summaryrefslogtreecommitdiffstats
path: root/Documentation
AgeCommit message (Collapse)Author
2012-06-02Merge tag 'dm-3.5-changes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper updates from Alasdair G Kergon: "Improve multipath's retrying mechanism in some defined circumstances and provide a simple reserve/release mechanism for userspace tools to access thin provisioning metadata while the pool is in use." * tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm thin: provide userspace access to pool metadata dm thin: use slab mempools dm mpath: allow ioctls to trigger pg init dm mpath: delay retry of bypassed pg dm mpath: reduce size of struct multipath
2012-06-03dm thin: provide userspace access to pool metadataJoe Thornber
This patch implements two new messages that can be sent to the thin pool target allowing it to take a snapshot of the _metadata_. This, read-only snapshot can be accessed by userland, concurrently with the live target. Only one metadata snapshot can be held at a time. The pool's status line will give the block location for the current msnap. Since version 0.1.5 of the userland thin provisioning tools, the thin_dump program displays the msnap as follows: thin_dump -m <msnap root> <metadata dev> Available here: https://github.com/jthornber/thin-provisioning-tools Now that userland can access the metadata we can do various things that have traditionally been kernel side tasks: i) Incremental backups. By using metadata snapshots we can work out what blocks have changed over time. Combined with data snapshots we can ensure the data doesn't change while we back it up. A short proof of concept script can be found here: https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb ii) Migration of thin devices from one pool to another. iii) Merging snapshots back into an external origin. iv) Asyncronous replication. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull straggler x86 fixes from Peter Anvin: "Three groups of patches: - EFI boot stub documentation and the ability to print error messages; - Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which should never have been ported, and the port is broken and potentially dangerous.) - ftrace stack corruption fixes. I'm not super-happy about the technical implementation, but it is probably the least invasive in the short term. In the future I would like a single method for nesting the debug stack, however." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32 x86, efi: Add EFI boot stub documentation x86, efi; Add EFI boot stub console support x86, efi: Only close open files in error path ftrace/x86: Do not change stacks in DEBUG when calling lockdep x86: Allow nesting of the debug stack IDT setting x86: Reset the debug_stack update counter ftrace: Use breakpoint method to update ftrace caller ftrace: Synchronize variable setting with breakpoints
2012-06-01Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6Linus Torvalds
Pull fbdev updates from Florian Tobias Schandinat: - driver for AUO-K1900 and AUO-K1901 epaper controller - large updates for OMAP (e.g. decouple HDMI audio and video) - some updates for Exynos and SH Mobile - various other small fixes and cleanups * tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits) video: bfin_adv7393fb: Fix cleanup code video: exynos_dp: reduce delay time when configuring video setting video: exynos_dp: move sw reset prioir to enabling sw defined function video: exynos_dp: use devm_ functions fb: handle NULL pointers in framebuffer release OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request OMAPDSS: Apply VENC timings even if panel is disabled OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC OMAPDSS: DISPC: Support rotation through TILER OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n OMAPFB: remove compiler warnings when CONFIG_BUG=n OMAPDSS: remove compiler warnings when CONFIG_BUG=n OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods OMAPDSS: DISPC: Update Accumulator configuration for chroma plane drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers video: exynos mipi dsi: support reverse panel type video: exynos mipi dsi: Properly interpret the interrupt source flags video: exynos mipi dsi: Avoid races in probe() ...
2012-06-01Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
2012-06-01Merge branch 'slab/for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux Pull slab updates from Pekka Enberg: "Mainly a bunch of SLUB fixes from Joonsoo Kim" * 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: slub: use __SetPageSlab function to set PG_slab flag slub: fix a memory leak in get_partial_node() slub: remove unused argument of init_kmem_cache_node() slub: fix a possible memory leak Documentations: Fix slabinfo.c directory in vm/slub.txt slub: fix incorrect return type of get_any_partial()
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs changes from Al Viro. "A lot of misc stuff. The obvious groups: * Miklos' atomic_open series; kills the damn abuse of ->d_revalidate() by NFS, which was the major stumbling block for all work in that area. * ripping security_file_mmap() and dealing with deadlocks in the area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in general. * ->encode_fh() switched to saner API; insane fake dentry in mm/cleancache.c gone. * assorted annotations in fs (endianness, __user) * parts of Artem's ->s_dirty work (jff2 and reiserfs parts) * ->update_time() work from Josef. * other bits and pieces all over the place. Normally it would've been in two or three pull requests, but signal.git stuff had eaten a lot of time during this cycle ;-/" Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the 'truncate_range' inode method was removed by the VM changes, the VFS update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due to sparse fix added twice, with other changes nearby). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits) nfs: don't open in ->d_revalidate vfs: retry last component if opening stale dentry vfs: nameidata_to_filp(): don't throw away file on error vfs: nameidata_to_filp(): inline __dentry_open() vfs: do_dentry_open(): don't put filp vfs: split __dentry_open() vfs: do_last() common post lookup vfs: do_last(): add audit_inode before open vfs: do_last(): only return EISDIR for O_CREAT vfs: do_last(): check LOOKUP_DIRECTORY vfs: do_last(): make ENOENT exit RCU safe vfs: make follow_link check RCU safe vfs: do_last(): use inode variable vfs: do_last(): inline walk_component() vfs: do_last(): make exit RCU safe vfs: split do_lookup() Btrfs: move over to use ->update_time fs: introduce inode operation ->update_time reiserfs: get rid of resierfs_sync_super reiserfs: mark the superblock as dirty a bit later ...
