summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-exynos4
AgeCommit message (Collapse)Author
2011-10-04ARM: EXYNOS4: Add TVOUT support for SMDKV310Hatim Ali
Add support for TVOUT on SMDKV310 board. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Support suspend/resume for EXYNOS4212Jongpill Lee
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add PMU register definition for EXYNOS4212Jongpill Lee
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Modify PMU register setting functionJongpill Lee
This patch modifies PMU register setting function to support the other EXYNOS4 SoCs. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5PV210: Add support for M-5MOLS image sensor on UNIVERSAL_C210Sylwester Nawrocki
Add voltage regulator definitions for M-5MOLS camera, platform data definition for the sensor and MIPI-CSI receiver drivers. Add CAM power domain dependencies for FIMC and CSIS devices. Define required I2C0 bus timings. Setup camera port A GPIO. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: enable TV support on Universal_C210 boardTomasz Stanislawski
This patch adds platform devices and regulators for TV devices on Samsung Universal C210 board. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: S5P: add support for tv deviceTomasz Stanislawski
This patch adds all the resources for TV drivers and devices for Samsung Exynos4 and S5PV210 platforms. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [m.szyprowski: squashed Exynos4 and S5PV210 patches and rewrote commit message] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: SAMSUNG: add i2c hdmiphy controller definitionsTomasz Stanislawski
This patch adds hdmiphy dedicated i2c controller definitions. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [m.szyprowski: renamed to i2c-hdmiphy and squashed Exynos4 and S5PV210 patches] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04Merge branch 'next/topic-gpio-samsung' into next-samsung-develKukjin Kim
2011-10-04Merge branch 'next/topic-dma-samsung' into next-samsung-develKukjin Kim
2011-10-04ARM: EXYNOS4: Add support SMDK4412 BoardChanghwan Youn
SMDK4412 board is same as a SMDK4212 board except that it has EXYNOS4412 SoC, thus it can share machine code with SMDK4212. This patch renames mach-smdk4212.c to mach-smdk4x12.c to support both SMDK4212 and SMDK4412 board with one machine file. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add MCT support for EXYNOS4412Changhwan Youn
Current MCT implementation only provide 2 event timers, thus cannot support EXYNOS4412 which has 4 CPU cores. This patch fixes MCT implementation to support SoCs with 4 cores. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add functions for gic interrupt handlingChanghwan Youn
This patch adds two functions for gic interrupt handling. 1. Add interrupt handling of 4 cores. 2. Dynamically set gic bank offset according to the type of soc. Gic bank offset of EXYNOS4412 is 0x4000 while the offset of EXYNOS4210 and EXYNOS4212 is 0x8000. This patch is necessary because EXYNOS4 socs cannot support GIC register banking as described in commit aab74d3e75364. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add support clock for EXYNOS4412Changhwan Youn
This patch makes EXYNOS4412 use same clock code for EXYNOS4212 because the clock hierarchy of both SoCs are same. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add support new EXYNOS4412 SoCChanghwan Youn
This patch adds Samsung EXYNOS4412 SoC support. The EXYNOS4412 integrates a ARM Cortex A9 quad-core. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add support MCT PPI for EXYNOS4212Changhwan Youn
This patch implements clock event timer using MCT PPI and make EXYNOS4212 use MCT PPI instead of MCT SPI. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add support PPI in external GICChanghwan Youn
To support PPI in external GIC of EXYNOS4 SoCs, gic_arch_extn.irq_eoi, irq_unmask and irq_mask are fixed. This patch is necessary because external GIC of EXYNOS4 cannot support register banking. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: convert boot_params to atag_offsetTushar Behera
Based on "ARM: introduce atag_offset to replace boot_params" by Nicolas Pitre (2bb9839e312ed55a6d5824ffa6077ce3d7d63b1e). Since boot_params variable is deleted from machine_desc, the variable is modified in the newer board files. Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [kgene.kim@samsung.com: added fixing for smdkv310] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Enable MFC on Samsung SMDKV310Sachin Kamat
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Update config file of NURI to enable RTCChanwoo Choi
This patch update config file of NURI board to enable RTC Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: enable frame buffer on Nuri boardMarek Szyprowski
This patch adds platform definitions to enable s3c-fb driver. Framebuffer window with 1280x800x16bpp mode has been defined. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: enable frame buffer on Universal C210 boardMarek Szyprowski
This patch adds platform definitions to enable s3c-fb driver. Framebuffer window with 480x800x16bpp mode has been defined. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add HPD and PD support for HDMI on ORIGENSachin Kamat
This patch adds hot plug detection(HPD) and power domain(PD) support for HDMI on ORIGEN board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Add machine support for 7" LCD on ORIGENTushar Behera
ORIGEN board is fitted with 7" LCD panel HV070WSA. The pixel resolution of the LCD panel is 1024x600. Also power domain device for LCD0 is registered. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04ARM: EXYNOS4: Configure MAX8997 PMIC for ORIGENInderpal Singh
Configure MAX8997 PMIC and provide platform specific data for ORIGEN board. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add HDMI support for ORIGENSachin Kamat
