summaryrefslogtreecommitdiffstats
path: root/arch/arm/configs
AgeCommit message (Collapse)Author
2011-10-17ARM: 7102/1: mach-integrator: update defconfigLinus Walleij
Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-26Merge branch 'next/devel' of ↵Linus Torvalds
ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits) ARM: S5P64X0: External Interrupt Support ARM: EXYNOS4: Enable MFC on Samsung NURI ARM: EXYNOS4: Enable MFC on universal_c210 ARM: S5PV210: Enable MFC on Goni ARM: S5P: Add support for MFC device ARM: EXYNOS4: Add support FIMD on SMDKC210 ARM: EXYNOS4: Add platform device and helper functions for FIMD ARM: EXYNOS4: Add resource definition for FIMD ARM: EXYNOS4: Change devname for FIMD clkdev ARM: SAMSUNG: Add IRQ_I2S0 definition ARM: SAMSUNG: Add platform device for idma ARM: EXYNOS4: Add more registers to be saved and restored for PM ARM: EXYNOS4: Add more register addresses of CMU ARM: EXYNOS4: Add platform device for dwmci driver ARM: EXYNOS4: configure rtc-s3c on NURI ARM: EXYNOS4: configure MAX8903 secondary charger on NURI ARM: EXYNOS4: configure ADC on NURI ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs ... Fix up tons of silly conflicts: - arch/arm/mach-davinci/include/mach/psc.h - arch/arm/mach-exynos4/Kconfig - arch/arm/mach-exynos4/mach-smdkc210.c - arch/arm/mach-exynos4/pm.c - arch/arm/mach-imx/mm-imx1.c - arch/arm/mach-imx/mm-imx21.c - arch/arm/mach-imx/mm-imx25.c - arch/arm/mach-imx/mm-imx27.c - arch/arm/mach-imx/mm-imx31.c - arch/arm/mach-imx/mm-imx35.c - arch/arm/mach-mx5/mm.c - arch/arm/mach-s5pv210/mach-goni.c - arch/arm/mm/Kconfig
2011-07-25Merge branch 'next/deletion' of ↵Linus Torvalds
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/deletion' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: mach-loki: delete ARM: mach-s3c2400: delete ARM: mach-s3c24a0: delete
2011-07-25Merge branch 'next/cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (133 commits) ARM: EXYNOS4: Change devname for FIMD clkdev ARM: S3C64XX: Cleanup mach/regs-fb.h from mach-s3c64xx ARM: S5PV210: Cleanup mach/regs-fb.h from mach-s5pv210 ARM: S5PC100: Cleanup mach/regs-fb.h from mach-s5pc100 ARM: S3C24XX: Use generic s3c_set_platdata for devices ARM: S3C64XX: Use generic s3c_set_platdata for OneNAND ARM: SAMSUNG: Use generic s3c_set_platdata for NAND ARM: SAMSUNG: Use generic s3c_set_platdata for USB OHCI ARM: SAMSUNG: Use generic s3c_set_platdata for HWMON ARM: SAMSUNG: Use generic s3c_set_platdata for FB ARM: SAMSUNG: Use generic s3c_set_platdata for TS ARM: S3C64XX: Add PWM backlight support on SMDK6410 ARM: S5P64X0: Add PWM backlight support on SMDK6450 ARM: S5P64X0: Add PWM backlight support on SMDK6440 ARM: S5PC100: Add PWM backlight support on SMDKC100 ARM: S5PV210: Add PWM backlight support on SMDKV210 ARM: EXYNOS4: Add PWM backlight support on SMDKC210 ARM: EXYNOS4: Add PWM backlight support on SMDKV310 ARM: SAMSUNG: Create a common infrastructure for PWM backlight support clocksource: convert 32-bit down counting clocksource on S5PV210/S5P64X0 ... Fix up trivial conflict in arch/arm/mach-imx/mach-scb9328.c
2011-07-25Merge branch 'next/fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (35 commits) ARM: msm: platsmp: determine number of CPU cores at boot time ARM: Tegra: Seaboard: Fix I2C bus numbering for ADT7461 ARM: Tegra: Trimslice: Tri-state DAP3 pinmux ARM: orion5x: fixup 5181 MPP mask check ARM: mxs-dma: include <linux/dmaengine.h> ARM: i.MX53: consistently use MX53_UART_PAD_CTRL for uart txd/rxd/rts/cts ARM: i.MX53: UARTn_CTS pin should not change RTS input select ARM: i.MX53: UARTn_TXD pin should not change RXD input select ARM: mx25: Fix typo on CAN1_RX pad setting iomux-mx53: add missing 'IOMUX_CONFIG_SION' for some I2C pad definitions ARM: NUC93X: add UL suffix to VMALLOC_END to ensure it is properly typed ARM: LPC32XXX: add UL suffix to VMALLOC_END to ensure it is properly typed ARM: CNS3XXX: add UL suffix to VMALLOC_END to ensure it is properly typed ARM: i.MX53: Fix IOMUX type o's ARM i.MX dma: Fix burstsize settings mach-mx5: fix the I2C clock parents ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0 ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.h ARM: mx53: Fix some interrupts marked as reserved. MXC: iomux-v3: correct NO_PAD_CTRL definition ... Fix up trivial conflict in arch/arm/mach-imx/mach-mx31_3ds.c
