summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci
AgeCommit message (Collapse)Author
2011-09-07ARM: davinci: fix cache flush build errorLinus Walleij
The TNET variant of DaVinci compiles some code that it shares with other DaVinci variants, however it has a V6 CPU rather than an ARM926T, thus the hardcoded call to arm926_flush_kern_cache_all() in sleep.S will obviously fail, and we need to build with the v6_flush_kern_cache_all() call instead. This was triggered by manually altering the DaVinci config to build the TNET version. Cc: Dave Martin <dave.martin@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: stable@kernel.org
2011-09-07ARM: davinci: correct MDSTAT_STATE_MASKSergei Shtylyov
MDSTAT.STATE occupies bits 0..5 according to all available documentation, so fix the #define MDSTAT_STATE_MASK at last. Using the wrong value seems to have been harmless though... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-09-07ARM: davinci: da850 EVM: read mac address from SPI flashRajashekhara, Sudhakar
DA850/OMAP-L138 EMAC driver uses random mac address instead of a fixed one because the mac address is not stuffed into EMAC platform data. This patch provides a function which reads the mac address stored in SPI flash (registered as MTD device) and populates the EMAC platform data. The function which reads the mac address is registered as a callback which gets called upon addition of MTD device. NOTE: In case the MAC address stored in SPI flash is erased, follow the instructions at [1] to restore it. [1] http://processors.wiki.ti.com/index.php/GSG:_OMAP-L138_DVEVM_Additional_Procedures#Restoring_MAC_address_on_SPI_Flash Modifications in v2: Guarded registering the mtd_notifier only when MTD is enabled. Earlier this was handled using mtd_has_partitions() call, but this has been removed in Linux v3.0. Modifications in v3: a. Guarded da850_evm_m25p80_notify_add() function and da850evm_spi_notifier structure with CONFIG_MTD macros. b. Renamed da850_evm_register_mtd_user() function to da850_evm_setup_mac_addr() and removed the struct mtd_notifier argument to this function. c. Passed the da850evm_spi_notifier structure to register_mtd_user() function. Modifications in v4: Moved the da850_evm_setup_mac_addr() function within the first CONFIG_MTD ifdef construct. Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: stable@kernel.org
2011-07-26Merge branch 'next/devel' of ↵Linus Torvalds
ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits) ARM: S5P64X0: External Interrupt Support ARM: EXYNOS4: Enable MFC on Samsung NURI ARM: EXYNOS4: Enable MFC on universal_c210 ARM: S5PV210: Enable MFC on Goni ARM: S5P: Add support for MFC device ARM: EXYNOS4: Add support FIMD on SMDKC210 ARM: EXYNOS4: Add platform device and helper functions for FIMD ARM: EXYNOS4: Add resource definition for FIMD ARM: EXYNOS4: Change devname for FIMD clkdev ARM: SAMSUNG: Add IRQ_I2S0 definition ARM: SAMSUNG: Add platform device for idma ARM: EXYNOS4: Add more registers to be saved and restored for PM ARM: EXYNOS4: Add more register addresses of CMU ARM: EXYNOS4: Add platform device for dwmci driver ARM: EXYNOS4: configure rtc-s3c on NURI ARM: EXYNOS4: configure MAX8903 secondary charger on NURI ARM: EXYNOS4: configure ADC on NURI ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs ... Fix up tons of silly conflicts: - arch/arm/mach-davinci/include/mach/psc.h - arch/arm/mach-exynos4/Kconfig - arch/arm/mach-exynos4/mach-smdkc210.c - arch/arm/mach-exynos4/pm.c - arch/arm/mach-imx/mm-imx1.c - arch/arm/mach-imx/mm-imx21.c - arch/arm/mach-imx/mm-imx25.c - arch/arm/mach-imx/mm-imx27.c - arch/arm/mach-imx/mm-imx31.c - arch/arm/mach-imx/mm-imx35.c - arch/arm/mach-mx5/mm.c - arch/arm/mach-s5pv210/mach-goni.c - arch/arm/mm/Kconfig
2011-07-26Merge branch 'next/cross-platform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/cross-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: Consolidate the clkdev header files ARM: set vga memory base at run-time ARM: convert PCI defines to variables ARM: pci: make pcibios_assign_all_busses use pci_has_flag ARM: remove unnecessary mach/hardware.h includes pci: move microblaze and powerpc pci flag functions into asm-generic powerpc: rename ppc_pci_*_flags to pci_*_flags Fix up conflicts in arch/microblaze/include/asm/pci-bridge.h