2012-06-01x86, efi: Add EFI boot stub documentationMatt Fleming
Since we can't expect every user to read the EFI boot stub code it seems prudent to have a couple of paragraphs explaining what it is and how it works. The "initrd=" option in particular is tricky because it only understands absolute EFI-style paths (backslashes as directory separators), and until now this hasn't been documented anywhere. This has tripped up a couple of users. Cc: Matthew Garrett <mjg@redhat.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1331907517-3985-4-git-send-email-matt@console-pimps.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-01fs: introduce inode operation ->update_timeJosef Bacik
Btrfs has to make sure we have space to allocate new blocks in order to modify the inode, so updating time can fail. We've gotten around this by having our own file_update_time but this is kind of a pain, and Christoph has indicated he would like to make xfs do something different with atime updates. So introduce ->update_time, where we will deal with i_version an a/m/c time updates and indicate which changes need to be made. The normal version just does what it has always done, updates the time and marks the inode dirty, and then filesystems can choose to do something different. I've gone through all of the users of file_update_time and made them check for errors with the exception of the fault code since it's complicated and I wasn't quite sure what to do there, also Jan is going to be pushing the file time updates into page_mkwrite for those who have it so that should satisfy btrfs and make it not a big deal to check the file_update_time() return code in the generic fault path. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-05-31Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge misc patches from Andrew Morton: - the "misc" tree - stuff from all over the map - checkpatch updates - fatfs - kmod changes - procfs - cpumask - UML - kexec - mqueue - rapidio - pidns - some checkpoint-restore feature work. Reluctantly. Most of it delayed a release. I'm still rather worried that we don't have a clear roadmap to completion for this work. * emailed from Andrew Morton <akpm@linux-foundation.org>: (78 patches) kconfig: update compression algorithm info c/r: prctl: add ability to set new mm_struct::exe_file c/r: prctl: extend PR_SET_MM to set up more mm_struct entries c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat syscalls, x86: add __NR_kcmp syscall fs, proc: introduce /proc/<pid>/task/<tid>/children entry sysctl: make kernel.ns_last_pid control dependent on CHECKPOINT_RESTORE aio/vfs: cleanup of rw_copy_check_uvector() and compat_rw_copy_check_uvector() eventfd: change int to __u64 in eventfd_signal() fs/nls: add Apple NLS pidns: make killed children autoreap pidns: use task_active_pid_ns in do_notify_parent rapidio/tsi721: add DMA engine support rapidio: add DMA engine support for RIO data transfers ipc/mqueue: add rbtree node caching support tools/selftests: add mq_perf_tests ipc/mqueue: strengthen checks on mqueue creation ipc/mqueue: correct mq_attr_ok test ipc/mqueue: improve performance of send/recv selftests: add mq_open_tests ...
