.
Removed Common Problems section - These don't apply to in-tree modules.
Removed Available Downloads section - Not sure this belongs in-tree.
Removed Copyright information - This notice doesn't belong in
the kernel.
Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Rastapur Santosh <santosh.rastapur@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As per discussion in:
http://marc.info/?l=linux-arm-kernel&m=123633652517391&w=2
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits)
ext4: Regularize mount options
ext4: fix locking typo in mballoc which could cause soft lockup hangs
ext4: fix typo which causes a memory leak on error path
jbd2: Update locking coments
ext4: Rename pa_linear to pa_type
ext4: add checks of block references for non-extent inodes
ext4: Check for an valid i_mode when reading the inode from disk
ext4: Use WRITE_SYNC for commits which are caused by fsync()
ext4: Add auto_da_alloc mount option
ext4: Use struct flex_groups to calculate get_orlov_stats()
ext4: Use atomic_t's in struct flex_groups
ext4: remove /proc tuning knobs
ext4: Add sysfs support
ext4: Track lifetime disk writes
ext4: Fix discard of inode prealloc space with delayed allocation.
ext4: Automatically allocate delay allocated blocks on rename
ext4: Automatically allocate delay allocated blocks on close
ext4: add EXT4_IOC_ALLOC_DA_BLKS ioctl
ext4: Simplify delalloc code by removing mpage_da_writepages()
ext4: Save stack space by removing fake buffer heads
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
PCI: fix HT MSI mapping fix
PCI: don't enable too much HT MSI mapping
x86/PCI: make pci=lastbus=255 work when acpi is on
PCI: save and restore PCIe 2.0 registers
PCI: update fakephp for bus_id removal
PCI: fix kernel oops on bridge removal
PCI: fix conflict between SR-IOV and config space sizing
powerpc/PCI: include pci.h in powerpc MSI implementation
PCI Hotplug: schedule fakephp for feature removal
PCI Hotplug: rename legacy_fakephp to fakephp
PCI Hotplug: restore fakephp interface with complete reimplementation
PCI: Introduce /sys/bus/pci/devices/.../rescan
PCI: Introduce /sys/bus/pci/devices/.../remove
PCI: Introduce /sys/bus/pci/rescan
PCI: Introduce pci_rescan_bus()
PCI: do not enable bridges more than once
PCI: do not initialize bridges more than once
PCI: always scan child buses
PCI: pci_scan_slot() returns newly found devices
PCI: don't scan existing devices
...
Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
|
|
A tridentfb driver has all the functionality of the cyblafb driver without
the bugs of the latter.
Changes to the tridentfb driver:
- FBINFO_READS_FAST added to the tridentfb. The cyblafb used a blitter
for scrolling which is faster than color expansion on Cyberblade
chipsets. The blitter is slower on a discrete Blade3D core. Use the
blitter for scrolling in the tridentfb only for integrated Blade3D
cores. Now, scrolling speed is about equal for the tridentfb and the
cyblafb.
- a copyright notice addition is done on request of Jani Monoses (the
first author of the tridentfb).
Tested on AGP Blade3D card and PCChips
M787CLR motherboard: VIA C3 cpu +
VT8601 north bridge (aka Cyberblade/i1).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The bindings describes a case where MMC/SD/SDIO slot directly connected to
a SPI bus. Such setups are widely used on embedded PowerPC boards.
The patch also adds the mmc-spi-slot entry to the OpenFirmware modalias
table.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add Linux support for the Linear Technology LTC4215 Hot Swap controller
I2C monitoring interface.
I have tested the driver with my board, and it appears to work fine. With
the power supplies disabled, it reads 11.93V input, 1.93V output, no
current and no power. With the supplies enabled, it reads 11.93V input,
11.98V output, no current, no power. I'm not drawing any current at the
moment, so this is reasonable. The value in the sense register never
reads anything except 0, so I expect to get zero from the current and
power calculations.
I didn't attempt to support changing any of the chip's settings or
enabling the FET. I'm not sure even how to do that and still fit within
the hwmon framework. :)
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix english in Documentation, add "how to test" description.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Vladimir Botka <vbotka@suse.cz>
Cc: <Quoc.Pham@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a driver for Intersil's ISL29003 ambient light sensor device plus some
documentation. Inspired by tsl2550.c, a driver for a similar device.
It is put in drivers/misc for now until the industrial I/O framework gets
merged.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that the filesystem freeze operation has been elevated to the VFS, and
is just an ioctl away, some sort of safety net for unintentionally frozen
root filesystems may be in order.
The timeout thaw originally proposed did not get merged, but perhaps
something like this would be useful in emergencies.
For example, freeze /path/to/mountpoint may freeze your root filesystem if
you forgot that you had that unmounted.
I chose 'j' as the last remaining character other than 'h' which is sort
of reserved for help (because help is generated on any unknown character).
I've tested this on a non-root fs with multiple (nested) freezers, as well
as on a system rendered unresponsive due to a frozen root fs.
