summaryrefslogtreecommitdiffstats
path: root/Documentation
AgeCommit message (Collapse)Author
2009-03-31proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-03-30Merge branch 'x86-stage-3-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-stage-3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (190 commits) Revert "cpuacct: reduce one NULL check in fast-path" Revert "x86: don't compile vsmp_64 for 32bit" x86: Correct behaviour of irq affinity x86: early_ioremap_init(), use __fix_to_virt(), because we are sure it's safe x86: use default_cpu_mask_to_apicid for 64bit x86: fix set_extra_move_desc calling x86, PAT, PCI: Change vma prot in pci_mmap to reflect inherited prot x86/dmi: fix dmi_alloc() section mismatches x86: e820 fix various signedness issues in setup.c and e820.c x86: apic/io_apic.c define msi_ir_chip and ir_ioapic_chip all the time x86: irq.c keep CONFIG_X86_LOCAL_APIC interrupts together x86: irq.c use same path for show_interrupts x86: cpu/cpu.h cleanup x86: Fix a couple of sparse warnings in arch/x86/kernel/apic/io_apic.c Revert "x86: create a non-zero sized bm_pte only when needed" x86: pci-nommu.c cleanup x86: io_delay.c cleanup x86: rtc.c cleanup x86: i8253 cleanup x86: kdebugfs.c cleanup ...
2009-03-30Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (180 commits) powerpc: clean up ssi.txt, add definition for fsl,ssi-asynchronous powerpc/85xx: Add support for the "socrates" board (MPC8544). powerpc: Fix bugs introduced by sysfs changes powerpc: Sanitize stack pointer in signal handling code powerpc: Add write barrier before enabling DTL flags powerpc/83xx: Update ranges in gianfar node to match other dts powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes powerpc/83xx: Add power management support for MPC837x boards powerpc/mm: Introduce early_init_mmu() on 64-bit powerpc/mm: Add option for non-atomic PTE updates to ppc64 powerpc/mm: Fix printk type warning in mmu_context_nohash powerpc/mm: Rename arch/powerpc/kernel/mmap.c to mmap_64.c powerpc/mm: Merge various PTE bits and accessors definitions powerpc/mm: Tweak PTE bit combination definitions powerpc/cell: Fix iommu exception reporting powerpc/mm: e300c2/c3/c4 TLB errata workaround powerpc/mm: Used free register to save a few cycles in SW TLB miss handling powerpc/mm: Remove unused register usage in SW TLB miss handling ...
2009-03-30V4L/DVB (11225): v4lgrab: fix compilation warningsMauro Carvalho Chehab
Documentation/video4linux/v4lgrab.c: In function ‘main’: Documentation/video4linux/v4lgrab.c:193: warning: ‘src_depth’ is used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘b’ may be used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘g’ may be used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘r’ may be used uninitialized in this function Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11223): gspca - doc: Add the 15b8:6001 webcam to the Documentation.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11138): get_dvb_firmware: add support for downloading the cx2584x ↵Mauro Carvalho Chehab
firmware for pvrusb2 Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11137): get_dvb_firmware: add cx23885 firmwaresMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11136): get_dvb_firmware: Add download code for cx18 firmwaresMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11124): Add support for ProVideo PV-183 to bttvAlan McIvor
Add support for ProVideo PV-183 to bttv This patch adds support for the ProVideo PV-183 card to the bttv device driver. The PV-183 is a PCI card with 8 BT878 devices plus a Hint Corp HiNT HB4 PCI-PCI Bridge. Each BT878 has two composite input channels available. There are no tuners on this card. Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11108): get_dvb_firmware: Add option to download firmware for cx231xxMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11051): v4l-dvb: replace remaining references to the old mailinglist.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11044): v4l2-device: add v4l2_device_disconnectHans Verkuil
Call v4l2_device_disconnect when the parent of a hotpluggable device disconnects. This ensures that you do not have a pointer to a device that is no longer present. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11039): gspca - most jpeg subdrivers: Change the JPEG header creation.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11021): v4l2-device: add a notify callback.Hans Verkuil
Add a notify callback to v4l2_device to let sub-devices notify their parent of special events. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10988): v4l2-dev: use parent field if the v4l2_device has no parent ↵Hans Verkuil
set. Normally the parent device of v4l2_device is used as the video device node's parent. But if it was not set, then use the parent field in the video_device struct. This is needed in the cx88 driver, which has one core v4l2_device but creates multiple pci devices (one each for raw and mpeg video). So you cannot associate the core v4l2_device with a particular PCI device, but you can do that for each video_device. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10980): doc: improve the v4l2-framework documentation.Hans Verkuil