2012-05-31c/r: procfs: add arg_start/end, env_start/end and exit_code members to ↵Cyrill Gorcunov
/proc/$pid/stat We would like to have an ability to restore command line arguments and program environment pointers but first we need to obtain them somehow. Thus we put these values into /proc/$pid/stat. The exit_code is needed to restore zombie tasks. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Vagin <avagin@openvz.org> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31fs, proc: introduce /proc/<pid>/task/<tid>/children entryCyrill Gorcunov
When we do checkpoint of a task we need to know the list of children the task, has but there is no easy and fast way to generate reverse parent->children chain from arbitrary <pid> (while a parent pid is provided in "PPid" field of /proc/<pid>/status). So instead of walking over all pids in the system (creating one big process tree in memory, just to figure out which children a task has) -- we add explicit /proc/<pid>/task/<tid>/children entry, because the kernel already has this kind of information but it is not yet exported. This is a first level children, not the whole process tree. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31mqueue: separate mqueue default value from maximum valueKOSAKI Motohiro
Commit b231cca4381e ("message queues: increase range limits") changed mqueue default value when attr parameter is specified NULL from hard coded value to fs.mqueue.{msg,msgsize}_max sysctl value. This made large side effect. When user need to use two mqueue applications 1) using !NULL attr parameter and it require big message size and 2) using NULL attr parameter and only need small size message, app (1) require to raise fs.mqueue.msgsize_max and app (2) consume large memory size even though it doesn't need. Doug Ledford propsed to switch back it to static hard coded value. However it also has a compatibility problem. Some applications might started depend on the default value is tunable. The solution is to separate default value from maximum value. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Acked-by: Doug Ledford <dledford@redhat.com> Acked-by: Joe Korty <joe.korty@ccur.com> Cc: Amerigo Wang <amwang@redhat.com> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31proc: report file/anon bit in /proc/pid/pagemapKonstantin Khlebnikov
This is an implementation of Andrew's proposal to extend the pagemap file bits to report what is missing about tasks' working set. The problem with the working set detection is multilateral. In the criu (checkpoint/restore) project we dump the tasks' memory into image files and to do it properly we need to detect which pages inside mappings are really in use. The mincore syscall I though could help with this did not. First, it doesn't report swapped pages, thus we cannot find out which parts of anonymous mappings to dump. Next, it does report pages from page cache as present even if they are not mapped, and it doesn't make that has not been cow-ed. Note, that issue with swap pages is critical -- we must dump swap pages to image file. But the issues with file pages are optimization -- we can take all file pages to image, this would be correct, but if we know that a page is not mapped or not cow-ed, we can remove them from dump file. The dump would still be self-consistent, though significantly smaller in size (up to 10 times smaller on real apps). Andrew noticed, that the proc pagemap file solved 2 of 3 above issues -- it reports whether a page is present or swapped and it doesn't report not mapped page cache pages. But, it doesn't distinguish cow-ed file pages from not cow-ed. I would like to make the last unused bit in this file to report whether the page mapped into respective pte is PageAnon or not. [comment stolen from Pavel Emelyanov's v1 patch] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31CodingStyle: add kmalloc_array() to memory allocatorsXi Wang
Add the new kmalloc_array() to the list of general-purpose memory allocators in chapter 14. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31Merge tag 'for-v3.5' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery updates from Anton Vorontsov: "A bunch of fixes for v3.5, nothing extraordinary." * tag 'for-v3.5' of git://git.infradead.org/battery-2.6: (27 commits) smb347-charger: Include missing <linux/err.h> smb347-charger: Clean up battery attributes max17042_battery: Add support for max17047/50 chip sbs-battery.c: Capacity attr = remaining relative capacity isp1704_charger: Use after free on probe error ds2781_battery: Use DS2781_PARAM_EEPROM_SIZE and DS2781_USER_EEPROM_SIZE power_supply: Fix a typo in BATTERY_DS2781 Kconfig entry charger-manager: Provide cm_notify_event function for in-kernel use charger-manager: Poll battery health in normal state smb347-charger: Convert to regmap API smb347-charger: Move IRQ enabling to the end of probe smb347-charger: Rename few functions to match better what they are doing smb347-charger: Convert to use module_i2c_driver() smb347_charger: Cleanup power supply registration code in probe ab8500: Clean up probe routines ab8500_fg: Harden platform data check ab8500_btemp: Harden platform data check ab8500_charger: Harden platform data check MAINTAINERS: Fix 'F' entry for the power supply class max17042_battery: Handle irq request failure case ...
2012-05-31Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull final round of SCSI updates from James Bottomley: "This is primarily another round of driver updates (bnx2fc, qla2xxx, qla4xxx) including the target mode driver for qla2xxx. We've also got a couple of regression fixes (async scanning, broken this merge window and a fix to a long standing break in the scsi_wait_scan module)." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (45 commits) [SCSI] fix scsi_wait_scan [SCSI] fix async probe regression [SCSI] be2iscsi: fix dma free size mismatch regression [SCSI] qla4xxx: Update driver version to 5.02.00-k17 [SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failure [SCSI] qla4xxx: Add change_queue_depth API support [SCSI] qla4xxx: Fix clear ddb mbx command failure issue. [SCSI] qla4xxx: Fix kernel panic during discovery logout. [SCSI] qla4xxx: Correct early completion of pending mbox. [SCSI] fcoe, bnx2fc, libfcoe: SW FCoE and bnx2fc use FCoE Syfs [SCSI] libfcoe: Add fcoe_sysfs [SCSI] bnx2fc: Allocate fcoe_ctlr with bnx2fc_interface, not as a member [SCSI] fcoe: Allocate fcoe_ctlr with fcoe_interface, not as a member [SCSI] Fix dm-multipath starvation when scsi host is busy [SCSI] ufs: fix potential NULL pointer dereferencing error in ufshcd_prove. [SCSI] qla2xxx: don't free pool that wasn't allocated [SCSI] mptfusion: unlock on error in mpt_config() [SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core [SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series [SCSI] Revert "qla2xxx: During loopdown perform Diagnostic loopback." ...