[randy.dunlap@oracle.com: emergency thaw only if CONFIG_BLOCK enabled]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change the page_mkwrite prototype to take a struct vm_fault, and return
VM_FAULT_xxx flags. There should be no functional change.
This makes it possible to return much more detailed error information to
the VM (and also can provide more information eg. virtual_address to the
driver, which might be important in some special cases).
This is required for a subsequent fix. And will also make it easier to
merge page_mkwrite() with fault() in future.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Allow non root users with sufficient mlock rlimits to be able to allocate
hugetlb backed shm for now. Deprecate this though. This is being
deprecated because the mlock based rlimit checks for SHM_HUGETLB is not
consistent with mmap based huge page allocations.
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Reviewed-by: Mel Gorman <mel@csn.ul.ie>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Added some documentation in exofs.txt, as well as a BUGS file.
For further reading, operation instructions, example scripts
and up to date infomation and code please see:
http://open-osd.org
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
|
|
Based on previous LKML discussions:
* Update docs for regulator sysfs class attributes to highlight
the fact that all current attributes are intended to be control
inputs, including notably "state" and "opmode" which previously
implied otherwise.
* Define a new regulator driver get_status() method, which is the
first method reporting regulator outputs instead of inputs.
It can report on/off and error status; or instead of simply
"on", report the actual operating mode.
For the moment, this is a sysfs-only interface, not accessible to
regulator clients. Such clients can use the current notification
interfaces to detect errors, if the regulator reports them.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
|
|
Update md.txt to reflect recent changes in a number of sysfs
attributes.
Signed-off-by: NeilBrown <neilb@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest-and-virtio
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest-and-virtio:
lguest: barrier me harder
lguest: use bool instead of int
lguest: use KVM hypercalls
lguest: wire up pte_update/pte_update_defer
lguest: fix spurious BUG_ON() on invalid guest stack.
virtio: more neatening of virtio_ring macros.
virtio: fix BAD_RING, START_US and END_USE macros
|
|
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
hwmon: (fschmd) Add support for the FSC Hades IC
hwmon: (fschmd) Add support for the FSC Syleus IC
i2c-i801: Instantiate FSC hardware montioring chips
dmi: Let dmi_walk() users pass private data
hwmon: Define a standard interface for chassis intrusion detection
Move the pcf8591 driver to hwmon
hwmon: (w83627ehf) Only expose in6 or temp3 on the W83667HG
hwmon: (w83627ehf) Add support for W83667HG
hwmon: (w83627ehf) Invert fan pin variables logic
hwmon: (hdaps) Fix Thinkpad X41 axis inversion
hwmon: (hdaps) Allow inversion of separate axis
hwmon: (ds1621) Clean up documentation
hwmon: (ds1621) Avoid unneeded register access
hwmon: (ds1621) Clean up register access
hwmon: (ds1621) Reorder code statements
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (33 commits)
lockdep: fix deadlock in lockdep_trace_alloc
lockdep: annotate reclaim context (__GFP_NOFS), fix SLOB
lockdep: annotate reclaim context (__GFP_NOFS), fix
lockdep: build fix for !PROVE_LOCKING
lockstat: warn about disabled lock debugging
lockdep: use stringify.h
lockdep: simplify check_prev_add_irq()
lockdep: get_user_chars() redo
lockdep: simplify get_user_chars()
lockdep: add comments to mark_lock_irq()
lockdep: remove macro usage from mark_held_locks()
lockdep: fully reduce mark_lock_irq()
lockdep: merge the !_READ mark_lock_irq() helpers
lockdep: merge the _READ mark_lock_irq() helpers
lockdep: simplify mark_lock_irq() helpers #3
lockdep: further simplify mark_lock_irq() helpers
lockdep: simplify the mark_lock_irq() helpers
lockdep: split up mark_lock_irq()
lockdep: generate usage strings
lockdep: generate the state bit definitions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc
* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
Revert "proc: revert /proc/uptime to ->read_proc hook"
proc 2/2: remove struct proc_dir_entry::owner
proc 1/2: do PDE usecounting even for ->read_proc, ->write_proc
proc: fix sparse warnings in pagemap_read()
proc: move fs/proc/inode-alloc.txt comment into a source file
|
|
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy
as correctly noted at bug #12454. Someone can lookup entry with NULL
->owner, thus not pinning enything, and release it later resulting
in module refcount underflow.
We can keep ->owner and supply it at registration time like ->proc_fops
and ->data.
But this leaves ->owner as easy-manipulative field (just one C assignment)
and somebody will forget to unpin previous/pin current module when
switching ->owner. ->proc_fops is declared as "const" which should give
some thoughts.
->read_proc/->write_proc were just fixed to not require ->owner for
protection.
rmmod'ed directories will be empty and return "." and ".." -- no harm.
And directories with tricky enough readdir and lookup shouldn't be modular.
We definitely don't want such modular code.
Removing ->owner will also make PDE smaller.
So, let's nuke it.
Kudos to Jeff Layton for reminding about this, let's say, oversight.
http://bugzilla.kernel.org/show_bug.cgi?id=12454
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
|
