summaryrefslogtreecommitdiffstats
path: root/arch/arm/configs
AgeCommit message (Collapse)Author
2006-07-15[ARM] 3730/1: ep93xx: enable usb ohci driver in the defconfigLennert Buytenhek
Patch from Lennert Buytenhek Since the ep93xx ohci bits are merged upstream now, enable ohci in the ep93xx defconfig. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-11[ARM] 3726/1: update {ep93xx,ixp2000,ixp23xx,lpd270,onearm} defconfigs to ā†µLennert Buytenhek
2.6.18-rc1 Patch from Lennert Buytenhek Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01[ARM] 3677/1: OMAP: Update H2 defconfigTony Lindgren
Patch from Tony Lindgren Update OMAP H2 defconfig and leave out hw random for now until it's been updated. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29[ARM] 3666/1: TRIZEPS4 [1/5] coreJürgen Schindele
Patch from Jürgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jürgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29[ARM] 3675/2: Preparing for AT91SAM926 supportAndrew Victor
Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26[ARM] 3654/1: add ajeco 1arm sbc supportLennert Buytenhek
Patch from Lennert Buytenhek This patch adds support for the Ajeco 1ARM Single Board Computer, a VME form factor SBC based on the Atmel AT91 SoC, with 64M RAM, seven serial ports, three ethernet ports, IDE, CF, USB host and device, and S-Video/VGA out.-- Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26[ARM] 3650/1: S3C2412: Update s3c2410_defconfigBen Dooks
Patch from Ben Dooks Add SMDK2413 to the list of the machines being built for ARCH_S3C2410, thus ensursing our all machines build has an representitive of the S3C2412/S3C2413 CPU series-- Signed-off-by: Ben Dooks <ben-linux@fluff.org>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22[ARM] 3618/1: add defconfig for logicpd pxa270 card engineLennert Buytenhek
Patch from Lennert Buytenhek As it's slightly nontrivial to make it possible to build a single kernel image for both the mainstone and the logicpd pxa270 card engine, add a separate defconfig for the logicpd pxa270 card engine for now. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20Merge S3Cxxxx branchRussell King
2006-06-20Merge AT91 branchRussell King
2006-06-20[ARM] 3609/1: S3C24XX: defconfig update for s3c2410_defconfigBen Dooks
Patch from Ben Dooks Update s3c2410_defconfig to latest kernel with the latest patches Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20[ARM] 3604/1: AT91RM9200 New boardsAndrew Victor
Patch from Andrew Victor This patch adds support for an additional 4 AT91RM9200-based boards: 1. Conitec ARM&EVA [MACH_CARMEVA] (http://www.conitec.net/english/linuxboard.htm) 2. KwikByte KB920x [MACH_KB9200] (http://kwikbyte.com/KB9202_description_new.htm) 3. Embest ATEB9200 [MACH_ATEB9200] (http://www.embedinfo.com/english/product/ATEB9200.asp) 4. Sperry-Sun KAFA board [MACH_KAFA] (unknown) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3577/1: netX: Default config for netx based boardsSascha Hauer
Patch from Sascha Hauer This patch adds the default config file for netx based boards. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfigVitaly Wool
Patch from Vitaly Wool This patch adds default configuration file PNX4008 ARM platform. It\'s basically the same as the previos one. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3403/1: lpd7a40x: updated default configurationsMarc Singer
Patch from Marc Singer Revised default configuration files. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-09[ARM] 3508/1: Update collie defconfigPavel Machek
Patch from Pavel Machek Update collie defconfig to something that can bring closer-to-working system to its user. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-08[ARM] Update versatile_defconfigRussell King
Update versatile default configuration, enabling the AACI sound driver, VFP and Versatile AB support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-20[ARM] 3483/1: ixp23xx: update defconfig to 2.6.17-rc2Lennert Buytenhek
Patch from Lennert Buytenhek Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-20[ARM] 3482/1: ixp2000: update defconfig to 2.6.17-rc2Lennert Buytenhek
Patch from Lennert Buytenhek Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-20[ARM] 3481/1: ep93xx: update defconfig to 2.6.17-rc2Lennert Buytenhek
Patch from Lennert Buytenhek Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3395/2: AT91RM9200 Dataflash Card vs MMC selectionAndrew Victor
Patch from Andrew Victor On the Atmel AT91RM9200-DK and -EK boards, a pin is used to control whether the card socket is used for a DataFlash Card or an MMC/SD card. We now default to MMC/SD in the configuration files. (This version of the patch can be applied before Patch 3392/1) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28[ARM] 3387/1: ixp23xx: add defconfigLennert Buytenhek
Patch from Lennert Buytenhek Add ixp23xx defconfig. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22[ARM] 3382/1: ixp2000: unify defconfigsLennert Buytenhek
Patch from Lennert Buytenhek Unify the five existing ixp2000 defconfigs into one defconfig. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3376/2: S3C2410 - update defconfigBen Dooks
Patch from Ben Dooks Add Simtec Osiris to the default build, and enable the USB-OHCI section by default. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3372/1: ep93xx: add defconfigLennert Buytenhek
Patch from Lennert Buytenhek Add ep93xx defconfig. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3306/1: S3C24XX - update defconfigBen Dooks