2012-05-31Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull follow-up block updates from Jens Axboe: "Includes the fix from Eric to resolve the infinite loop in looking up or creating an IO context for an exiting task. Also a bunch of mtip32xx patches. Fairly trivial stuff. It's fairly new though, but no point in keeping it out of the tree until 3.6 imho. I've thrown it through basic testing locally as well, works fine. The one contentious part is the patch that Greg complained about (sysfs file with multiple values, should be a debugfs file), which is perfectly valid, but not a regression from what the file contains now. That will be fixed up separately." * 'for-linus' of git://git.kernel.dk/linux-block: block: avoid infinite loop in get_task_io_context() mtip32xx: Changes to sysfs entries mtip32xx: Convert macro definitions for flag bits to enum mtip32xx: minor performance tweak mtip32xx: Fix to support more than one sector in exec_drive_command() mtip32xx: Use plain spinlock for 'cmd_issue_lock' mtip32xx: Set block queue boundary variables mtip32xx: Fix to handle TFE for PIO(IOCTL/internal) commands mtip32xx: Change HDIO_GET_IDENTITY to return stored data mtip32xx: Set custom timeouts for PIO commands mtip32xx: fix clearing an incorrect register in mtip_init_port
2012-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking changes from David S. Miller: 1) Fix IPSEC header length calculation for transport mode in ESP. The issue is whether to do the calculation before or after alignment. Fix from Benjamin Poirier. 2) Fix regression in IPV6 IPSEC fragment length calculations, from Gao Feng. This is another transport vs tunnel mode issue. 3) Handle AF_UNSPEC connect()s properly in L2TP to avoid OOPSes. Fix from James Chapman. 4) Fix USB ASIX driver's reception of full sized VLAN packets, from Eric Dumazet. 5) Allow drop monitor (and, more generically, all generic netlink protocols) to be automatically loaded as a module. From Neil Horman. Fix up trivial conflict in Documentation/feature-removal-schedule.txt due to new entries added next to each other at the end. As usual. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) net/smsc911x: Repair broken failure paths virtio-net: remove useless disable on freeze netdevice: Update netif_dbg for CONFIG_DYNAMIC_DEBUG drop_monitor: Add module alias to enable automatic module loading genetlink: Build a generic netlink family module alias net: add MODULE_ALIAS_NET_PF_PROTO_NAME r6040: Do a Proper deinit at errorpath and also when driver unloads (calling r6040_remove_one) r6040: disable pci device if the subsequent calls (after pci_enable_device) fails skb: avoid unnecessary reallocations in __skb_cow net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens asix: allow full size 8021Q frames to be received rds_rdma: don't assume infiniband device is PCI l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case mac80211: fix ADDBA declined after suspend with wowlan wlcore: fix undefined symbols when CONFIG_PM is not defined mac80211: fix flag check for QoS NOACK frames ath9k_hw: apply internal regulator settings on AR933x ath9k_hw: update AR933x initvals to fix issues with high power devices ath9k: fix a use-after-free-bug when ath_tx_setup_buffer() fails ath9k: stop rx dma before stopping tx ...
2012-05-31mtip32xx: Changes to sysfs entriesAsai Thambi S P
* Formatted the output of 'registers' entry * Added "Commands in Q' to output of 'registers' entry * Added a new entry 'flags' Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds
Pull ceph updates from Sage Weil: "There are some updates and cleanups to the CRUSH placement code, a bug fix with incremental maps, several cleanups and fixes from Josh Durgin in the RBD block device code, a series of cleanups and bug fixes from Alex Elder in the messenger code, and some miscellaneous bounds checking and gfp cleanups/fixes." Fix up trivial conflicts in net/ceph/{messenger.c,osdmap.c} due to the networking people preferring "unsigned int" over just "unsigned". * git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (45 commits) libceph: fix pg_temp updates libceph: avoid unregistering osd request when not registered ceph: add auth buf in prepare_write_connect() ceph: rename prepare_connect_authorizer() ceph: return pointer from prepare_connect_authorizer() ceph: use info returned by get_authorizer ceph: have get_authorizer methods return pointers ceph: ensure auth ops are defined before use ceph: messenger: reduce args to create_authorizer ceph: define ceph_auth_handshake type ceph: messenger: check return from get_authorizer ceph: messenger: rework prepare_connect_authorizer() ceph: messenger: check prepare_write_connect() result ceph: don't set WRITE_PENDING too early ceph: drop msgr argument from prepare_write_connect() ceph: messenger: send banner in process_connect() ceph: messenger: reset connection kvec caller libceph: don't reset kvec in prepare_write_banner() ceph: ignore preferred_osd field ceph: fully initialize new layout ...
