summaryrefslogtreecommitdiffstats
path: root/arch/arm/kernel/traps.c
AgeCommit message (Collapse)Author
2010-07-09ARM: 6207/1: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6Tony Lindgren
The TLS register is only available on ARM1136 r1p0 and later. Set HWCAP_TLS flags if hardware TLS is available and test for it if CONFIG_CPU_32v6K is not set for V6. Note that we set the TLS instruction in __kuser_get_tls dynamically as suggested by Jamie Lokier <jamie@shareable.org>. Also the __switch_to code is optimized out in most cases as suggested by Nicolas Pitre <nico@fluxnic.net>. Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: add notify_die() supportRussell King
Kernel debuggers want to be informed of die() events, so that they can take some action to allow the problem to be inspected. Provide the hook in a similar manner to x86. Note that we currently don't implement the individual trap hooks. Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-10ARM: Use a definition for the userspace cmpxchg emulation syscallRussell King
Use a definition for the cmpxchg SWI instead of hard-coding the number. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@fluxnic.net>
2009-11-08[ARM] Fix test for unimplemented ARM syscallsRussell King
The existing test always failed since 'no' was always greater than 0x7ff. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-25ARM: Fix signal restart issues with NX and OABI compatRussell King
The signal restarting code was placed on the user stack when OABI compatibility is enabled. Unfortunately, with an EABI NX executable, this results in an attempt to run code from the non-executable stack, which segfaults the application. Fix this by placing the code in the vectors page, along side the signal return code, and directing the application to that code. Reported-by: saeed bishara <saeed.bishara@gmail.com> Tested-by: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11ARM: update die() outputRussell King
Make die() better match x86: - add printing of the last accessed sysfs file - ensure console_verbose() is called under the lock - ensure we panic outside of oops_exit() Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11ARM: Dump code/mem oops lines with the appropriate log levelRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11ARM: Dump memory and backtrace as one printk per lineRussell King
dump_mem and dump_backtrace were both using multiple printk statements to print each line. With DEBUG_LL enabled, this causes OOPS to become very difficult to read. Solve this by only using one printk per line. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-28ARM: Ensure do_cache_op takes mmap_semRussell King
do_cache_op() uses find_vma() to validate its arguments without holding any locking. This means that the VMA could vanish beneath us. Fix this by taking a read lock on mmap_sem. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19[ARM] 5383/2: unwind: Add core support for ARM stack unwindingCatalin Marinas
This patch adds the main functionality for parsing the stack unwinding information generated by the ARM EABI toolchains. The unwinding information consists of an index with a pair of words per function and a table with unwinding instructions. For more information, see "Exception Handling ABI for the ARM Architecture" at: http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12[ARM] 5381/1: unwind: Reorganise the traps.c codeCatalin Marinas
This patch moves code around in the arch/arm/kernel/traps.c file for easier integration of the stack unwinding support. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-15[ARM] Ensure linux/hardirqs.h is included where requiredRussell King
... for the removal of it from asm-generic/local.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-06[ARM] Convert asm/uaccess.h to linux/uaccess.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05[ARM] sparse: fix several warningsRussell King
arch/arm/kernel/process.c:270:6: warning: symbol 'show_fpregs' was not declared. Should it be static? This function isn't used, so can be removed. arch/arm/kernel/setup.c:532:9: warning: symbol 'len' shadows an earlier one arch/arm/kernel/setup.c:524:6: originally declared here A function containing two 'len's. arch/arm/mm/fault-armv.c:188:13: warning: symbol 'check_writebuffer_bugs' was not declared. Should it be static? arch/arm/mm/mmap.c:122:5: warning: symbol 'valid_phys_addr_range' was not declared. Should it be static? arch/arm/mm/mmap.c:137:5: warning: symbol 'valid_mmap_phys_addr_range' was not declared. Should it be static? Missing includes. arch/arm/kernel/traps.c:71:77: warning: Using plain integer as NULL pointer arch/arm/mm/ioremap.c:355:46: error: incompatible types in comparison expression (different address spaces) Sillies. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-01[ARM] 5206/1: remove kprobe_trap_handler() hackNicolas Pitre
As mentioned in commit 796969104cab0d454dbc792ad0d12a4f365a8564, and because of commit b03a5b7559563dafdbe52f8b5d8e453a914db941, the direct calling of kprobe_trap_handler() can be removed. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-12[ARM] traps: don't call undef hook functions with spinlock heldRussell King