Emphasize the need to call i2c_set_adapdata and clarify the use of the chipid in v4l2_i2c_new_(probed_)device(). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10949): Add support for Terratec Cinergy HT PCI MKIIStephan Wienczny
This patch adds support for Terratec Cinergy HT PCI MKII with card id 79. Its more or less a copy of Pinnacle Hybrid PCTV. Thanks to k1ngf1sher on forum.ubuntuusers.de for the idea to copy that card. Signed-off-by: Stephan Wienczny <stephan@wienczny.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10944): Conceptronic CTVFMI2 PCI IdRobert Millan
My BTTV_BOARD_CONCEPTRONIC_CTVFMI2 card wasn't auto-detected, here's a patch that adds its PCI id. lspci -nnv output: 05:06.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11) 05:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11) Press <break> within 3 seconds if this is wrong. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10931): zoran: Drop the lock_norm module parameterJean Delvare
The lock_norm module parameter doesn't look terribly useful. If you don't want to change the norm, just don't change it. As a matter of fact, no other v4l driver has such a parameter. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10926): saa7134: enable digital tv support for Hauppauge WinTV-HVR1120Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10923): saa7134: fix typo in product nameMichael Krufky
replace occurances of "HVR1150" with "HVR1120" - this was a typo. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10909): tvmixer: remove last remaining references to this deleted ↵Hans Verkuil
module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10870a): remove all references for video_decoder.hMauro Carvalho Chehab
changeset 04934e44e3784a1b969582e2d59afcec278470c6 removed the last implementation that were still using the V4L1 obsoleted header. Now, video_decoder.h is not used anymore by any driver. Let's remove it and all references for it in Kernel. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10877): saa7134: add analog support for Hauppauge HVR1110r3 boardsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10827): Add support for GeoVision GV-800(S)Bruno Christo
I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips. It has 16 video inputs and 4 audio inputs, and it is almost identical to the GV-800, as seen on http://bttv-gallery.de . The only difference appears to be the analog mux, it has a CD22M3494 in place of the MT8816AP. The card has a blue PCB, as seen in this picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg . This card wasn't originally supported, and it was detected as UNKNOWN/GENERIC. The video inputs weren't working, so I tried "forcing" a few cards like the GeoVision GV-600, but there was still no video. So I made a patch to support this card, based on the Kodicom 4400r. The GV-800(S) is identified as follows: ... 02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 02:00.0 0400: 109e:036e (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdfff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:00.1 0480: 109e:0878 (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:04.0 0400: 109e:036e (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffd000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:04.1 0480: 109e:0878 (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffc000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:08.0 0400: 109e:036e (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffb000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:08.1 0480: 109e:0878 (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffa000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:0c.0 0400: 109e:036e (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff9000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:0c.1 0480: 109e:0878 (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff8000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 As you can see, the GV-800(S) card is almost identical to the GV-800 on bttv-gallery, so this patch might also work for that card. If not, only a few changes should be required on the gv800s_write() function. After this patch, the video inputs work correctly on linux 2.6.24 and 2.6.27 using the software 'motion'. The input order may seem a little odd, but it's the order the original software/driver uses, and I decided to keep that order to get the most out of the card. I tried to get the audio working with the snd-bt87x module, but I only get noise from every audio input, even after selecting a different mux with alsamixer. Also, after trying to play sound from those sources, I randomly get a RISC error about an invalid RISC opcode, and then that output stops working. I also can't change the sampling rate when recording. Any pointers to adding audio support are welcome. Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10805): Add support for NetUP Dual DVB-S2 CI cardIgor M. Liplianin
Add support for NetUP Dual DVB-S2 CI card The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips, STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator. http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10741): em28xx: Add Kaiser Baas Video to DVD maker supportDouglas Schilling Landgraf