2012-05-30Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull i2c updates from Jean Delvare. * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLING i2c-dev: Add support for I2C_M_RECV_LEN
2012-05-30Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull second set of watchdog updates from Wim Van Sebroeck: "This changeset contains following changes: * Add support for multiple watchdog devices. We use dynamically allocated device id's for this. * Add locking into the generic watchdog infrastructure. * Add support for dynamically allocated watchdog_device structs so that we can deal with devices that get unbound. * convert following drivers to the generic watchdog framework: sch5627, sch5636 and sp805_wdt. * Add DA9052/53 PMIC watchdog support * Fix printk format warnings for iTCO_wdt.c" * git://www.linux-watchdog.org/linux-watchdog: watchdog: iTCO_wdt.c: fix printk format warnings watchdog: sp805_wdt: Add clk_{un}prepare support watchdog: sp805_wdt: convert to watchdog core hwmon/sch56xx: Depend on watchdog for watchdog core functions watchdog: sch56xx-common: set correct bits in register() Watchdog: DA9052/53 PMIC watchdog support watchdog: sch56xx-common: Add proper ref-counting of watchdog data watchdog: sch56xx: Remove unnecessary checks for register changes watchdog: sch56xx: Use watchdog core watchdog: Add support for dynamically allocated watchdog_device structs watchdog: Add Locking support watchdog: watchdog_dev: Rewrite wrapper code watchdog: use dev_ functions watchdog: create all the proper device files watchdog: Add a flag to indicate the watchdog doesn't reboot things watchdog: Add multiple device support watchdog: watchdog_core.h: make functions extern watchdog: correct the name of the watchdog_core inlude file watchdog: Add watchdog_active() routine watchdog: watchdog_dev: include private header to pickup global symbol prototypes
2012-05-30Merge tag 'iommu-updates-v3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "Not much stuff this time. The only change to the IOMMU core code is the addition of a handle to the fault handling code. A few updates to the AMD IOMMU driver to work around new errata. The other patches are mostly fixes and enhancements to the existing ARM IOMMU drivers and documentation updates. A new IOMMU driver for the Exynos platform was also underway but got merged via the Samsung tree and is not part of this tree." * tag 'iommu-updates-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: Documentation: kernel-parameters.txt Add amd_iommu_dump iommu/core: pass a user-provided token to fault handlers iommu/tegra: gart: Fix register offset correctly iommu: OMAP: device detach on domain destroy iommu: tegra/gart: Add device tree support iommu: tegra/gart: use correct gart_device iommu/tegra: smmu: Print device name correctly iommu/amd: Add workaround for event log erratum iommu/amd: Check for the right TLP prefix bit dma-debug: release free_entries_lock before saving stack trace
2012-05-30Merge branches 'iommu/fixes', 'dma-debug', 'arm/omap', 'arm/tegra', 'core' ↵Joerg Roedel
and 'x86/amd' into next
2012-05-30Documentation: kernel-parameters.txt Add amd_iommu_dumpShuah Khan
Add amd_iommu_dump to kernel-parameters.txt Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-05-30i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLINGMark Brown
Since there are uses for I2C_M_NOSTART which are much more sensible and standard than most of the protocol mangling functionality (the main one being gather writes to devices where something like a register address needs to be inserted before a block of data) create a new I2C_FUNC_NOSTART for this feature and update all the users to use it. Also strengthen the disrecommendation of the protocol mangling while we're at it. In the case of regmap-i2c we remove the requirement for mangling as I2C_M_NOSTART is the only mangling feature which is being used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-05-30Watchdog: DA9052/53 PMIC watchdog supportAshish Jangam
This driver adds support for the watchdog functionality provided by the Dialog Semiconductor DA9052 PMIC chip. Tested on samsung smdkv6410 and i.mx53 QS boards. Signed-off-by: Anthony Olech <Anthony.Olech@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: Add support for dynamically allocated watchdog_device structsHans de Goede
If a driver's watchdog_device struct is part of a dynamically allocated struct (which it often will be), merely locking the module is not enough, even with a drivers module locked, the driver can be unbound from the device, examples: 1) The root user can unbind it through sysfd 2) The i2c bus master driver being unloaded for an i2c watchdog I will gladly admit that these are corner cases, but we still need to handle them correctly. The fix for this consists of 2 parts: 1) Add ref / unref operations, so that the driver can refcount the struct holding the watchdog_device struct and delay freeing it until any open filehandles referring to it are closed 2) Most driver operations will do IO on the device and the driver should not do any IO on the device after it has been unbound. Rather then letting each driver deal with this internally, it is better to ensure at the watchdog core level that no operations (other then unref) will get called after the driver has called watchdog_unregister_device(). This actually is the bulk of this patch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: Add Locking supportHans de Goede
This patch fixes some potential multithreading issues, despite only allowing one process to open the /dev/watchdog device, we can still get called multiple times at the same time, since a program could be using thread, or could share the fd after a fork. This causes 2 potential problems: 1) watchdog_start / open do an unlocked test_n_set / test_n_clear, if these 2 race, the watchdog could be stopped while the active bit indicates it is running or visa versa. 2) Most watchdog_dev drivers probably assume that only one watchdog-op will get called at a time, this is not necessary true atm. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: create all the proper device filesAlan Cox