Calling the undefined instruction handler functions with a spinlock held is a recipe for must_sleep() warnings. Avoid it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-23kgdb: support for ARCH=armJason Wessel
This patch adds the ARCH=arm specific a kgdb backend, originally written by Deepak Saxena <dsaxena@plexity.net> and George Davis <gdavis@mvista.com>. Geoff Levand <geoffrey.levand@am.sony.com>, Nicolas Pitre, Manish Lachwani, and Jason Wessel have contributed various fixups here as well. The KGDB patch makes one change to the core ARM architecture such that the traps are initialized early for use with the debugger or other subsystems. [ mingo@elte.hu: small cleanups. ] [ ben-linux@fluff.org: fixed early_trap_init ] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Deepak Saxena <dsaxena@plexity.net>
2008-01-26ARM kprobes: special hook for the kprobes breakpoint handlerNicolas Pitre
The kprobes code is already able to cope with reentrant probes, so its handler must be called outside of the region protected by undef_lock. If ever this lock is released when handlers are called then this commit could be reverted. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-01-26ARM kprobes: prevent some functions involved with kprobes from being probedNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2007-11-26[ARM] 4659/1: remove possibilities for spurious false negative with ↵Nicolas Pitre
__kuser_cmpxchg The ARM __kuser_cmpxchg routine is meant to implement an atomic cmpxchg in user space. It however can produce spurious false negative if a processor exception occurs in the middle of the operation. Normally this is not a problem since cmpxchg is typically called in a loop until it succeeds to implement an atomic increment for example. Some use cases which don't involve a loop require that the operation be 100% reliable though. This patch changes the implementation so to reattempt the operation after an exception has occurred in the critical section rather than abort it. Here's a simple program to test the fix (don't use CONFIG_NO_HZ in your kernel as this depends on a sufficiently high interrupt rate): #include <stdio.h> typedef int (__kernel_cmpxchg_t)(int oldval, int newval, int *ptr); #define __kernel_cmpxchg (*(__kernel_cmpxchg_t *)0xffff0fc0) int main() { int i, x = 0; for (i = 0; i < 100000000; i++) { int v = x; if (__kernel_cmpxchg(v, v+1, &x)) printf("failed at %d: %d vs %d\n", i, v, x); } printf("done with %d vs %d\n", i, x); return 0; } Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-26[ARM] 4661/1: fix do_undefinstr wrt the enabling of IRQsNicolas Pitre
The lock is acquired with spin_lock_irqsave() and released in the not-found case with spin_unlock_irqrestore(). Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-19Use helpers to obtain task pid in printks (arch code)Alexey Dobriyan
One of the easiest things to isolate is the pid printed in kernel log. There was a patch, that made this for arch-independent code, this one makes so for arch/xxx files. It took some time to cross-compile it, but hopefully these are all the printks in arch code. Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26[ARM] Remove CONFIG_IGNORE_FIQRussell King
IGNORE_FIQ does not appear in the Kconfig files, so can be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-17Report that kernel is tainted if there was an OOPSPavel Emelianov
If the kernel OOPSed or BUGed then it probably should be considered as tainted. Thus, all subsequent OOPSes and SysRq dumps will report the tainted kernel. This saves a lot of time explaining oddities in the calltraces. Signed-off-by: Pavel Emelianov <xemul@openvz.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Added parisc patch from Matthew Wilson -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-05[ARM] always allow dump_stack() to produce a backtraceRussell King
Don't make this dependent on CONFIG_DEBUG_KERNEL - if we hit a WARN_ON we need the stack trace to work out how we got to that point. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-17[ARM] Add support for pause_on_oops and display preempt/smp optionsRussell King
Add calls to oops_enter() and oops_exit() to __die(), so that things like lockdep know when an oops occurs. Add suffixes to the oops report to indicate whether the running kernel has been built with preempt or smp support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08move die notifier handling to common codeChristoph Hellwig
This patch moves the die notifier handling to common code. Previous various architectures had exactly the same code for it. Note that the new code is compiled unconditionally, this should be understood as an appel to the other architecture maintainer to implement support for it aswell (aka sprinkling a notify_die or two in the proper place) arm had a notifiy_die that did something totally different, I renamed it to arm_notify_die as part of the patch and made it static to the file it's declared and used at. avr32 used to pass slightly less information through this interface and I brought it into line with the other architectures. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix vmalloc_sync_all bustage] [bryan.wu@analog.com: fix vmalloc_sync_all in nommu] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-03[ARM] 4356/1: arm: fix handling of svc mode undefined instructionsDan Williams