2011-07-20ARM: mmp2: update mmp2_defconfig to support mmcZhangfei Gao
1. support brownstone 2. support mmc 3. support basic filesystem and language 4. remove dynamic_debug, since too many log during access sd Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-18ARM: mach-loki: deleteNicolas Pitre
This was introduced more than 3 years ago, and since then only generic janitorial changes were made without further addition of actual support for "real" devices. This is therefore a cost with no benefits to keep in the tree. If someone wishes to revive this code, it is always possible to retrieve it from the Git repository. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> CC: Ke Wei <kewei@marvell.com> CC: Saeed Bishara <saeed@marvell.com> CC: Lennert Buytenhek <buytenh@wantstofly.org>
2011-07-17Merge branches 'cns3xxx/devel', 'davinci/devel', 'imx/devel', ↵Arnd Bergmann
'lpc32xx/devel', 'pxa/devel', 'tegra/devel' and 'stericsson/master' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into next/devel
2011-07-17Merge branches 'davinci/cleanup', 'imx/cleanup', 'omap/cleanup' and ↵Arnd Bergmann
'pxa/cleanup' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into next/cleanup
2011-07-11ARM: pxa/cm-x300: update cm_x300_defconfigIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-07ARM: mxs_defconfig: Add mx23evk and mx28evk buildShawn Guo
The patch adds following configurations to enable build of mx23evk and mx28evk in defconfig. CONFIG_MACH_MX23EVK CONFIG_MACH_MX28EVK Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07mx51: Let USB Storage be built by defaultFabio Estevam
Let USB Storage be built by default. Also select NLS_ISO8859 so that the USB device can be mounted. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxs_defconfig: Change CONFIG_RTC_CLASS 'm' to 'y'Shawn Guo
The patch fixes the warning below. arch/arm/configs/mxs_defconfig:92:warning: symbol value 'm' invalid for RTC_CLASS Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-06-23mach-ux500: add configs for snowball boardRobert Marklund
Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21mach-ux500: activate USB in the U8500 defconfigLinus Walleij
Activate the new USB stuff so we atleast get some compile coverage for this stuff. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-06-15rtc: fix build warnings in defconfigsWanlong Gao
RTC_CLASS is changed to bool, so 'm' is invalid. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) ARM: 6945/1: Add unwinding support for division functions ARM: kill pmd_off() ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks ARM: 6943/1: mm: use TTBR1 instead of reserved context ID ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7 ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area ARM: add sendmmsg syscall ARM: 6863/1: allow hotplug on msm ARM: 6832/1: mmci: support for ST-Ericsson db8500v2 ARM: 6830/1: mach-ux500: force PrimeCell revisions ARM: 6829/1: amba: make hardcoded periphid override hardware ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID ARM: 6827/1: mach-netx: delete hardcoded periphid ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2 ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM at91: drop at572d940hf support at91rm9200: introduce at91rm9200_set_type to specficy cpu package at91: drop boot_params and PLAT_PHYS_OFFSET ...