Create the watchdog class and it's associated devices. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30watchdog: Add multiple device supportAlan Cox
We keep the old /dev/watchdog interface file for the first watchdog via miscdev. This is basically a cut and paste of the relevant interface code from the rtc driver layer tweaked for watchdog. Revised to fix problems noted by Hans de Goede Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-29Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The whole series has been sitting in -next for quite a while with no complaints. The last change to the series was before the weekend the removal of an SPI patch which Grant - even though previously acked by himself - appeared to raise objections. So I removed it until the situation is clarified. Other than that all the patches have the acks from their respective maintainers, all MIPS and x86 defconfigs are building fine and I'm not aware of any problems introduced by this series. Among the key features for this patch series is a sizable patchset for Lantiq which among other things introduces support for Lantiq's flagship product, the FALCON SOC. It also means that the opensource developers behind this patchset have overtaken Lantiq's competing inhouse development team that was working behind closed doors. Less noteworthy the ath79 patchset which adds support for a few more chip variants, cleanups and fixes. Finally the usual dose of tweaking of generic code." Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where printk spelling fixes clashed with file move and eventual removal of the printk. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits) MIPS: lantiq: remove orphaned code MIPS: Remove all -Wall and almost all -Werror usage from arch/mips. MIPS: lantiq: implement support for FALCON soc MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc MTD: MIPS: lantiq: implement OF support watchdog: MIPS: lantiq: implement OF support and minor fixes SERIAL: MIPS: lantiq: implement OF support GPIO: MIPS: lantiq: convert gpio-stp-xway to OF GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder MIPS: pci: convert lantiq driver to OF MIPS: lantiq: convert dma to platform driver MIPS: lantiq: implement support for clkdev api MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq() OF: MIPS: lantiq: implement irq_domain support OF: MIPS: lantiq: implement OF support MIPS: lantiq: drop mips_machine support OF: PCI: const usage needed by MIPS MIPS: Cavium: Remove smp_reserve_lock. MIPS: Move cache setup to setup_arch(). ...
2012-05-29drivers/rtc/rtc-lpc32xx.c: add device tree supportRoland Stigge
Adds device tree support for rtc-lpc32xx.c Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29rtc/spear: add Device Tree probing capabilityViresh Kumar
SPEAr platforms now support DT and so must convert all drivers support DT. This patch adds DT probing support for rtc and updates its documentation too. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Stefan Roese <sr@denx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Rob Herring <robherring2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: add LM3533 LED driverJohan Hovold
Add sub-driver for the LEDs on National Semiconductor / TI LM3533 lighting power chips. The chip provides 256 brightness levels, hardware accelerated blinking as well as ambient-light-sensor and pwm input control. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Rob Landley <rob@landley.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: add new transient trigger for one shot timer activationShuah Khan
The leds timer trigger does not currently have an interface to activate a one shot timer. The current support allows for setting two timers, one for specifying how long a state to be on, and the second for how long the state to be off. The delay_on value specifies the time period an LED should stay in on state, followed by a delay_off value that specifies how long the LED should stay in off state. The on and off cycle repeats until the trigger gets deactivated. There is no provision for one time activation to implement features that require an on or off state to be held just once and then stay in the original state forever. Without one shot timer interface, user space can still use timer trigger to set a timer to hold a state, however when user space application crashes or goes away without deactivating the timer, the hardware will be left in that state permanently. As a specific example of this use-case, let's look at vibrate feature on phones. Vibrate function on phones is implemented using PWM pins on SoC or PMIC. There is a need to activate one shot timer to control the vibrate feature, to prevent user space crashes leaving the phone in vibrate mode permanently causing the battery to drain. This trigger exports three properties, activate, state, and duration When transient trigger is activated these properties are set to default values. - duration allows setting timer value in msecs. The initial value is 0. - activate allows activating and deactivating the timer specified by duration as needed. The initial and default value is 0. This will allow duration to be set after trigger activation. - state allows user to specify a transient state to be held for the specified duration. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: NeilBrown <neilb@suse.de> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29backlight: add LM3533 backlight driverJohan Hovold
Add sub-driver for the backlights on National Semiconductor / TI LM3533 lighting power chips. The chip provides 256 brightness levels and ambient-light-sensor and pwm input control. [akpm@linux-foundation.org: fix warning] [akpm@linux-foundation.org: fix the type of `mode'] Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Rob Landley <rob@landley.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29memcg: move charges to root cgroup if use_hierarchy=0KAMEZAWA Hiroyuki