2011-07-25Merge branch 'next/cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (133 commits) ARM: EXYNOS4: Change devname for FIMD clkdev ARM: S3C64XX: Cleanup mach/regs-fb.h from mach-s3c64xx ARM: S5PV210: Cleanup mach/regs-fb.h from mach-s5pv210 ARM: S5PC100: Cleanup mach/regs-fb.h from mach-s5pc100 ARM: S3C24XX: Use generic s3c_set_platdata for devices ARM: S3C64XX: Use generic s3c_set_platdata for OneNAND ARM: SAMSUNG: Use generic s3c_set_platdata for NAND ARM: SAMSUNG: Use generic s3c_set_platdata for USB OHCI ARM: SAMSUNG: Use generic s3c_set_platdata for HWMON ARM: SAMSUNG: Use generic s3c_set_platdata for FB ARM: SAMSUNG: Use generic s3c_set_platdata for TS ARM: S3C64XX: Add PWM backlight support on SMDK6410 ARM: S5P64X0: Add PWM backlight support on SMDK6450 ARM: S5P64X0: Add PWM backlight support on SMDK6440 ARM: S5PC100: Add PWM backlight support on SMDKC100 ARM: S5PV210: Add PWM backlight support on SMDKV210 ARM: EXYNOS4: Add PWM backlight support on SMDKC210 ARM: EXYNOS4: Add PWM backlight support on SMDKV310 ARM: SAMSUNG: Create a common infrastructure for PWM backlight support clocksource: convert 32-bit down counting clocksource on S5PV210/S5P64X0 ... Fix up trivial conflict in arch/arm/mach-imx/mach-scb9328.c
2011-07-24Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits) ARM: 7004/1: fix traps.h compile warnings ARM: 6998/2: kernel: use proper memory barriers for bitops ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM ARM: Fix build errors caused by adding generic macros ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU ARM: CPU hotplug: pass in proper affinity mask on IRQ migration ARM: GIC: avoid routing interrupts to offline CPUs ARM: CPU hotplug: fix abuse of irqdesc->node ARM: 6981/2: mmci: adjust calculation of f_min ARM: 7000/1: LPAE: Use long long printk format for displaying the pud ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence ARM: ARM_DMA_ZONE_SIZE is no more ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ...
2011-07-22Merge branch 'devel-stable' into for-nextRussell King
Conflicts: arch/arm/kernel/entry-armv.S
2011-07-22Merge branches 'btc', 'dma', 'entry', 'fixes', 'linker-layout', 'misc', ↵Russell King
'mmci', 'suspend' and 'vfp' into for-next
2011-07-21Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/bluetooth/l2cap_core.c
2011-07-19Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: davinci: DM365 EVM: fix video input mux bits ARM: davinci: Check for NULL return from irq_alloc_generic_chip arm: davinci: Fix low level gpio irq handlers' argument
2011-07-19ARM: Consolidate the clkdev header filesKyungmin Park
Now most of ARM machines has the alsmot same __clk_get/put() macro So place it at the arch/arm/include/asm/clkdev.h and remove the reduntant header files But some machines don't have the same form as above. It can use the machince specific clkdev file by HAVE_MACH_CLKDEV config Now there are only 3 caese. 1) define the clk structure with clkdev macro => Need to move clk structure to proper header file arch/arm/mach-versatile/include/mach/clkdev.h arch/arm/mach-realview/include/mach/clkdev.h arch/arm/mach-vexpress/include/mach/clkdev.h arch/arm/mach-integrator/include/mach/clkdev.h 2) export the __clk_get/put function at clock.c arch/arm/mach-shmobile/include/mach/clkdev.h 3) demuxing the clk source arch/arm/mach-u300/include/mach/clkdev.h Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-07-19davinci: DM365 EVM: fix video input mux bitsJon Povey
Video input mux settings for tvp7002 and imager inputs were swapped. Comment was correct. Tested on EVM with tvp7002 input. Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Acked-by: Manjunath Hadli <manjunath.hadli@ti.com> Cc: stable@kernel.org Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-19ARM: davinci: Check for NULL return from irq_alloc_generic_chipTodd Poynor
Avoid NULL dereference of irq_alloc_generic_chip return in low memory conditions. Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-18ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_sizeNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/bluetooth/l2cap_core.c
2011-07-12arm: davinci: Fix low level gpio irq handlers' argumentIdo Yariv
Commit 7416401 ("arm: davinci: Fix fallout from generic irq chip conversion") introduced a bug, causing low level interrupt handlers to get a bogus irq number as an argument. The gpio irq handler falsely assumes that the handler data is the irq base number and that is no longer true. Set the irq handler data to be a pointer to the corresponding gpio controller. The chained irq handler can then use it to extract both the irq base number and the gpio registers structure. Signed-off-by: Ido Yariv <ido@wizery.com> CC: Thomas Gleixner <tglx@linutronix.de> [nsekhar@ti.com: renamed "ctl" to "d", simplified indexing logic for chips and took care of odd bank handling in irq handler] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-08davinci: da850 evm: register SATA deviceSekhar Nori