Now that do_undefinstr handles kernel and user mode undefined instruction exceptions it must not assume that interrupts are enabled at entry. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21[ARM] Remove needless linux/ptrace.h includesRussell King
Lots of places in arch/arm were needlessly including linux/ptrace.h, resumably because we used to pass a struct pt_regs to interrupt handlers. Now that we don't, all these ptrace.h includes are redundant. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21[ARM] Add ability to dump exception stacks to kernel backtracesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4183/1: do_undefinstr: read svc undefined instructions with svc privilegesDan Williams
do_undefinstr currently does not expect undefined instructions in kernel code, since it always uses get_user() to read the instruction. Dereference the 'pc' pointer directly in the SVC case. Per Nicolas Pitre's note, kernel code is never in thumb mode. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-06[ARM] Move processor_modes[] to .../process.cRussell King
bad_mode() currently prints the mode which caused the exception, and then causes an oops dump to be printed which again displays this information (since the CPSR in the struct pt_regs is correct.) This leads to processor_modes[] being shared between traps.c and process.c with a local declaration of it. We can clean this up by moving processor_modes[] to process.c and removing the duplication, resulting in processor_modes[] becoming static. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-06[ARM] 4070/1: arch/arm/kernel: fix warnings from missing includesBen Dooks
Include <asm/io.h> to fix the warning: arch/arm/kernel/traps.c:647:6: warning: symbol '__readwrite_bug' was not declared. Should it be static? Include <linux/mc146818rtc.h> to fix the warning: arch/arm/kernel/time.c:42:1: warning: symbol 'rtc_lock' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 3983/2: remove unused argument to __bug()Nicolas Pitre
It appears that include/asm-arm/bug.h requires include/linux/stddef.h for the definition of NULL. It seems that stddef.h was always included indirectly in most cases, and that issue was properly fixed a while ago. Then commit 5047f09b56d0bc3c21aec9cb16de60283da645c6 incorrectly reverted change from commit ff10952a547dad934d9ed9afc5cf579ed1ccb53a (bad dwmw2) and the problem recently resurfaced. Because the third argument to __bug() is never used anyway, RMK suggested getting rid of it entirely instead of readding #include <linux/stddef.h> which this patch does. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-20[ARM] 3759/2: Remove uses of %?Daniel Jacobowitz
Patch from Daniel Jacobowitz The ARM kernel has several uses of asm("foo%?"). %? is a GCC internal modifier used to output conditional execution predicates. However, no version of GCC supports conditionalizing asm statements. GCC 4.2 will correctly expand %? to the empty string in user asms. Earlier versions may reuse the condition from the previous instruction. In 'if (foo) asm ("bar%?");' this is somewhat likely to be right... but not reliable. So, the only safe thing to do is to remove the uses of %?. I believe the tlbflush.h occurances were supposed to be removed before, based on the comment about %? not working at the top of that file. Old versions of GCC could omit branches around user asms if the asm didn't mark the condition codes as clobbered. This problem hasn't been seen on any recent (3.x or 4.x) GCC, but it could theoretically happen. So, where %? was removed a cc clobber was added. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-14[PATCH] Change panic_on_oops message to "Fatal exception"Horms
Previously the message was "Fatal exception: panic_on_oops", as introduced in a recent patch whith removed a somewhat dangerous call to ssleep() in the panic_on_oops path. However, Paul Mackerras suggested that this was somewhat confusing, leadind people to believe that it was panic_on_oops that was the root cause of the fatal exception. On his suggestion, this patch changes the message to simply "Fatal exception". A suitable oops message should already have been displayed. Signed-off-by: Simon Horman <horms@verge.net.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-31[PATCH] panic_on_oops: remove ssleep()Horms
This patch is part of an effort to unify the panic_on_oops behaviour across all architectures that implement it. It was pointed out to me by Andi Kleen that if an oops has occured in interrupt context, then calling sleep() in the oops path will only cause a panic, and that it would be really better for it not to be in the path at all. This patch removes the ssleep() call and reworks the console message accordinly. I have a slght concern that the resulting console message is too long, feedback welcome. For powerpc it also unifies the 32bit and 64bit behaviour. Fror x86_64, this patch only updates the console message, as ssleep() is already not present. Signed-off-by: Horms <horms@verge.net.au> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-28Merge nommu treeRussell King