Presently, at removal of cgroup, ->pre_destroy() is called and moves charges to the parent cgroup. A major reason for returning -EBUSY from ->pre_destroy() is that the 'moving' hits the parent's resource limitation. It happens only when use_hierarchy=0. Considering use_hierarchy=0, all cgroups should be flat. So, no one cannot justify moving charges to parent...parent and children are in flat configuration, not hierarchical. This patch modifes the code to move charges to the root cgroup at rmdir/force_empty if use_hierarchy==0. This will much simplify rmdir() and reduce error in ->pre_destroy. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Glauber Costa <glommer@parallels.com> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29rescounters: add res_counter_uncharge_until()Frederic Weisbecker
When killing a res_counter which is a child of other counter, we need to do res_counter_uncharge(child, xxx) res_counter_charge(parent, xxx) This is not atomic and wastes CPU. This patch adds res_counter_uncharge_until(). This function's uncharge propagates to ancestors until specified res_counter. res_counter_uncharge_until(child, parent, xxx) Now the operation is atomic and efficient. Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Ying Han <yinghan@google.com> Cc: Glauber Costa <glommer@parallels.com> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29memcg: fix/change behavior of shared anon at moving taskKAMEZAWA Hiroyuki
This patch changes memcg's behavior at task_move(). At task_move(), the kernel scans a task's page table and move the changes for mapped pages from source cgroup to target cgroup. There has been a bug at handling shared anonymous pages for a long time. Before patch: - The spec says 'shared anonymous pages are not moved.' - The implementation was 'shared anonymoys pages may be moved'. If page_mapcount <=2, shared anonymous pages's charge were moved. After patch: - The spec says 'all anonymous pages are moved'. - The implementation is 'all anonymous pages are moved'. Considering usage of memcg, this will not affect user's experience. 'shared anonymous' pages only exists between a tree of processes which don't do exec(). Moving one of process without exec() seems not sane. For example, libcgroup will not be affected by this change. (Anyway, no one noticed the implementation for a long time...) Below is a discussion log: - current spec/implementation are complex - Now, shared file caches are moved - It adds unclear check as page_mapcount(). To do correct check, we should check swap users, etc. - No one notice this implementation behavior. So, no one get benefit from the design. - In general, once task is moved to a cgroup for running, it will not be moved.... - Finally, we have control knob as memory.move_charge_at_immigrate. Here is a patch to allow moving shared pages, completely. This makes memcg simpler and fix current broken code. Suggested-by: Hugh Dickins <hughd@google.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29mm: document the meminfo and vmstat fields of relevance to transparent hugepagesMel Gorman
Update Documentation/vm/transhuge.txt and Documentation/filesystems/proc.txt with some information on monitoring transparent huge page usage and the associated overhead. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29mm/fs: remove truncate_rangeHugh Dickins
Remove vmtruncate_range(), and remove the truncate_range method from struct inode_operations: only tmpfs ever supported it, and tmpfs has now converted over to using the fallocate method of file_operations. Update Documentation accordingly, adding (setlease and) fallocate lines. And while we're in mm.h, remove duplicate declarations of shmem_lock() and shmem_file_setup(): everyone is now using the ones in shmem_fs.h. Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29Documentation: memcg: future proof hierarchical statistics documentationJohannes Weiner
The hierarchical versions of per-memcg counters in memory.stat are all calculated the same way and are all named total_<counter>. Documenting the pattern is easier for maintenance than listing each counter twice. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Ying Han <yinghan@google.com> Randy Dunlap <rdunlap@xenotime.net> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29Merge tag 'mfd-3.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "Besides the usual cleanups, this one brings: * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton, ST-E's STAX211, Samsung's MAX77693 and TI's LM3533. * Device tree support for the twl6040, tps65910, da9502 and ab8500 drivers. * Fairly big tps56910, ab8500 and db8500 updates. * i2c support for mc13xxx. * Our regular update for the wm8xxx driver from Mark." Fix up various conflicts with other trees, largely due to ab5500 removal etc. * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits) mfd: Fix build break of max77693 by adding REGMAP_I2C option mfd: Fix twl6040 build failure mfd: Fix max77693 build failure mfd: ab8500-core should depend on MFD_DB8500_PRCMU gpio: tps65910: dt: process gpio specific device node info mfd: Remove the parsing of dt info for tps65910 gpio mfd: Save device node parsed platform data for tps65910 sub devices mfd: Add r_select to lm3533 platform data gpio: Add Intel Centerton support to gpio-sch mfd: Emulate active low IRQs as well as active high IRQs for wm831x mfd: Mark two lm3533 zone registers as volatile mfd: Fix return type of lm533 attribute is_visible mfd: Enable Device Tree support in the ab8500-pwm driver mfd: Enable Device Tree support in the ab8500-sysctrl driver mfd: Add support for Device Tree to twl6040 mfd: Register the twl6040 child for the ASoC codec unconditionally mfd: Allocate twl6040 IRQ numbers dynamically mfd: twl6040 code cleanup in interrupt initialization part mfd: Enable ab8500-gpadc driver for Device Tree mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver ...