Added usb vendor/product id for Kaiser Baas Video to DVD maker. Thanks to Trevor Campbell <tca42186@bigpond.net.au> for providing all data and tests needed to add this card to em28xx driver. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10740): em28xx-cards: Add SIIG AVTuner-PVR boardDouglas Schilling Landgraf
Added SIIG AVTuner-PVR to the right entry. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10739): em28xx-cards: remove incorrect entryDouglas Schilling Landgraf
Removed EM2821_BOARD_PROLINK_PLAYTV_USB2 entry. This entry has a incorrect tuner set. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB(10738a): remove include/linux/video_encoder.hMauro Carvalho Chehab
include/linux/video_encoder.h is not used anymore by a v4l driver. Let's remove it and its occurences. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10644): v4l2-subdev: rename dev field to v4l2_devHans Verkuil
Remain consistent in the naming: fields pointing to v4l2_device should be called v4l2_dev. There are too many device-like entities without adding to the confusion by mixing naming conventions. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10643): v4l2-device: allow a NULL parent device when registering.Hans Verkuil
Some drivers (e.g. for ISA devices) have no parent device because there is no associated bus driver. Allow the parent device to be NULL in those cases when registering v4l2_device. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10571): v4l2-framework.txt: Fixes the videobuf init functionsMauro Carvalho Chehab
Documents the driver usage functions, instead of the generic one used by the videobuf specific handlers. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10570): v4l2-framework: documments videobuf usage on driversMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10556): em28xx-cards: Add Pinnacle Dazzle Video Creator Plus DVC107 ↵Douglas Schilling Landgraf
description Added board Pinnacle Dazzle Video Creator Plus DVC107 to name description field. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10530): Documentation and code cleanupsTobias Lorenz
- "DealExtreme" sells the "PCear" radio and that comes from "Sanei Electric". - MPlayer is also usable as radio application. - Consistent usage of tabulators and blanks in the code. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10528): em28xx: support added for IO-DATA GV/MVP SZ - EMPIA-2820 ↵Indika Katugampala
chipset [dougsland@redhat.com: Fixed CodingStyle] Signed-off-by: Indika Katugampala <indika_20012001@yahoo.co.jp> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10524): em28xx: Add DVC 101 model to Pinnacle Dazzle descriptionDouglas Schilling Landgraf
Added DVC 101 model to Pinnacle Dazzle description Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10516): em28xx: Add support for Easy Cap Capture DC-60Mauro Carvalho Chehab
Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one of those devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10514): em28xx: Add support for Kaiomy TVnPC U2 stickMauro Carvalho Chehab
Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one of those devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10489): doc: use consistent naming conventions for vdev and v4l2_dev.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10487): doc: update hm12 documentation.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10421): gspca - documentation: Add the webcam 041e:405b.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10388): gspca - pac207: Webcam 093a:2474 added.Lierdakil
Signed-off-by: Lierdakil <root@livid.pp.ru> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10366): gspca - mr97310a: New subdriver.Kyle Guinn
This patch adds support for USB webcams based on the MR97310A chip. It was tested with an Aiptek PenCam VGA+ webcam. Signed-off-by: Kyle Guinn <elyk03@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10323): em28xx: Add entry for GADMEI TVR200Douglas Schilling Landgraf
Added entry for GADMEI TVR200. Thanks to Yohanes Nugroho <yohanes@gmail.com> for testing and data collection. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10299): bttv: Add support for IVCE-8784 support for V4L2 bttv driverDouglas Kosovic
It's a quad Bt878 PCI-e x1 capture board that's basically the same as the IVC-200 (quad Bt878 PCI) capture board that's currently supported in the V4L2 bttv driver. Manufacturer's web page for IVCE-8784 with photo and info: http://www.iei.com.tw/en/product_IPC.asp?model=IVCE-8784 Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10269): Add support for DVBWorld DVBS2 PCI-e 2005.Igor M. Liplianin
DVBWorld DVBS2 PCI-e 2005 card contains cx23885 PCI-e bridge and cx24116 demodulator. http://www.linuxtv.org/wiki/index.php/DVBWorld_DVB-S2_2005_PCI-Express_Card The card tested by me (Igor). Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10267): Add support for TeVii S470 DVB-S2 PCI-e card.Igor M. Liplianin
TeVii S470 DVB-S2 PCI-e card contains cx23885 PCI-e bridge and cx24116 demodulator. http://www.linuxtv.org/wiki/index.php/TeVii_S470 The card tested by me (Igor). Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10266): Add support for TurboSight TBS6920 DVB-S2 PCI-e card.Igor M. Liplianin
TurboSight TBS6920 DVB-S2 PCI-e card contains cx23885 PCI-e bridge and cx24116 demodulator. http://www.linuxtv.org/wiki/index.php/TBS_6920 The card tested by me (Igor). Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-08 01:24:33 +0000