2011-05-26Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits) OMAP3: PM: Boot message is not an error, and not helpful, remove it OMAP3: cpuidle: change the power domains modes determination logic OMAP3: cpuidle: code rework for improved readability OMAP3: cpuidle: re-organize the C-states data OMAP3: clean-up mach specific cpuidle data structures OMAP3 cpuidle: remove useless SDP specific timings usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled usb: otg: OMAP4430: Fixing the omap4430_phy_init function usb: musb: am35x: fix compile error when building am35x usb: musb: OMAP4430: Power down the PHY during board init omap: drop board-igep0030.c omap: igep0020: add support for IGEP3 omap: igep0020: minor refactoring omap: igep0020: name refactoring for future merge with IGEP3 omap: Remove support for omap2evm arm: omap2plus: GPIO cleanup omap: musb: introduce default board config omap: move detection of NAND CS to common-board-devices omap: use common initialization for PMIC i2c bus omap: consolidate touch screen initialization among different boards ...
2011-05-26Merge branch 'for-rmk' of git://github.com/at91linux/linux-2.6-at91 into ↵Russell King
devel-stable
2011-05-25Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/Kconfig arch/arm/mach-exynos4/mach-nuri.c
2011-05-25at91: drop at572d940hf supportJean-Christophe PLAGNIOL-VILLARD
no-one use it and it's nearly impossible get a board to work on it and the Mainline implementation was never finished Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Cc: Andrew Victor <linux@maxim.org.za>
2011-05-25at91sam9261: rename at91sam9261ek to at91sam9261 defconfigJean-Christophe PLAGNIOL-VILLARD
and update it with ubi, sound, nfs support etc... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-05-25at91sam9263: merge all boards defconfig into only oneJean-Christophe PLAGNIOL-VILLARD
Tested on at91sam9263ek Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Grégory Hermant <gregory.hermant@calao-systems.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-05-23Merge branch 'devel-stable' into for-linusRussell King
Conflicts: arch/arm/Kconfig arch/arm/mach-ns9xxx/include/mach/uncompress.h
2011-05-23Merge branches 'consolidate', 'ep93xx', 'fixes', 'misc', 'mmci', 'remove' ↵Russell King
and 'spear' into for-linus
2011-05-23Merge branches 'consolidate-clksrc', 'consolidate-flash', ↵Russell King
'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
2011-05-20ARM: 6933/1: SPEAR6xx: Rename spear600_defconfig as spear6xx_defconfigviresh kumar
Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20ARM: 6932/1: SPEAr3xx: Replace defconfigs with single unified defconfigRyan Mallon
We only need one defconfig for SPEAr3xx now since we can build all three boards into one kernel. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20ARM: 6907/1: Versatile: Use physmap driver instead of integrator-flashMarc Zyngier
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20ARM: 6903/1: Realview: Use physmap driver instead of integrator-flashMarc Zyngier
Tested on a PB11-MPCore. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King
devel-stable
2011-05-19MX1: Add ARMadeus Systems APF9328 board supportGwenhael Goavec-Merou
APF9328 is an i.MXL based SOM (System On Module) that can be plugged on several docking/development boards. Here only basic module support is added (Ethernet, Serial, NOR Flash). Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org> Signed-off-by: Nicolas Colombain <nicolas.colombain@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19ARM: mxc: don't allow to compile together i.MX51 and i.MX53Uwe Kleine-König
The two SoCs have different PHYS_OFFSETs so it's not (yet) possible to compile a single (working) kernel for these. LAKML-Reference: 1302464943-20721-4-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-17Merge branches 'devel-fixes', 'devel-cleanup' and 'devel-genirq' into for-nextTony Lindgren
2011-05-16Merge branch 'dev/removing-s5p6442' into for-nextKukjin Kim
2011-05-12ARM: S5P6442: Removing ARCH_S5P6442Kukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-05-11Merge branch 'gic-fasteoi' of git://linux-arm.org/linux-2.6-wd into devel-stableRussell King
2011-05-06ARM: exynos4_defconfig: Update for adding machinesKukjin Kim