This patch adds HDMI (TVout) support for ORIGEN board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add keypad support for ORIGENSachin Kamat
This patch adds keypad support for ORIGEN board as GPIO keys. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add support for secondary MMC port on ORIGENTushar Behera
Secondary MMC port on ORIGEN is connected to sdhci instance 0. Support for secondary MMC port is extended by registering sdhci instance 0. Since sdhci instance 2 can contain a bootable media, sdhci instance 0 is registered after instance 2. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [kgene.kim@samsung.com: Added comments in registering sdhci] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Fix sdhci card detection for ORIGENTushar Behera
Fix incorrect value of cd_type field in platform data for sdhci device. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add PWM backlight support on ORIGENGiridhar Maruthy
This patch adds support for LCD backlight using PWM timer on ORIGEN board. Signed-off-by: Giridhar Maruthy <giridhar.maruthy@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add FIMC device on ORIGEN boardSachin Kamat
This patch adds definitions to enable support for s5p-fimc driver on ORIGEN board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> [kgene.kim@samsung.com: re-ordering changes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add USB EHCI device to ORIGEN boardSachin Kamat
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> [kgene.kim@samsung.com: re-ordering changes in Kconfig] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03Merge branch 'next-samsung-board-v3.1' into next/topic-exynos4-devel-origenKukjin Kim
2011-10-01ARM: pm: let platforms select cpu_suspend supportArnd Bergmann
Support for the cpu_suspend functions is only built-in when CONFIG_PM_SLEEP is enabled, but omap3/4, exynos4 and pxa always call cpu_suspend when CONFIG_PM is enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-27ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driverSylwester Nawrocki
The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-26ARM: add an extra temp register to the low level debugging addruart macroNicolas Pitre
Some platforms (like OMAP not to name it) are doing rather complicated hacks just to determine the base UART address to use. Let's give their addruart macro some slack by providing an extra work register which will allow for much needed cleanups. This is basically a no-op as this commit is only adding the extra argument to the macro but no one is using it yet. Signed-off-by: nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-21ARM: SAMSUNG: Update the name of regarding Samsung GPIOKukjin Kim
According to gpio-samsung.c, this patch updates the name of regarding Samsung GPIO. Basically the samsung_xxx prefix is used in gpio-samsung.c instead of s3c_xxx, because unified name can reduce its complexity. Note: some s3c_xxx stil remains because it is used widely. It will be updated next time. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-19Merge branch 'next/topic-dma-pl330-devname-fix' into next/topic-dma-samsungKukjin Kim
Conflicts: arch/arm/mach-exynos4/clock.c arch/arm/mach-s5p64x0/clock-s5p6440.c arch/arm/mach-s5p64x0/clock-s5p6450.c arch/arm/mach-s5pc100/clock.c arch/arm/mach-s5pv210/clock.c
2011-09-19ARM: EXYNOS4: register the second instance of pl330 DMACAlim Akhtar
Platform data is provided for two instance of pl330 DMAC, but only one DMAC is register with amba_device. This patch register the second instance. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-19Merge branch 'samsung_dma' of git://git.infradead.org/users/vkoul/slave-dma ↵Kukjin Kim
into next/topic-dma-samsung
2011-09-16Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6-wd into devel-stableRussell King
Conflicts: arch/arm/mach-imx/mach-cpuimx27.c
2011-09-16Merge branch 'next-samsung-board-v3.1' into next-samsung-boardKukjin Kim
Conflicts: arch/arm/mach-exynos4/Kconfig
2011-09-16ARM: EXYNOS4: Add support SMDK4212 BoardKukjin Kim
This patch adds mach-smdk4212.c to support SMDK4212 board. Now it can support HSMMCs, I2Cs, RTC, WDT and Keypad. Other features will be supported next time. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-16ARM: EXYNOS4: Add support PM for EXYNOS4212Jonghwan Choi
This patch moves regarding clock stuff of PM into clock file to support PM on EXYNOS4210 and EXYNOS4212 with one single kernel image. Because some clock registers are different on each SoCs. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> [kgene.kim@samsung.com: use CONFIG_PM_SLEEP instead of CONFIG_PM] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-16ARM: EXYNOS4: Add support clock for EXYNOS4212Kukjin Kim
This patch splits EXYNOS4 clock code to EXYNOS4 common, EXYNOS4210 and EXYNOS4212 for supporting new EXYNOS4212 SoC with one kernel image. Of course, this patch adds some clock codes for EXYNOS4212 SoC. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-16ARM: EXYNOS4: Add support new EXYNOS4212 SoCKukjin Kim
This patch adds Samsung EXYNOS4212 SoC support. The EXYNOS4212 integrates a ARM Cortex A9 multi-core. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-16Merge branch 'next/topic-cleanup-smdkv310' into next/topic-add-exynos4212Kukjin Kim
2011-09-16Merge branch 'next/topic-cpuid-rev' into next/topic-add-exynos4212Kukjin Kim
2011-09-16Merge branch 'next/topic-cleanup-smdkv310' into next-samsung-cleanupKukjin Kim
2011-09-15ARM: EXYNOS4: fix incorrect pad configuration for keypad row linesThomas Abraham
The keypad controller requires a external pull-up for all the keypad row lines. Fix the incorrect pad configuration for keypad controller row lines by enabling the pad pull-up for the all row lines of the keypad controller. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-19 11:35:31 +0000