2012-05-28Merge branch 'doc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull documentation updates from Jiri Kosina: "I am currently relaying documentation patches through 'doc' branch of trivial tree, until Rob, the new documentation maintainer, has established a proper tree." * 'doc' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: doc: ext3: update documentation with barrier=1 default Documentation/initrd.txt: Change the location of util-linux Documentation/SubmittingPatches: suggested the use of scripts/get_maintainer.pl Documentation/kernel-parameters: remove autotest and mcatest
2012-05-28Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig changes from Michal Marek: - Error handling for make KCONFIG_ALLCONFIG=<...> all*config plus a fix for a bug that was exposed by this - Fix for the script/config utility. * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts/config: properly report and set string options kbuild: all{no,yes,mod,def,rand}config only read files when instructed to. kconfig: Add error handling to KCONFIG_ALLCONFIG
2012-05-28Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek. Fixed up nontrivial merge conflict in Makefile as per Stephen Rothwell and linux-next (and trivial arch/sparc/Makefile changes due to removed sparc32 logic). * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: mips: Fix KBUILD_CPPFLAGS definition kbuild: fix ia64 link kbuild: document KBUILD_LDS, KBUILD_VMLINUX_{INIT,MAIN} and LDFLAGS_vmlinux kbuild: link of vmlinux moved to a script kbuild: refactor final link of sparc32 kbuild: drop unused KBUILD_VMLINUX_OBJS from top-level Makefile kbuild: Makefile: remove unnecessary check for m68knommu ARCH
2012-05-28Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linuxLinus Torvalds
Pull writeback tree from Wu Fengguang: "Mainly from Jan Kara to avoid iput() in the flusher threads." * tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Avoid iput() from flusher thread vfs: Rename end_writeback() to clear_inode() vfs: Move waiting for inode writeback from end_writeback() to evict_inode() writeback: Refactor writeback_single_inode() writeback: Remove wb->list_lock from writeback_single_inode() writeback: Separate inode requeueing after writeback writeback: Move I_DIRTY_PAGES handling writeback: Move requeueing when I_SYNC set to writeback_sb_inodes() writeback: Move clearing of I_SYNC into inode_sync_complete() writeback: initialize global_dirty_limit fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds mm: page-writeback.c: local functions should not be exposed globally
2012-05-26Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds
Pull i2c-embedded changes from Wolfram Sang: "Major changes: - lots of devicetree additions for existing drivers. I tried hard to make sure the bindings are proper. In more complicated cases, I requested acks from people having more experience with them than me. That took a bit of extra time and also some time went into discussions with developers about what bindings are and what not. I have the feeling that the workflow with bindings should be improved to scale better. I will spend some more thought on this... - i2c-muxes are succesfully used meanwhile, so we dropped EXPERIMENTAL for them and renamed the drivers to a standard pattern to match the rest of the subsystem. They can also be used with devicetree now. - ixp2000 was removed since the whole platform goes away. - cleanups (strlcpy instead of strcpy, NULL instead of 0) - The rest is typical driver fixes I assume. All patches have been in linux-next at least since v3.4-rc6." Fixed up trivial conflict in arch/arm/mach-lpc32xx/common.c due to the same patch already having come in through the arm/soc trees, with additional patches on top of it. * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (35 commits) i2c: davinci: Free requested IRQ in remove i2c: ocores: register OF i2c devices i2c: tegra: notify transfer-complete after clearing status. I2C: xiic: Add OF binding support i2c: Rename last mux driver to standard pattern i2c: tegra: fix 10bit address configuration i2c: muxes: rename first set of drivers to a standard pattern of/i2c: implement of_find_i2c_adapter_by_node i2c: implement i2c_verify_adapter i2c-s3c2410: Add HDMIPHY quirk for S3C2440 i2c-s3c2410: Rework device type handling i2c: muxes are not EXPERIMENTAL anymore i2c/of: Automatically populate i2c mux busses from device tree data. i2c: Add a struct device * parameter to i2c_add_mux_adapter() of/i2c: call i2c_verify_client from of_find_i2c_device_by_node i2c: designware: Add clk_{un}prepare() support i2c: designware: add PM support i2c: ixp2000: remove driver i2c: pnx: add device tree support i2c: imx: don't use strcpy but strlcpy ...