2006-03-27[ARM] nommu: fixups for the exception vectorsHyok S. Choi
The high page vector (0xFFFF0000) does not supported in nommu mode. This patch allows the vectors to be 0x00000000 or the begining of DRAM in nommu mode. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25[ARM] 3030/2: fix permission check in the obscur cmpxchg syscallNicolas Pitre
Patch from Nicolas Pitre Quoting RMK: |pte_write() just says that the page _may_ be writable. It doesn't say |that the MMU is programmed to allow writes. If pte_dirty() doesn't |return true, that means that the page is _not_ writable from userspace. |If you write to it from kernel mode (without using put_user) you'll |bypass the MMU read-only protection and may end up writing to a page |owned by two separate processes. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22[ARM] Add panic-on-oops supportRussell King
Although you could ask the kernel for panic-on-oops, it remained non-functional because the architecture specific code fragment had not been implemented. Add it, so it works as advertised. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-14[ARM] 3105/4: ARM EABI: new syscall entry conventionNicolas Pitre
Patch from Nicolas Pitre For a while we wanted to change the way syscalls were called on ARM. Instead of encoding the syscall number in the swi instruction which requires reading back the instruction from memory to extract that number and polluting the data cache, it was decided that simply storing the syscall number into r7 would be more efficient. Since this represents an ABI change then making that change at the same time as EABI support is the right thing to do. It is now expected that EABI user space binaries put the syscall number into r7 and use "swi 0" to call the kernel. Syscall register argument are also expected to have "EABI arrangement" i.e. 64-bit arguments should be put in a pair of registers from an even register number. Example with long ftruncate64(unsigned int fd, loff_t length): legacy ABI: - put fd into r0 - put length into r1-r2 - use "swi #(0x900000 + 194)" to call the kernel new ARM EABI: - put fd into r0 - put length into r2-r3 (skipping over r1) - put 194 into r7 - use "swi 0" to call the kernel Note that it is important to use 0 for the swi argument as backward compatibility with legacy ABI user space relies on this. The syscall macros in asm-arm/unistd.h were also updated to support both ABIs and implement the right call method automatically. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-12[PATCH] arm: task_stack_page()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] arm: end_of_stack()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-03[ARM] Cleanup ARM includesRussell King
arch/arm/kernel/entry-armv.S has contained a comment suggesting that asm/hardware.h and asm/arch/irqs.h should be moved into the asm/arch/entry-macro.S include. So move the includes to these two files as required. Add missing includes (asm/hardware.h, asm/io.h) to asm/arch/system.h includes which use those facilities, and remove asm/io.h from kernel/process.c. Remove other unnecessary includes from arch/arm/kernel, arch/arm/mm and arch/arm/mach-footbridge. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30[ARM] Re-organise die()Russell King
Provide __die() which can be called from various contexts to provide an oops report. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-29[PATCH] mm: arm ready for split ptlockHugh Dickins
Prepare arm for the split page_table_lock: three issues. Signal handling's preserve and restore of iwmmxt context currently involves reading and writing that context to and from user space, while holding page_table_lock to secure the user page(s) against kswapd. If we split the lock, then the structure might span two pages, secured by to read into and write from a kernel stack buffer, copying that out and in without locking (the structure is 160 bytes in size, and here we're near the top of the kernel stack). Or would the overhead be noticeable? arm_syscall's cmpxchg emulation use pte_offset_map_lock, instead of pte_offset_map and mm-wide page_table_lock; and strictly, it should now also take mmap_sem before descending to pmd, to guard against another thread munmapping, and the page table pulled out beneath this thread. Updated two comments in fault-armv.c. adjust_pte is interesting, since its modification of a pte in one part of the mm depends on the lock held when calling update_mmu_cache for a pte in some other part of that mm. This can't be done with a split page_table_lock (and we've already taken the lowest lock in the hierarchy here): so we'll have to disable split on arm, unless CONFIG_CPU_CACHE_VIPT to ensures adjust_pte never used. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[ARM] 3035/1: RISCOS compat code fixNicolas Pitre
Patch from Nicolas Pitre From: Daniel Jacobowitz <dan@debian.org> > I also fixed a bug that confused me greatly while trying to debug: one > SIGILL has long been a SIGSEGV because of some broken RISCOS > compatibility code. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>