Register the platform device for SATA interface present on the DA850/OMAP-L138/AM18x EVM. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-08davinci: da850: add support for SATA interfaceSekhar Nori
Add support for SATA controller on the DA850/OMAP-L138/AM18x devices. The patch adds the necessary clocks, platform resources and a routine to initialize the SATA controller. The PHY configuration in this patch is courtesy the work done by Zegeye Alemu, Swaminathan and Mansoor Ahamed from TI. While testing this patch, enable port multiplier support iff you are actually using one. The reasons of this behaviour are discussed here: http://patchwork.ozlabs.org/patch/78163/ ChangeLog: v3: Removed fields which were being initialized to zero in PHY configuration. Moved SATA base address definition to the top of the file to make it inline with what is done for the rest of the modules. v2: Addressed comments from Sergei. Removed unnecessary braces and removed unnecessary else after goto. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-08davinci: enable forced transitions on PSCSekhar Nori
Some DaVinci modules like the SATA on DA850 need forced module state transitions. Define a "force" flag which can be passed to the PSC config function to enable it to make forced transitions. Forced transitions shouldn't normally be attempted, unless the TRM explicitly specifies its usage. ChangeLog: v2: Modified to take care of the fact that davinci_psc_config() now takes the flags directly. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-08davinci: pass clock flags to davinci_psc_config()Sekhar Nori
Enabling or disabling a PSC can take certain modifiers like "disable with reset", "force enable/disable" and "enable/disable with local reset" apart from the regular clock gating functionality. Pass a flags argument to davinci_psc_config() so these variations can be supported there. At this time only "disable with reset" is supported, but other functionality will be added in subsequent patches. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-07genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)Simon Guinot
This fixes a regression introduced by e59347a "arm: orion: Use generic irq chip". Depending on the device, interrupts acknowledgement is done by setting or by clearing a dedicated register. Replace irq_gc_ack() with some {set,clr}_bit variants allows to handle both cases. Note that this patch affects the following SoCs: Davinci, Samsung and Orion. Except for this last, the change is minor: irq_gc_ack() is just renamed into irq_gc_ack_set_bit(). For the Orion SoCs, the edge GPIO interrupts support is currently broken. irq_gc_ack() try to acknowledge a such interrupt by setting the corresponding cause register bit. The Orion GPIO device expect the opposite. To fix this issue, the irq_gc_ack_clr_bit() variant is used. Tested on Network Space v2. Reported-by: Joey Oravec <joravec@drewtech.com> Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-06davinci: da850: add a .set_rate method to ref_clkChristian Riesch
This patch allows setting the input clock frequency of the SoC from the board specific code using the davinci_set_refclk_rate function. Suggested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-06davinci: dm6467/T EVM: fix setting up of reference clock rateSekhar Nori
The DM6467 and DM6467T EVMs use different reference clock frequencies. This difference is currently supported by having the SoC code call a public board routine which sets up the reference clock frequency. This does not scale as more boards are added. Instead, use the clk_set_rate() API to setup the reference clock frequency to a different value from the board file. Suggested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@ti.com>
2011-07-06davinci: psc.h: clean up indentation done using spacesSekhar Nori
psc.h has indentation using spaces at a number of places. Fix this by indenting using tabs instead. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-06-28ARM: entry: remove unused irq_prio_table macroRussell King
Platforms provide an empty irq_prio_table macro, and as nothing uses this macro, it can simply be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-21net: remove mm.h inclusion from netdevice.hAlexey Dobriyan