This patch adds MACH_ARMLEX4210 and MACH_NURI in exynos4_defconfig. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-05-03ARM: Sync Marvell Dove defconfig with latest kernelKonstantin Porotchkin
Re-generate defconfig for Marvell Dove platform Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-03ARM: Moving Marvell Dove platform defaults to ARMv7Konstantin Porotchkin
Disabled legacy support for ARMv6 architecture on Dove platform. Latest Dove HW uses only ARMv7 model. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-05-03omap: Run make savedefconfig on omap2plus_defconfig to shrink itTony Lindgren
After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-02ARM: mach-stmp378x: remove machWolfram Sang
This mach has not seen any updates since the initial inclusion besides generic cleanup. Furthermore: - The i.MX23 covered in mach-mxs is just a renamed version of the STMP378x. - mach-stmp378x has a lot of reinvented interfaces, leaking all sorts of mach-related includes into the drivers. One example is the dmaengine which does not use the linux dmaengine-API but some privately exported symbols. So drivers cannot be reused. mach-mxs does it better. - There is only one board defined (which I couldn't find any trace of despite being a development board). It has been converted to mach-mxs in a previous patch. Since the only user of this mach was converted, it means that mach-stmp378x can go. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-02ARM: mach-stmp37xx: remove machWolfram Sang
This mach has not seen any updates since the initial inclusion besides generic cleanup. Furthermore: - It has a lot of reinvented interfaces, leaking all sorts of mach-related includes into the drivers. One example is the dmaengine which does not use the linux dmaengine-API but some privately exported symbols. So, drivers cannot be reused. mach-mxs is very similar and does it better. - It can be doubted that this worked at all. Check the DMA routines in stmp37xx.c for copy/paste bugs. A lot of APBX-related stuff is actually writing into registers for APBH. - There is only one board defined (which I couldn't find any trace of despite being a development board). In this board, only two devices have resources, the debug uart and the application uart. Neither of those have the needed custom drivers merged (and never will). debug uart is amba-pl011 which has an in-kernel driver without the mach-specific-stuff. appuart has a driver which was introduced for mach-mxs, and this one is reusable for a properly done mach. So, this single board registers only unsupported devices and the generic code looks suspicious and has poor design. Delete this stuff. If there is interest, it is wiser to restart using mach-mxs. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-02ARM: configs: add defconfig for mach-mxsWolfram Sang
Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-28ARM: 6888/1: remove ns9xxx portUwe Kleine-König
The port is actually unmaintained and only received global cleanups and a few build fixes since mid 2008. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-23arm: at91: minimal defconfig for at91x40 SoCGreg Ungerer
A minimal defconfig for build testing the AT91x40 SoC. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-24Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegraLinus Torvalds
* 'for-linus' of git://android.git.kernel.org/kernel/tegra: ARM: tegra: harmony: initialize the TPS65862 PMIC ARM: tegra: update defconfig ARM: tegra: harmony: update PCI-e initialization sequence ARM: tegra: trimslice: enable MMC/SD slots ARM: tegra: enable new drivers in defconfig ARM: tegra: Add Toshiba AC100 support ARM: tegra: harmony: Set WM8903 gpio_base ARM: tegra: harmony: I2C-related portions of audio support ARM: tegra: harmony: register i2c devices ARM: tegra: seaboard: register i2c devices ARM: tegra: harmony: Beginnings of audio support ARM: tegra: create defines for SD-related GPIO names ARM: tegra: add devices.c entries for audio
2011-03-22Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linuxPaul Mundt
Conflicts: arch/arm/mach-omap2/board-overo.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-17Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
2011-03-17Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 02:39:14 +0000