Patch from Ben Dooks Bring s3c2410 defconfig up to date Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3302/1: make pci=firmware the default for ixp2000Lennert Buytenhek
Patch from Lennert Buytenhek Most ixp2000 boards don't actually work if pci=firmware isn't used, so the defconfig isn't really the right place to specify this. Instead of specifying it in the defconfigs, make the relevant board code take care of setting pci=firmware. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3301/1: remove unnecessary clock default from ixdp2801 defconfigLennert Buytenhek
Patch from Lennert Buytenhek The ixdp2x01_clock is already 50MHz by default, so no need to override it with 50MHz in the ixdp2801 defconfig as is done now, which is confusing as well. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-03[ARM] Remove ARCH_CAMELOT from at91 defconfigsRussell King
ARCH_CAMELOT (excalibur) got removed; remove it from the AT91 defconfigs Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19[ARM] Remove CONFIG_BROKEN=y from defconfigsRussell King
Remove CONFIG_BROKEN=y from the ARM defconfigs, and update with the appropriate changes. This results in only some unselected configuration symbols being removed - hence no material effect on the configuration. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-18[PATCH] e1000: Added disable packet split capabilityJesse Brandeburg
Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-10[ARM] 3247/1: AT91RM9200 support for 2.6 (Cogent CSB337 & CSB637 boards) (PatchAndrew Victor
#3244) Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the support for the Cogent CSB337 and CSB637 boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-10[ARM] 3243/2: AT91RM9200 support for 2.6 (Atmel DK & EK boards)Andrew Victor
Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the support for Atmel's DK and EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09[ARM] Remove CONFIG_ARCH_CAMELOT from defconfigsRussell King
EPXA10DB has gone, no need to keep the symbol in the defconfigs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-08[ARM] Remove EPXA10DB machine supportRussell King
EPXA10DB seems to be uncared for: - the "PLD" code has never been merged - no one has reported that this platform has been broken since at least 2.6.10 - interest seems to have dried up around March 2003. Therefore, remove EPXA10DB support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[ARM] 3221/1: Update IXP4xx defconfigDeepak Saxena
Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-01[ARM] 3188/1: Add missing i2c dependency for AkitaRichard Purdie
Patch from Richard Purdie Akita requires inbuilt kernel i2c support for its GPIOs. Add this requirement to Kconfig and update the defconfig to match. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-28[ARM] 3180/1: Update Zaurus defconfigsRichard Purdie
Patch from Richard Purdie This updates the Zaurus defconfigs. Poodle gets merged into corgi_defconfig and support for tosa and akita is enabled. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-16[ARM] 3162/1: S3C2410 - updated defconfigBen Dooks
Patch from Ben Dooks Minor changes, including add SysRq, selecting the DM9000 as a built-in driver, not as a module, and selecting the framebuffer. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-11[ARM] 3147/1: update ixp2000 defconfigs to 2.6.14-git13Lennert Buytenhek
Patch from Lennert Buytenhek Update the ixp2000 defconfigs to 2.6.14-git13. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3144/1: OMAP 5/5: Update omap H2 defconfigTony Lindgren
Patch from Tony Lindgren This patch updates omap H2 defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-04[PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfromRussell King
No longer maintained
2005-11-03[ARM] Fix IXDP2x01 config filesDeepak Saxena
IXDP2401 config file has wrong baudrate and both boards have 3 UARTs. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-03[ARM] Add Realview default configuration fileRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-01[ARM] 3081/1: Remove GTWX5715 from ixp4xx_defconfigDeepak Saxena
Patch from Deepak Saxena CONFIG_MACH_GTWX5715 hardcodes the machine type in head-xscale.S so we can no longer boot on any other machine types. The proper fix would be to remove the hardcoding, but that machine is an off-the-shelf system and most users won't have access to the bootloader. :( Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30[ARM] fix ixp2x00 defconfig NR_UARTS optionsDeepak Saxena
IXDP2[48]00 have only 1 UART on the board. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 2918/1: [update] Base port of Comdial MP1000 platfromJon Ringle
Patch from Jon Ringle Updated 2898/1 per comments: - Removed fixup - Moved code in mach-mp1000/ to mach-clps711x/ - Cleaned up code in mp1000-seprom.c. Eliminated code that displayed the contents of the eeprom Please comment. Signed-off-by: Jon Ringle Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10[ARM] 2968/1: defconfig for the ARM Collie platformVincent Sanders
Patch from Vincent Sanders Add a defconfig for the ARM Collie platform Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10[ARM] 2967/1: defconfig for the ARM Corgi platformVincent Sanders
Patch from Vincent Sanders Add a defconfig for the ARM Corgi Zarus platform Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10[ARM] 2966/1: defconfig for the ARM Poodle platformVincent Sanders
Patch from Vincent Sanders Add a defconfig for the ARM Poodle Zarus platform Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 11:40:09 +0000