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually). To prevent mm.h inclusion via other channels also extract "enum dma_data_direction" definition into separate header. This tiny piece is what gluing netdevice.h with mm.h via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h". Removal of mm.h from scatterlist.h was tried and was found not feasible on most archs, so the link was cutoff earlier. Hope people are OK with tiny include file. Note, that mm_types.h is still dragged in, but it is a separate story. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08davinci: make PCM platform devices staticSekhar Nori
Make the PCM device structures used in devices.c and devices-da8xx.c static as they are used only in the respective files. This was found when trying to build a single image for DaVinci and DA8x devices using runtime P2V support. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-06-08arm: davinci: Fix fallout from generic irq chip conversionThomas Gleixner
The code which does the chained handler setup was overwriting chip_data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Holger Hans Peter Freyther <holger@freyther.de> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-05-25Merge branch 'davinci-next' of ↵Russell King
git://gitorious.org/linux-davinci/linux-davinci into devel-stable
2011-05-23Merge branch 'devel-stable' into for-linusRussell King
Conflicts: arch/arm/Kconfig arch/arm/mach-ns9xxx/include/mach/uncompress.h
2011-05-23Merge branches 'consolidate-clksrc', 'consolidate-flash', ↵Russell King
'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
2011-05-23davinci: move DM64XX_VDD3P3V_PWDN to devices.cManjunath Hadli
Move the definition of DM64XX_VDD3P3V_PWDN from hardware.h to devices.c since it is used only there. This also helps rid hardware.h of platform private stuff. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-05-19Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] remove redundant sprintf from request_module call. [CPUFREQ] cpufreq_stats.c: Fixed brace coding style issue [CPUFREQ] Fix memory leak in cpufreq_stat [CPUFREQ] cpufreq.h: Fix some checkpatch.pl coding style issues. [CPUFREQ] use dynamic debug instead of custom infrastructure [CPUFREQ] CPU hotplug, re-create sysfs directory and symlinks [CPUFREQ] Fix _OSC UUID in pcc-cpufreq
2011-05-12ARM: use ARM_DMA_ZONE_SIZE to adjust the zone sizesRussell King
Rather than each platform providing its own function to adjust the zone sizes, use the new ARM_DMA_ZONE_SIZE definition to perform this adjustment. This ensures that the actual DMA zone size and the ISA_DMA_THRESHOLD/MAX_DMA_ADDRESS definitions are consistent with each other, and moves this complexity out of the platform code. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-12ARM: Replace platform definition of ISA_DMA_THRESHOLD/MAX_DMA_ADDRESSRussell King
The values of ISA_DMA_THRESHOLD and MAX_DMA_ADDRESS are related; one is the physical/bus address, the other is the virtual address. Both need to be kept in step, so rather than having platforms define both, allow them to define a single macro which sets both of these macros appropraitely. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-11Merge branch 'irq-davinci' of ↵Russell King
git://gitorious.org/linux-davinci/linux-davinci into devel-stable
2011-05-11arm: davinci: Use generic irq chipThomas Gleixner
Simple conversion which simply uses the fact that the second irq chip base address has offset 0x04 to the first one. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-and-Tested-by: Kevin Hilman <khilman@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2011-05-07Merge branch 'zImage_fixes' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2011-05-07ARM: zImage: remove the static qualifier from global data variablesNicolas Pitre
To be able to relocate the .bss section at run time independently from the rest of the code, we must make sure that no GOTOFF relocations are used with .bss symbols. This usually means that no global variables can be marked static unless they're also const. Let's remove the static qualifier from current offenders, or turn them into const variables when possible. Next commit will ensure the build fails if one of those is reintroduced due to otherwise enforced coding standards for the kernel. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com>
2011-05-06DA8xx: move base address #define's to their proper placeSergei Shtylyov
Move DA8XX_MMCSD0_BASE, DA8XX_LCD_CNTRL_BASE, and DA8XX_DDR2_CTL_BASE from <mach/da8xx.h> to devices-da8xx.c as the latter file is the only place where these macros are used. While at it, restore sorting the base address macros by address value in devices-da8xx.c... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2011-05-06DA8xx: kill duplicate #define DA8XX_PLL1_BASESergei Shtylyov
Commit 044ca01521d077a35b46a445b02b93f413109a4b (davinci: da850/omap-l138: add support for SoC suspend) introduced DA8XX_PLL1_BASE despite PLL1 exists only on DA850/OMAP-L138 and da850.c even already #define'd DA850_PLL1_BASE. Kill the duplicate macro, renaming an existing reference to it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2011-05-06DA8xx: kill duplicate #define DA8XX_GPIO_BASESergei Shtylyov
DA8XX_GPIO_BASE is #define'd in both <mach/da8xx.h> and devices-da8xx.c; moreover, it's not even used in the latter file... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2011-05-04[CPUFREQ] use dynamic debug instead of custom infrastructureDominik Brodowski
With dynamic debug having gained the capability to report debug messages also during the boot process, it offers a far superior interface for debug messages than the custom cpufreq infrastructure. As a first step, remove the old cpufreq_debug_printk() function and replace it with a call to the generic pr_debug() function. How can dynamic debug be used on cpufreq? You need a kernel which has CONFIG_DYNAMIC_DEBUG enabled. To enabled debugging during runtime, mount debugfs and $ echo -n 'module cpufreq +p' > /sys/kernel/debug/dynamic_debug/control for debugging the complete "cpufreq" module. To achieve the same goal during boot, append ddebug_query="module cpufreq +p" as a boot parameter to the kernel of your choice. For more detailled instructions, please see Documentation/dynamic-debug-howto.txt Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2011-05-02Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: (47 commits) CLKDEV: Fix clkdev return value for NULL clk case ARM: 6891/1: prevent heap corruption in OABI semtimedop ARM: kprobes: Tidy-up kprobes-decode.c ARM: kprobes: Add emulation of hint instructions like NOP and WFI ARM: kprobes: Add emulation of SBFX, UBFX, BFI and BFC instructions ARM: kprobes: Add emulation of MOVW and MOVT instructions ARM: kprobes: Reject probing of undefined data processing instructions ARM: kprobes: Remove redundant code in space_1111 ARM: kprobes: Fix emulation of PLD instructions ARM: kprobes: Reject probing of SETEND instructions ARM: kprobes: Consolidate stub decoding functions ARM: kprobes: Reject probing of all coprocessor instructions ARM: kprobes: Fix emulation of USAD8 instructions ARM: kprobes: Fix emulation of SMUAD, SMUSD and SMMUL instructions ARM: kprobes: Fix emulation of SXTB16, SXTB, SXTH, UXTB16, UXTB and UXTH instructions ARM: kprobes: Reject probing of undefined media instructions ARM: kprobes: Add emulation of RBIT instruction ARM: kprobes: Reject probing of LDRB instructions which load PC ARM: kprobes: Fix emulation of LDRD and STRD instructions ARM: kprobes: Reject probing of LDR/STR instructions which update PC unpredictably ...
2011-04-26Revert wrong fixes for common misspellingsLucas De Marchi
These changes were incorrectly fixed by codespell. They were now manually corrected. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-04-25ARM: Davinci: Fix I2C build errorsRussell King - ARM Linux
Several Davinci platforms select the I2C EEPROM support, but don't select I2C support. This causes I2C EEPROM support to be built into the kernel, but I2C support may not be configured to be built in. This leads to linker errors due to missing I2C symbols. Arrange for I2C to be selected whenever EEPROM_AT24 is selected. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-04-25DA830: fix SPI1 base addressSergei Shtylyov
Commit 54ce6883d29630ff334bee4256a25e3f8719a181 (davinci: da8xx: add spi resources and registration routine) wrongly assumed that SPI1 is mapped at the same address on DA830/OMAP-L137 and DA850/OMAP-L138; actually, the base address was valid only for the latter SoC. Teach the code to pass the correct SPI1 memory resource for both SoCs... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-04-25davinci: mityomapl138: Use auto-probe to determine attached PHY IDMichael Williamson
Current board configurations involving the MityDSP-L138 and MityARM-1808 only have one attached PHY, but it's address may not be the same. Default the behavior to auto-probe for the PHY and use the first one found. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-04-25davinci: mityomapl138: Use correct id for NAND controllerMichael Williamson
For the MityDSP-L138/MityARM-1808 SOMS, the NAND controller id (which needs to correspond to the chipselect, and is used for controlling the HW ECC computation) is not correct. Fix it. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>